Compression Tests on Concrete Cubes - Boyle...
32
Compression Tests on Concrete Cubes Kingsway, Dunmurry, Belfast. BT17 9NU Tel: 028 9055 1363 Fax:028 9061 5762 e-mail: [email protected] Report Issue Date 19-Oct-2015 Page 1 of 1 Cured in laboratory to BS EN 12390-2: 2009 Tested in laboratory to BS EN 12390-3: 2009 Density determined from measured size to BS EN 12390-7: 2009 Loading Rate on all specimens is 0.6 (N/mm2.s) Class 1 compression testing machine used Report to: Site: LGH Medical Academy Report Ref: 28905 Confidential Boyle Construction Trentagh Letterkenny Co Donegal SD: Surface Dry on Receipt D: Surface Damp on Receipt Lab Ref Cube Ref Mix Ref Date Cast Date Received Date Tested Age Dimension H W B Weight (Kg) Rcpt Cond Fail Load (kN) Comp Strength (N/mm2) Fail Mode Remarks Density (Kg/m3) Member of the British Measurement & Testing Association Visit our website: www.mattest.com O4QF02 V.1.0 25/9/2013 Notes Boyle Construction MATTEST 135423 35N 23-03-2015 25-03-2015 30-03-2015 7 150 150 150 8.075 SD 873 38.8 0 floor for tank 2390 2 Notes 1. Cubes made by MATTEST 2. Cube Saturated at test. 3. Cube dry as test/tested as received. 4. Cube showing signs of frost attack. 5. Fins removed using a file. 6. Cube out of square. 7. Cube honeycombed/air voids on face. 8. Fail load below calibrated range. 9. Exposed Aggregate on face(s). 10. Cube damaged (See remarks). 11. Cube unsuitable for test (See remarks). 12. Certificates of sampling, curing and preparation received. 13. Cube made in calibrated mould documentation has been rec'd. 14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted. All testing is carried out in accordance with BS EN 12390 parts 2, 3 & 7 Signed:________________________ G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Transcript of Compression Tests on Concrete Cubes - Boyle...
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 28905
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135423 35N 23-03-2015 25-03-2015 30-03-2015 7 150 150 150 8.075 SD 873 38.8 0 floor for tank2390 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 28961
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135651 35N 25-03-2015 01-04-2015 02-04-2015 8 150 150 150 8.071 SD 980 43.6 0 walls on oil tank2390 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29012
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135982 35N 02-04-2015 16-04-2015 16-04-2015 14 150 150 150 8.062 SD 722 32.1 0 PADS 1-42390 1/2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29035
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135424 35N 23-03-2015 25-03-2015 20-04-2015 28 150 150 150 8.068 SD 924 41.1 0 floor for tank2390 2
135985 35N 10-04-2015 16-04-2015 17-04-2015 7 150 150 150 8.050 SD 867 38.6 0 Pads 4-82390 1/2
135988 35N 10-04-2015 16-04-2015 17-04-2015 7 150 150 150 8.095 SD 851 37.8 0 Pads 8-122400 1/2
135991 35N 13-04-2015 16-04-2015 20-04-2015 7 150 150 150 7.879 SD 812 36.1 0 Pads 13-142330 1/2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29092
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135652 35N 25-03-2015 01-04-2015 22-04-2015 28 150 150 150 7.988 SD 1112 49.4 0 walls on oil tank2340 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29139
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135983 35N 02-04-2015 16-04-2015 30-04-2015 28 150 150 150 8.061 SD 933 41.5 0 PADS 1-42390 1/2
136524GB1 35N 21-04-2015 29-04-2015 30-04-2015 9 150 150 150 8.120 SD 1007 44.8 02410 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29191
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136527GB2 35N 24-04-2015 29-04-2015 01-05-2015 7 150 150 150 8.143 SD 725 32.2 02410 2
136530GB3 35N 24-04-2015 29-04-2015 01-05-2015 7 150 150 150 7.930 SD 949 42.2 02350 2
136533GB4 35N 28-04-2015 29-04-2015 05-05-2015 7 150 150 150 8.324 SD 627 27.9 02470 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29238
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135986 35N 10-04-2015 16-04-2015 08-05-2015 28 150 150 150 8.401 SD 998 44.4 0 Pads 4-82490 1/2
135989 35N 10-04-2015 16-04-2015 08-05-2015 28 150 150 150 8.333 SD 926 41.2 0 Pads 8-122470 1/2
135992 35N 13-04-2015 16-04-2015 11-05-2015 28 150 150 150 8.134 SD 912 40.6 0 Pads 13-142410 1/2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29276
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136894GFC 35N 06-05-2015 13-05-2015 14-05-2015 8 150 150 150 8.264 SD 905 40.2 02450 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29289
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136525GB1 35N 21-04-2015 29-04-2015 19-05-2015 28 150 150 150 8.314 SD 1191 53.0 02460 2
136897GFW 35N 11-05-2015 13-05-2015 18-05-2015 7 150 150 150 8.265 SD 820 36.5 02450 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29360
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136528GB2 35N 24-04-2015 29-04-2015 22-05-2015 28 150 150 150 8.090 SD 965 42.9 02400 2
136531GB3 35N 24-04-2015 29-04-2015 22-05-2015 28 150 150 150 8.227 SD 1115 49.6 02440 2
137098GFW2 35N 14-05-2015 20-05-2015 21-05-2015 7 150 150 150 8.154 SD 1010 44.9 02420 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29407
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136534GB4 35N 28-04-2015 29-04-2015 26-05-2015 28 150 150 150 8.252 SD 1130 50.2 02450 2
137101GFW3 35N 18-05-2015 20-05-2015 25-05-2015 7 150 150 150 8.234 SD 622 27.6 02440 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29452
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136895GFC 35N 06-05-2015 13-05-2015 03-06-2015 28 150 150 150 8.308 SD 1208 53.7 02460 2
137348GFW4 35N 20-05-2015 27-05-2015 28-05-2015 8 150 150 150 8.106 SD 793 35.3 02400 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29507
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136898GFW 35N 11-05-2015 13-05-2015 08-06-2015 28 150 150 150 8.222 SD 1083 48.2 02440 2
137099GFW2 35N 14-05-2015 20-05-2015 11-06-2015 28 150 150 150 8.212 SD 1045 46.5 02430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29554
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137102GFW3 35N 18-05-2015 20-05-2015 15-06-2015 28 150 150 150 8.065 SD 938 41.7 02390 2
137349GFW4 35N 20-05-2015 27-05-2015 17-06-2015 28 150 150 150 8.135 SD 927 41.2 02410 2
137753FFB1 35N 04-06-2015 10-06-2015 11-06-2015 7 150 150 150 8.023 SD 685 30.5 02380 2
137756FFB2 35N 04-06-2015 10-06-2015 11-06-2015 7 150 150 150 8.105 SD 768 34.2 02400 2
137759FFB3 35N 05-06-2015 10-06-2015 12-06-2015 7 150 150 150 8.217 SD 842 37.4 02430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29591
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137926FFB4 35N 11-06-2015 17-06-2015 18-06-2015 7 150 150 150 8.092 SD 624 27.8 02400 2
137928FFW1 35N 12-06-2015 17-06-2015 19-06-2015 7 150 150 150 8.202 SD 755 33.6 02430 2
137930FFW2 35N 12-06-2015 17-06-2015 19-06-2015 7 150 150 150 8.079 SD 954 42.4 02390 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29637
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137933FFW3 35N 16-06-2015 17-06-2015 23-06-2015 7 150 150 150 8.079 SD 954 42.4 02390 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29681
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
138161FFW4 35N 17-06-2015 26-06-2015 26-06-2015 9 150 150 150 8.187 SD 621 27.6 02430 2
138164FFC1 35N 19-06-2015 26-06-2015 26-06-2015 7 150 150 150 8.122 SD 761 33.8 02410 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29729
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137754FFB1 35N 04-06-2015 10-06-2015 02-07-2015 28 150 150 150 8.128 SD 945 42.0 02410 2
137757FFB2 35N 04-06-2015 10-06-2015 02-07-2015 28 150 150 150 8.099 SD 1042 46.3 02400 2
137760FFB3 35N 05-06-2015 10-06-2015 03-07-2015 28 150 150 150 8.244 SD 1081 48.1 02440 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29779
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135984 35N 02-04-2015 16-04-2015 10-07-2015 99 150 150 150 8.120 SD 984 43.7 0 PADS 1-42410 1/2
137100GFW2 35N 14-05-2015 20-05-2015 09-07-2015 56 150 150 150 8.373 SD 1105 49.2 02480 2
137927FFB4 35N 11-06-2015 17-06-2015 09-07-2015 28 150 150 150 8.123 SD 831 36.9 02410 2
137929FFW1 35N 12-06-2015 17-06-2015 10-07-2015 28 150 150 150 8.173 SD 827 36.8 02420 2
137931FFW2 35N 12-06-2015 17-06-2015 10-07-2015 28 150 150 150 8.101 SD 1036 46.0 02400 2
138502SFB1 35N 02-07-2015 08-07-2015 09-07-2015 7 150 150 150 8.150 SD 804 35.8 02410 2
138505SFB2 35N 02-07-2015 08-07-2015 09-07-2015 7 150 150 150 8.111 SD 849 37.8 02400 2
138508SFB3 35N 02-07-2015 08-07-2015 09-07-2015 7 150 150 150 8.139 SD 594 26.4 02410 2
138511SFB4 35N 03-07-2015 08-07-2015 10-07-2015 7 150 150 150 8.269 SD 836 37.2 02450 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29814
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137103GFW3 35N 18-05-2015 20-05-2015 13-07-2015 56 150 150 150 8.123 SD 1067 47.4 02410 2
137350GFW4 35N 20-05-2015 27-05-2015 15-07-2015 56 150 150 150 8.172 SD 1009 44.9 02420 2
137934FFW3 35N 16-06-2015 17-06-2015 14-07-2015 28 150 150 150 8.187 SD 1029 45.8 02430 2
138162FFW4 35N 17-06-2015 26-06-2015 15-07-2015 28 150 150 150 8.173 SD 890 39.6 02420 2
138514SFB5 35N 07-07-2015 08-07-2015 14-07-2015 7 150 150 150 7.973 SD 356 15.8 0 visible voids2360 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29854
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
135987 35N 10-04-2015 16-04-2015 18-07-2015 99 150 150 150 8.411 SD 1037 46.1 0 Pads 4-82490 1/2
135990 35N 10-04-2015 16-04-2015 18-07-2015 99 150 150 150 8.400 SD 983 43.7 0 Pads 8-122490 1/2
135993 35N 13-04-2015 16-04-2015 21-07-2015 99 150 150 150 8.057 SD 956 42.5 0 Pads 13-142390 1/2
138165FFC1 35N 19-06-2015 26-06-2015 17-07-2015 28 150 150 150 8.010 SD 963 42.8 02370 2
138636SFW 1 35 N 09-07-2015 15-07-2015 16-07-2015 7 150 150 150 8.191 D 751 33.4 0 Med Ac.2430 2
138639SFS1 35 N 11-07-2015 15-07-2015 18-07-2015 7 150 150 150 8.107 D 768 34.2 0 MED AC.2400 2
138642SFW2 35 N 13-07-2015 15-07-2015 20-07-2015 7 150 150 150 8.133 D 721 32.1 0 MED AC.2410 2
138645SFW3 35 N 14-07-2015 15-07-2015 21-07-2015 7 150 150 150 8.048 D 651 29.0 0 MED AC.2380 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29892
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
137755FFB1 35N 04-06-2015 10-06-2015 30-07-2015 56 150 150 150 8.267 SD 842 37.4 02450 2
137758FFB2 35N 04-06-2015 10-06-2015 30-07-2015 56 150 150 150 8.025 SD 1009 44.9 02380 2
138503SFB1 35N 02-07-2015 08-07-2015 30-07-2015 28 150 150 150 8.194 SD 609 27.1 02430 2
138506SFB2 35N 02-07-2015 08-07-2015 30-07-2015 28 150 150 150 8.166 SD #Type! 02420 2
138509SFB3 35N 02-07-2015 08-07-2015 30-07-2015 28 150 150 150 8.294 SD 617 27.5 02460 2
138753SFW 4 35N 17-07-2015 22-07-2015 24-07-2015 7 150 150 150 8.179 SD 671 29.8 0 sfw 42420 2
138756SFW 5 35N 20-07-2015 23-07-2015 27-07-2015 7 150 150 100 8.086 SD 723 32.2 0 SFW 53590 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29939
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136526GB1 35N 21-04-2015 29-04-2015 01-07-1939 -3E+04 150 150 150 8.275 SD 1224 54.4 02450 2
136529GB2 35N 24-04-2015 29-04-2015 03-08-2015 101 150 150 150 8.138 SD 1035 46.0 02410 2
136532GB3 35N 24-04-2015 29-04-2015 03-08-2015 101 150 150 150 8.135 SD 1186 52.7 02410 2
136535GB4 35N 28-04-2015 29-04-2015 05-08-2015 99 150 150 150 8.210 SD 1172 52.0 02430 2
137761FFB3 35N 05-06-2015 10-06-2015 31-07-2015 56 150 150 150 8.214 SD 1124 50.0 02430 2
137932 35N 12-06-2015 17-06-2015 07-08-2015 56 150 150 150 8.249 SD 1076 47.8 02440 2
138512SFB4 35N 03-07-2015 08-07-2015 31-07-2015 28 150 150 150 8.409 SD 862 38.3 02490 2
138515SFB5 35N 07-07-2015 08-07-2015 04-08-2015 28 150 150 150 7.989 SD 682 30.3 0 visible voids2370 2
138637 35 N 09-07-2015 15-07-2015 06-08-2015 28 150 150 150 8.126 D 899 40.0 0 Med Ac.2410 2
138640 35 N 11-07-2015 15-07-2015 08-08-2015 28 150 150 150 8.260 D 886 39.4 0 MED AC.2450 2
138643 35 N 13-07-2015 15-07-2015 10-08-2015 28 150 150 150 8.213 D 789 35.0 0 MED AC.2430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 29985
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136896GFC 35N 06-05-2015 13-05-2015 13-08-2015 99 150 150 150 8.212 SD 1243 55.3 02430 2
137935FW3 35N 16-06-2015 17-06-2015 11-08-2015 56 150 150 150 8.211 SD 1071 47.6 02430 2
138163FFW4 35N 17-06-2015 26-06-2015 12-08-2015 56 150 150 150 8.220 SD 1002 44.6 02440 2
138166FFC1 35N 19-06-2015 26-06-2015 14-08-2015 56 150 150 150 8.096 SD 1015 45.1 02400 2
138646 35 N 14-07-2015 15-07-2015 11-08-2015 28 150 150 150 8.079 D 788 35.0 0 MED AC.2390 2
138754 35N 17-07-2015 22-07-2015 14-08-2015 28 150 150 150 8.026 SD 834 37.0 0 sfw 42380 2
138757 35N 20-07-2015 23-07-2015 17-08-2015 28 150 150 100 8.161 SD 920 40.9 0 SFW 53630 2
139240RLB1 35N 31-07-2015 10-08-2015 14-08-2015 14 150 150 150 8.210 SD 754 33.5 02430 2
139243RLB2 35N 31-07-2015 10-08-2015 14-08-2015 14 150 150 150 8.177 SD 627 27.9 02420 2
139246RLB3 35N 04-08-2015 10-08-2015 13-08-2015 9 150 150 150 8.241 SD 625 27.8 02440 2
139249LRB4 35N 06-08-2015 10-08-2015 13-08-2015 7 150 150 150 8.160 SD 727 32.3 02420 2
139252RLS5 35N 07-08-2015 10-08-2015 14-08-2015 7 150 150 150 8.098 SD 724 32.2 02400 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30018
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
136899GFW 35N 11-05-2015 13-05-2015 18-08-2015 99 150 150 150 8.498 SD 1146 50.9 02520 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30059
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
138504SFB1 35N 02-07-2015 08-07-2015 27-08-2015 56 150 150 150 8.127 SD 813 36.1 02410 2
138507SFB2 35N 02-07-2015 08-07-2015 27-08-2015 56 150 150 150 8.251 SD 1027 45.6 02440 2
138510SFB3 35N 02-07-2015 08-07-2015 27-08-2015 56 150 150 150 8.182 SD 788 35.0 02420 2
139395PW 1 35N 11-08-2015 19-08-2015 20-08-2015 9 150 150 150 8.232 SD 825 36.7 02440 2
139398PW 2 35N 13-08-2015 19-08-2015 20-08-2015 7 150 150 150 8.126 SD 508 22.6 02410 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30108
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
138513SFB4 35N 03-07-2015 08-07-2015 28-08-2015 56 150 150 150 8.248 SD 916 40.7 02440 2
138516SFB5 35N 07-07-2015 08-07-2015 01-09-2015 56 150 150 150 8.120 SD 788 35.0 0 visible voids2410 2
138638 35 N 09-07-2015 15-07-2015 03-09-2015 56 150 150 150 8.211 D 965 42.9 0 Med Ac.2430 2
139241RLB1 35N 31-07-2015 10-08-2015 28-08-2015 28 150 150 150 8.184 SD 868 38.6 02430 2
139244RLB2 35N 31-07-2015 10-08-2015 28-08-2015 28 150 150 150 8.166 SD 788 35.0 02420 2
139247RLB3 35N 04-08-2015 10-08-2015 01-09-2015 28 150 150 150 8.216 SD 792 35.2 02430 2
139250RLB4 35N 06-08-2015 10-08-2015 03-09-2015 28 150 150 150 8.197 SD 790 35.1 02430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30161
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
138641 35 N 11-07-2015 15-07-2015 05-09-2015 56 150 150 150 8.156 D 935 41.6 0 MED AC.2450 2
138644 35 N 13-07-2015 15-07-2015 07-09-2015 56 150 150 150 8.168 D 903 40.1 0 MED AC.2420 2
138647 35 N 14-07-2015 15-07-2015 08-09-2015 56 150 150 150 7.998 D 848 37.6 0 MED AC.2370 2
139253RLS5 35N 07-08-2015 10-08-2015 04-09-2015 28 150 150 150 8.174 SD 1122 49.9 02420 2
139396PW 1 35N 11-08-2015 19-08-2015 08-09-2015 28 150 150 150 8.270 SD 866 38.5 02450 2
139399PW 2 35N 13-08-2015 19-08-2015 10-09-2015 28 150 150 150 8.286 SD 1099 48.9 02460 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30219
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
138755 35N 17-07-2015 22-07-2015 11-09-2015 56 150 150 150 8.037 SD 899 40.0 0 sfw 42380 2
138758 35N 20-07-2015 23-07-2015 14-09-2015 56 150 150 100 8.190 SD 964 42.8 0 SFW 53640 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30316
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
139242RLB1 35N 31-07-2015 10-08-2015 25-09-2015 56 150 150 150 8.130 SD 974 43.3 02410 2
139245RLB2 35N 31-07-2015 10-08-2015 25-09-2015 56 150 150 150 8.113 SD 915 40.7 02400 2
139248RLB3 35N 04-08-2015 10-08-2015 29-09-2015 56 150 150 150 8.256 SD 876 39.0 02450 2
139251RLB4 35N 06-08-2015 10-08-2015 01-10-2015 56 150 150 150 8.127 SD 935 41.6 02410 2
139254RLS5 35N 07-08-2015 10-08-2015 02-10-2015 56 150 150 150 8.199 SD 1191 52.9 02430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
Compression Tests on Concrete Cubes
Kingsway,Dunmurry,Belfast.BT17 9NUTel: 028 9055 1363Fax:028 9061 5762e-mail: [email protected]
Report Issue Date 19-Oct-2015
Page 1 of 1
Cured in laboratory to BS EN 12390-2: 2009Tested in laboratory to BS EN 12390-3: 2009Density determined from measured size to BS EN 12390-7: 2009Loading Rate on all specimens is 0.6 (N/mm2.s)Class 1 compression testing machine used
Report to:
Site: LGH Medical Academy
Report Ref: 30382
Confidential
Boyle Construction
TrentaghLetterkennyCo Donegal
SD: Surface Dry on ReceiptD: Surface Damp on Receipt
Lab
Ref
Cube
Ref
Mix
Ref
Date
Cast
Date
Received
Date
Tested AgeDimension
H W B
Weight
(Kg)
Rcpt
Cond
Fail
Load
(kN)
Comp
Strength
(N/mm2)Fail
Mode RemarksDensity
(Kg/m3)
Member of the British Measurement & Testing Association
Visit our website: www.mattest.com
O4QF02 V.1.025/9/2013
Notes
Boyle Construction
MATTEST
139397PW 1 35N 11-08-2015 19-08-2015 06-10-2015 56 150 150 150 8.336 SD 950 42.2 02470 2
139400PW 2 35N 13-08-2015 19-08-2015 08-10-2015 56 150 150 150 8.212 SD 1130 50.2 02430 2
Notes 1. Cubes made by MATTEST2. Cube Saturated at test.3. Cube dry as test/tested as received.4. Cube showing signs of frost attack.5. Fins removed using a file.
6. Cube out of square.7. Cube honeycombed/air voids on face.8. Fail load below calibrated range.9. Exposed Aggregate on face(s).10. Cube damaged (See remarks).
11. Cube unsuitable for test (See remarks).12. Certificates of sampling, curing and preparation received.13. Cube made in calibrated mould documentation has been rec'd.14. Tested in accordance with BS EN 12390-3 Annex B dimensions not adjusted.
All testing is carried out in accordance withBS EN 12390 parts 2, 3 & 7
Signed:________________________
G Ellis (Dir), N Cooke (AM), D Adair (TM), A Kennedy (EO)
