Compression molding
-
Upload
neslihan-yagmur -
Category
Education
-
view
2.422 -
download
5
Transcript of Compression molding
![Page 1: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/1.jpg)
1
Compression Molding
Neslihan Yağmur11/12/2012
![Page 2: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/2.jpg)
2
Compression Molding Process
The process of molding a material in a confined shape by applying pressure and usually heat.Compression molding process is followed by two step first one preheating and pressurizing.
![Page 3: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/3.jpg)
3
Process Description
![Page 4: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/4.jpg)
4
Process Description
Charge is placed in cavity of matched mold in the open position,Mold is closed by bring the two halves together,Pressure is exerted to squeeze the resin so that it fills the mold cavity,While under pressure the mold is heated which cures the resin.
![Page 5: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/5.jpg)
5
Process Description
![Page 6: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/6.jpg)
6
Stages in Compression molding cycle
![Page 7: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/7.jpg)
7
Stages in Compression molding cycle
The various stages of the compression molding cycle time can be represented as a function of the force required to close the old at a constant rate. In the “plastication” stage the force increases rapidly as the polymer feed is compressed and heated.
![Page 8: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/8.jpg)
8
Stages in Compression molding cycle
The second stage flow commences, once the yield stress of the elastomer is exceeded. tc is the point at which the mold fills and compression of the melt occurs. Mold filling the majority of chemical reaction should take place after tc.
![Page 9: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/9.jpg)
9
Parameters1.The quantity of molding material
2.Pressure of the molding process
Range of pressure 2000-3000 psi(13.8-20.7 MPa)
3.Mold temperature
Temperature range 300ºF to 375ºF (149⁰C- 191⁰C)
4.Cure time variables.
The period required to harden thermosetting material to partial and complete polymerization is called cure time
![Page 10: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/10.jpg)
10
Types of compression molding • Sheet molding compound(SMC)
Sheet molding process involves placing a reinforcement, such as a glass mat, between sandwiching layers of a thermoplastic and heating the materials to produce a single sheet of material.
• Bulk molding compound(BMC)
Bulk molding compounds by producing a billet of molten material that is placed into a compression molding press which molds the molten material into a part.
![Page 11: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/11.jpg)
11
Materials used in this process
• Thermosetting polymers • Fiber reinforced composite• Thermoplastic:
-Ultra High Molecular Weight Polyethylene (UHMWPE)
- Long Fiber reinforced Thermoplastics
![Page 12: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/12.jpg)
12
Material properties affected by the process
Density
Strength
Anisotropic property (fiber orientation)
![Page 13: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/13.jpg)
13
Advantages
Low cost
Uniform density
Uniform shrinkage due to uniform flow
Improved impact strength
Dimensional accuracy
Internal stress and warping are minimized
Short cycle time
High volume production
![Page 14: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/14.jpg)
14
Disadvantages
• Curing time large• Uneven parting lines present • Scrap cannot be reprocessed• High initial capital investment
![Page 15: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/15.jpg)
15
Applications & products
• Dinnerware• Buttons• Knobs• Appliance Housings
![Page 16: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/16.jpg)
16
Applications & products
• Radio Cases• Automotive• ash trays & electrical parts
![Page 17: Compression molding](https://reader035.fdocuments.in/reader035/viewer/2022081504/555015dcb4c90555618b4d5e/html5/thumbnails/17.jpg)
17
ReferencesPolymer Processing Fundamentals, A. Tim, Carl Hanser Verlag, Munich, 1998Effect of Molding Parameter on Compression Molded Sheet Molding Compounds Part, Jin-Ho Jeong, Journal of Materials Processing , 1997