Visit: www.certblaster.com/product/n10-005/

CompTIA Network+ Practice Test Questions

1. Which of the following network access security methods involves the analysis of a physical hardware addresses?A. IP filteringB. L2TPC. MAC filteringD. RAS

2. A company wants to ensure that other mail servers on the Internet can locate its company based email server. What type of record is needed?

A. AAAA

B. MX

C. CNAME

D. PTR

3. What can you use to dynamically assign the same IP address to a printer configured as a network device?

A. DNS

B. DHCP reservation

C. SNMP

D. DHCP exclusion

4. You are tasked with purchasing some cable and you have a choice between plenum and non-plenum cable. When would you select plenum cable?

A. When complying with fire codes

B. When connecting two similar devices

C. When connecting dissimilar media

D. When protecting against EMI

5. You are using Cat 5e cables in your network and recently added a 1 Gbps switch. However, several of the computers are not running at 1 Gbps. Of the following choices, what is the best choice to resolve the problem?

A. Replace the cables with CAT 6

B. Verify the cables with a cable certifier

C. Replace the NICs on the computers

D. Check the cables with a toner probe

6. Of the following choices, what will raise an alarm about a possible attack but not block it?

A. Port scanner

B. IPS

C. IDS

D. Honeypot

7. After adding a new cable segment to the network, the technician should:A. Update the disaster recovery plan.B. Document the changes in the business continuity plan.C. Update the wiring schematics.D. Create a new baseline document.

8. Which of the following devices can be used to breakup a broadcast domain?A. Unmanaged switchB. RouterC. DHCP serverD. Bridge

9. Which of the following is a secure way to transfer files from one device to another?A. SFTPB. SNMPv3C. TFTPD. FTP

10. Which of the following methods is used to provide access to a VPN?A. IGPB. PPTPC. PPPD. RAS

Visit: www.certblaster.com/product/n10-005/

Thank You !!!For More Questions