4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

SYSTEM NAME Concept+ Timber Heavy Grade 4.5kN

DESCRIPTION The Concept + Timber is a finished system providing strong, durable panels with the inherent character, warmth and beauty of timber flooring. Healthy, natural and easy to maintain, these timber panels epitomize the luxury of natural timber floors whilst allowing the functionality of an access floor with 100% underfloor accessibility.

The timber species are prefinished into a 600x600mm access floor panel, ensuring that your design maintains functional accessibility to the services in the underfloor space such as power, data, fire and hydraulics.

COMPLIANT STANDARDS Australian Standard AS4154/AS4155 Australian Standard AS1170 NATA Testing Certification ISO9239-1-2003 EN12825-2001 DIN4102-1-1998

CORE Urban Panel

FINISH Factory - Finish with an R10 lacquer.

CONSTRUCTION The panels consist of a lower sheet of 0.5mm galvanized steel that is adhered to the urban panel core and topped with the nominated finished timber.

TOLERANCE ±0.25mm and a flatness tolerance of ±0.5mm measured on a diagonal across the top of the panel

CONNECTION The panel is gravity held on top of the stringer assembly.

SIZE 600mm x 600mm

DEPTH 42mm

PERFORMANCE TO STANDARDS GUIDE PER AS4154 – 1993 AUSTRALIAN STANDARD – GENERAL ACCESS FLOORS

Load Level Panel (kg)

System (kg/m2 at 150mm FFH)

4.5kN Heavy Grade 18 54.1

STATIC PERFORMANCE (kN)

Concentrated Impact Ultimate

4.5 0.4 13.5

DYNAMIC PERFORMANCE (kN) - Passes

10 passes (wheel size 75x25mm)

10,000 passes (wheel size 150x50mm)

40,000 passes (wheel size 200x75mm)

4.4 3.3 2.25

Safety Factor: Panels must provide a minimum safety factor of three (3) times the concentrated load specified above in accordance with Australian Standards AS4154-1993

PEDESTAL SIZE 100mm x 100mm base plate

PEDESTAL CONSTRUCTION Hot dipped galvanised steel pedestal base and rod. Steel head assembly with ABS locating gasket.

PEDESTAL LOCKING The pedestals will be provided with an adjusting and locking nut to maintain the assembly at a selected height, which requires a deliberate action to change the height setting, and which prevents vibration displacement.

PEDESTAL FINISH Hot dipped galvanized finish.

PEDESTAL CONNECTION The panel is gravity held on top of the stringer assembly.

FINISHED FLOOR HEIGHT (FFH) The finished floor height of the access floor is measured from the sub floor to the top surface of the installed access floor.

STRINGER SIZE 31mm x 21mm x 1.2mm x 600mm

STRINGER CONSTRUCTION Rectangular steel welded tube with 1.6mm sponge rubber foam.

STRINGER FINISH Hot dipped galvanized finish.

STRINGER CONNECTION The stringer is screw fixed to the pedestal.

CONCEPT+ SERIES CONCEPT+ TIMBER

RECOMMENDED APPLICATIONS

GENERAL LEARNING CASINOS LIBRARIES BANKS OFFICE INSTITUTIONS

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

19

THE PANEL CONSTRUCTION

SIZE 600mm x 600mm

DEPTH 33mm

CONSTRUCTION The panels consist of a hardened steel top and bottom sheet plate with corrosion resistant protection, inside and out, encapsulating a structural cementitious core.

CORE Cementitious Compound

TOLERANCE ±0.25mm and a flatness tolerance of ±0.5mm measured on a diagonal across the top of the panel

FINISH ASP’s standard powder coated finish.

CONNECTION The panel is screw fixed to the pedestal head at all four corners

Machine WeldedInjected Cementitious Core

Hardened Steel Top Plate Moulded Steel Pan Bottom

SYSTEM NAME Icon X 3.0kN Medium Grade

DESCRIPTION Icon X is considered the classic system for commercial environments. It is widely used for power and data cable management.

COMPLIANT STANDARDS Australian Standard AS4154/AS4155 Australian Standard AS1170 NATA Testing Certification ISO9239-1-2003

SIZE 600mm x 600mm

DEPTH 33mm

CORE Cementitious Compound

FINISH ASP’s standard powder coated finish.

CONSTRUCTION The panels consist of a hardened steel top and bottom sheet plate with corrosion resistant protection, inside and out, encapsulating a structural cementitious core.

TOLERANCE ±0.25mm and a flatness tolerance of ±0.5mm measured on a diagonal across the top of the panel

CONNECTION The panel is screw fixed to the pedestal head at all four corners

PERFORMANCE TO STANDARDS GUIDE PER AS4154 – 1993 AUSTRALIAN STANDARD – GENERAL ACCESS FLOORS

Load Level Panel (kg)

System (kg/m2 at 150mm FFH)

3.0kN Medium Grade 13.5 40.9

STATIC PERFORMANCE (kN)

Concentrated Impact Ultimate

3.0 0.4 9.0

DYNAMIC PERFORMANCE (kN) - Passes

10 passes (wheel size 75x25mm)

10,000 passes (wheel size 150x50mm)

40,000 passes (wheel size 200x75mm)

2.7 2.7 2.25

Safety Factor: Panels must provide a minimum safety factor of three (3) times the concentrated load specified above in accordance with Australian Standards AS4154-1993

PEDESTAL SIZE 100mm x 100mm base plate

PEDESTAL CONSTRUCTION Hot dipped galvanised steel pedestal base, head and rod. Aluminium head assembly.

PEDESTAL LOCKING The pedestals will be provided with an adjusting and locking nut to maintain the assembly at a selected height, which requires a deliberate action to change the height setting, and which prevents vibration displacement.

PEDESTAL FINISH Hot dipped galvanized finish.

PEDESTAL CONNECTION The panel is screw fixed to the pedestal head at all four corners.

PEDESTAL FINISHED FLOOR HEIGHT (FFH) The finished floor height of the access floor is measured from the sub floor to the top surface of the installed access floor. Note: For FFH over 800mm, please see the ASP Icon Data Series.

ICON SERIES

ICON X RECOMMENDED APPLICATIONS

GENERAL LEARNING CASINOS LIBRARIES BANKS OFFICE INSTITUTIONS

Timber Veneered Surfaced Layer

Urban Core Panel

Reinforcing Steel Backplate

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

4

OUR ENVIRONMENTAL COMMITMENT

As a member of the Green Building Council of Australia (GBCA) and the US Green Building Council (USGBC), ASP Access Floors’ Environmental Policy outlines how ASP endeavours to use recycled materials, reduce its Carbon Footprint and optimise its supply chain.

The implementation of the policy will ensure ASP:

• Considers sustainability in all relevant decision making • Reduces their greenhouse gas emissions • Produces less waste and increase recycling The aim of this policy is to incorporate ecologically sustainable development principles in every facet of design, manufacturing and installation with the introduction of the following five key objectives:

AREAS OF FOCUS

The results from the LCA and the sensitivity analysis show potential improvements to reduce ASP’s access floor systems’ overall environmental impacts. Areas of focus include:

• The use of certified 100% hydroelectricity at the steel manufacturing plant

• Increasing the percentage of recycled cement in the cementitious core mix

• Finding more environmental alternatives to the panel core • Reducing the weight of the whole system to reduce both

production and distribution environmental impacts • The monitoring of freight services to ensure shipping methods

with the best available technology and least environmental impact are used

• Optimising distribution routes to eliminate unnecessary transport

• Substituting truck freight with rail freight where practical Beyond the scope of the study, ASP Access Floors is looking to set up a product stewardship programme to recover and recycle the access floor componentry at their end of their life.

ENVIRONMENTAL PRODUCT DECLARATION

ASP Access Floors are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®).

An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

For more information and to download a copy of our ICON or URBAN EPD® visit: https://www.environdec.com/EPD-Search

ASP Access Floors is a global leader in manufacturing, distribution, and installation of access flooring and is completely dedicated to complying with Environmental Standards and Regulations.

The primary mission of ASP Access Floors is to provide all of our clients with exceptional products and service. Through research and analysing current trends and problems which occur within access floors, ASP Access Floors has already developed some of the most unique and e!ective products on the market. In fact, we are the market leader in Australia and around the world, with global expansion currently in place.

COMPLIANCE

• ASP Access Floors operates under the guidelines of an Environmental Management System (EMS), compliant with international standard ISO 14001.

• ASP Access Floors environmental product declaration (EPD) is certified in accordance with ISO 14025 and EN 15804

• ASP Access Floors products comply with Australian Standard AS4154 along with international standards CISCA, EN 12825, PSA MOB and DIN.

Environmental Policy

We are the only access floor company in the Southern Hemisphere to have obtained an Environmental Product Declaration (EPD®)

“

“

AUSTRALASIA

!

Indoor Environment Quality

"

Recycled Content

#

Waste Management

Environmental Product Declaration

Life Cycle Analysis

$

PERFORMANCE OF SURFACE FINISH PER GB/T 18103-2013 & GB 18580-2017

PROPERTIES REQUIREMENTS RESULT MOISTURE CONTENT 5-14% 10.3 Pass IMPREGNATED PEEL The cumulative length of any of either side of a

plastic layer does not exceed 1/3 of the length of the layer. It shall be defined as qualified when 5 out of 6 specimens are qualified.

Pass

STATIC BENDING STRENGTH Unit MPa Mean ≥30 Min ≥24

Mean ≥56 Min ≥50.4

Pass

MODULUS OF ELASTICITY Unit MPa ≥ 4000

6080 Pass

ABRASION RESISTANCE OF SURFACE Unit g/100r ≤ 0.15 and paint film is not worn through.

0.07, paint film not worn out

Pass

POLUTION RESISTANCE OF SURFACE No pollution mark No pollution mark Pass FORMALDEHYDE EMISSION Unit mg/m3

E1: ≤0.124 0.015 Pass

SLIP RATING PER DIN 51130:2014-02 Classification: R10 SLIP RATING PER AS 4586-2013 Classification: P3

CARE & MAINTENANCE

CLEANING

Dust and grit should be removed daily from all timber floors using an antistatic mop. A damp mop can be used once a month using just mist water or a compatible Bona cleaning product. Avoid wet mopping and steam mops to extend the life of the floor’s coating.

In hospitality or other such environments, all spills must be cleaned as soon as possible to avoid damage to the timber surface. Similarly, in such areas where spills or concentrated traffic might be expected, preventative measures such as additional mats should be considered to reduce the impact upon the floor.

Follow this simple cleaning regimen combined with using felt pads on furniture feet and mats at entryways to avoid deep scratches.

RESTORATION

When it is believed that the surface of the floor has become worn, or there are frequent deep gouges, then it is necessary to refinish the floor. This can be achieved by simply sanding the floor back to an even finish using a 150-grit abrasive, taking care not to breach the finished surface, before applying a further coating of Bona Naturelle.