Comprehensive Product Data Guide - WordPress.com · synthesis High bonding energy Siloxane bonds...

Comprehensive Product Data Guide(For North and South America)

Methylsilane

Vinylsilane

Phenylsilane

Methyl chlorideCH3Cl

ChlorobenzeneC6H5Cl

Silicon metalSi

HydrolysisMonomersynthesis

High bonding energySiloxane bonds (-Si-O-Si-) form the basic backbone of silicone. Siloxane bonds have high bonding energy, and this backbone is the same structure which makes up inorganic materials including glass and quartz. Silicones are thus chemically stable and exhibit outstanding heat and weather resistance.

Helical molecular structureThe molecular structure is helical and highly flexible. This quality is what gives silicone its high compressibility and cold-resistant properties. There is little temperature dependence of the physical properties of silicones.

Low intermolecular forceDue to the helical molecular structure and the presence of organic groups (CH3), the intermolecular distance is large and the molecules tend not to agglutinate. This results in the low surface tension of silicones and their properties of water repellency and mold-releasability.

Combining the features of both organics and inorganics

Creating materials with more sophisticated featuresThere is another major feature of silicones: blending technologies can be used to impart additional features, creating all-new materials that have the qualities of other materials combined with those of silicones.

Over 4,000 products, with exploration into new fieldsSince bringing our first silicone products to market in 1953, Shin-Etsu Chemical has worked for half a century developing new applications and products to meet wide-ranging needs. With products in fluid, resin, and rubber forms, Shin-Etsu boasts a total of over 4,000 products. Our products are put to use in a wide range of fields, including the electronics and machinery, and the chemical, textile, construction, and food industries. Silicones are materials with diverse properties and great potential, and Shin-Etsu Chemical’s efforts are ceaseless in the exploration of new directions and applications.

Ever-expanding possibilities

Si

O

Organic groups mainly composed of CH3

Silanes 4

Silane coupling agents 6

Silicone fluids 8

Modified silicone fluids 10

Greases and fluid compounds 12

Textile treatments 14

Release agents 16

Paper release agents 18

Defoaming agents 20

22

Silicone resins 24

Paint additives 26

One-component RTV rubbers 28

30

32

Sealants, construction coating agents 34

Rubber compounds 36

42

44

Fluids

Resin

Liquid rubbers

Rubbers

Silane

Comprehensive Product Guide Contents

Siloxanerefinement

Special groupintroduction

Polymerization

Polymerization

Heat-shrinkable silicone rubber tubing, Heat-dissipating rubber products, Electrically-conductive rubber products

Foam stabilizers, Pressure sensitive adhesives

Two-component RTV rubbers(for electric and electronic applications)

Two-component RTV rubbers(for moldmaking)

LIMS(Liquid silicone rubber Injection Molding System)

4

SilanesSilanes are a group of silicon compounds consisting of chlorosilane, alkoxysilane, and silazane. Silanes are used in a wide variety of fields, making use of the unique properties of silicon compounds.

● Protection of the functional groupsProtection of the functional groups during synthesis of pharmaceuticals and agricultural chemicals.

● Resin modificationUsed in resin modification and paint modification, and in surface modification of inorganic materials.

Handling precautions

■ Quality, storage, and health and safety

• Many of the silanes contained in this catalog may be classified as hazardous materials under the fire safety laws of various countries. Please use caution in the use of flame during usage and storage of silanes. Be sure to read the Material Safety Data Sheet (MSDS) before handling. MSDS and Hazardous Materials Database registration certificates can be obtained from our Sales Department.

• Chlorosilanes are extremely reactive compounds and contact with moisture wil l cause generation of hydrochloric acid gas. Always wear protective gear such as rubber gloves and goggles to prevent contact with the skin and eyes. In case of contact with skin or mucous membranes, wash thoroughly with water and consult a physician immediately. Take care to ensure adequate ventilation to prevent breathing of vapors.

• Always wear protective gear such as rubber gloves and goggles when handling alkoxysilane to prevent contact with the skin and eyes. In case of contact with skin or mucous membranes, wash thoroughly with water and consult a physician if adverse symptoms occur. Take care to ensure adequate ventilation to prevent breathing of vapors.

• When handling large quantities of chlorosilane, please refer to the following manual regarding proper response to accidents such as leakage or fire.

ASTM Manual Series: MNL33“Manual on Chlorosilane Emergency Response Guidelines”Editors: John T. Higgins, Wilmuth E. Hubbs, Robert A. Kayser, Paul Kremer, Stephen W. MacMahan, Lee Patric and Michael Strong (1998)

Chemical name Grade Reagent name

Methyltrichlorosilane KA-13 LS-40

Dimethyldichlorosilane KA-22 LS-130

Trimethylchlorosilane KA-31 LS-260

Phenyltrichlorosilane KA-103 LS-920

Methyltrimethoxysilane KBM-13 LS-530

Dimethyldimethoxysilane KBM-22 LS-520

Phenyltrimethoxysilane KBM-103 LS-2750

Tetraethoxysilane KBE-04 LS-2430

Methyltriethoxysilane KBE-13 LS-1890

Dimethyldiethoxysilane KBE-22 LS-1370

Phenyltriethoxysilane KBE-103 LS-4480

N-propyltrimethoxysilane KBM-3033 LS-1382

N-propyltriethoxysilane KBE-3033 LS-3120

Hexyltrimethoxysilane KBM-3063 LS-3130

Hexyltriethoxysilane KBE-3063 LS-4808

Decyltrimethoxysilane (high purity) KBM-3103 LS-5258

Trifluoropropyltrimethoxysilane KBM-7103 LS-1090

Hexamethyldisilazane SZ-31 LS-7150

✽1:Closed cup ✽2:Open cup

5

Structural formula

Molecular weight Specific gravity

Refractive index Boiling point

Flash point

ENCS No.

CAS No. 25°C n 25

D °C °C

CH3SiCl3 149.5 1.27 1.4088 66 -8✽1 2-2041 75-79-6

(CH3)2SiCl2 129.1 1.07 1.4022 70 -7✽1 2-2041 75-78-5

(CH3)3SiCl 108.6 0.85 1.3868 57 -15✽1 2-2041 75-77-4

C6H5SiCl3 211.6 1.32 1.5222 202 91✽2 3-2634 98-13-5

CH3Si(OCH3)3 136.2 0.95 1.3687 102 8✽1 2-2052 1185-55-3

(CH3)2Si(OCH3)2 120.2 0.86 1.3706 82 -10✽1 2-2052 1112-39-6

C6H5Si(OCH3)3 198.3 1.06 1.4732 218 94✽2 3-2635 2996-92-1

Si(OC2H5)4 208.3 0.93 1.3811 168 54✽1 2-2048 78-10-4

CH3Si(OC2H5)3 178.3 0.89 1.3830 143 40✽1 2-2052 2031-67-6

(CH3)2Si(OC2H5)2 148.3 0.83 1.3839 114 15✽1 2-2052 78-62-6

C6H5Si(OC2H5)3 240.4 0.99 1.4588 236 111✽2 3-2635 780-69-8

CH3(CH2)2Si(OCH3)3 164.3 0.93 1.3880 142 36✽1 2-2052 1067-25-0

CH3(CH2)2Si(OC2H5)3 206.4 0.89 1.3940 179 57✽1 2-2052 2550-02-9

CH3(CH2)5Si(OCH3)3 206.4 0.91 1.4060 202 81✽1 2-2052 3069-19-0

CH3(CH2)5Si(OC2H5)3 248.4 0.88 1.4078 120.6°C/2.8kPa 95✽2 2-2052 18166-37-5

CH3(CH2)9Si(OCH3)3 262.5 0.90 1.4209 132°C/1.3kPa 135✽2 2-3512 5575-48-4

CF3CH2CH2Si(OCH3)3 218.2 1.14 1.3520 144 23✽1 2-2079 429-60-7

(CH3)3SiNHSi(CH3)3 161.4 0.77 1.4080 126 14✽1 2-2955 999-97-3

(Not specified values)

6

Silane coupling agentsSilane coupling agents contain at least two different reactive groups within their molecules. One of these functional groups forms chemical bonds with inorganic materials, and the other forms chemical bonds with organic materials. This property enables silane coupling agents to function as intermediaries in bonding organic materials to inorganic materials, which normally tend not to bond with each other.

● Higher-quality composite materialsSilane coupling agents improve dispersion during mixing of resins and fillers, and improve the mechanical strength, water and heat resistance, transparency, adhesion and other properties of the composite materials. Silane coupling agents are also highly effective in improving the chemical bonding of heat-cure resins and their compatibility with polymers.

● Resin modification/Surface treatmentReacting a resin with a silane coupling agent can improve its anchorage to inorganic materials, its room-temperature humidity curing properties, and improve its weatherability and resistance to heat, acids and solvents. Silane coupling agents can also be used to treat the surface of inorganic materials to improve the materials’ surface characteristics.

Handling precautions

■ Quality, storage, and handling

• Silane coupling agents hydrolyze if they come into contact with water or moisture, causing a change in properties and generation of substances such as ethanol and methanol. Therefore, use caution not to leave open and always seal tightly after use to prevent the incursion of water or moisture. Replacing the air in the storage container with dry nitrogen is ideal.

• Please read the Material Safety Data Sheet (MSDS) before use. MSDS can be obtained from our Sales Department.

Functional

Chemical name Grade group

Vinyl Vinyltrimethoxysilane KBM-1003

Vinyltriethoxysilane KBE-1003

2-(3,4-epoxycyclohexyl) ethyltrimethoxysilane KBM-303

Epoxy 3-glycidoxypropyltrimethoxysilane KBM-403

3-glycidoxypropylmethyldiethoxysilane KBE-402

3-glycidoxypropyltriethoxysilane KBE-403

Styryl p-Styryltrimethoxysilane KBM-1403

3-methacryloxypropylmethyldimethoxysilane KBM-502

3-methacryloxypropyltrimethoxysilane KBM-503

Methacryloxy

3-methacryloxypropylmethyldiethoxysilane KBE-502

3-methacryloxypropyltriethoxysilane KBE-503

Acryloxy 3-acryloxypropyltrimethoxysilane KBM-5103

N-2-(aminoethyl)-3-aminopropylmethyldimethoxysilane KBM-602

N-2-(aminoethyl)-3-aminopropyltrimethoxysilane KBM-603

3-aminopropyltrimethoxysilane KBM-903 Amino

3-aminopropyltriethoxysilane KBE-903

N-phenyl-3-aminopropyltrimethoxysilane KBM-573

N-(vinylbenzyl)-2-aminoethyl-3-aminopropyltrimethoxysilane hydrochloride KBM-575

Ureid 3-ureidopropyltriethoxysilane KBE-585

3-mercaptopropylmethyldimethoxysilane KBM-802 Mercapto

3-mercaptopropyltrimethoxysilane KBM-803

Polysulfide Bis(triethoxysilylpropyl)tetrasulfide KBE-846

Isocyanate 3-isocyanatepropyltriethoxysilane KBE-9007

✽ 1kPa:7.5mmHg ✽1:Closed cup ✽2:Open cup

7

Structural formula Molecular Specific Refractive Boiling point Flash point

ENCS No. CAS No. Applicable resins weight gravity 25°C index 25°C °C °C

(CH3O)3SiCH=CH2 148.2 0.97 1.391 123 23✽1 2-2066 2768-02-7

(C2H5O)3SiCH=CH2 190.3 0.90 1.397 161 54✽1 2-2066 78-08-0

246.4 1.06 1.448 310 163✽1 3-2647 3388-04-3 Epoxy, etc.

236.3 1.07 1.427 290 149✽1 2-2071 2530-83-8

248.4 0.98 1.431 259 128✽1 2-2072 2897-60-1

278.4 1.00 1.425 124°C/0.39kPa 144✽1 2-2071 2602-34-8

224.3 1.06 1.504 115°C/0.001kPa 136✽1 3-4371 18001-13-3 Polystyrene, acrylic, etc.

232.4 1.00 1.433 83°C/0.39kPa 115✽1 2-2075 14513-34-9

248.4 1.04 1.429 255 125✽1 2-2076 2530-85-0

260.4 0.96 1.432 265 136✽1 2-2075 65100-04-1

290.4 0.99 1.427 129°C/0.67kPa 128✽1 2-2076 21142-29-0

234.3 1.06 1.427 102°C/0.53kPa 115✽1 2-3727 4369-14-6

206.4 0.97 1.447 234 110✽1 2-2084 3069-29-2

(CH3O)3SiC3H6NHC2H4NH2 222.4 1.02 1.442 259 128✽1 2-2083 1760-24-3

(CH3O)3SiC3H6NH2 179.3 1.01 1.422 215 88✽1 2-2061 13822-56-5

(C2H5O)3SiC3H6NH2 221.4 0.94 1.420 217 98✽1 2-2061 919-30-2

255.4 1.07 1.504 312 165✽1 3-2644 3068-76-6

Methanol solution, active ingredients: 40% — 0.91 — — 11✽1 3-3378 34937-00-3

— 0.91 — — 11✽1 2-2968 23779-32-0 Nylon, urethan, etc.

180.3 1.00 1.448 204 72✽1 2-3498 31001-77-1

(CH3O)3SiC3H6SH 196.4 1.06 1.440 219 107✽1 2-2045 4420-74-0 Urethane, epoxy, rubber, etc.

(C2H5O)3SiC3H6S4C3H6Si(OC2H5)3 — 1.08 1.486 — 212✽1 2-3124 40372-72-3 Rubber, etc.

(C2H5O)3SiC3H6N=C=O 247.4 1.00 1.418 250 118✽1 2-3880 24801-88-5 Urethane, fluorine, acrylic, etc.


(CH3O)3SiC2H4O

(C2H5O)3SiC3H6OCH2CH CH2

O

(C2H5O)2SiC3H6OCH2CH CH2

CH3 O

(CH3O)3SiC3H6OCH2CH CH2

O

(CH3O)3Si CH=CH2

O

=(CH3O)3SiC3H6OCC=CH2

CH3

O

=(CH3O)2SiC3H6OCC=CH2

CH3CH3

(C2H5O)2SiC3H6OCC=CH2

O

=

CH3 CH3

(C2H5O)3SiC3H6OCC=CH2

O

=

CH3

(CH3O)3SiC3H6OCCH=CH2

O

=

(CH3O)2SiC3H6NHC2H4NH2

CH3

(CH3O)3SiC3H6NH

(CH3O)2SiC3H6SHCH3

Phenol, urethane, epoxy, polyimide, nylon, etc.

Polyethylene,polypropylene, etc.

Acrylic, urethane,epoxy, phenol, etc.

Unsaturated polyester, acrylic, EVA, etc.

Methanol solution, active ingredients: 50%

(C2H5O)3SiC3H6NHCNH2

O

=

8

Silicone fluidsSilicone fluids are generally colorless transparent liquids. They exhibit excellent resistance to heat, cold, and moisture. There is also little viscosity change in silicone fluids over a wide temperature range, and they have outstanding electrical properties. In addition, they are notable for their characteristics of mold-releasability, water repellency, lubricity, and defoaming properties.

● Heat resistanceSilicone fluids have outstanding stability against thermal oxidation.

● Cold resistanceSilicone fluids withstand low temperatures well. Methylphenyl silicone fluid, formulated for low temperature applications, maintains flowability even at -65°C.

● Viscosity stabilityThere is l i t t le change in viscosity over a wide temperature range.

● Chemical stabilitySilicone fluids are almost totally chemically inactive. At room temperature, they show almost no effects from alkali solutions (up to 10%) or acidic solutions (up to 30%).

● Non-corrosive and little effect on other materialsSilicone fluids have almost no adverse effects on metals and many other materials.

● Low surface tensionSilicone fluids have much lower surface tension than water and other common synthetic oils.

Applications Grade Appearance

Colorless transparent liquid

General purpose

DM-FLUID A Colorless transparent liquid



Paint additive F-6W-9 Colorless transparent liquid

Water repellency treatment F-9W-9 Colorless transparent liquid

Low-temperature applications F-5W-0 Colorless transparent liquid

KF-54 Colorless transparent liquid

High-temperature applications KF-965 Brown liquid

KF-968 Pale yellow transparent liquid

For oil diffusion pumps

HIVAC-F-4 Colorless transparent liquid

HIVAC-F-5 Colorless transparent liquid

Additives for cosmetics

KF-56A Colorless transparent liquid


DM-FLUID(Low viscosity)

DM-FLUID(Medium viscosity)

DM-FLUID(High viscosity)

9

Viscosity Specific gravity Volatile matter content Refractive index Features

25°C mm2/s 25°C 150°C/24h % n 25 D

✽ 105°C/3h (Not specified values)

●Dimethyl silicone fluidThe most typical product of all silicone fluids.40 max., 4.0 max.,

1.5 max. or 0.5 max.

●Dimethyl silicone fluidImproves gloss while preventing orange peel and silking in paints.

●Methylhydrogen silicone fluidHighly water repellent. Suitable for processing of glass, metal, fibers, and powders.

●Methylphenyl silicone fluidFor low-temperature applications(-60°C to +200°C).

●Methylphenyl silicone fluidFor high-temperature applications (-30°C to +250°C).Suitable as a heating medium in open systems.

●Dimethyl silicone fluidFor high-temperature applications (-50°C to +250°C).Suitable as a heating medium in closed systems.

●Dimethyl silicone fluidFor high-temperature applications (-50°C to +250°C).Suitable as a heating medium in open systems.

●Methylphenyl silicone fluidSuperior chemical resistance and resistance to oxidation.For high-level vacuums of 10-7 to 10-12 Torr.HIVAC F-5 can reach higher degrees of vacuum.

●Methylphenyl silicone fluidAlcohol-soluble.

●Cyclic dimethyl silicone fluidVolatile. No residue after volatilization, so cosmetics have a dry feel.

0.65-5 0.760-0.915 1.375-1.396

6 0.925 5.0 max.✽ 1.397

10-5000 0.935-0.975 1.399-1.403

6000-1000000 0.975-0.978 0.5 max. or 15 max. 1.403

20 0.950 25 1.400

20 1.000 5 max.✽ 1.396

100-3000 0.997-1.000 0.5 max. 1.425

400 1.070 0.5 max. 1.505

100-10000 0.965-0.975 0.5 max. 1.403

100 0.965 0.5 max. 1.403

37 1.065 Boiling point 210°C/0.67kPa 1.555

160 1.097 Boiling point 240°C/0.80kPa 1.575

15 0.995 15✽ 1.500

4 0.956 Boiling point 210°C 1.396

0.65cs-2cs:Boiling point 100-230°C

5cs:40 max.✽

10

Modified silicone fluidsModified silicone fluids are silicone fluids with additional functionality beyond the already fine properties of common dimethyl silicone fluid. This is achieved through the introduction of various organic groups. Depending on the organic group, silicone fluids can be given properties of water-solubility, compatibility or reactivity with various organic materials, paintability, and greater lubricity.

● Features of dimethyl silicone fluid· Water repellency · Thermal oxidation stability · Chemical stability · Defoaming properties

● Features gained through introduction oforganic groups· Paintability · Solubility and dispersibility in water · Compatibility or reactivity with organic materials · Antistatic properties · Flexibility · Lubricity

Paint additive, plastic additive, mold-release agent KF-410

Paint additive, water repellent for construction applications, mold-release agent KF-412

KF-351A

KF-352A

KF-353

KF-354L

KF-355A

KF-615A

KF-945

KF-6004

Lubricant, defoaming agent FL-100

KF-859

KF-861

KF-864

KF-880

KF-8010

X-22-161A

X-22-161B

KF-8012

Paint additive, resin modification, rustproofing agent KF-2001

KF-1001

Textile oleum, resin modification, wax, paint additive KF-101

KF-102

Textile oleum, resin modification, gloss enhancer, dispersant X-22-3701E

X-22-3710

Resin modification, paint additive KF-910

Wax, gloss enhancer KF-3935

X-22-160AS

Resin modification, paint additive KF-6001

KF-6002

KF-6003

Applications

Grade

Emulsifier, foam stabilizer, plastic additive, anticlouding agent, defoaming agent, textile oleum, water-soluble lubricant

Textile oleum, resin modification, paint additive, gloss enhancer, wax

11

900 1.02 1.480 Aralkyl-modified. Good compatibility with organic resins.

500 0.90 1.450 Alkyl-modified. Good compatibility with organic resins.

70 1.06 1.450 Polyether-modified. Cloud point 65°C, Low surface tension, H.L.B. 12.

1600 1.03 1.446 Polyether-modified. Cloud point 35°C, good lubricity, H.L.B. 7.

430 1.04 1.438 Polyether-modified. Self-emulsifying, H.L.B. 10.

200 1.10 1.463 Polyether-modified. Cloud point 87°C, low-foaming, H.L.B. 16.

150 1.07 1.453 Polyether-modified. Good water-solubility, H.L.B. 12.

900 1.05 1.451 Polyether-modified. Cloud point 65°C, H.L.B. 10.

130 1.00 1.420 Water insoluble. Defoaming, H.L.B. 4.

Pale yellow solid — — Melting point 45°C, H.L.B. 5.

100, 450, 1000, 10000 1.23-1.30 1.379-1.382 Fluoro-modified. Lubricity, chemical resistance, solvent resistance, oil resistance.

60 0.96 1.403

3500 0.98 1.408

1700 0.98 1.406

650 0.98 1.407

12 1.00 1.418

25 0.97 1.407

55 0.97 1.408

90 0.97 1.407

200 0.98 1.410 Mercapto-modified. Reactivity, adsorbability.

17000 0.98 1.407

1500 1.01 1.437 Epoxy-modified. Reactivity, adsorbability, mold-releasability, flexibility.

3500 0.97 1.408

2000 0.98 1.409 Carboxyl-modified. Reactivity, lubricity, mold-releasability, flexibility.

60 0.97 1.412

Melting point 45°C 0.90✽ — Higher fatty acid ester-modified. Good compatibility with organic resins.

— — Contains higher fatty acids.

35 0.98 1.422

45 0.98 1.413

70 0.98 1.409 Carbinol-modified. Reactivity, mold-releasability, oxygen permeability.

110 0.98 1.407

Viscosity Specific gravity Refractive index Features

25°C mm2/s 25°C n 25 D

✽ 60°C (Not specified values)

Amino-modified. Water repellency, reactivity, adsorbability, lubricity, mold-releasability, flexibility.

Paste consistency(Melting point 49°C)

12

Silicone greases start with a base oil of silicone fluid, to which are added various additives and fillers (metal soap, etc.). Silicone greases exhibit thermal oxidation stability over a wide tempera-ture range, offer good moisture-resistance, and are used primarily for lubrication.Silicone fluid compounds are products with a grease-like consistency. They are produced by blending materials such as silica powder into a base oil of silicone fluid. They exhibit thermal oxidation stability over a wide temperature range and have outstanding electrical properties and water repellency. Silicone fluid compounds are used primarily in electrical insulators and seals, and for heat dissipation and water repellency.

● Heat and cold resistanceBecause the silicone fluid base oil has good resistance to heat and cold, the drop point is high, there is little oil separation, and volatile matter content is low.

● Moisture resistanceThese products have good resistance to water and moisture. Silicone greases can be left underwater for long periods; the surface will turn white, but there is almost no internal change.

● SafetyThe silicone fluid base oil is chemically inactive, so these products pose almost no risk to humans and animals.

● EfficiencyExcellent performance even when used in small amounts.

Greases and fluid compounds

Low-temperature lubrication G-3W-0 Series Grayish white

G-40 Series Beige / Dark brown High-temperature lubrication

G-420 White

Plastic lubrication G-501 White to pale yellow

Solvent-resistant lubricantion FG-720 Series White

G-302 White High-load lubrication

G-503 Yellow

Non-mineral oil lubrication for rubbers G-411 Brown

G-330 Series White / blue

G-340 Series Pale yellow

G-630 Series

KS-62F Tinted white

KS-62M White translucent

Electrical insulation, seals KS-63W White

KS-64F White

KS-64 White

Insulator protection in salty air,electrical insulation KS-63G Green

KS-609 White

KS-613 White

G-747 White

G-775 White

G-776 White

Heat dissipation G-777 White

G-765 Gray

G-750 Gray

G-751 Gray

X-23-7762 Gray

X-23-7783D Gray

Electrical conduction KS-660 Black

KS-660B Black

High vacuum seals HIVAC-G White

Rustproof seals KS-622 Creamy white

KS-65A White Valve seals

KS-623 White

Silicone rubbers KS-650N Creamy white translucent

KS-651 Pale yellow-yellow

Optical applications Optseal Highly transparent

Optseal-L Highly transparent


CategoryGreases

Fluid compounds

Colorless-pale yellow transparent /pale yellow-creamy white translucent

Adhesive applications(torque, damper)

13

200-320 0.5-5.7 0.35-0.41 -60°C to +180°C Suitable for lubrication in extremely low temperature applications, in which petroleum greases cannot be used.

200-320 3.0-8.9 0.3-0.4 -30°C to +200°C Suitable for lubrication of sealed bearings. Performance complies with MIL-L-15719A.

281 5.7✽3 0.3✽3 -30°C to +250°C Good lubrication particularly at high temperatures.

306 2.5✽2 0.1✽2 -50°C to +150°C Does not cause stress cracking in plastic. Good lubrication for steel on steel.

281-303 0.2-3.9✽3 0.3-0.5✽3 -30°C to +200°C Especially good boundary lubrication and solvent resistance.

1.13 1.2✽2 0.3✽1 -60°C to +180°C Excellent lubricating properties in high load conditions.

0.97 2.2✽2 0.5✽2 -50°C to +150°C Excellent lubricating properties in high load conditions.

303 5.1 1.4 -30°C to +200°C For rubber cups of automotive brakes.

250-307✽1 0.01-0.38✽4 0.05-0.06✽4 -30°C to +150°C General purpose.

158-182✽1 0.02-0.06✽4 0.06-0.08✽4 -40°C to +100°C For low temperature applications. Little change in torque values in temperatures ranging from -30°C to +60°C.

213-235✽1 0.02-0.78✽4 0.06-0.07✽4 -0°C to +80°C For bearings. Good feel. Base oil is non-silicone.

— — < 1.0✽3 -30°C to +250°C Heat-resistant. Paste consistency.

229 1.3✽3 0.3✽3 -30°C to +250°C Heat-resistant.

225 2.9✽2 0.1✽2 -50°C to +200°C General purpose.

385 18✽2 0.1✽2 -50°C to +200°C Paste.

246 5.8✽3 0.1✽3 -50°C to +200°C Performance meets MIL-S-8660B specifications.

209 0.8✽2 0.1✽2 -50°C to +200°C Complies with JRS standards.

328 0.3✽3 0.3✽3 -55°C to +200°C Thermal conductivity: 0.73W/m·K. General purpose.

346 2.3✽3 0.3✽3 -50°C to +250°C Thermal conductivity: 0.76W/m·K.

328 0.01✽5 0.06✽5 -50°C to +150°C Thermal conductivity: 0.90W/m·K.

250✽6 — 0.26✽2 -40°C to +150°C Thermal conductivity: 3.6 W/m·K. Highly resistant to "pump-out".

354✽6 — 3.10✽2 -40°C to +200°C Thermal conductivity: 1.3 W/m·K (after evaporation of solvent). Low viscosity, and yet low oil bleed.

190✽6 — 0.10✽2 -40°C to +200°C Thermal conductivity: 3.1 W/m·K. All-purpose type.

250✽6 0.01✽2 0.06✽2 -50°C to +120°C Thermal conductivity: 2.9W/m·K. Main application: IGBT.

300✽6 0.01✽2 0.28✽2 -50°C to +120°C Thermal conductivity: 3.5W/m·K. Main application: IGBT.

420✽6 0.01✽2 0.10✽2 -50°C to +120°C Thermal conductivity: 4.5W/m·K. Main application: CPU.

180✽6 — 2.58✽2 -50°C to +120°C Thermal conductivity: 6.0W/m·K (After evaporation of solvent). Main application: CPU.

200✽6 — 2.43✽2 -50°C to +120°C Thermal conductivity: 5.5W/m·K (After evaporation of solvent). Main application: CPU.

247 8.0✽3 0.2✽3 -50°C to +200°C Volume resistivity: 0.49Ω·m.

301 3.9✽2 0.1✽2 -50°C to +150°C High lubricity version of KS-660.

209 0.1✽3 0.1✽3 -50°C to +200°C Good thermo-oxidative stability and chemical stability. Can be used for high vacuums of 10-6 Torr.

268 2.74✽2 0.44✽2 -50°C to +160°C Good rustproofing effect on copper.

221 1.1✽3 0.1✽3 -50°C to +200°C Suitable for sealing and lubrication of valves, stopcocks, and 211 1.9✽3 0.2✽3 -50°C to +200°C packing of common chemical equipment.

263 0.7✽4 0.5✽4 -10°C to +100°C Does not cause swelling of silicone rubber. Good electrical insulation.

258 2.0✽2 0.1✽2 -50°C to +170°C Does not cause swelling of silicone rubber. Good electrical properties and temperature characteristics.

300 0✽3 1.1✽3 -40°C to +200°C Good light transmissivity. Refractive index (n25 D ) 1.4690. Non-flowable.

400 — 1.1✽3 -40°C to +200°C Good light transmissivity. Slightly flowable.

Oil separation Volatile matter content Usage temperature Features

150°C/100h % 150°C/100h % range

Penetration25°C/JIS·

worked

✽1:25°C/JIS·unworked ✽2:150°C/24h ✽3:200°C/24h ✽4:105°C/24h ✽5:120°C/24h ✽6:Viscosity(Pa·s) (Not specified values)

14

Treatment agentsSilicones are chemically inactive, have very low surface tension and provide good water repellency, releasability, and lubrication. Thus, silicones are also commonly used as fiber and fabric processing agents. They are used to treat natural and synthetic fibers or fabrics to make them water repellent or waterproof, to impart flexibility, and are commonly used to improve the texture and sewability of textile goods, resulting in higher grade and more functional products.

● Water repellencyForms a coating (oil film or hard coating) on textiles to provide excellent water repellency.

● SoftnessSilicone greatly reduces the friction coefficient between fibers to achieve distinctive softness.

● DurabilityThe flexible film which forms on the fiber surface improves the durability of the fabric with respect to washing and dry cleaning.

● Rebound resiliency (“stretch-back”)Fabrics have excellent rebound resiliency due to the flexible elastic coating which forms on the fiber surface.

● TransparencySilicone processing agents improve the hyperchromic effect and colorfastness due to the transparent coating which forms on the fiber surface.

● Weather and heat resistanceThe chemical bonds which form the backbone are siloxane bonds (Si-O-Si), so the interatomic bonding energy of these processing agents is high and they have excellent weather and heat resistance.

SR processing agents, water-absorptionprocessing agents


Polon MF-14 Creamy white liquid

Polon MF-14EC Translucent liquid

X-51-1178 Creamy white liquid




Texture improving agents Polon MF-18T Creamy white liquid




KM-2002L-1 Creamy white liquid

KM-2002T Creamy white liquid



Polon MR Creamy white liquid

Polon MK-206 Creamy white liquid

Water repellents KS-7002 Colorless transparent liquid

Poloncoat E Colorless to pale yellow transparent liquid


Polon MF-33A Creamy white liquid

Textile oleums Polon MNST Creamy white liquid

Polon SR-Conc Pale yellow transparent liquid

Polon MF-13 Fluorescent liquid


SILFIX Creamy white liquid

Special processing agents Polon MF-28 Translucent liquid

KS-731 Colorless transparent liquid

Polon MF-50 Pale yellow transparent liquid

15


Non-volatile matter content105°C/3h %

pH Ionic Typical catalyst Features

15 7.0 Non-ion — Amino-modified silicone emulsion. Improved softness and sewability.

34 7.0 Non-ion — Amino-modified silicone emulsion. The slimiest to the touch.

33 5.0 Non-ion — Improves fullness. For dark colored fabrics.

30 4.0 Non-ion — Amino-modified silicone emulsion. Improves smoothness and softness.

40 6.0 Non-ion — Amino-modified silicone emulsion. Yields a smooth, soft hand.

32 6.5 Cation — Amino-modified silicone emulsion. Yields a resilient, soft hand.

38 7.5 Non-ion — Epoxy-modified silicone emulsion. Improves smoothness and softness.

31 6.0 Slightly anionic — High-viscosity reactive silicone emulsion. Imparts a fluffy feel.

30 4.0 Non-ion CAT PM4PS 2 Reactive softener. Imparts a soft feel with stretch back properties.

32 6.7 Anion — Epoxy-modified silicone emulsion. Improves smoothness and softness.

44 6.0 Anion — Reactive softener. Yields a fluffy hand with good resiliency.

40 6.0 Anion — Reactive softener. Coating and anti-melt processing possible.

40 5.0 Anion — Reactive softener. Excellent anti-shrink effect and rebound resiliency.

40 5.0 Anion — Reactive softener. Does not contain organometallic compounds. Forms a silicone rubber film.

60 4.0 Non-ion CAT LZ-1 Emulsion. General purpose. Somewhat hard finish.

32 3.0 Cation Cat FZ Emulsion type. Excellent durability to repeated washings.

54 — — — Solvent type. Can be used on leathers.

27 — — Cat PG / Cat PD Solvent type. Long-lasting waterproofing is possible.

22 3.5 Non-ion CAT PM4PS 2 For inorganic fibers. Can be used in low-temperature treatment applications if used with a catalyst.

30 6.0 Anion — For inorganic fibers. Good compatibility with phenol resins.

31 6.5 Anion — Imparts smoothness to nonwoven cloth.

— — — Hydrophilic polyester-modified silicone. Suitable for antistatic processing and water-absorption processing.

7.0 Non-ion — Hydrophilic polyester-modified silicone. Suitable for SR processing and antistatic processing.

5.5 Anion Cat PM 4PS 2 Long-lasting water-absorption effect.

16 10.0 Non-ion — Slip prevention agent. Silica powder dispersion liquid.

16 6.0 Slightly cationic — Slip prevention agent. Organic colloidal silica dispersion liquid.

20 — — — Tack prevention agent.

40 7.0 Cation — Improves life span of textile.

Active ingredient100 %



16

Release agentsThe surface tension of silicone is low and it spreads easily, so it provides good wetting of fine, irregular surfaces. It is chemically inactive and can be used with almost all molding materials. Silicone has excellent heat and cold resistance and offers good performance over a wide temperature range. These characteristics are why silicone is used as a mold-release agent in a range of industries including the rubber industry, resin industry, food processing industry, and die casting. Silicone mold-release agents are available in various forms including emulsions, oil types, solvent types, bake-on types, and sprays.

● VersatilityCan be used in diverse applications including rubbers, plastics, metals, and foods.

● Mold-releasabilitySilicone mold-release agents are non-compatible with almost all organic materials, so they offer outstanding mold-release performance.

● Heat and cold resistanceThey have excellent resistance to heat and cold and provide good mold-release results over a wide temperature range.

● Chemical stabilityThey are chemically inactive, so they do not cause corrosion, swelling, or deformation of molds or molded items.

● Can be used on complex moldsSilicone mold-release agents have low surface tension, so they provide good wetting of intricately shaped molds. This means that even complex molded items release easily from the mold.


KM-9736 Creamy white liquid











KM-860A Creamy white liquid


Silcast U Creamy white liquid

DM-FLUID Colorless transparent liquid

KF-965 Brown liquid


KF-410 Pale yellow liquid



KM-244F Pale yellow transparent liquid

KS-61 White translucent paste

KS-702 Colorless to pale yellow transparent liquid

KS-725 Pale yellow transparent liquid


KS-700 Colorless to pale yellow transparent liquid

KS-7201 Light brown transparent liquid

KS-7200 Pale orange transparent liquid

SEPA-COAT Colorless transparent liquid

Paintable applications KF-412SP Pale yellow liquid

High-temperature applications KF-965SP Brown liquid

For rubbers and plastics RELEASE Colorless transparent liquid

Category Em

ulsion type Oil type

Solvent type Bake-on type

Spray type

Rubber industry,resin industry,food processing industry,die casting,surface processing,synthetic fibers

17

Viscosity Specific gravity Solvent

Features

25°C mPa·s 25°C

Non-volatilematter content105°C/3h %

350 1.00 33 — For food packaging containers. Low stickiness.

1000 1.00 33 — For food packaging containers.

10000 1.00 33 — For food packaging containers. Low stickiness and good antiblocking effect.

Low 1.02 33 — For food packaging containers. Good paintability.

Medium 0.96 30 Xylene (20%) Acts to clean molds. Good wetting of molds.

Low 0.99 38 — General industrial use. Good gloss enhancement and surface lubrication.

Low 1.00 28 — General industrial use. KM-740 low-concentration type.

Low 1.00 30 —

High 1.00 30 — For general-purpose industrial use.

High 1.00 38✽3 — Good dilution stability, mechanical stability and storage stability.

High 1.00 61 —

Low 1.00 60 — Concentrated type. Good cost performance.

High 1.00 60 — Concentrated type. Viscosity of the base oil is higher than that of KM-860A.

Medium 0.97 32 — Suitable for die casting.

100-100000 0.97 over 98.5✽2 — Suitable for applications in which water and solvents cannot be used.

100-1000/100000 0.97 over 98.5✽2 — Good thermal oxidation stability even at temperatures above 250°C.

400 1.07 over 99✽1 — Good paintability.

900 1.02 over 98✽1 — Methylstyryl-modified. Good heat resistance.

500 0.90 over 97✽1 — Long chain alkyl-modified. Good paintability and lubricity.

700 0.89 over 95✽1 — Long chain alkyl-modified. Good paintability.

1600 1.03 — — Water-soluble type. Can be diluted with water or alcohol.

— — over 99✽2 — Paste type. Long-lasting with good heat resistance and lubricity.

— 0.82 5 Industrial gasoline High-viscosity dimethyl silicone fluid base.

— 0.86 50 Petroleum hydrocarbons Particularly long-lasting.

— 0.99 50 Toluene Suitable for heat-cure resins.

— 0.83 15 Industrial gasoline Little migration of the mold-release agent to the molded item. Provides repeated mold-release.

— 0.79 15 Industrial gasoline For low-temperature bake-on applications.

— 0.81 20 Industrial gasoline Meets the requirements prescribed in Notification No. 20 of Japan's Ministry of Health and Welfare.

— 0.80 — Ethyl acetate

Synthetic isoparaffin Forms film at room temperature.

— — — — KF-412 spray.

— — — — KF-965-100cs spray.

— — — Toluene KS-707 spray.

✽1:150°C/3h ✽2:150°C/24h ✽3:150°C/2h (Not specified values)

18

Paper release agentsSilicone releasing agents are also used in the production of release paper. They are used in a wide range of applications in everything from adhesive tapes, films, emblems and labels, to the packaging paper of latex and synthetic rubbers.

● Thin film coatingsThese agents cure to form thin film coatings via chemical reaction.

● Heat-cure, UV-cure, and EB (Electron Beam)-cure

● Releasability● Heat and cold resistance● Adhesion to substrates

Viscosity Active Applications Grade Appearance 25°C ingredient mPa·s %

Non-solvent type,UV-cure applications

Non-solvent type, general purpose

Emulsion type, general purpose

Concentrated coating applications

KS-776A Translucent liquid 15000 30

General purpose KS-839L Translucent liquid 5000 30

KS-847T Translucent liquid 15000 30

KS-779H Translucent liquid 15000 30

Light-release applications KS-837 Translucent liquid 15000 30

KS-778 Translucent liquid 15000 30

Heavy-release applications KS-830 Translucent liquid 15000 30


Paintable applications KS-723A/B A/B translucent liquid 15000/250 25/45

Release-control applications KS-3800 Translucent liquid 2 30

For film KS-774 Translucent liquid 15000 30




KM-3951 Creamy white liquid — 40

KM-768 Creamy white liquid — 30

KNS-3051 Colorless transparent liquid 400 100

KNS-320A Colorless transparent liquid 400 100




X-62-7622 Colorless transparent liquid 150 100

X-62-7052 White opaque liquid 35000 100

KF-2005 Colorless transparent liquid 420 100

UV-cure film applications KS-5508 Translucent liquid 1500 30

✽ Can only be used in limited amounts. Contact a Shin-Etsu sales representative for details.

19


Typical curing Curing

Solvent Features

catalyst method

Toluene CAT-PL-50T Addition The most standard type is suitable for tapes, but is also commonly used for labels.

Toluene CAT-PL-50T Addition Little time-dependence of release properties.

Toluene CAT-PL-50T Addition Easy release with acrylic solvent adhesives. High time-dependence of release properties.

Toluene CAT-PL-50T Addition Easiest release of all easy-release products.

Toluene CAT-PL-50T Addition Easy release with PE laminate paper. Good slickness.

Toluene CAT-PL-50T Addition Particularly good curability and pot life. The standard easy-release product.

Toluene CAT-PL-50T Addition Tighter release than KS-776A, and no tape curling. Suitable for tapes.

Toluene CAT-PL-50T Addition Tighter release than KS-776A. Not slick, and can be used to glue multiple layers.

Toluene CAT-PS-8S Condensation Has paintability not found in conventional release paper silicones.

Toluene CAT-PL-50T Addition Cannot be used alone, but is highly effective for release-control.

Toluene CAT-PL-4 Addition Good adhesion to aluminum foil, and to OPP, PET and PE films. Good residual adhesion. The standard product for film applications.

Toluene CAT-PL-50T Addition This type has greater curability and adhesion than KS-774.

Toluene CAT-PL-50T Addition Low-viscosity version of KS-778.

Toluene CAT-PL-50T Addition Low-viscosity version of KS-847T. Improved resistance to exposure. Superior curability.

Water CAT-PM-10A Addition Easy-release applications. Suitable for common labels.

Water CAT-PM-10A Addition Medium-release applications. Suitable for tapes.

— CAT-PL-56 Addition Easy release, for PE laminates.

— CAT-PL-56 Addition Easy-release applications. Suitable for common tapes and labels.

— CAT-PL-56 Addition Medium-release applications. Suitable for common tapes and labels.

— CAT-PL-56 Addition Tight-release applications. Little time-dependence.

— CAT-PL-56 Addition Tight-release applications. Release-control agent.

— CAT-7605E✽ UV Exposure to UV light yields a release paper with easy release and good residual adhesion.

— — UV Catalyst unnecessary. One-component type, partial coating is possible, mercapto-modified.

— Purchased separately UV Catalyst necessary. Fast curing. Acrylic type. Nitrogen gas required.

Toluene CAT-PL-5000 UV Medium-release applications. Suitable for substrates with low heat-resistance.

20

Defoaming agentsSilicone defoaming agents are available in oil, solution, powder, and emulsion types. They all have a high defoaming effect when added in small amounts to all types of foaming liquids.

● Defoaming effectDue to their lower surface tension, silicone defoaming agents have greater defoaming action than organic defoaming agents.

● SafetySilicone defoaming agents are highly safe, especially those for food applications, which meet the standards for food additives laid out in Japan’s Food Sanitation Law.

● Heat resistance and chemical resistanceSilicone defoaming agents have good resistance to heat and chemicals, so they are effective with all types of foams and can be used in conditions in which organic defoaming agents cannot.

● Foam-inhibiting effectSilicone defoaming agents have longer-lasting effects than other defoaming agents, and are also effective in preventing foaming from occurring.

● Chemical stabilityThey are chemically inactive, so they are extremely stable and do not attack or react with other substances.




KM-73A Creamy white liquid

KM-73E Creamy white liquid




KM-90 Grayish white translucent liquid


KM-7750B Creamy white liquid



KS-508 Light brown translucent liquid

KS-530 Slightly yellow liquid

KS-531 Pale yellowish white liquid




S-6W-6 Light gray translucent liquid

KS-69 Light gray translucent liquid

X-50-1090B Grayish white translucent liquid

KS-7704S Grayish white translucent liquid

FA-630 Colorless transparent liquid

DM-FLUID Colorless transparent liquid


FA-600 Colorless transparent liquid

KS-602A Colorless transparent liquid


Chemical industry,petroleum industry,food processing industry,fermentation industry,pharmaceutical industry,paints, coatings, inks, and the printing industry,pulp and paper industry, wastewater treatment, textile industry

Category Em

ulsion type Self-em

ulsifying type Oil com

pound type Oil type

Solvent type

21


Viscosity Specific gravity Active ingredient Diluent

Features

25°C mPa·s 25°C %

Low 1.03 46 Water

Low 1.02 19 Water General use.

Low 1.02 22.5 Water General use.

Low 1.02 15.5 Water General use.

Medium 1.03 39 Water

Low 1.01 16 Water Paintable.

High 1.02 34 Water

High 1.04 53 Water Dyeing processes.

Medium 1.02 34 Water

Low 1.01 38 Water

Low 1.02 34 Water High temperature dyeing processes. Pulp manufacturing processes.

Medium 1.01 55 Water Paintable.

2000 1.00 100 Water, alcohol Paintable.

7000 1.03 100 Water, alcohol General use.

1800 1.04 100 Water, alcohol Paintable.

600 1.02 100 Water, alcohol Dyeing processes.

8000 1.01 100 Water, alcohol

8000 1.03 100 Water, alcohol High resistance to alkalinity.

300 1.01 100 Toluene, xylene, etc.

2500 1.01 100 Toluene, xylene, etc.

800 0.99 100 Toluene, xylene, etc. Organic resins. Paints, inks industry. Industrial use.

200 0.99 100 Toluene, xylene, etc. Organic resins. Paints, inks industry. Industrial use.

2000 1.28 100 MXHF, MIBK, etc. Fluorosilicone-based.

100 - 100000 0.97 100 Toluene, xylene, etc.

600 0.99 100 Toluene, xylene, etc. Deaerating agent for epoxy, polyester, polyurethane and acrylic resins.

10 0.92 30 Acetone, methyl ethyl ketone, etc. Fluorosilicone-based. Solvent: Methyl ethyl ketone.

1700 0.87 50 Industrial gasoline, etc.

2 1.38 7.7 MXHF, MIBK, etc. Fluorosilicone-based. Solvent: MXHF.

22

Foam stabilizersSilicone foam stabilizers are products which employ the unique interfacial characteristics of silicones. They are essential ingredients in the production of urethane foams.

● Foam stability (for flexible foams)● Flame-resistance (for flexible foams)● Dimensional stability (for rigid foams)● Cell-opening properties,

fine cells (for semi-hard foams)

Pressure sensitive adhesivesSilicone pressure sensitive adhesives exhibit superior adhesion to a wide range of substrates, regardless of the adherent material.

● Excellent resistance to heat and cold● Excellent re-release properties● Excellent moisture resistance and

chemical resistance.● Adheres to silicone rubbers and

fluoropolymers.● Tape and film with light adhesive types

do not trap air bubbles when applied.● Addition-cure silicone adhesives cure

at lower temperatures compared to peroxide-cure silicone adhesives.

Applications

Grade Appearance

F-607 Light brown transparent liquid

For flexible urethane foams F-606 Light brown transparent liquid

F-242TL Light brown transparent liquid

F-502 Pale yellow transparent liquid

For rigid urethane foams F-350S Pale yellow to light brown transparent liquid

F-506 Pale yellow to light brown transparent liquid

For cold-cure foams F-121 Colorless to pale yellow transparent liquid

F-122 Colorless transparent liquid

For semi-rigid urethane foams F-114 Pale yellow to light brown transparent liquid

KR-100 100 60

KR-101-10 Peroxide 100 60

KR-130 100 60

KR-3700 30 60 For adhesive tapes

KR-3701 30 60

X-40-3237-1 Addition 150 60

X-40-3240✽3 20 60

X-40-3291-1✽3 120 60

X-40-3229 100 60

For protective films X-40-3323

Addition 3 30

X-40-3270 100 60

X-40-3306 15 30

Additive X-92-128 — 2✽5 30

(Adhesion modifires) X-41-3003 — 10✽5 60

Primers KR-3006A✽4 Condensation 150✽5 10

X-40-3501 Addition 100✽5 30

Release agents X-70-201S Addition 4✽5 15

FS Thinner — — —

Adhesive KR-105 Condensation 0.8 70

Applications

Grade Cure method Viscosity Solid content

25°C Pa·s %

23


Viscosity Specific gravity Features

25°C mPa·s 25°C

2300 1.02 Multipurpose product, primarily for slabs and molds (low and medium density).

740 1.4 Produces foams with high air permeability. Good flame-resistance. Suitable for slabs and molds.

1000 1.03 Good foaming stability and flame-resistance. Wide range of catalyst additives. Suitable for slabs and molds.

400 1.04 General purpose. Good compatibility with PPG, and suitable for all applications including slabs, sprays, and froths.

70 1.06 Can be added to isocyanates. Good compatibility with PPG.

650 1.06 Can be used in isocyclo urethane. Good compatibility with PPG, and low thermal conductivity.

53 0.98 Highly active, and cells are fine and uniform. Also suitable for slabs.

4 0.92 Good cell-opening properties and wet-set properties.

1500 1.04 Good cell-opening properties. Fine cells.

✽ Benzoyl peroxide ●Adhesive strength: polyimide film substrate 25µm ●Holding power: 25x25mm, 1kg ✽1:200°C/1h ✽2:250°C/1h (Not specified values)●Ball tack: slope: 30° ✽3:When using, add 0.5% by weight of cross-linker X-92-1220. ✽4:When using, add 1% by weight of mechanical adhesion improver KR-3006BT. ✽5:mm2/S

Toluene / xylene BPO✽, other 1 to 2 7.6 (40) 0.5✽1 38 High tack, strong adhesion.

Toluene / xylene BPO✽, other 1 to 2 6.2 (40) 0.1✽1 34 High holding power, high heat resistance.

Toluene BPO✽, other 1 to 2 6.8 (40) 0.1✽1 38 High tack, reduced low-molecular-weight siloxane.

Toluene CAT-PL-50T 0.5 8.6 (30) 0.02✽2 38 Strong adhesion, easy release from fluoro silicone release liner.

Toluene CAT-PL-50T 0.5 7.7 (30) 0.2✽1 42 High tack, suitable for splicing tape.

Toluene CAT-PL-50T 0.5 4.9 (30) 0.1✽2 30 Medium adhesion, good adhesion when heated.

Toluene CAT-PL-50T 1 6.6 (30) 0.02✽2 38 Medium adhesion, little or no residue left on substrate after heating.

Toluene CAT-PL-50T 0.5 4.5 (30) 0.1✽1 28 Adhesive for use on silicone rubber. High adhesion to silicone rubber.

Toluene CAT-PL-50T 0.5 0.06 (30) 0.01✽2 2 Low adhesion, adhesion can be controlled when used together with KR-3700.

Toluene CAT-PL-50T 0.25 0.06 (30) 0.01✽2 2 Low concentration version of X-40-3229. Good working properties.

Toluene CAT-PL-50T 0.5 0.18 (30) 0.01✽2 4 Low adhesion, heat resistant, adhesion can be controlled when used together with KR-3700.

Toluene CAT-PL-50T 0.25 0.02 (30) 0.01✽2 — Very adhesion, no primer necessary.

Toluene — — — — — For improving adhesion.

Toluene — — — — — For improving adhesion to silicone rubber.

Toluene CAT-PS-8S 0.5 — — — For addition-cure PSA, for peroxide-cure PSA.

Petrolum naphtha CAT-PL-50T 0.5 — — — For addition-cure PSA, specially designed for inline coating.

— CAT-PL-50T 0.5 — — — Release agent for silicone PSA, easy-release type.

— — — — — — Diluent.

Toluene / xylene CAT-PS-8S 3 — — — Adhesive for silicone rubber.

Solvent Catalyst Holding

Ball tack

Features power, mm No.

Adhesion(adhesive thickness)

N/25 mm (µm)

Amt. of catalystto add weight

%

24

Silicone resinsSilicone resins are composed of highly branched 3-dimensional polymers. They form coatings with outstanding heat resistance, weather resistance, electrical insulative properties, and water repellency. They generally dissolve in organic solvents, and are used in diverse applications to improve durability, safety, and reliability.

● Heat resistanceSiloxane bonds (Si-O-Si) form the backbone of the molecular structures of silicone resins. Siloxane bonds have high bonding energy and the temperature of thermal decomposition is high, so these resins have excellent heat resistance. There is typically no decomposition, degradation, or discoloration even in high-temperature conditions of 250°C or more.

● Electrical insulative propertiesSilicone resins exhibit excellent electrical properties over a wide temperature range. In particular, even at high temperatures there is little decline in electrical insulative properties, and good resistance to arcing.

● Weather resistanceThey exhibit outstanding weather resistance, with little degradation caused by UV rays or other elements. Coatings exhibit little yellowing, chalking, or loss of gloss, and they maintain stable coating properties over long periods.

● Water repellencyDue to the orientation of the methyl groups in the molecules, the surface of the cured material has excellent water repellency.

● High hardnessSilicone resins are highly branched 3-dimensional polymers, and the backbone structure of the cured material is similar to that of glass, so these materials can be used to modify surfaces to make them inorganic substances.

Viscosity Non-volatile Type / Applications Grade Appearance matter content Solvent Curing agent Features 25°C mPa·s 105°C/3h %

KR-220L Solid flakes Softening point 70°C — — Solid type. Flame-resistant and low smoking.

KR-240 Colorless transparent liquid 6 25 Xylene, butanol Fast curing. Particularly good resistance to solvents.

KR-242A Colorless transparent liquid 12 50 Toluene, IPA Heat-resistance. Flame-resistance.

KR-271

Colorless to pale yellow 200 50 Xylene Forms relatively flexible films.

Straight silicone resin transparent liquid

KR-282

Colorless to pale yellow 150 50 Xylene Good balance between drying properties and film characteristics.

transparent liquid

KR-311

Colorless to pale yellow 25 60 Xylene Forms relatively hard films. Good drying properties.

transparent liquid

KR-216

Colorless to pale yellow Softening point — — Ideal for cooking with polyesters, alkyds, epoxies, etc.

transparent solid flakes 75°C

KC-89S Colorless transparent liquid 3 — — Methyl silicone which contains methoxy groups.

KR-500 Colorless transparent liquid 25✽1 — — — Methyl silicone which contains methoxy groups.

KR-511 Colorless transparent liquid 100✽1 — — — Imparts resistance to heat, weather, and chemicals.

KR-213

Colorless to pale yellow 15 — —

transparent liquid

KR-9218


transparent liquid

Silicone polyester resin KR-5230 Pale yellow transparent liquid 300 60 ✽2 Flexibility.

KR-5235 Pale yellow transparent liquid 180 60 ✽2 ✽3 ✽4 Soil resistant. Releasaility.

Silicone alkyd resin KR-5206 Pale yellow transparent liquid 400 50 Xylene For room-temperature drying.

ES-1001N Pale yellow to tan transparent liquid 350 45 Tluene Typical silicone epoxy varnish.

Silicone epoxy resin ES-1002T Pale yellow transparent liquid 350 60 Xylene KC-224B Curing agent for eoxy can also be used.

ES-1023 Pale yellow transparent liquid 250 45

Xylene, Generally Low acid values.

diaceton alcohol unnecessary

KR-400 Pale yellow transparent liquid 1.2✽1 — — — High hardness. Non-solvent alcohol-release coating agent.

KR-251 Colorless transparent liquid 15 20 Tluene Forms the thinnest, hard, transparent films of all varnishes used for moisture-proofing of surfaces.

Silicone coating agent KR-255 Pale yellow transparent liquid 100 50 Toluene, xylene Typical varnish for moisture-proofing.

KR-112 Colorless transparent liquid 250 70 Toluene, xylene Unnecessary Forms soft, solvent-resistant films.

KR-114A Colorless transparent liquid 1000 50 Ligroin Soft, waxy film whch absorbs strain. Film can be removed with a solvent.

KR-285 Pale yellow transparent liquid 150 50 Xylene Low foaming during curing, and suitable for impregnation of large equpment.

KR-2706 Colorless transparent liquid 9000 30 Tluene C-2706 The most flexible of all varnishes for sleeves. Good heat resistance.

KR-165 Translucent liquid 7000 30 Xylene D-168 Typical varnish for sleeves. Self-extinguishing. Good transparency.

KR-166 Translucent liquid 7000 30 Xylene D-168 Self-extinguishing. Excellent film strength.

KR-169 White opaque liquid 20000 30 Xylene D-168 Self-extinguishing. Good flexibility and heat resistance.

KR-2038 Yellowish white opaque liquid 32000 100 — D-2016 Non-solvent type. Self-extinguishing. Good heat resistance.

Silicone resin for modification

For sleeve and cloth processing

25

Viscosity Non-volatile Type / Applications Grade Appearance matter content Solvent Curing agent Features 25°C mPa·s 105°C/3h %

KR-220L Solid flakes Softening point 70°C — — Solid type. Flame-resistant and low smoking.

KR-240 Colorless transparent liquid 6 25 Xylene, butanol Fast curing. Particularly good resistance to solvents.

KR-242A Colorless transparent liquid 12 50 Toluene, IPA Heat-resistance. Flame-resistance.

KR-271

Colorless to pale yellow 200 50 Xylene Forms relatively flexible films.

Straight silicone resin transparent liquid

KR-282

Colorless to pale yellow 150 50 Xylene Good balance between drying properties and film characteristics.

transparent liquid

KR-311

Colorless to pale yellow 25 60 Xylene Forms relatively hard films. Good drying properties.

transparent liquid

KR-216

Colorless to pale yellow Softening point — — Ideal for cooking with polyesters, alkyds, epoxies, etc.

transparent solid flakes 75°C

KC-89S Colorless transparent liquid 3 — — Methyl silicone which contains methoxy groups.

KR-500 Colorless transparent liquid 25✽1 — — — Methyl silicone which contains methoxy groups.

KR-511 Colorless transparent liquid 100✽1 — — — Imparts resistance to heat, weather, and chemicals.

KR-213


transparent liquid

KR-9218


transparent liquid

Silicone polyester resin KR-5230 Pale yellow transparent liquid 300 60 ✽2 Flexibility.

KR-5235 Pale yellow transparent liquid 180 60 ✽2 ✽3 ✽4 Soil resistant. Releasaility.

Silicone alkyd resin KR-5206 Pale yellow transparent liquid 400 50 Xylene For room-temperature drying.

ES-1001N Pale yellow to tan transparent liquid 350 45 Tluene Typical silicone epoxy varnish.

Silicone epoxy resin ES-1002T Pale yellow transparent liquid 350 60 Xylene KC-224B Curing agent for eoxy can also be used.

ES-1023 Pale yellow transparent liquid 250 45

Xylene, Generally Low acid values.

diaceton alcohol unnecessary

KR-400 Pale yellow transparent liquid 1.2✽1 — — — High hardness. Non-solvent alcohol-release coating agent.

KR-251 Colorless transparent liquid 15 20 Tluene Forms the thinnest, hard, transparent films of all varnishes used for moisture-proofing of surfaces.

Silicone coating agent KR-255 Pale yellow transparent liquid 100 50 Toluene, xylene Typical varnish for moisture-proofing.

KR-112 Colorless transparent liquid 250 70 Toluene, xylene Unnecessary Forms soft, solvent-resistant films.

KR-114A Colorless transparent liquid 1000 50 Ligroin Soft, waxy film whch absorbs strain. Film can be removed with a solvent.

KR-285 Pale yellow transparent liquid 150 50 Xylene Low foaming during curing, and suitable for impregnation of large equpment.

KR-2706 Colorless transparent liquid 9000 30 Tluene C-2706 The most flexible of all varnishes for sleeves. Good heat resistance.

KR-165 Translucent liquid 7000 30 Xylene D-168 Typical varnish for sleeves. Self-extinguishing. Good transparency.

KR-166 Translucent liquid 7000 30 Xylene D-168 Self-extinguishing. Excellent film strength.

KR-169 White opaque liquid 20000 30 Xylene D-168 Self-extinguishing. Good flexibility and heat resistance.

KR-2038 Yellowish white opaque liquid 32000 100 — D-2016 Non-solvent type. Self-extinguishing. Good heat resistance.

✽1:mm2/s ✽2:3-propylene Glycol monomethyl Ether Acetate ✽3:3-Methoxy-Methyl-1-Butyl Acetate ✽4:Buthanol ✽5:Benzoyl peroxide (Not specified values)

Generallyunnecessary

Generallyunnecessary

Titanate compounds,in condensationreactions with

alcoholic hydroxylgroups

Ideal for cooking with polyesters, alkyds, epoxies, etc.

26

Paint additivesSilicone paint additives have very low surface tension. This property makes them very effective when added in small amounts to paints. Silicone paint additives are highly effective for surface modification, and for preventing various paint film flaws.

● SlicknessSilicone paint additives function to lower the friction coefficient of the paint film surface, making it slicker.

● Forms hammertone finishesSilicone paint additives are used to create hammertone finishes by the formation of cells due to a convection effect in the paint film.

● Prevent floating and floodingSilicone is dispersed in the interior and surface of the paint film, thus preventing the convection effect during paint drying.

● Prevent blockingDimethyl silicone fluid contains various functional groups that react with paint resins, thus improving durability and compatibility with paints and providing an antiblocking effect.

● Defoaming effectSilicone paint additives function to break down foam in paints.

● Improved resistance to moisture and salt waterThe molecules contain functional groups which bond with metals and inorganic matter, and contain functional groups which bond with the paint vehicle. This improves the adhesiveness of the paint film and improves its resistance to salt water.


KP-301 Colorless transparent liquid

Reduce friction coefficient KP-306 Colorless transparent liquid

KP-109 Colorless to brown transparent liquid

Form hammertone finishes KP-310 Colorless transparent liquid

KP-310B Colorless transparent liquid


KP-326 Colorless to pale yellow transparent liquid

Improve leveling KP-341 Pale yellow to light brown liquid




KP-360A Light brown transparent liquid

KP-361 Light brown transparent liquid


KP-355 White, waxy consistency



Prevent blocking of plywood KP-358 Colorless transparent liquid







KP-330 Pale yellow transparent liquid

Defoaming KP-650 Milky white liquid





✽ PGM: Propylene glycol monomethyl ether

Improve adhesion, moisture resistance, and salt water resistance

27

Viscosity Specific gravity Solvent

Active ingredient Standard addition

Features25°C mm2/s 25°C % quantity wt%

1.0 0.88 Toluene 10 0.05-1.0 Good compatibility and recoating properties.

1.7 0.88 Xylene 10 0.05-1.0 Product formulated as a measure against platinum catalyst poisoning.

80 0.97 PGM✽ 50 0.01-0.2 Good slickness.

70 0.87 Toluene 10 0.05-1.0 General purpose.

150 0.87 Xylene 10 0.1-1.0 Forms vivid hammertone finishes.

160 1.03 — 100 0.001-0.5 Good anti-mottling and antiblocking effect.

8.0 1.01 Toluene 50 0.01-1.0 Good anti-mottling effect. Has defoaming effect.

750 1.03 — 100 0.001-0.5 Good anti-mottling effect and prevents orange peel. Good recoating properties.

15 0.98 PGM✽ 30 0.1-5.0 Especially suitable for water solution paints.

20 1.01 — 100 0.1-2.0 Especially suitable for water emulsion paints.

900 1.05 — 100 0.01-2.0 Good anti-motting effect and prevents orange peel. Suitable for solvent-based and UV paints.

20 0.89 Isopropyl alcohol 50 0.1-1.0 General purpose.

30 0.89 Isopropyl alcohol 50 0.1-1.0 Good slickness.

1.5 0.93 Toluene 50 0.5-2.0 Good compatibility and slickness.

— — — 100 0.1-1.0 Waxy consistency, good compatibility.

45 0.97 — 100 0.1-1.0 General purpose.

40 0.96 — 100 0.1-0.5 Good compatibility and durability.

55 0.98 — 100 0.2-0.5 Good durability.

100 0.97 — 100 0.1-1.0 Good slickness, compatibility, and durability.

80 0.98 — 100 0.01-0.5 Good characteristics for carton coating.

2.5 0.88 Toluene 20 0.01-1.0 For cellulose paints.

80 0.97 — 100 0.1-1.0 Good slickness and durability.

70 0.97 — 100 1.0-2.0 Good slickness.

50 0.97 — 100 0.1-1.0 Product formulated as a measure against platinum catalyst poisoning.

2.5 0.88 Toluene 10 0.01-0.05 Good recoating properties.

1500 1.01 (Emulsion) 55 0.01-0.1 For water-based paints. Good recoating properties.

2.0 1.38 m-Xylene hexafluoride 7.7 0.001-0.5 For solvent-based paints. Good defoaming properties. Can also be used as a defoamer.

6.0 0.91 n-butanol 50 1.0-4.0 Contains amino groups.

2.0 0.91 n-butanol 50 1.0-4.0 Contains mercapto groups.

25 0.92 n-butanol 50 1.0-4.0 Contains epoxy groups.


28

One-componentRTV rubbersWith one-component RTV silicone rubber compounds, work can begin as soon as the product is ejected from its tube or cartridge. These products become elastic rubbers after curing, and adhere well to almost all materials as they cure. These properties make one-component RTV silicone rubbers suitable for a wide range of applications.

● Electrical propertiesThey have outstanding electrical properties, in terms of volume resistivity and ability to withstand high voltage.

● Heat and cold resistanceThey can be used over a wide temperature range (-40°C to +180°C).

● Shock resistanceThe cured rubbers have excellent rubber elasticity and absorb vibration and shock.

● Weather resistanceOne-component RTV rubbers exhibit almost no deterioration when exposed to the outdoor elements for long periods, because they have outstanding resistance to UV rays, ozone, and moisture.

● WorkabilityThese products are easy to use, because they can be ejected from their tubes (or other containers) and used immediately.

Oil andsolventresistance

Coating KE-3423 Condensation (acetone) KE-347 Condensation (acetone) KE-3475 Condensation (acetone) KE-3495 Condensation (acetone) Sealing, coating KE-4895 Condensation (alcohol) KE-4896 Condensation (alcohol) KE-1830 Addition KE-1884 Addition KE-3479 Condensation (acetone) KE-348 Condensation (acetone) KE-4897 Condensation (alcohol) KE-4898 Condensation (alcohol) Sealing KE-1820 Addition KE-1825 Addition KE-1831 Addition KE-1833 Addition X-32-1947 Addition KE-1056 Addition

Potting KE-1151 Addition

Coating, potting KE-1842 Addition Sealing, coating, potting X-32-1964 Addition KE-3424G Condensation (acetone)

Sealing, coating KE-3494 Condensation (acetone)

Flame-resistance KE-3490 Condensation (acetone) Sealing KE-40RTV Condensation (oxime) KE-4890 Condensation (alcohol) Sealing, coating KE-3497 Condensation (acetone) MIL specifications

Sealing KE-3498 Condensation (acetone) KE-3493 Condensation (acetone) Heat-dissipating sealing KE-3466 Condensation (acetone) Thermal KE-3467 Condensation (acetone) conduction

Heat-dissipating sealing, KE-1862 Addition

X-32-2020 Addition

potting KE-1867 Addition

Electrical KE-3491 Condensation (acetone) conduction

Sealing KE-3492 Condensation (acetone)

Ultra heat- KE-3417✽4 Condensation (acetone) resistance

Sealing KE-3418✽4 Condensation (acetone)

FE-123 Condensation (acetic acid)

Sealing FE-61 Addition

Potting FE-57 Addition Sealing, potting X-32-1619 Addition KE-3427 Condensation (acetone) Plastic bonding Sealing

KE-3428 Condensation (acetone) KE-41 Condensation (acetic acid) KE-42 Condensation (acetic acid)

Sealing KE-44 Condensation (oxime)

KE-45 Condensation (oxime) KE-441 Condensation (oxime) Sealing, coating KE-445 Condensation (oxime) KE-45S Condensation (oxime)

Curing method Applications Intended use Grade

(Byproduct gas)

Generalpurposeindustrial

General electrical applications

29

0.6 5 0.98 20 140 0.5 0.3 (aluminum) Reduced low-molecular-weight siloxane.55 4 1.04 30 300 2.5 1.0 (aluminum) Medium viscosity.2.5 5 1.04 25 200 1.0 0.4 (aluminum) Low viscosity.5.5 11 1.03 30 200 1.1 0.3 (aluminum) Low viscosity, reduced low-molecular-weight siloxane.5 11 1.04 40 140 1.5 0.5 (aluminum) Low viscosity, reduced low-molecular-weight siloxane.50 12 1.04 38 170 1.7 0.8 (aluminum) Medium viscosity, reduced low-molecular-weight siloxane.

110 — 1.27 40 300 4.3 2.0 (aluminum) High viscosity.55 — 1.22 35 230 3.5 1.6 (aluminum) Reduced low-molecular-weight siloxane, low-temperature curing.75 2 1.06 30 350 2.5 1.5 (aluminum) High viscosity.— 1 1.05 30 400 2.0 1.2 (aluminum) Paste consistency.

100 12 1.04 40 200 2.0 0.8 (aluminum) High viscosity, reduced low-molecular-weight siloxane.— 6 1.06 40 360 2.2 0.8 (aluminum) Paste consistency, reduced low-molecular-weight siloxane.— — 1.08 45 600 5.4 2.0 (aluminum) High viscosity.— — 1.06 29 600 3.3 1.5 (aluminum) Paste.

120 — 1.28 30 400 3.9 2.3 (aluminum) Flame-resistant UL V-0 certified product.140 — 1.36 33 330 3.4 1.8 (aluminum) Good adhesion to PPS, heat resistant.100 — 1.14 36 230 2.9 2.0 (aluminum) Reduced low-molecular-weight siloxane, low-temperature curing.800✽1 — 0.99✽3 90✽2 — — — Cold-resistant transparent gel.2500✽1 — 1.00 90✽2 — — — Cold-resistant thixotropic gel.4.0 — 1.00 13 200 0.4 0.2 (aluminum) Low viscosity, low hardness.12 — 1.03 29 160 2.9 0.8 (aluminum) Reduced low-molecular-weight siloxane, low-temperature curing.20 6 1.32 50 180 4.0 0.4 (aluminum) Reduced low-molecular-weight siloxane, UL certified product, electrode coating material.50 8 1.40 35 250 2.5 1.5 (aluminum) UL certified product, reduced low-molecular-weight siloxane.— 3 1.18 43 350 2.5 1.5 (aluminum) UL certified product, reduced low-molecular-weight siloxane.— 12 1.58 60 200 2.9 1.0 (aluminum) UL certified product.— 6 1.48 50 200 2.0 1.3 (aluminum) UL certified product, reduced low-molecular-weight siloxane.40 13 1.07 35 250 3.5 0.7 (aluminum) Medium viscosity, reduced low-molecular-weight siloxane.— 1 1.07 45 480 3.9 1.5 (aluminum) Paste consistency, reduced low-molecular-weight siloxane.— 1 1.46 73 30 2.0 0.8 (aluminum) Reduced low-molecular-weight siloxane.50 7 2.80 88 30 3.1 0.5 (aluminum) Reduced low-molecular-weight siloxane, UL certified product.

100 4 2.90 91 30 3.6 0.5 (aluminum) Reduced low-molecular-weight siloxane, UL certified product.60 — 2.22 83 80 6.0 1.3 (aluminum) UL certified product, Medium viscosity.

100 — 2.82 78 40 2.5 1.0 (aluminum) Reduced low-molecular-weight siloxane.60 — 2.92 75 60 2.1 1.0 (aluminum) Reduced low-molecular-weight siloxane, UL certified product.— 5 1.09 50 350 3.0 1.0 (aluminum) Reduced low-molecular-weight siloxane, electrically conductive.— 2 1.88 85 30 2.0 1.0 (aluminum) Reduced low-molecular-weight siloxane, electrically conductive.45 12 1.05 35 200 1.4 0.8 (aluminum) Reduced low-molecular-weight siloxane, cannot be used for electrical insulation.— 5 1.09 45 200 2.0 1.4 (aluminum) Reduced low-molecular-weight siloxane, cannot be used for electrical insulation.— 5 1.34 40 250 2.5 1.0 (aluminum) Oil- and solvent-resistant (fluorosilicone).60 — 1.43 25 170 1.7 0.6 (aluminum) Oil- and solvent-resistant (fluorosilicone).

2000✽1 — 1.28✽3 60✽2 — — — Oil- and solvent-resistant gel.20 — 1.46 25 130 1.1 0.2 (aluminum) Oil- and solvent-resistant (fluorosilicone).55 6 1.01 24 260 0.4 0.4 (aluminum) Adheres to plastics.— 3 1.05 32 320 1.5 1.3 (aluminum) Adheres to plastics.

100 6 1.04 30 250 2.5 1.0 (aluminum) High viscosity.— 5 1.05 28 400 2.0 1.0 (aluminum) Paste consistency.70 40 1.04 25 300 2.0 1.2 (aluminum) High viscosity.— 6 1.05 30 350 2.0 1.0 (aluminum) Paste consistency.15 60 1.04 20 280 1.7 1.0 (aluminum) Low viscosity.5 20 1.05 25 200 2.0 0.3 (aluminum) Low viscosity.

0.6 60 1.05 20 350 2.0 — Diluted with solvent.

Before curing After curing

Viscosity Tack-free time Density Hardness Elongation at Tensile strength Shear strength FeaturesPa·s min 23°C g/cm3 Durometer A break % MPa MPa

✽1:mPa·s ✽2:Needle penetration ✽3:at 25°C ✽4:Cannot be used for electrical insulation. (Not specified values)

30 31

Two-component RTV rubbers(for electric and electronic applications)

A two-component RTV sil icone rubber compounds cures by adding a specified amount of a curing agent to the base compound. Like one-component RTV rubbers, two-component RTV rubbers have outstanding electrical properties and resistance to heat and cold, while also offering improved deep-section curability and storage stability.

● Properties identical to those of one-component RTV rubbersElectrical properties, heat and cold resistance, shock resistance, weather resistance, curing characteristics, etc.

● Deep-section curabilityThe curing reaction proceeds uniformly at the surface and internally, regardless of rubber thickness.

● Adjustability of cure speedCure time can be adjusted by changing the type or quantity of curing agent, or by heating.

● StorabilityThe base compound and curing agent are stored separately, so the product will not become unusable due to curing during storage. Two-component RTV rubbers can be stored for long periods.

Curing method Before curing After curing

Applications Intended use Grade Appearance Viscosity Workable Standard cure Curing Blend Hardness Shear strength Elongation at Shear strength (byproduct gas) Pa·s time 23°C/h time h/°C agent ratio Durometer A MPa break % MPa

✽1:mPa·s ✽2:Needle penetration (Not specified values)

Sealing KE-1800T (A/B) Addition Translucent paste A:350/B:200 6.0 1/120 — 100/100 1.08 26 5.5 600 1.5 (PBT)

KE-66 Condensation (alcohol) Grayish white liquid 5 1.5 72/23 CAT-RC 100/2 1.25 40 1.5 140 Self-adhesive.

KE-1031 (A/B) Addition Colorless transparent liquid A:1/B:0.7 4.0 2/80 — 100/100 0.97 20 0.4 150 0.1 (aluminum) Transparent, adhesive.

Sealing KE-200 Condensation (acetone) Pale yellow translucent liquid 2.8 0.5 72/23 CX200 100/10 1.01 25 0.4 100

Potting KE-118 Condensation (alcohol) Grayish white liquid 2 0.3 72/23 CAT-118 blue 100/5 1.14 45 1.5 90 — Self-adhesive.

KE-103 Addition Colorless transparent liquid 1 3.0 72/23 CAT-103 100/5 0.97 24 0.2 100 —

Coating KE-108 Condensation (alcohol) Colorless transparent liquid 0.7 6.0 72/23 CAT-108 100/5 0.98 31 — — —

KE-119 Condensation (alcohol) Reddish brown liquid 17 2.0 72/23 CAT-RP 100/10 1.47 68 5.0 100 — High hardness.

Coating KE-109E (A/B) Addition Colorless transparent liquid A:1/B:1 4.0 1/100 — 100/100 1.02 25 1.3 140 0.2 (aluminum) Transparent, adhesive.

Potting

KE-1051J (A/B) Addition Colorless transparent liquid A:800/B:600✽1 3.0 24/23 — 100/100 0.97 65✽2 — — — Transparent gel.

Potting KE-1052 (A/B) Addition Colorless transparent liquid A:1000/B:800✽1 4.0 24/23 — 100/100 0.97 65✽2 — — — Transparent gel.

KE-106 Addition Colorless transparent liquid 3.3 2.0 0.5/150 CAT-RG 100/10 1.02 56 8.0 100 —

KE-1800 (A/B/C) Addition (3-component) White paste A:350/B:14 4.0 1/120 KE-1800B (C) 100/10/2 1.10 28 5.0 600

Sealing KE-1801 (A/B/C) Addition (3-component) White paste A:350/B:14 4.0 1/120 KE-1800B (C) 100/10/2 1.10 28 5.0 600

KE-1802 (A/B/C) Addition (3-component) Black paste A:300/B:14 6.0 1/120 KE-1800B (C) 100/10/2 1.10 30 5.0 600

Sealing KE-1281 (A/B) Addition

A:black liquid A:2/B:1 7.0 1/100 — 100/100 1.37 20 1.0 140 0.3 (aluminum)

Potting B:grayish white liquid

KE-1204.(A/B) Addition

A:reddish brown liquid A:6/B:4 8.0 0.25/100 — 100/100 1.54 70 3.5 70 —

Potting

B:grayish white liquid

KE-1204.(AL/BL) Addition

A:reddish brown liquid A:4/B:2 8.0 0.25/100 — 100/100 1.52 65 3.0 80 —

B:grayish white liquid

KE-513 (A/B) Condensation (hydrogen)

A:white liquid A:4/B:6 0.20 24/23 — 100/10 0.5 10 0.2 110 — Triple-volume foaming.

Foaming

Coating B:black liquid

KE-521 (A/B) Addition (hydrogen)

A:black liquid A:8/B:3 0.15 24/23 — 100/100 0.5 14 0.2 120 — Triple-volume foaming.

B:white liquid

Heat-dissipating sealing

Heat-dissipating potting KE-1861 (A/B) Addition Grayish white liquid A:50/B:50 5.0 1/120 — 100/100 2.22 75 6.4 80 1.0 (aluminum)

UL certified product, Adhesive, heat-dissipating.

Transparent, room-temperature curing.Transparent, room-temperature curing.

Transparent, high strength.UL certified product, adhesive, high strength.Adhesive, high strength.UL certified product, adhesive, high strength.

Adhesive, low hardness, UL certified product.

SealingCoatingPotting

1.7 (glass)1.7 (polycarbonate)1.7 (glass)1.7 (polycarbonate)1.7 (glass)1.7 (polycarbonate)

0.5 (copper)0.5 (bakelite)

0.6 (copper)0.6 (bakelite)

Translucent adhesive, high strength.

Reduced low-molecular-weight siloxane, fast cure.

Flame-resistance

Thermal conduction

General electrical applications

Density23°Cg/cm3

Features

Reduced low-molecular-weight siloxane.

Reduced low-molecular-weight siloxane.

32

Two-component RTV rubbers (for moldmaking)

Two-component RTV silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

● WorkabilityThe base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.

● Mold-releasabilityThe cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.

● Dimensional stabilityThese rubbers offer good dimensional stability, with little shrinkage.

● FlowabilityThey have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.

● Heat and chemical resistanceThese rubbers have outstanding resistance to heat and chemicals.

● Deep-section curabilityMoldmaking RTV silicone rubber compound cures uniformly throughout the mold, regardless of thickness.

● Non-exothermicNo heat is generated during curing, meaning no adverse effects to the original.

●Generally, cure speed can be increased significantly by adding CAT-RS (at 0.1-0.2%) as a cure accelerant to condensation-cure products in addition to the curing agent, or by heating addition-cure products. Other trial products are available, so if the products listed above cause problems in moldmaking, please contact Shin-Etsu for further details.

●Linear shrinkage values are the shrinkage values of a 2 mm sheet, not shrinkage values of an actual rubber mold.●Shrinkage values in condensation-cure products are somewhat higher over longer periods such as one week, one month, etc.

KE-12 Condensation Grayish white 10 30 8/23




A:blue

KE-1222 (A/B) Addition

B:flesh color putty 5 —

KE-1241 Addition Grayish white 30 30 24/23

KE-113 Condensation Reddish brown 7 200 24/23






KE-1417

Condensation

Grayish white 45 90 24/23

Grayish white 45 90 24/23

KE-1300T Addition Translucent 100 90 24/23

KE-1310ST Addition Translucent 80 80 24/23

KE1314-2 Addition Translucent 80 90 24/23

KE-1600 Addition Grayish white 170 150 24/23

A:80 KE-1603 (A/B) Addition Transparent

B:50 90 24/23

KE-1606 Addition Transparent 50 200 24/23

Before curing

Applications General purpose

For welder m

olding M

iddle & high-strength condensation-cure type

High-strength addition-cure type

GradeCuringmethod Appearance Viscosity Workable time✽1 Standard cure time✽2

Pa·s 23°C (min) h/°C

33

✽1:Values shown are the lengths of time during which products maintain flowability at 23°C, but the viscosity of RTV rubber compounds increases with time, so work should be performed in the shortest time possible. ✽2:Standard cure time varies according to the size of the curing material.

✽3:We recommend using CAT-RM when making thick matrices. CAT-RT does not have deep-section curability.✽4:Three-component type with CAT-RM and CAT-24 added. ✽5:CLA-4, a fast-acting curing agent (8 hours at 23°C), is also available.✽6:By using CAT-1310L with KE-1310ST, or using CAT-1314L with KE-1314, work life increases to 300 minutes (23°C).✽7:After adding the curing agent and allowing to set for 24 hours at 23°C, an aftercure process (heating to 150°C for 30 min) can be used

to increase hardness to 70, and increase tensile strength to 7.6 MPa.

CAT-RM 0.5% No 72/23 White 1.30 40 2.5 180 3 0.5 Yes Good working properties.

CLC-229 5.0% No 72/23 Grayish white 1.16 30 3.5 280 3 0.5 Yes Good working properties.

CAT-RM 0.5%✽3

or CAT-RT 0.5% No 72/23 Grayish white 1.17 50 2.5 150 3 0.3 Yes Good working properties.

CAT-RM 0.5% No 72/23 Grayish white 1.18 50 3.0 160 3 0.3 Yes Good working properties.

Fast cure. A:B=1:1 Yes 0.5 Brown 1.72 70 — — — 0.1 Yes

Putty (addition-cure).

CLA-9 10.0% Yes 2/60 Grayish white 1.20 32 (asker C) 2.7 500 — 0.1 Yes Printable oncurved surface.

CAT-RM 0.5% No 72/23 Reddish brown 1.50 70 5.5 120 3 0.8 Yes

CAT-RM 0.5%✽4 Three-component

or CAT-24 4.5% No 72/23 Light blue 1.32 83 6.5 70 3 1.0 Yes

type.

CAT-RM 0.5%✽4 Three-component

or CAT-24 4.5% No 72/23 Light blue 1.40 88 7.5 70 3 1.0 Yes

type.

Standard type.

CX-32-1714 5.0% No 72/23 Grayish white 1.14 30 4.5 300 15 0.3 Yes

Middle & high strength.

Hardness: 20°



Hardness:15°



CAT-1417-30 5.0% No 72/23 Light blue 1.13 30 3.6 300 23 0.3 Yes

CAT-1417-40 5.0% No 72/23 Reddish brown 1.13 40 5.0 260 25 0.3 Yes

CAT-1300 10.0%✽5 Yes 2/60 Translucent 1.10 40 5.0 300 17 0.1 Yes

For vacuum molding. CAT-1310S 10.0%✽6 Yes 2/60 Translucent 1.08 40 6.0 350 25 0.1 Yes

Multipurpose.

For vacuum molding. CAT-1314S 10.0%✽6 Yes 2/60 Translucent 1.08 44 5.8 300 25 0.1 Yes

Oil bleed.

CAT-1600 10.0% Yes 24/23 Light blue 1.27 45✽7 6.5✽7 200 15 0.1 Yes High hardness.✽7

A:B=1:1 Yes 24/23 Transparent 1.03 28 4.0 450 12 0.1 Yes High transparency.

CAT-RG 10.0% Yes 24/23 Transparent 1.03 30 4.5 350 12 0.1 Yes High transparency.

After curing


Improves urethane resistance.Hardness: 30°, Middle & high strength.

Improves urethane resistance.Hardness: 40°, Middle & high strength.

Heat resistant type.For casting of low-melting point alloys.

Standard quantity Curing Test sample Appearance Density Hardness Shear strength Elongation at Tear strength Linear Deep-section Features of curing agent inhibition creation time h/°C 23°C g/cm3 Durometer A MPa break % kN/m shrinkage % curability

34

SealantsSilicone sealants are elastic sealing materials that offer outstanding durability, weather resistance, and adhesion. As buildings and structures move, such as during earthquakes and typhoons, silicone sealants move flexibly with them. They are therefore commonly used in sealing applications in high-rise buildings and housing, civil engineering, clean rooms, and in the joints of aquariums.

● Durability and weather resistanceOutstanding durability and weather resistance, with almost no degradation from UV rays or ozone.

● AdhesionWith the use of an appropriate primer, silicone sealants offer high adhesion to almost all materials.

● Moisture resistanceOur silicone sealants have superior durability, weather resistance, and adhesiveness, so they form airtight, moisture-proof seals that last for years.

● Resistance to salt damageSilicone sealants are highly resistant to salt damage, so they can be used in buildings and factories in coastal areas, offering high durability.

General purpose SEALANT-N Oxime Paste

Anti-mold SEALANT-4588 Oxime Paste

Antibacterial, anti-mold SEALANT-4515 Oxime Paste

For fire doors SEALANT-40N Oxime Paste

SEALANT-456 Oxime Paste

SEALANT-MASTER-300LS Oxime Paste

For clean rooms

PURE SEALANT Oxime Paste

PURE SEALANT S-type Acetone Paste

For plastics SEALANT-72 Alcohol Paste

Ultra heat-resistant KE-3418 Acetone Paste

For glass SEALANT-A Acetic acid Paste

For high-transparency seals SEALANT-420 Acetic acid Paste

General purpose SEALANT-70 Aminoxy Base resin: paste

Curing agent: liquid

Base resin: paste

For large aquariums MARINE SEALANT GX Aminoxy Curing agent:

Grayish white paste Curing agent: Gray paste

Applications Grade Curing

Appearance

method

Category One-com

ponent Two-com

ponent Three-com

ponent

Produced on a made-to-order basis.

General purpose,CW applications

35

1.04 20 1.4 540 General purpose, high modulus, non-corrosive.

1.03 20 1.4 580 Anti-mold, high modulus.

1.05 28 2.0 390 Antimicrobial, anti-mold, high modulus.

1.29 26 1.4 480 High modulus (specified for use with Category B aluminum fire doors).

1.29 25 1.5 600 Medium modulus, good elongation, high adhesive strength.

1.29 25 1.6 1150 Low staining, good elongation, high adhesive strength.

1.05 44 2.7 340 Low emission of low-molecular-weight siloxane, high adhesive strength.

1.05 37 2.6 360 Good results in wafer absorption testing.

1.35 30 2.0 600 Medium modulus, non-corrosive. For plastics.

1.09 40 2.5 300 Heat-resistant sealant (continuous use at 250°C possible).

1.03 20 1.6 500 General purpose, high modulus, high adhesive strength, fast cure.

1.05 25 2.9 400 High modulus, high adhesive strength, highly transparent.

1.26 13 1.1 1250 General purpose, low modulus.

1.27 16 1.6 1500 Low modulus, superior deep-section curability.

Density Hardness Tensile strength Elongation at break Features

23°C g/cm3 Durometer A MPa %


36

Rubber compoundsSilicone rubber compounds have properties of both inorganic and organic materials. They are composed of unique si l icone gums and high-purity silica. Silicone rubber compounds offer many outstanding features not found in other organic rubbers.

● Heat and cold resistanceAt 150°C there is almost no change in physical properties, and they maintain elasticity at temperatures at which typical organic rubbers become brittle.

● Weather resistanceSilicone rubber compounds can be exposed to UV rays, wind, and rain for long periods with almost no change in physical properties.

● Oil resistance, solvent resistance,chemical resistanceSilicone rubber compounds have superior oil resistance at high temperatures. They also have outstanding resistance to solvents and other chemicals, and are nearly impervious to polar organic compounds and dilute acids and alkalis.

● Electrically insulativeThey are stable over a wide range of temperatures and frequencies. And even when immersed in water, there is almost no decline in performance.

● Compression setThey are stable over a wide temperature range (-60°C to +250°C).

● Transparency and coloringSilicone rubber compounds are highly transparent, meaning they can be easily colored with pigments.

Application/Type

Grade

Appearance

Density Hardness 23°C g/cm3 Durometer A

Voltage resistant KE-655-U Grayish white 1.22 60

KE-675-U Grayish white 1.29 70

KE-931-U Milky white translucent 1.07 31



General molding KE-961-U Grayish white 1.22 63



KE-961T-U Milky white translucent 1.17 62

KE-971T-U Milky white translucent 1.20 71





KE-742-U Pale yellow 1.10 45


Non post-cure KE-762-U Grayish white 1.36 60








KE-5590-U Milky white translucent 1.13

50

53

KE-552-U Light tan 1.16 52

Heat resistant KE-582-U Light tan 1.25 80

KE-552B-U Pale yellow 1.17 52

High strength E-5W-55-U Pale yellow 1.17 53


Low compression-set

Anti-static silicone rubbercompound

Reducedlow-molecular-weight siloxanesilicone rubbercompound

37

✽1:Angle ✽2:150°C/22h (Not specified values)

Vulcanizing Features

agent

Tear strengthCrescent

kN/m

Compression set180°C/22h

%

Elongationat break

%

Tensilestrength

MPa

Dielectricbreakdown strength

kV (1mm)

Volumeresistivity

TΩ·m

400 10.5 28 15✽2 28 50 C-8A

300 8.5 23✽1 10✽2 28 10 C-8A

480 4.7 15✽1 15 — — C-8

370 6.5 15✽1 11✽2 23 7 C-8

330 8.2 23✽1 11✽2 24 8 C-8

320 7.3 20✽1 11✽2 25 6 C-8

220 7.5 20✽1 9✽2 25 3 C-8

100 8.8 8 12✽2 24 4 C-8

310 9.7 25✽1 — — — C-8A

260 8.8 25✽1 11 — — C-8

410 7.8 14 11✽2 22 8 C-8

320 8.6 15 10✽2 23 8 C-8

270 8.0 16 10✽2 23 5 C-8

210 7.2 18 9✽2 24 6 C-8

300 4.4 8 12 26 100 C-4

250 6.0 9 12 29 20 C-4

250 6.7 11 12 26 10 C-4

200 7.5 13 16 26 100 C-4

160 8.5 14 18 29 20 C-4

300 7.6 9 9✽2 23 10 C-4

140 8.3 11 5 23 5 C-4

100 8.5 7 7✽2 25 2 C-4

80 6.0 — 18 — — C-8

330 8.2 23 9 — — C-8

370 9.7 12 11 — — C-23N

430 9.3 16 11 — — C-8

550 10.0 15 18✽2 27 900 C-23N

250 7.0 20 23 25 900 C-23N

550 9.8 14 24✽2 28 500 C-23N

650 11.0 35 32 27 100 C-8

550 9.4 41 18 27 200 C-8

Boots, diaphragms, bellows, clamp covers, seals, O-rings, rubber rolls.

Packing, keypads, diaphragms, rolls, etc.

Boots, diaphragms, bellows,clamp covers, seals, O-rings.

High-temperature gaskets, O-rings, rubber rolls, and oil seals.

High-temperature gaskets, high-temperature packing.

Packing, rubber tubing, keypads,rubber insulation-coated wire.

Boots, diaphragms, gaskets, seals, O-rings, belts.

38








Application/Type

Grade

Appearance



40

40


50

50


63

62


70

68


79

77

KE-594 Milky white translucent 1.09 40

KE-597 Milky white translucent 1.20 70


KE-530B-2-U Milky white translucent 1.13 36

KE-540B-2-U Milky white translucent 1.13 39


Tube KE-1571-U Milky white translucent 1.19 74



KE-3601SB-U Black 1.17 62

KE-3711-U Black 1.14 66

KE-3801M-U Black 1.20 73

KE-5612G-U Grayish white 1.47 59

KE-5620BL-U Black 1.38 57

Flame-resistant

KE-5620W-U White 1.40 59

KE-5634-U Translucent 1.20 70

Low hardness, high elongation

Rapid curesilicone rubber compound

Electricallyconductive

Generalextrusion molding

39


agent

550 8.0 10 12✽3 — 30 C-23N

690 8.2 22 9✽2 — — C-25A/B

530 10.5 13 8✽3 26 70 C-23N

590 9.8 26 9✽2 — — C-25A/B

450 11.5 15 11✽3 25 300 C-23N

470 11.5 24 9✽2 — — C-25A/B

430 11.0 19 13✽3 26 500 C-23N

450 11.0 26 9✽2 — — C-25A/B

310 10.5 13 14✽3 29 700 C-23N

430 10.5 23 9✽2 — — C-25A/B

600 7.3 7.0 8 — — — Catalyst included, for food containers.

350 8.8 13.0 9 — — —

770 5.0 10 22 — — C-8

940 10.9 32 20✽2 — — C-8A Baby nipple.

700 9.7 17 9✽2 — — C-15

530 10.5 16 — 28 600 C-23N

370 9.5 23 35✽2 25 600 C-23N Transparent tubing for beverages, hose.

650 10.0 36 — 26 900

520 8.1 37 — 28 650

290 7.0 10 — — 0.05✽4 C-8A

170 6.5 — 12 — 0.05✽4 C-8A

190 5.3 15✽1 18✽2 — 0.03✽4

310 7.2 12 15 29 110 C-3

430 7.0 11 27 28 80

410 6.5 12 21 27 50

370 7.7 14 20 29 300 C-25A/B

Rubber insulation-coated wire, rubber tubing, for food containers.

C-153AR-153A

CAT-PL-2

HC-101CAT-PL-2

X-93-1609✽5

C-3

X-93-1609✽5

C-3


kN/m


%

Elongationat break

%

Tensilestrength

MPa


kV (1mm)

Volumeresistivity

TΩ·m

Electrically conductive rubber sheets,gaskets, O-rings, packing,contact point rubber.

Rubber insulation-coated wire,rubber sleeves, cloth tubing,insulative molded items.

✽1:Angle ✽2:150°C/22h ✽3:100°C/22h ✽4:Ω·m ✽5:X-93-1609 is a flame retardant. (Not specified values)

40









Steam resistant KE-7611-U Pale yellow 1.15 61


For transfer rolls KE-765-U Pale yellow 1.17 63


For rubber rolls KE-7008-U Pale yellow 1.30 29


KE-503-U White 1.10 32

Oil bleed KE-5042-U White 1.14 43


Heat conductive KE-6801-U Dark blue 1.90 85

Low-temperature applications KE-136Y-U Pale yellow 1.16 52

Application/Type

Grade

Appearance


FE-251-U Pale yellow 1.41 54


FE-271-U Grayish white 1.50 73




Solvent resistant(fluorosilicone)

SEP-1711-U Yellow 1.11 70

SEP-1721-U Pale yellow 1.15 72

SEP-1731-U Gray 1.21 70

SEP-363-U Black 1.40 70

High durability (SEP rubber)

41

✽1:Angle ✽2:150°C/22h ✽3:150°C/70h ✽4:105°C/70h (Not specified values)

410 9.5 12 9 — — C-15

330 9.1 11 9 — — C-8A Packing for pots.

300 8.8 15 10 — — C-8A

340 10.0 — 8 27 10 C-8 Heat-resistant transfer rolls.

110 8.5 — 11 26 10 C-8

450 3.8 5 13 — — C-3 Low compression-set materials.

240 5.2 6 6 — — C-3

650 6.5 18 15 24 50 C-8

500 7.4 22 10 25 50 C-8 Waterproof connectors, seals.

330 7.3 19 17✽3 23 8 C-8

110 4.0 — — 26 30 C-23N Heat-dissipating insulative covering.

620 10.2 32 16✽4 29 200 C-23N Low temperature gaskets, packing.


agent


kN/m


%

Elongationat break

%

Tensilestrength

MPa


kV (1mm)

Volumeresistivity

TΩ·m

430 9.8 15 8 — — C-8A

400 9.8 16 8 — — C-8A

300 9.0 16 9 — — C-8A

520 13.3 38 17 — — C-8A High tear-strength types.

520 12.7 45 14 — — C-8A

300 6.4 10 6 — — C-8A Copolymer.

Flame-resistant diaphragms and check valves.

600 17.0 35 40✽2 — — C-11A General grade.

550 11.0 30 45✽2 — — C-11A Heat-resistant grade.

600 14.0 30 28✽2 — — C-12

General grade for extrusion molding. SEP-BM

400 4.8 25 28✽2 — — C-11A Flame-resistant grade.

42

The name “LIMS” describes a molding system in which l iquid si l icone rubber is used in high-precision injection molding machines. All steps are automated, from mixing to molding. This system saves labor and time, and makes it easy to produce high-quality molded items.

● Saves timeAddition-cure liquid silicone is used, so cure speed is fast and molding time can be reduced.

● Increased productivityThe materials are liquids, so molding can be done at low injection pressures. The system is also suitable for molding of high-precision components.

● Automation of the molding processSuitable for flashless, runnerless molding. And because molded items release easily from the mold after curing, the molding process can be automated.

● Environmentally friendlyThere are no byproducts generated during curing. With flashless and runnerless molding, there is no need to p rocess was te ma te r i a l , mean ing a more environmentally friendly manufacturing process.

LIMS(Liquid silicone rubber Injection Molding System)

Selective Self-adhesivesLIMS Selective Self-adhesives adhere to resins without sticking to the mold, so they allow integrated molding through automation.

*Rubber may adhere to the mold depending on the material used for the mold and the condition of its surfaces. Conduct a check before moving to mass production.Additionally, prolonged continual use may cause deterioration of the mold surfaces, or the LIMS material may adhere to mold surfaces, so be sure to perform regular maintenance.

Application Grade Appearance Viscosity✽ A/B A/B Pa·s

Before curing

KEG-2000-40 (A/B) Translucent 1300/1300






KE-1950-10 (A/B) Translucent 60/60








KE-1935 (A/B) Transparent 80/45

KE-1987 (A/B) Translucent 700/700

KE-1988 (A/B) Translucent 600/450

KE-2014-30 (A/B) Milky white translucent 900/800

Oil bleed KE-2014-40 (A/B) Milky white translucent 1400/1400






Fast cureTransparentHigh strength

Reduced low-molecular-weight siloxaneOil bleed

TransparentHigh strength

Hightransparency

Application Grade Appearance Viscosity✽

A/B A/B Pa·s

Before curing





Co-injection molding andInsert molding

43

Density Hardness Tensile strength Elongation at break Tear strength Compression set Volume resistivityAppearance

23°C g/cm3 Durometer A MPa 150°C/22h % Crescent kN/m 150°C/22h % TΩ·m Features

After curing (after 120°C/5 min press-cure, 150°C/1 hour post-cure)

Transparent 1.13✽1 40✽1 9.6✽1 640✽1 32✽1 6✽2 50✽1

Transparent 1.13✽1 50✽1 11.1✽1 580✽1 40✽1 8✽2 50✽1

Transparent 1.13✽1 60✽1 10.5✽1 450✽1 40✽1 9✽2 50✽1

Transparent 1.13✽1 70✽1 10.2✽1 350✽1 35✽1 7✽2 50✽1

Transparent 1.12✽1 40✽1 11.0✽1 700✽1 32✽1 6✽2 50✽1

Transparent 1.13✽1 50✽1 11.8✽1 530✽1 40✽1 8✽2 50✽1

Transparent 1.08 13 3.9 700 10 12✽3 10

Transparent 1.10 20 6.4 900 25 15✽3 10

Transparent 1.10 32 8.8 700 25 22✽3 10

Transparent 1.12 36 9.8 700 30 36✽3 10

Transparent 1.12 42 9.8 650 35 20✽3 10

Transparent 1.13 52 9.3 550 40 28✽3 10

Transparent 1.14 60 7.8 380 35 22✽3 10

Transparent 1.15 70 7.8 350 40 50✽3 10

High transparency 1.03 55 5.9 350 8.0 30✽3 10

High transparency 1.15 55 8.3 430 35 50✽3 100 High transparency.

High transparency 1.15 62 7.8 250 35 49✽3 100

Translucent 1.12✽4 30✽4 8.4✽4 750✽4 25✽4 19✽4 (150°C/70h) 50✽4

Translucent 1.13✽4 40✽4 8.8✽4 600✽4 30✽4 30✽4 (150°C/70h) 50✽4

Translucent 1.14✽4 50✽4 10.2✽4 560✽4 31✽4 24✽4 (150°C/70h) 50✽4

Translucent 1.14✽4 60✽4 9.7✽4 450✽4 39✽4 20✽4 (150°C/70h) 50✽4

Translucent 1.14 30 8.9 730 22✽2 15 10

Translucent 1.13 40 8.8 600 32✽2 12 10

Translucent 1.14 52 9.5 470 38✽2 15 10

(Not specified values)✽ Rotational viscometer

Sheet curing conditions: ✽1:150°C/5min press-cure, 150°C/1h post cure ✽2:150°C/10min press-cure, 200°C/4h post cure✽3:120°C/10min press-cure, 150°C/1h post cure ✽4:150°C/10min press-cure

Oil bleed, high strength andlow specific gravities.

Non post cure, oil bleed andlow volatile.

They are highly safe and meet the standards of Japan's Food Sanitation Law.

Before using, be sure to determine whether these materials comply with comparable laws in your country.

Flashless, runnerless molding.

Continuous automated molding with short cycle times is also possible.

Density Hardness Tensile strength Elongation at breakAppearance

23°C g/cm3 Durometer A MPa % Features

After curing (after 120°C/10 min press-cure, 150°C/1h post cure)

Translucent 1.11 40✽5 9.0 630

Translucent 1.12 52✽5 8.3 420

Translucent 1.12 60✽5 7.3 240

Translucent 1.13 68✽5 7.7 230

✽5:120°C/10min (Not specified values)

For PC and PBT resins.

44

T he ST se r ie s i s a l i ne of p ro duc t s of heat-shrinkable silicone rubber tubing. The inner diameter shrinks by about 50% simply by heating. The ST series are used for insulation, protection, and sheathing applications. These rubber tubings have superior heat and cold resistance, flexibility, and electrical insulative properties. They typically maintain their performance characteristics over a wide temperature range, from -50°C to +200°C.

● Labor saving● Electrical properties

Heat-shrinkable silicone rubber tubing

Electrically conductive rubber productsThe EC series is a line of silicone rubber compounds that have been given electrical conductivity through the addition of carbon and other electrically conductive materials.

● Durability

Thermal interface phase change materialsPhase change materials are high-performance thermal interface sheets that soften with heat. Heat softens the sheet for a better conforming fit, which reduces thermal resistance. The result is superior dissipation of heat.

● Made of silicone, so they provide long-lasting, dependable performance.

● Sheets are easy to handle.● Reworkable.

Thermal interface silicone productsThe TC series is a line of products made of thermal conductive silicone rubbers which offer superior electrical insulation. Special fillers have been added to boost thermal conductive performance. The products of Low-hardness TC series are elastic, have good contact to heating elements and heatsinks, and offer highly effective heat dissipation.

● Heat dissipation

Thickness Density Application/Type Grade Appearance 23°C mm g/cm3

TC-10SAS White 0.10 2.2

TC-20SAS White 0.20 2.2

TC-30A Dark blue 0.30 2.2

TC-30CG Light reddish brown 0.30 2.5

TC-30FG Light blue 0.30 3.0

TC-30EG Light blue 0.30 3.1

TC-30BG White 0.30 1.5

TC-15TCI Pink 0.15 2.2

TC-11Kl Gray 0.11 —

TC-100HSV-1.4 Gray 1.0 2.5

TC-100THS Light reddish purple 1.0 2.9

TC-100THE Light blue/Light reddish purple 1.0 2.9

TC-100TXS Gray 1.0 3.1

TC-100TXE Light blue/Gray 1.0 3.1

TC-100SP-1.7 Gray/Reddish brown 1.0 2.3

TC-SPA-3.0 Gray 1.0 2.4

TC-100CAS-10 Dark Gray 1.0 1.9

TC-100CAB-10 Light reddish brown 1.0 2.2

TC-100CAD-10 Light reddish purple 1.0 3.0

TC-100CAT-20 Gray 1.0 3.2

High-hardness Thermal Interface Silicone Rubber

Double Sided Thermal Interface Silicone Tapes

Thermal Interface SiliconeUltra Soft Pads

Electromagnetic Noise Suppression and Thermal Interface Silicone Rubber Sheets

Thermal Interface Silicone Soft Pads

● For details, see our catalogs: “Thermal Interface Silicone Rubber” and “Thermal Interface Materials of Silicone 2011”.

Application/Type Grade Appearance Density Hardness

23°C g/cm3 Durometer A

EC-A Yellowish brown 1.92 74

EC-BL Black 1.11 66

EC-BM Black 1.20 70

EC-BH Black 1.17 65

EC-TC Black 1.28 75

● For details, see our catalog: “Electrically Conductive Silicone Rubber Products: EC Series”.

Initial Bond line Grade Appearance thickness thickness µm µm

PCS-LT-30 Gray 120 28

● For details, see our catalogs: “Thermal Interface Silicone Rubber” and “Thermal Interface Materials of Silicone 2011”.

Application/Type

Grade Appearance


ST-DG Light gray 1.2 70

ST-DG Light gray 1.2 70

ST-HT Colorless translucent 1.3 65

● For details, see our catalog: “Heat-Shrink Rubber Tubing: ST Series”.

Heat-shrinkable silicone rubber tubing

Thermal Interface Phase Change Materials

Electrically conductive rubber products

45

Hardness Elongation Tensile Tear Dielectric Volume Thermal Thermal at break strength strength breakdown resistivity conductivity✽2 resistance✽5 Features

Durometer A % MPa kN/m kV TΩ·m W/m·K °C/W

— — — — 3.2 — 1.0✽3 — Enables screwless mounting.

— — — — 6.5 — 1.0✽3 —

80 110 5.7 8.0 12 1 0.8 1.20 General purpose type.

90 — 24.1 81 7 1.8 1.7 0.70

90 — 17.0 50 7 10 2.5 0.43 Medium thermal conductivity.

95 — 16.8 53 7 10 3.1 0.30 High thermal conductivity.

90 — 51.0 223 12 10 7.3 0.26

— 50 46 60 12.0 — 0.6✽4 0.64 High insulation.

— 100 40 80 10.0 — 1.6 0.35✽4 High insulation, low thermal resistance.

25＊1 — — — 23 — 1.2 1.08 Both-side adhesive type.


30＊1 — — — 20 — 2.1 0.66 One-side adhesive type.




4＊1 — — — — — 2.3 0.42 Both-side adhesive type.

10＊1 — — — 22 — 1.8 0.65

10＊1 — — — 22 — 2.3 0.49

10＊1 — — — 15 — 3.2 0.43

20＊1 — — — 15 — 4.5 0.32

Ultra low hardness, excellent cost performance.

✽1:Asker C ＊2:Based on ISO22007-2 ＊3:Laser flash method ＊4:Calculation value (Not specified values)✽5:Shin-Etsu method Hi-hardness thermal interface silicone rubber:TO-3P Transistor method, Low-hardness thermal interface silicone rubber sheets:Model heator method

Elongation at break Tensile strength Tear strength Rebound resiliency Compression set Volume resistivity Thermal conductivity Features

% MPa kN/m % 150°C/22h Ω·m W/m·K

160 2.5 8.0 45 30 8 x 10-5 1.00 High electrical conductivity.

300 5.7 9.2 42 27 0.009 0.38

170 7.0 15 50 24 0.025 0.63 General purpose type.

250 5.2 7.0 54 20 0.05 0.57

120 4.4 9.5 40 40 0.007 0.72 High thermal conductivity.

Density Softening point Thermal conductivity✽ Thermal resistance✽

Featuresg/cm3

°C W/m·K cm2·k/W

2.4 48 3.0 0.11 Low thermal resistance.

Elongation at break Tensile strength Tear strength Dielectric breakdown Volume resistivity Shrinkage Features

% MPa kN/m strength kV (1mm) Ω·m %

350 6.0 15 25 2 x 1012 about 50 UL-224 certified product.

350 6.0 15 25 2 x 1012 about 50 General grade.

350 5.4 24.5 20 2 x 1012 about 40 Transparent grade.



＊ Laser flash method (Not specified values)

46

Silicones — playing a key role in all corners of industry.A role that will only grow.Shin-Etsu silicones are put to the test in a diverse spectrum of modern industries.We will continue to respond to these diverse needs, and ever strive to explore further possibilities.

Electric and electronic industriesTransportation and m

achinery

In cell phone keypads

For electrical insulation and moisture-proofing of electronic products

For heat-dissipation

As packing, O-rings, and other rubber components

For lubrication of bearings in transport vehicles and machinery

For processing of harness terminals

As rubber rolls for copiers and printers

For rubber components in engine compartments and for improved tire performance

As paint additives and for surface modification

For attachment/bonding of electric and electronic components

47

Chemical, textile, paper, and pulp industriesCosm

etic and food industriesConstruction m

aterials

For joint seals in clean rooms

Silicone sealants, an indispensable construction material

Application of Sil icone

As water repellents for construction materials

As foam stabilizers for urethane foam molding

For shampoos, rinses, and other hair care products

For joint sealing, including those of large aquarium tanks

For imparting water repellency, moisture resistance, and softness to textiles

As silylating agents in pharmaceutical manufacturing

As mold-release agents in the manufacturing of food packaging containers, and as defoaming agents in the production of food products

As additives for lipsticks and other cosmetic products

For release paper release agents for tapes, labels, and stickers

Silicone Division6-1, Ohtemachi 2-chome, Chiyoda-ku, Tokyo, Japan

Sales and Marketing Department I< Fluids > Phone : +81-(0)3-3246-5132 Fax: +81-(0)3-3246-5361

Sales and Marketing Department II< Silanes & Resins >Phone : +81-(0)3-3246-5131 Fax: +81-(0)3-3246-5361

Sales and Marketing Department III< Rubber & LIMS >Phone : +81-(0)3-3246-5151 Fax: +81-(0)3-3246-5362< Designed Products >Phone : +81-(0)3-3246-5101 Fax: +81-(0)3-3246-5364

Sales and Marketing Department IV< RTV Rubber & Grease and Fluid compounds >Phone : +81-(0)3-3246-5152 Fax: +81-(0)3-3246-5362< Sealant >Phone : +81-(0)3-3246-5153 Fax: +81-(0)3-3246-5365

The data and information presented in this catalog may not be relied upon to represent standard values. Shin-Etsu reserves the right to change such data and information, in whole or in part, in this catalog, including product performance standards and specifications without notice.

Users are solely responsible for making preliminary tests to determine the suitability of products for their intended use. Statements concerning possible or suggested uses made herein may not be relied upon, or be construed, as a guaranty of no patent infringement.

The silicone products described herein have been designed, manufactured and developed solely for general industrial use only; such silicone products are not designed for, intended for use as, or suitable for, medical, surgical or other particular purposes. Users have the sole responsibility and obligation to determine the suitability of the silicone products described herein for any application, to make preliminary tests, and to confirm the safety of such products for their use.

Users must never use the silicone products described herein for the purpose of implantation into the human body and/or injection into humans.

Users are solely responsible for exporting or importing the silicone products described herein, and complying with all applicable laws, regulations, and rules relating to the use of such products. Shin-Etsu recommends checking each pertinent country's laws, regulations, and rules in advance, when exporting or importing, and before using the products.

Please contact Shin-Etsu before reproducing any part of this catalog. Copyright belongs to Shin-Etsu Chemical Co., Ltd.

Shin-Etsu Silicones of America, Inc.1150 Damar Drive, Akron, OH 44305, U.S.A.Phone : +1-330-630-9860 Fax : +1-330-630-9855

Shin-Etsu do Brasil Representação de Productos Químicos Ltda.Parque Cultural Paulista Av. Paulista, 37-4º Andar,CEP 01311-902 Sao Paulo/SP BrazilPhone : +55-11-2246-2873 Fax : +55-11-2246-2799

http://www.silicone.jp/e/C Shin-Etsu 2005.9/2014.2 6 B.P. Web in Japan.

The Development and Manufacture of Shin-Etsu Si l icones are based on the following registered international quality and environmental management standards.

Gunma Complex ISO 9001 ISO 14001 (JCQA-0004 JCQA-E-0002)

Naoetsu Plant ISO 9001 ISO 14001 (JCQA-0018 JCQA-E-0064)

Takefu Plant ISO 9001 ISO 14001 (JQA-0479 JQA-EM0298)

Comprehensive Product Data Guide - WordPress.com · synthesis High bonding energy Siloxane bonds...

Documents

Transcript of Comprehensive Product Data Guide - WordPress.com · synthesis High bonding energy Siloxane bonds...