Compressor Test Bench - climatictesting.comclimatictesting.com/wp-content/uploads/2019/01/CTB... ·...
Transcript of Compressor Test Bench - climatictesting.comclimatictesting.com/wp-content/uploads/2019/01/CTB... ·...
Compressor Test BenchAutomotive A/C Compressor Test Benches and Calorimeters are designed in accordance with ASHRAE Standard 23 and ISO Standard 917 for compressor development and endurance testing. Calorimeter systems are designed to provide heat balances within ±2% with a repeatability of ±1%. The Test Stands are designed for continuous duty over long time periods to allow endurance testing of compressors under extreme conditions. We offer a standard line of automotive compressor test benches and calorimeters up to 17 ton capacities.
Climatic Testing Systems
Climatic Testing Systems, Inc. (CTS) is a single-source supplier of complete line of Compressor Test Benches. Our line of Compressor Test Systems includes Compressor Endurance Test Stands, Compressor Calorimeters, QA Audit Benches and Compressor Clutch Test Benches.
CTS Compressor Test Benches provide as a standard, control of all critical parameters as compressor speed, discharge pressure, liquid temperature or sub-cooling, suction temperature or superheat, and suction pressure. In addition, CTS, offers automatic real-time oil fl ow control that allows the user to precisely and accurately control and report the percentage of oil in circulation.
The Compressor Test bench offers a unitized design which incorporates compressor and drive assembly, compressor fi xture plate, condenser and associated water cooling circuit, Coriolis type fl ow meter (Micro motion Elite) and either a secondary refrigerant evaporator or an evaporator with glycol loading circuit.
These Compressor Test Stands are complemented by Innovative and high-performance Real-Time software. CTS Compressor Test Software is based on open-architecture and data-critical platform. It connects multiple sources of event-driven data in real-time and seamlessly ties complex test algorithms.
Typical Specifi cationParameter Range Stability
Discharge Pressure 90 to 465 psia ± 2 psia[620 to 3200 kPa] [± 14 kPa]
Suction Pressure 15 to 100 psia ± 0.2 psia[100 to 700 kPa] [± 1.4 kPa]
Liquid Refrigerant 60 to 160 °F ± 0.2°FInlet Temperature [15 to 52 °C] [±0.1°C]
Suction Temperature -15 to 100°F ± 0.2°F[-25 to 38°C] [±0.1°C]
Compressor Chamber Temperature Ambient to 250°F ± 3.6°F[Ambient to 120°C] [±2°C]
Compressor Speed 600 to 12,000 RPM ± 0.25%
Oil Flow Rate 0 to 180 Lbs/hr ±0.5%[0 to 90 Kg/hr]
Features> R134a, R744 and other refrigerant
blends> Environmentally controlled
compressor chamber for simulation of “under hood” conditions
> Automatic control and stability monitoring for Suction temperature and pressure, Discharge pressure, liquid sub-cool and compressor speed.
> Oil in circulation control> Capacity, COP and Volumetric
Effi ciency determination as per ASHRAE 23 and ISO 917
> Fully or semi automated systems
(Over for more information)
Climatic Testing Systems370 Constance DriveWarminster, PA 18974Phone (215) 773-9322Fax (215) 773-9323www.climatictesting.comBringing the Desired Climate to Your Doorstep
Software> Real-time test control and data
acquisition software with test report generation
> Test program and test steps editing
> Automatic test sequencing and test advancing
> Real-time stability and test parameter tolerance monitoring and adjustment
> Real-time history graphing and Ph-cycle plotting
> Data fi le management> Real-time Thermodynamic
properties calculations> Software Loop calibration and
calibration reports generation> Hardware checkout routines
Performance Measurements
> ≤ 2% agreement between measured mass-fl ow and calculated mass-fl ow
> ±1% repeatability of test results> Compressor Capacities from
200 BTUH to 200,000 BTUH
Available Options> Manually Controlled Calorimeter> Semi-Automatic Calorimeter
with Digital Recorder> Oil Circulation Control Loop for
real-time oil fl ow rate control
CTS Measurement and Test Control software is based on Nation Instruments LabVIEW® graphical development environment. The software is based on open architecture giving the user the fl exibility to incorporate future expansions in data acquisition, measurement analysis, and data presentation a breeze. The software provides the user with the capability to perform fl exible and scalable test, measurement and control.