Concept V2.5 Lesson 14 Objectives: After completing this lesson, the learner will be able to:...
-
Upload
christina-hampton -
Category
Documents
-
view
212 -
download
0
Transcript of Concept V2.5 Lesson 14 Objectives: After completing this lesson, the learner will be able to:...
Concept V2.5
Lesson 14 Objectives:After completing this lesson, the learner will be
able to:– Utilize the special function blocks for configuring
analog hardware with special data types for Concept – Use special function blocks to scale analog values
into engineering units.
Concept V2.5
Concept provides a means to easily scale QUANTUM Analog I/O modules
Special data types were created to help with this scaling method
The two data types are ANL_IN and ANL_OUT Special function blocks representing I/O cards
were created using these data types These function blocks are found in the library
named ANA_IO
Concept V2.5
Analog ScalingI/O Configuration Group
Analog ScalingScaling Group
Concept V2.5
Analog Scaling Scaling Example
Concept V2.5
Concept V2.5