COMPUTER SCIENCE (PCMC)...2016/10/01 · C++ Manual I PUC (PCMC’s) Morarji Desai Residential...
Transcript of COMPUTER SCIENCE (PCMC)...2016/10/01 · C++ Manual I PUC (PCMC’s) Morarji Desai Residential...
A
PRACTICAL RECORD
BOOK
OF
COMPUTER SCIENCE (PCMC)
FIRST PUC
MORARJI DESAI RESIDENTIAL PU
SCIENCE COLLEGE, DUDDA, HASSAN
MORARJI DESAI RESIDENTIAL PUSCIENCE COLLEGE, DUDDA, HASSAN
This is to certify that Mr. / Mrs. ………………………………
has satisfactorily completed the course of experiments in practical
COMPUTER SCIENCE prescribed by the Pre-University,
Bangalore for FIRST PUC (P.C.M.C) course in the laboratory of
this college in the year 2018-19.
Signature of the Lecturer Head of the Department
Date: …………………..
Name of the Candidate: ………………………........
Register Number : ………………………........
Examination Centre : ………………………........
Date of Practical Examination: ………………….....
LLaabboorraattoorryy
CCeerrttiiffiiccaattee
CONTENTSPgmNo
Program Name PageNo
SECTION - A (C++)
01
Write a program to interchange the values of two variablesa. Using a third variable.b. Without using a third variable.
01
02 Write a program to find the area and circumference of a circle. 03
03 Write a program to find the area of a triangle given three sides. 04
04Write a program to convert days into years, months and days.(Hint: Assume all months have 30 days)
05
05Write a program to find the largest, smallest and second largest of three numbers usingsimple if statement.
06
06
Write a program to input the total amount in a bill, if the amount is greater than 1000 thediscount of 8% is given otherwise no discount is given, output the total amount, the discountamount and the final amount, use simple if statement.
07
07 Write a program to check whether a given year is a leap year or not using if- else statement. 08
08Write a program to input a character and find out whether it is a lower case or upper casecharacter using if-else statement.
09
09
Write a program to input the number of units of electricity consumed in a house andcalculate the final amount using nested-if statement. Use the following data for calculation
Units Consumed Cost< 30 Rs 3.50 / unit
>=30 and <50 Rs 4.25 / unit>=50 and < 100 Rs 5.25 / unit
>=100 Rs 5.85 /unit
10
10
Write a program to input the marks of four subjects, calculate the total percentage and outputthe result as either “First class”, or “Second class”, or “Pass class” or “Fails” using switchstatement.
Class Range %First Class Between 60 and 100%
Second Class Between 50 and 59%Pass Class Between 40 and 49%
Fails Less than 40%
11
11 Write a program to find the sum of all the digits of a number using while statement. 13
12Write a program to input principal amount, rate of interest and time period and calculatecompound interest using while statement. (Hint: CI = P * (1 + R / 100) T).
14
13 Write a program to check whether a given number is a power of 2. 15
14Write a program to check whether a given number is an Armstrong number using do-whilestatement (Hint: 153 = 13 + 53+ 33).
16
15 Write a program to find the factorial of a number using for statement. 17
16 Write a program to generate the Fibonacci sequence up to a limit using for statement. 18
17 Write a program to find the sum and average of “N” numbers. 19
18 Write a program to find the second largest of “N” numbers. 20
19 Write a program to arrange a list of numbers in ascending order. 21
20 Write a program to find the position of a given number in an array. 22
21 Write a program to sum of all the rows and the sum of all the columns of a matrix separately. 23
22 Write a program to find the sum of two compatible matrices. 24
23
Consider an array MARKS [20] [5] which stores the marks obtained by 20 students in 5subjects. Now write a program to:
a) Find the average marks obtained in each subjectb) Find the average marks obtained by every studentc) Find the number of students who have scored below 50 in their average
26
24 Write a program to check whether a given string is a palindrome or not. 28
25 Write a program to count the number of vowels and consonants in a string. 29
26 Write a program to find the GCD and LCM of two numbers using functions. 30
27 Write a program to find XY using functions. 31
28Write a program to input the register number, name and class of all the students in a classinto a structure and output the data in a tabular manner with proper heading
32
SECTION – B (SPREADSHEET)
01
Eight salesmen sell three products for a week. Using a spreadsheet create a sales report.The report should include the name of the salesman, Amount of sales for each product andthe salesman’s total sales in the format given below.
Sales for the Month
Name Total Amt.for product1
Total Amt.for product2
Total Amt.for product3
Total sales
a) Type in all text and numbers in the spreadsheet.b) Format all numbers as a currency.c) Center the spreadsheet headings across the spreadsheet.d) Format all text.e) Create formulas to display a total for each sales rep.f) Create formulas to display a total for each product.g) Create a formula to calculate the total sales for all sales rep's for the month.
34
02
Enter the following details for 10 employees Employee Code, Employee name, Basic salary,DA, HRA, Loans, Total salary and Tax.
Salary for the MonthEmployee
CodeEmployee
NameBasicSalary
DA HRA Loan TotalSalary
AnnualSalary
Tax
a) Type the Employee Code, Employee Name, Basic Salary and Loan amount datafor 10 employees in the spreadsheet.
b) Format all numbers as a currency.c) Center the spreadsheet headings across the spreadsheet.d) Format all text.
36
e) Create a formula to compute DA as 50% of the Basic salary and copy this to all thecells.
f) Create a formula to compute HRA as 12% of the Basic salary and copy this to all thecells.
g) Create a formula to compute Total salary and copy this to all the cells.h) If Total salary is greater than 500000, compute Tax as 20% of Total salary otherwise
10% of the Total salary using a formula.
03
Enter the following details for 10 Students Register Number, Name, Subject1 Marks,Subject2 Marks, Subject3 Marks, Subject4 Marks, Total Marks and Percentage.
Test Marks data of a ClassRegisterNumber Name
Subject1Marks
Subject2Marks
Subject3Marks
Subject4Marks
TotalMarks Percentage
a) Type the Register Number, Name and marks of four subjects for 10students in thespreadsheet.
b) Format all text and numeric data appropriately.c) Center the spreadsheet headings across the spreadsheet.d) Create a formula to compute the Total marks and copy this to all the cells.e) Create a formula to compute Percentage and copy this to all the cells.f) Create a formula to compute the highest and lowest score using a library
function.g) Draw a bar graph for Register Number against total marks.h) Draw Pie chart for one student showing his marks in different subject from total score
38
04
A housewife maintains the budget expenditure in a spreadsheet under the headingsIncome and Expenses. Income includes husband’s and Wife’s income separately underdifferent headings. Expenses include Rent, Bills, Household expenses and medical expenses.
Budget for the MonthIncome Expenses Total
Expenditure SavingsHusband Wife Rent Bills Household Medical
a) Type the Income and Expenses data for the entire month in the spreadsheet.b) Format all numbers as currency.c) Center the spreadsheet headings across the spreadsheet.d) Create a formula to compute the Total expenditure and copy this to all the cells.e) Create a formula to compute the savings and copy this to all the cells.f) Draw a bar graph to show expenditure under each heading.g) Draw Pie chart to show the distribution of salary.
41
SECTION-C (HTML)
01 Create a Web page to display your details using different tags. 44
02 Create a model Web site for your college making using different tags. 46
SECTION – A
C++
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 1 | P a g e
PROGRAM 1(a):
Write a C++ program to interchange the values of two variables using athird variable.
#include<iostream.h>
#include<conio.h>
void main( )
{
int a, b, temp;
clrscr( );
cout<<"Enter the two numbers";
cin>>a>>b;
cout<<"Before Interchanging : a = " <<a<<" and b = "<<b<<endl;
temp = a;
a = b;
b = temp;
cout<<"After Interchanging : a = " <<a<<" and b = "<<b<<endl;
getch();
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 2 | P a g e
PROGRAM 1(b):
Write a C++ program to interchange the values of two variables withoutusing third variable.
#include<iostream.h>
#include<conio.h>
void main( )
{
int a, b;
clrscr( );
cout<<"Enter the two numbers:"<<endl;
cin>>a>>b;
cout<<"Before Interchanging : a = " <<a<<" and b = "<<b<<endl;
a = a + b ;
b = a - b ;
a = a - b ;
cout<<"After Interchanging : a = " <<a<<" and b = "<<b<<endl;
getch();
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 3 | P a g e
PROGRAM 2:
Write a C++ program to find the area and circumference of a circle.
#include<iostream.h>
#include<conio.h>
void main( )
{
float rad, area, circum;
clrscr( );
cout<<"Enter the radius:";
cin>>rad;
area = 3.142 * rad * rad;
circum = 2 * 3.142 * rad;
cout<<"Area of circle = "<<area<<endl;
cout<<"Circumference of circle = "<<circum<<endl;
getch();
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 4 | P a g e
PROGRAM 3:
Write a C++ program to find the area of triangle given three sides.
#include<iostream.h>
#include<conio.h>
#include<math.h>
void main( )
{
float s1, s2, s3, s, area;
clrscr( );
cout<<"Enter the length of three sides:";
cin>>s1>>s2>>s3;
s = (s1 + s2+ s3)/2;
area = sqrt( s* (s-s1) * (s-s2) * (s-s3));
cout<<"Area of triangle = "<<area<<endl;
getch();
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 5 | P a g e
PROGRAM 4:
Write a C++ program to convert days into years, months and days.(Hint: Assume all months have 30 days)
#include<iostream.h>
#include<conio.h>
void main( )
{
int totaldays, days, year, month;
clrscr( );
cout<<"Enter the total days:";
cin>>totaldays;
year = totaldays/365;
totaldays = totaldays % 365;
month = totaldays/30;
days = totaldays % 30;
cout<<"Years = "<< years<<endl;
cout<<"Months = "<<month<<endl;
cout<<"Days = "<<days<<endl;
getch();
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 6 | P a g e
PROGRAM 5:
Write a C++ program to find the largest, smallest and second largest ofthree numbers using simple if statement.
#include<iostream.h>
#include<conio.h>
void main( )
{
int a, b, c;
int largest, smallest, seclargest;
clrscr( );
cout<<"Enter the three numbers"<<endl;
cin>>a>>b>>c;
largest = a; //Assume first number as largest
if(b>largest)
largest = b;
if(c>largest)
largest = c;
smallest = a; //Assume first number as smallest
if(b<smallest)
smallest = b;
if(c<smallest)
smallest = c;
seclargest = (a + b + c) - (largest + smallest);
cout<<"Smallest Number is = "<<smallest<<endl;
cout<<"Second Largest Number is = "<<seclargest<<endl;
cout<<"Largest Number is = "<< largest<<endl;
getch( );
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 7 | P a g e
PROGRAM 6:
Write a C++ program to input the total amount in a bill, if the amount isgreater than 1000, a discount of 8% is given. Otherwise, no discount is given.Output the total amount, discount and the final amount. Use simple if statement.
#include<iostream.h>
#include<conio.h>
void main( )
{
float TAmount, discount, FAmount ;
clrscr( );
cout<<"Enter the Total Amount"<<endl;
cin>>TAmount;
discount = 0; //Calculate Discount
if(TAmount>1000)
discount = (8/100.0) * TAmount;
FAmount = TAmount - discount; //Calculate Final Amount
cout<<"Total Amount = "<<TAmount<<endl;
cout<<"Discount = "<<discount<<endl;
cout<<"Final Amount = "<< FAmount<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 8 | P a g e
PROGRAM 7:
Write a C++ program to check whether a given year is a leap year not,
Using if - else statement.
#include<iostream.h>
#include<conio.h>
void main( )
{
int year ;
clrscr( );
cout<<"Enter the Year in the form YYYY"<<endl;
cin>>year;
if(year%4 ==0 && year%100!=0 || year%400 ==0)
cout<<year<<" is a leap year"<<endl;
else
cout<<year<<" is not leap year"<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 9 | P a g e
PROGRAM 8:
Write a C++ program to accept a character. Determine whether the
character is a lower-case or upper-case letter.
#include<iostream.h>
#include<conio.h>
void main( )
{
char ch ;
clrscr( );
cout<<"Enter the Character"<<endl;
cin>>ch;
if(ch>= 'A' && ch <='Z')
cout<<ch<<" is an Upper-Case Character"<<endl;
else
if(ch>= 'a' && ch <='z')
cout<<ch<<" is an Lower-Case Character"<<endl;
else
cout<<ch<<" is not an alphabet"<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
OUTPUT 3:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 10 | P a g e
PROGRAM 9:
Write a C++ program to input the number of units of electricity
consumed in a house and calculate the final amount using nested-if statement.
Use the following data for calculation.
Units consumed Cost< 30 Rs. 3.50 / Unit
>= 30 and < 50 Rs. 4.25 / Unit>= 50 and < 100 Rs. 5.25 / Unit
>= 100 Rs. 5.85 / Unit#include<iostream.h>#include<conio.h>void main( ){
int units ;float Billamount;clrscr( );cout<<"Enter the number of units consumed:"<<endl;cin>>units;if(units < 30)
Billamount = units * 3.50 ;elseif(units < 50)
Billamount = 29 * 3.50 + (units - 29) * 4.25 ;elseif(units < 100)
Billamount = 29 * 3.50 + 19 * 4.25 + (units - 49) * 5.25 ;else
Billamount = 29 * 3.50 + 19 * 4.25 + 49 * 5.25 + (units - 99) * 5.85 ;
cout<<"Total Units Consumed ="<<units<<endl;cout<<"Total Amount = "<<Billamount<<endl;getch( );
}OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 11 | P a g e
PROGRAM 10:
Write a C++ program to input the marks of four subjects. Calculate the
total percentage and output the result as either “First Class” or “Second Class”
or “Pass Class” or “Fail” using switch statement.
Class Range (%)First Class Between 60% to 100%
Second Class Between 50% to 59%Pass Class Between 40% to 49%
Fail Less than 40%#include<iostream.h>
#include<conio.h>
void main( )
{
int m1, m2, m3, m4, total, choice;
float per;
clrscr( );
cout<<"Enter the First subject marks:";
cin>>m1;
cout<<"Enter the Second subject marks:";
cin>>m2;
cout<<"Enter the Third subject marks:";
cin>>m3;
cout<<"Enter the Fourth subject marks:";
cin>>m4;
total = m1 + m2 + m3 + m4;
per = total / 4.0;
cout<<"Total Marks = "<<total<<endl;
cout<<"Percentage = "<<per<<endl;
choice = (int) per/10;
cout<<"The result of the student is: "<<endl;
switch(choice)
{
case 10:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 12 | P a g e
case 9:
case 8:
case 7:
case 6: cout<<"First Class "<<endl;
break;
case 5: cout<<"Second Class"<<endl;
break;
case 4: cout<<"Pass Class"<<endl;
break;
default: cout<<"Fail"<<endl;
}
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 13 | P a g e
PROGRAM 11:
Write a C++ program to find sum of all the digits of a number using while
statement.
#include<iostream.h>
#include<conio.h>
void main( )
{
int num, sum, rem;
clrscr( );
cout<<"Enter the Number"<<endl;
cin>>num;
sum = 0;
while(num!=0)
{
rem = num % 10;
sum = sum + rem;
num = num/10;
}
cout<<"Sum of the digits is "<<sum<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 14 | P a g e
PROGRAM 12:
Write a C++ program to input principal amount, rate of interest and time
period. Calculate compound interest using while statement.
(Hint: Amount = P * (1 + R/100)T, Compound Interest = Amount – P)
#include<iostream.h>
#include<conio.h>
void main( )
{
float pri, amt, priamt, rate, ci;
int time, year;
clrscr( );
cout<<"Enter the Principal amount, rate of interest and time:"<<endl;
cin>>pri>>rate>>time;
year = 1;
priamt = pri;
while(year <= time)
{
amt = pri * (1 + rate/100);
pri=amt;
year ++;
}
ci = amt - priamt;
cout<<"Compound Interest = "<<ci<<endl;
cout<<"Net Amount = "<<amt<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 15 | P a g e
PROGRAM 13:
Write a C++ program to check whether the given number is power of 2.
#include<iostream.h>
#include<conio.h>
void main( )
{
int num, m, flag;
clrscr( );
cout<<"Enter the Number"<<endl;
cin>>num;
m = num;
flag = 1;
while(num>2)
if(num % 2 ==1)
{
flag = 0;
break;
}
else
num = num/2;
if(flag)
cout<<m<<" is power of 2 "<<endl;
else
cout<<m<<" is not power of 2 "<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 16 | P a g e
PROGRAM 14:
Write a C++ program to check whether the given number is an
Armstrong Number using do-while statement. (Hint: 153 = 13 + 53 + 33)
#include<iostream.h>
#include<conio.h>
void main( )
{
int num, rem, sum, temp;
clrscr( );
cout<<"Enter the three digit number"<<endl;
cin>>num;
temp = num;
sum = 0;
do
{
rem = temp % 10;
sum = sum + rem * rem * rem;
temp = temp / 10;
}while(temp!=0);
if(sum == num)
cout<<num<<" is an Armstrong Number "<<endl;
else
cout<<num<<" is not an Armstrong Number "<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 17 | P a g e
PROGRAM 15:
Write a C++ program to find the factorial of a number using for
statement. (Hint: 5! = 5 * 4 * 3 * 2 * 1 = 120)
#include<iostream.h>
#include<conio.h>
void main( )
{
int num, fact, i;
clrscr( );
cout<<"Enter the number"<<endl;
cin>>num;
fact = 1;
for( i = 1; i<= num; i++)
fact = fact * i;
cout<<" The factorial of a "<<num<<"! is: "<<fact<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 18 | P a g e
PROGRAM 16:
Write a C++ program to generate the Fibonacci sequence up to a limit
using for statement. (Hint: 5 = 0 1 1 2 3)
#include<iostream.h>
#include<conio.h>
void main( )
{
int num, first, second, count, third;
clrscr( );
cout<<"Enter the number limit for Fibonacci Series"<<endl;
cin>>num;
first = 0;
second = 1;
cout<<first<<"\t"<<second;
third = first + second;
for( count = 2; third<=num; count++)
{
cout<<"\t"<<third
first = second;
second = third;
third = first + second;
}
cout<<"\n Total terms = "<<count<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 19 | P a g e
PROGRAM 17:
Write a C++ program to find the sum and average of n number of the
array.
#include<iostream.h>
#include<conio.h>
#include<iomanip.h>
void main( )
{
int a[50], i, n, sum;
float avg;
clrscr();
cout<<"How many elements?"<<endl;
cin>>n;
cout<<"Enter the elements:"<<endl;
for(i=0; i<n; i++)
cin>>a[i];
sum = 0;
for(i=0; i<n; i++)
sum = sum + a[i];
avg=(float) sum / n;
cout<<"Sum = "<<sum<<endl;
cout<<"Average = "<<avg<<endl;
getch( );
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 20 | P a g e
PROGRAM 18:
Write a C++ program to find the second largest of n number in the array.
#include<iostream.h>#include<conio.h>#include<iomanip.h>void main( ){
int a[50], i, n, largest, secondlar;clrscr( );cout<<"How many elements?"<<endl;cin>>n;cout<<"Enter the elements:"<<endl;for(i=0; i<n; i++)
cin>>a[i];if(a[0] > a[1]){
largest = a[0];secondlar = a[1];
}else{
largest=a[1];secondlar=a[0];
}for(i=2; i<n; i++)if(a[i] > largest){
secondlar = largest;largest = a[i];
}elseif(a[i] > secondlar)
secondlar = a[i];cout<<"Largest = "<<largest<<endl;cout<<"Second Largest = "<<secondlar<<endl;getch( );
}OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 21 | P a g e
PROGRAM 19:
Write a C++ program to arrange a list of numbers in ascending order.
Sorting: The process of arrangement of data items in ascending or descending order is called
sorting.
#include<iostream.h>
#include<conio.h>
#include<iomanip.h>
void main( )
{
int a[50], i, temp, j, n;
clrscr( );
cout<<"Enter the number of elements:"<<endl;
cin>>n;
cout<<"Enter the elements:"<<endl;
for(i=0; i<n; i++)
cin>>a[i];
for(i=1; i<n; i++)
{
for(j=0; j<n-i; j++)
if(a[j] > a[j+1])
{
temp = a[j];
a[j] = a[j+1];
a[j+1] = temp;
}
}
cout<<"The sorted elements are:"<<endl;
for(i=0; i<n; i++)
cout<<a[i]<<"\t";
getch( );
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 22 | P a g e
PROGRAM 20:
Write a C++ program to find position of a given number in the array.
Searching: The process of finding the position of a data item in the given collection of data items is
called searching.
#include<iostream.h>#include<conio.h>#include<iomanip.h>void main( ){
int a[50], i, pos, ele, n;clrscr( );cout<<"Enter the number of elements:"<<endl;cin>>n;cout<<"Enter the elements:"<<endl;for(i=0; i<n; i++)
cin>>a[i];cout<<"Enter the search element:"<<endl;cin>>ele;pos=-1;for(i=0; i<n; i++)
if(ele == a[i]){
pos = i;break;
}if(pos >= 0)
cout<<ele<<" is present at position "<<pos<<endl;else
cout<<ele<<" is not present"<<endl;getch( );
}OUTPUT 1: OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 23 | P a g e
PROGRAM 22:
Write a C++ program to sum of all the row and sum of all the column in
matrices separately.
#include<iostream.h>#include<conio.h>void main( ){
int a[5][5], r, c, i, j, rsum, csum;clrscr( );cout << "Enter the order of matrix: ";cin >> r>>c;
// Storing elements of matrix entered by user.cout << "Enter elements of the matrix: " << endl;for (i = 0; i < r; i++)
for (j = 0; j < c; j++)cin >> a[i][j];
for(i = 0; i < r; i++){
rsum = 0;for(j = 0; j < c; j++)
rsum = rsum + a[i][j];cout<<"Sum of row no "<<i+1<<" = "<<rsum<<endl;
}for(i = 0; i < c; i++){
csum = 0;for(j = 0; j < r; j++)
csum = csum + a[j][i];cout<<"Sum of column no "<<i+1<<" = "<<csum<<endl;
}getch( );
}OUTPUT 1:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 24 | P a g e
PROGRAM 23:
Write a C++ program to find the sum of two compatible matrices:
#include<iostream.h>
#include<conio.h>
void main( )
{
int a[5][5], b[5][5], sum[5][5], r1, c1, r2, c2, i, j;
clrscr( );
cout << "Enter the order of first matrix: ";
cin >> r1>>c1;
cout << "Enter the order of second matrix: ";
cin >> r2>>c2;
// Storing elements of first matrix entered by user.
cout << "Enter elements of 1st matrix: " << endl;
for (i = 0; i < r1; i++)
for (j = 0; j < c1; j++)
cin >> a[i][j];
// Storing elements of second matrix entered by user.
cout << "Enter elements of 2nd matrix: " << endl;
for(i = 0; i < r2; i++)
for(j = 0; j < c2; j++)
cin >> b[i][j];
if ( (r1 == r2) && (c1==c2))
{
for(i = 0; i < r1; i++)
for(j = 0; j < c1; j++)
sum[i][j] = a[i][j] + b[i][j]; // Adding Two matrices
cout << "Sum of two matrix is: " << endl;
for(i = 0; i < r1; i++)
{
for(j = 0; j < c1; j++)
cout << sum[i][j] << "\t"; // Displaying the resultant sum matrix.
cout << endl;
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 25 | P a g e
}
}
else
cout<<"Matrices are not compatible..."<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 26 | P a g e
PROGRAM 24:
Consider an array MARKS [20[5] which stores the marks obtained by 20
students in 5 subjects. Now write a program to:
a) Find the average marks obtained in each subject.
b) Find the average marks obtained by every student
c) Find the number of students who have scored below 50 in their
average.
#include<iostream.h>
#include<conio.h>
void main( )
{
int marks[20][5], n, s, total, count=0, i, j;
float average;
clrscr( );
cout << "Enter the number of students: ";
cin >> n;
cout << "Enter the number of subjects: ";
cin >> s;
cout << "Enter the marks: " << endl;
for (i = 0; i < n; i++)
for (j = 0; j < s; j++)
cin >> marks[i][j];
cout<<endl<<"Average of Subjects"<<endl;
cout<<"Sub1\tSub2\tSub3\tSub4\tSub5"<<endl;
for(i = 0; i < s; i++)
{
total = 0;
for(j = 0; j < n; j++)
total = total + marks[j][i];
average = total/n;
cout<<average<<"\t";
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 27 | P a g e
}
cout<<endl<<"Average of students:"<<endl;
cout<<"\tStudent\tAverage"<<endl;
for(i = 0; i < n; i++)
{
total = 0;
for(j = 0; j < s; j++)
total = total + marks[i][j];
average = total/s;
if(average<50)
count++;
cout<<" \t"<<i+1<<"\t"<<average<<endl;
}
cout<<endl<<"Number of students less than average is "<<count<<endl;
getch( );
}
OUTPUT:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 28 | P a g e
PROGRAM 25:
Write a C++ program to determine whether the string is a palindrome.
#include<iostream.h>
#include<conio.h>
#include<string.h>
void main( )
{
char s[100], r[100]; //s is the string and r is the reserved string
clrscr( );
cout<<"Enter the String:";
cin.getline(s, 100);
strcpy (r, s); // Copy the characters of the string s to r
strrev (r); // Reverse the characters of the string r
if(strcmpi(s, r) == 0)
cout<<"It is palindrome"<<endl;
else
cout<<"It is not palindrome"<<endl;
getch( );
}
OUTPUT 1:
OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 29 | P a g e
PROGRAM 26:
Write a C++ program to count the number of vowels and consonants in a
string.
#include<iostream.h>
#include<conio.h>
#include<string.h>
#include<ctype.h>
void main( )
{
char s[100];
int len, i, cons=0, vow=0;
clrscr( );
cout<<"Enter the string:";
cin.getline(s,100);
len=strlen(s);
for(i=0;i<len;i++)
if( isalpha (s[i]) )
switch (toupper (s[i]) )
{
case'A':
case'E':
case'I':
case'O':
case'U': vow++;
break;
default: cons++;
}
cout<<"Number of Vowles:"<<vow<<endl;
cout<<"Number of Consonants:"<<cons<<endl;
getch();
}
OUTPUT 1: OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 30 | P a g e
PROGRAM 27:
Write a C++ program to find the GCD and LCM of two numbers using
functions.
#include<iostream.h>
#include<conio.h>
void main( )
{
int gcd(int, int); //Function Prototype
int a, b, g, lcm;
clrscr( );
cout<<"Enter two number:"<<endl;
cin>>a>>b;
g = gcd(a,b);
lcm = (a * b)/g;
cout<<"GCD of "<<a<<" and "<<b<<" is "<<g<<endl;
cout<<"LCM of "<<a<<" and "<<b<<" is "<<lcm<<endl;
getch( );
}
int gcd( int x, int y)
{
int rem;
while(y != 0)
{
rem = x % y;
x = y;
y = rem;
}
return(x);
}
OUTPUT 1: OUTPUT 2:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 31 | P a g e
PROGRAM 28:
Write a C++ program to find Xy using functions.
#include<iostream.h>
#include<conio.h>
void main( )
{
float power(float,int);
float x;
int y;
clrscr( );
cout<<"Enter the Base and Exponent:"<<endl;
cin>>x>>y;
cout<<x<<" to the power of "<<y<<" ="<<power(x,y)<<endl;
getch( );
}
float power(float a, int n)
{
if(a==0)
return 0.0;
if(n==0)
return 1.0;
else
if(n>0)
return(a * power(a,n-1));
else
return(power(a, n+1)/a);
}
OUTPUT 1:
OUTPUT 2: OUTPUT 3:
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 32 | P a g e
PROGRAM 30:
Write a C++ program to input the register number, name and class of all
the students in a class into a structure and output the data in a tabular manner
with proper heading.
#include<iostream.h>
#include<conio.h>
struct student
{
int regno;
char name[15];
char section[4];
};
void main( )
{
student s[50];
int i, j, n;
clrscr( );
cout<<"How many students?"<<endl;
cin>>n;
for(i=0; i<n; i++)
{
cout<<"Enter the Reg No of the Student "<<i+1<<":";
cin>>s[i].regno;
cout<<"Enter the Name of the Student "<<i+1<<":";
cin>>s[i].name;
cout<<"Enter the Class of the Student "<<i+1<<":";
cin>>s[i].section;
}
cout<<"REG_NO \t NAME \t CLASS \t"<<endl;
for(i=0; i<n; i++)
cout<<s[i].regno<<"\t"<<s[i].name<<"\t"<< s[i].section<<endl;
getch( );
}
C++ Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 33 | P a g e
OUTPUT:
SECTION– B
SPREADSHEET
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 34 | P a g e
PROGRAM 1:
Eight salesmen sell three products for a week. Using a spreadsheet create a sales
report. The report should include the name of the salesman, Amount of sales for each product
and the salesman’s total sales in the format given below.
Sales for the Month
Name Total Amt. forproduct1
Total Amt. forproduct2
Total Amt. forproduct3
Total sales
a) Type in all text and numbers in the spreadsheet.
b) Format all numbers as a currency.
c) Center the spreadsheet headings across the spreadsheet.
d) Format all text.
e) Create formulas to display a total for each sales rep.
f) Create formulas to display a total for each product.
g) Create a formula to calculate the total sales for all sales rep's for the month.
Solution: Click on Start ProgramsMicrosoft OfficeMicrosoft Office Excel 2007.
This will open a new excel workbook displaying a blank Excel worksheet.
a) To Type in all text and numbers in the spreadsheet.
Now enter data of eight salesmen in the worksheet.
b) To Format all numbers as a currency.
i. Select the range B3:D10
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
iii. Select the Number tab and choose proper Currency from the category list box.
iv. Click on OK.
c) To Center the spreadsheet headings across the spreadsheet.
Select the range A1:E1 then choose Home AlignmentMerge & Center.
d) To Format all text.
i. Select the range.
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
iii. Select the Alignment tab and choose Center from the Horizontal list box. Select Center
from the vertical list box.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 35 | P a g e
iv. Click on OK.
e) Create formulas to display a total for each sales rep.
i. Enter the formula into cell E3.
= B3 + C3+ D3 or = SUM (B3:D3)
ii. Copy the formula (=B3 + C3+ D3) to cells from E4 to E10.
f) Create formulas to display a total for each product.
i. Enter the formula into cell B12.
= SUM (B3:B10)
ii. Copy the formula (=B3 + C3+ D3) to cells from C10 to D10.
g) Create a formula to calculate the total sales for all sales rep's for the month.
i. Enter the formula into cell C13.
= SUM (B3:D10)
OUTPUT:
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 36 | P a g e
PROGRAM 2:
Enter the following details for 10 employees Employee Code, Employee name, Basic
salary, DA, HRA, Loans, Total salary and Tax.
Salary for the MonthEmployee
CodeEmployee
NameBasicSalary DA HRA Loan
TotalSalary
AnnualSalary Tax
a) Type the Employee Code, Employee Name, Basic Salary and Loan amount data for 10employees in the spreadsheet.
b) Format all numbers as a currency.c) Center the spreadsheet headings across the spreadsheet.d) Format all text.e) Create a formula to compute DA as 50% of the Basic salary and copy this to all the cells.f) Create a formula to compute HRA as 12% of the Basic salary and copy this to all the cells.g) Create a formula to compute Total salary and copy this to all the cells.h) If Total salary is greater than 500000, compute Tax as 20% of Total salary otherwise 10% of
the Total salary using a formula.
Solution: Click on Start ProgramsMicrosoft OfficeMicrosoft Office Excel 2007.
This will open a new excel workbook displaying a blank Excel worksheet.
a) To Type the Employee Code, Employee Name, Basic Salary and Loan amount datafor 10 employees in the spreadsheet.Now enter 10 employees’ data in the worksheet.
b) To Format all numbers as a currency.
i. Select the range C3:112
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
iii. Select the Number tab and choose proper Currency from the category list box.
iv. Click on OK.
c) To Center the spreadsheet headings across the spreadsheet.
Select the range A1:I1 then choose Home AlignmentMerge & Center.
d) To Format all text.
i. Select the range.
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 37 | P a g e
iii. Select the Alignment tab and choose Center from the Horizontal list box. Select Center
from the vertical list box.
iv. Click on OK.
e) Create a formula to compute DA as 50% of the Basic salary and copy this to all the cells.
i. Enter the formula into cell D3.
= C3 * 50%
ii. Copy the formula (== C3 * 50%) to cells from D4 to D12.
f) Create a formula to compute HRA as 12% of the Basic salary and copy this to all the
cells.
i. Enter the formula into cell E3.
= C3 * 12%
ii. Copy the formula (= C3 * 12%) to cells from E4 TO E12.
g) Create a formula to compute Total salary and copy this to all the cells.
i. Enter the formula into cell G3.
= C3 + D3 + E3 – F3
ii. Copy the formula (= C3 + D3 + E3 – F3) to cells from G4 to G12.
i) If Total salary is greater than 500000, compute Tax as 20% of Total salary otherwise10% of the Total salary using a formula.i. Enter the formula into cell H3.
= G3 * 12
ii. Copy the formula (= G3 * 12) to cells from H4 to H12.
iii. Enter the formula into cell I3.
iv. =IF (H3>=500000, H3*20%, H3*10%)
v. Copy the formula (=IF (H3>=500000, H3*20%, H3*10%)) to cells from I4 to I12.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 38 | P a g e
PROGRAM 3:
Enter the following details for 10 Students Register Number, Name, Subject1 Marks,
Subject2 Marks, Subject3 Marks, Subject4 Marks, Total Marks and Percentage.
Test Marks data of a ClassRegisterNumber Name
Subject1Marks
Subject2Marks
Subject3Marks
Subject4Marks
TotalMarks Percentage
a) Type the Register Number, Name and marks of four subjects for 10students in the spreadsheet.
b) Format all text and numeric data appropriately.
c) Center the spreadsheet headings across the spreadsheet.
d) Create a formula to compute the Total marks and copy this to all the cells.
e) Create a formula to compute Percentage and copy this to all the cells.
f) Create a formula to compute the highest and lowest score using a library function.
g) Draw a bar graph for Register Number against total marks.
h) Draw Pie chart for one student showing his marks in different subject from total score.
Solution: Click on Start ProgramsMicrosoft OfficeMicrosoft Office Excel 2007.
This will open a new excel workbook displaying a blank Excel worksheet.
a) To Type the Register Number, Name, Marks of four subjects for 10 students in thespreadsheet.Now enter 10 students’ data in the worksheet.
b) To Format all text and numeric data appropriately as a currency.
i. Select the range B3:J12
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
iii. Select the Alignment tab and choose proper alignment from the category list box.
iv. Click on OK.
c) To Center the spreadsheet headings across the spreadsheet.
Select the range A1:j1 then choose Home AlignmentMerge & Center.
d) Create a formula to compute the Total marks and copy this to all the cells.
i. Enter the formula into cell G3.
= SUM (C3:F3)
ii. Copy the formula (=SUM (C3:F3)) to cells from G4 to G12.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 39 | P a g e
e) Create a formula to compute Percentage and copy this to all the cells.
i. Enter the formula into cell H3.
= AVERAGE (C3:F3)
ii. Copy the formula (= AVERAGE (C3:F3)) to cells from H4 to H12.
f) Create a formula to compute the highest and lowest score using a library function.
i. Enter the formula into cell I3.
= MAX (C3:F3)
ii. Copy the formula (= MAX (C3:F3)) to cells from I4 TO I12.
iii. Enter the formula into cell J3.
= MIN (C3:F3)
iv. Copy the formula (= MIN (C3:F3)) to cells from J4 TO J12.
g) To draw a bar graph for Register Number against total marks.
i. Select the range of cells containing the data that you want to display in a chart. G3:G12
ii. Select the chart type form the Insert Charts Bar.
iii. Adding Chart Title: Layout Labels Chart Title.
iv. Adding Axes Title: Layout Labels Axes Title.
a. X-Axis Title: Register Number
b. Y-Axis Title: Total Marks
v. Change Legend Series Name:
a. To add series name, choose Design Select Data. Select the series name and click
the edit button. In Edit Series Dialog box, type the series name as Total Marks.
b. To add register numbers to the chart choose Design Select Data. To Select Axis
label range, click on the cell A1 and drag the cell pointer to A12.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 40 | P a g e
j) To Draw Pie chart for one student showing his marks in different subject from total
score.
i. Select the range of cells containing the data that you want to display in a chart. C3:E3
ii. Select the chart type form the Insert Charts Pie.
iii. Select the appropriate chart title and other chart components.
0 100 200 300 400 500
101
102
103
104
105
106
107
108
109
110
Total Marks
Regi
ster
Num
ber
Total Marks
Total Marks
89
9888
91
Shruthi
Subject1 Marks
Subject2 Marks
Subject3 Marks
Subject4 Marks
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 41 | P a g e
PROGRAM 4:
A housewife maintains the budget expenditure in a spreadsheet under the headings
Income and Expenses. Income includes husband’s and Wife’s income separately under
different headings. Expenses include Rent, Bills, Household expenses and medical expenses.
Budget for the MonthIncome Expenses Total
Expenditure SavingsHusband Wife Rent Bills Household Medical
a) Type the Income and Expenses data for the entire month in the spreadsheet.
b) Format all numbers as currency.
c) Center the spreadsheet headings across the spreadsheet.
d) Create a formula to compute the Total expenditure and copy this to all the cells.
e) Create a formula to compute the savings and copy this to all the cells.
f) Draw a bar graph to show expenditure under each heading.
g) Draw Pie chart to show the distribution of salary.
Solution: Click on Start ProgramsMicrosoft OfficeMicrosoft Office Excel 2007.
This will open a new excel workbook displaying a blank Excel worksheet.
a) To Type the Day Number, Husband and wife salaries, expenses for 7 days in the
spreadsheet.
Now enter 7 days income the expenses data in the worksheet.
b) To Format all numbers as a currency.
i. Select the range B4:111
ii. Home cells Format Format Cells or Right click on the range, select Format cells
from the short-cut menu, a Format cells window appears on the screen.
iii. Select the Number tab and choose proper Currency from the category list box.
iv. Click on OK.
c) To Center the spreadsheet headings across the spreadsheet.
Select the range A1:I1 then choose Home AlignmentMerge & Center.
d) Create a formula to compute the Total expenditure and copy this to all the cells.
i. Enter the formula into cell H3.
=SUM (D4:G4)
This formula gives you the expenses of the Day 1.
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 42 | P a g e
ii. Copy the formula (=SUM (D4:G4)) to cells from H5 to H10.
iii. Enter the formula into cell B11
=SUM (B4:B10)
iv. Copy the formula (=SUM (B4:B10)) to cells from C11 to H11.
e) Create a formula to compute the savings and copy this to all the cells.
i. Enter the formula into cell I11.
= B11 +C11-H11
ii. Copy the formula (= C3 * 12%) to cells from E4 TO E12.
f) Create a formula to compute Total salary and copy this to all the cells.
i. Enter the formula into cell G3.
= C3 + D3 + E3 – F3
g) To draw a column graph to show expenditure under each heading.
i. Select the range of cells containing the data that you want to display in a chart. D4:G10
ii. Select the chart type form the Insert Charts Column.
Rs. 0.00
Rs. 1,000.00
Rs. 2,000.00
Rs. 3,000.00
Rs. 4,000.00
Rs. 5,000.00
Rs. 6,000.00
Rs. 7,000.00
Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7
Rent
Bills
Household
Medical
Spreadsheet Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 43 | P a g e
h) Draw Pie chart to show the distribution of salary.
i. Select the range of cells containing the data that you want to display in a chart.
Range 1 is D11:G11 and to select Range 2 hold the Ctrl Key and click on the cell I11
ii. Select the chart type form the Insert Charts Pie.
iii. Select the appropriate chart title and other chart components.
Rent10%
Bills10%
Household7%
Medical3%
Savings70%
DISTRIBUTION OF MONTHLY SALARY
Rent Bills Household Medical Savings
SECTION – C
HTML
HTML Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 44 | P a g e
PROGRAM 1:
Create a web page to display your details using different tags.
<HTML>
<HEAD>
<TITLE> 1ST PUC CS STUDENTS </TITLE>
</HEAD>
<BODY BGCOLOR=ORANGE>
<FONT COLOR=RED>
<H1> <CENTER> FIRST PUC COMPUTER SCIENCE BOOK</CENTER> </H1>
</FONT>
<IMG SRC = "C:\Users\Public\Pictures\Sample Pictures\Lighthouse.jpg" ALIGN=LEFT
WIDTH=200 HEIGHT=300 BORDER=1>
<P> <I> COMPUTER SCIENCE </I> with C++ is a major subject at PUC level with an aim of
creating Computer-qualified graduates later on. This subject focuses on concepts of <B> computer
Fundamentals, Programming Methodology, and Programming in C++, OOP’s, Word Processor, Electronic
Spread Sheet, and Web Programming. </B> </P>
</P> This text book promises to guide you for the preparation of any exam on these topics. This book covers
the manual which are worked on with the samples. </P>
<FONT FACE= CAMBRIA COLOR=YELLOW>
<H2>SAILENT FEATURES</H2>
</FONT>
<OL>
<LI> Computer Fundamentals</LI>
<LI> Programming Methodology</LI>
<LI> Data Representation</LI>
<LI> Programming in C++</LI>
<LI> Word Processor</LI>
<LI> Electronic Spread Sheet</LI>
<LI> Web Programming</LI>
</OL>
</BODY>
</HTML>
HTML Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 45 | P a g e
OUTPUT:
HTML Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 46 | P a g e
PROGRAM 2:
Create a MODEL Web site for your college making using different tags.
Filename: Introduction.htm
<HTML>
<HEAD>
<TITLE> MDRPUC HASSAN </TITLE>
</HEAD>
<BODY BGCOLOR=ORANGE>
<FONT COLOR=RED>
<CENTER>
<H4> GOVERNMENT OF KARNATAKA </H4>
<H1> MORARJI DESAI RESIDENTIAL PU SCIENCE COLLEGE </H1>
<H3> GUDDENAHALLI, BELUR ROAD, HASSAN-573201 </H3>
</CENTER>
</FONT>
<IMG SRC = "C:\Users\Public\Pictures\Sample Pictures\Lighthouse.jpg" ALIGN=LEFT
WIDTH=200 HEIGHT=300 BORDER=1>
<FONT FACE=CAMBRIA SIZE=06 COLOR=CYAN>
<P> MDRPU COLLEGE, Hassan most prestigious institutions in Karnataka. <BR /> Has been a
pioneer in the field of education for many years, Excellency in imparting quality knowledge. </P>
<P> Click on one of the following to get additional information </P>
</FONT>
<A HREF=”D:\COURSE.HTM” TITLE=”COURSES”> COURSES OFFERED </A> <BR> <BR>
<Marquee Direction=”Right”> Admission for the Eligible Students </Marquee>
</BODY>
</HTML>
Filename: Course.htm
<HTML>
<HEAD>
<TITLE> MDRPUC HASSAN- COURSES INFORMATION</TITLE>
</HEAD>
<BODY >
<H1><CENTER> COURSES OFFERED </CENTER></H1>
<P>
<FONT FACE=VERDANA SIZE=4 COLOR=BLUE>
<B> Part-I is Compulsory for all Students </B> <BR>
<B> Language 1- Kannada </B> <BR>
HTML Manual I PUC (PCMC’s)
Morarji Desai Residential Pre-University Science College, Dudda 47 | P a g e
<B> Language 2 – English </B> <BR> <BR>
</FONT>
<FONT FACE=TIMES NEW ROMAN SIZE=4 COLOR=RED>
<B>SCIENCE</B><BR>
<B> PCMB - </B> Physics, Chemistry, Mathematics, Biology <BR>
<B> PCMC - </B> Physics, Chemistry, Mathematics, Computer Science<BR>
<B> PCME - </B> Physics, Chemistry, Mathematics, Electronics <BR>
</FONT>
<Marquee Direction=”Left”> <B> Medium of Instruction - English </B> </Marquee>
</BODY>
</HTML>
OUTPUT