Computer Aided Engineering and Design

Prof. Dr. Demir Bayka

TECHNICAL DRAWING

• Opening a drawing template and editing a sheet format

• Inserting standard views of a part model

• Adding model and reference annotations

• Adding another drawing sheet• Inserting a named view• Printing the drawing

LEARNING OBJECTIVES

CLICK<< OPTIONS >>

CLICK<< FILE LOCATIONS >>

PICK<< DOCUMENT TEMPLATES >>

CLICK<< ADD >>

In the Browse For Folder dialog box, navigate to AE103.

CLICK<< OK >>

CLICK<< YES >>

CLICK<< OK >>

CLICK << NEW >>

CLICK<< DRAWING >>

PICK<<A4 (ANSI) LANDSCAPE>>

CLICK<< SAVE AS >>

PICK<< DRAWING TEMPLATE >>

NAME TEMPLATE AS<< A4 LANDSCAPE >>

BROWSE TO<< AE103 >>

CLICK<< EDIT SHEET FORMAT >>

RIGHT CLICKON DRAWING

AND MENU WILL APPEAR

INFORMATION ABOUT THE DRAWING CAN NOW BE ADDED OR

MODIFIED

LET US TAKE A CLOSER VIEW

LETS GET CLOSER

YOU MAY WRITE YOUR NAME HERE.

PASS OVER THE MIDDLE OF THE BOX

AND CLICK WHEN YOU SEE “A”

SQUARE BRACKETS WILL APPEAR.CLICK IN THE

BRACKETS AND EDIT

WRITE YOUR NAMECLICK

<<OK>>

CLICK AND EXITTHE EDIT MODE

CLICK<< SAVE AS >>

PICK<< A4 LANDSCAPE.DRWDOT >>

PICK<< *.DRWDOT >>

CLICK<< SAVE >>

CLICK<< YES >> AND

REPLACE

EXIT THE DRAWING

CLICK<< NEW >>

CLICK<< ADVANCED >>

CLICK<< DRAWING >>

PICK<< NEW >>PICK

<< A4 LANDSCAPE >>

CLICK<< OK >>

CLICK<< BROWSE >>

TO SELECT THE PART OR ASSEMBLY SOURCE FOR

THE DRAWING

SELECT <<PART_1.SLDPRT>>

DRAG AND POSITION THE FRONT VIEW AS SHOWN

BELOW

CLICKAND DROP

THE FRONT VIEW

PLACE THE OTHER PROJECTED VIEWS

BY MOVING THEMOUSE ON THE

HORIZONTALVERTICALDIAGONAL

DIRECTIONS

CLICK<< OK >>

CLICK AND DRAGTO NEW POITIONS

PICKTHE FRONT VIEW

SELECTHIDDEN LINES

PICKTHE ISOMETRIC VIEW

SELECTSHADED VIEW

SELECTANNOTATIONS

SELECT<<MODEL ITEMS>>

SELECTENTIRE MODEL

CHECK<<IMPORT ITEMS INTO ALL VIEWS>>

CLICK<<OK>>

GET CLOSER

ZOOM INAND REPOSITIONTHE DIMENSIONS

(CLICK WITH SHIFTTO CARRY DIMENSION)

CLICK<<VIEW LAYOUT>>

CLICK<<SECTION VIEW>>

SELECT TOP LINEAND

PICK THE MIDDLE

SELECT BOTTOM LINEAND

PICK THE MIDDLE

CLICK<<YES>>

ZOOM OUTAND REPOSITION

SELECTAND REPOSITION

DELETE UNNECESSARY

DIMENSIONS

CLICK ANDDRAG THE AXIS

RIGHT CLICKAND SELECT

EDIT SHEET FORMAT

SELECT PRINTER

CLICK PRINT