Composition Data Sheet Shindengen

5/20/2018 Composition Data Sheet Shindengen

1/61

[Edition 4.0]

http://www.shindengen.co.jp/company_e/environmental/green.html

Issued: September 2011

Table of Contents

Product Composition Data Sheet (Table of Ingredients)

Input Lists

Shindengen Electric Manufacturing Co., Ltd.Purchasing Department

This document includes lists to help suplliers entering data efficiently upon our request for Product

Composition Data Sheets (Table of Ingredients). This can be used in conjunction with referencing Input

Manual Environmental Document

Please always make sure using latest version of this list by referring our website below since regular update

carried out.

Either of macro-enabled or macro-disabled Product Composition Data

Sheets (Table of Ingredients) has been sent to suppliers to fill in. If right

message appered when you open file, it indicate the file is a macro-enabled

in which pop up function available for the columns of Composition,

Substance Name, CAS No. and Purpose of Inclusion. No message appeared indicates macro-

disabled version with no pop up function. You are asked to input data in each column manually in such

case.

"Composition" listP2

"Purpose of Inclusion" listP7

"Raw Material Name" list P9

(D-004)


2/61

[Shindengen Group] List of Composition

(Back to Front) (IB-004)

Composition Application in Scope Details of Classes

[A101] Brushes Wipers for motors and rotary switches.

[A102] Lead terminals

Rod type terminals for discrete parts,

through hole terminal, terminal to

connect heterogeneous parts, terminalssoldered afterward.

[A103] External Terminal PlatingThe external plating applied to the lead

or terminal of electronic components.

[A104] Base Plating

Base plating for improving the

solderability of the outer plating. May

also be used as a structural element.

[A105] Outlet lead wireCovered wire extended as a terminal to

connect heterogeneous part.

[A106] CommutatorConductive parts on the other side of

brushes.

[A107] Contacts

Contacts provided in parts or for

conductive joints between similar parts

like connectors, regardless of movable

or immovable.

[A108] TerminalsTerminals, other than those taking the

form of electrical leads [A102].

[A201] Solders solder in general

[A202] Conductors

Conductors, other than terminal parts

such as electric cable cores and copper

wiring.

[A301] Cases/covers

Cases and covers which constitute

parts; accessory covers are included in

this category, regardless of materials

resin or metals.

[A302] Coils

Insulation-covered electric wires

wound on multiple cores used for coil

or transformer. For springs used as a

structual parts choose [B103], then for

core materials of coil or transformer

and such, choose [B109] Base

materials/raw materials.

[A303] Coil bobbins

Coil or transformer to be winded by

insulation-covered wires. (For core

materials for coils and transformers

[B109] Base materials/raw

materials).

[A304] Jackets (cladding)

Jackets made from resin, cement or

glass (e.g., glass passivation). which

cover parts to mainly reinforce

insulators or protect internal elements.

[A305] Sleeves (outer trunking

Sleeves to wrap the outer of cases or

covers, which are a thin resin or rubber

film to protect, insulate or prevent them

from corrosion.

Composition List

[Category A2]

Conductors other

than contacts and

terminals

[Category A3]

Device Element

[Category A1]

Contacts and

terminals


3/61




Composition List

[A306] Housings

Exterior for connectors, terminals and

the main body of terminal blocks.

[A107] Contacts must be used for the

portion of contact.

[A307] Package Body (Mold Resin) All manner of mold resin.

[A308] Printed-circuit boards

General printed-circuit boards,

including ceramic, aluminum and

flexible substrates.

[A309] Mold basesBases to mount elements of parts (part

itself or internal elements).

[A310] Fillers

Fillers to fill the gaps inside electric

wires. Fillers used for insulation choose

[B201] Insulations.

[A311] Electrodes Electrodes of parts or components.

[A312] Electrolyte/impregnating fluidElectrolyte for capacitors and

impregnating fluid for coils.

[A313] Internal elements

Portions that hold some or all of that

component's functionality. For chips,

please select [C102] Device Chips.

[A314] Parts bodies

Portions of the outer exporsure other

than terminals. For those not of outside

exposure , please choose [A313]

Internal elements.

[A315] Sealing rubbers

Rubber lids to seal the internal

elements used mainly for electrolytic

capacitor.

[A316] Terminal Boards and Sealing Boards

Boards primarily composed of resin

used as base or surface of electrolytic

capacitors or other elements, or boards

with embedded electrodes.

[B101] Spacers/supports

Supports of multilayer structures,

fixate parts or the portions of structure

packages.

[B102] Screws, bolts, nuts and washers

Screws, bolts, nuts and washers

* If more than one of each type used,describe each of them as Component 1,

Component 2 in the row of

Supplemental Note..

[B103] Springs

Springs or plates used for expansion

and contraction, which are made of

metal or resin.

[B104] FramesFrames including exterior cases or

covers.

[B105] Plating

All manner of metal plating other than

[A103] External Terminal Platingand [A104] Base Plating.

[B106] Rivets (including joint pins)Rivets and connector pins, draft pins

and the like.

[Category A3]

Device Element

(Cont'd from the

previous page)

[Category B1]

Structural Elements


4/61




Composition List

[B107] Rotor, Shafts

Axes of revolution for motors and

rotary switches, including drive shafts.

For magnet for motors and such,

choose [B109] Base materials/raw

materials .

[B108] Rollers

Rollers similar form of a vehicle tire or

cylinder, which must rotate, including

rotational parts of casters or rollers of

conveyers.

[B109] Base materials/raw materials

Main ingredient of metalic based

material or resin that may not be

categorized others. This include

magnetic materials such as core,

magnet, or ceramic materials. Please

ensure to enter Raw material namewhatever is available from the list of

Raw material name.

[B110] Optical parts (light-permeable parts)

Transparent or translucent parts

including glass, lenses, optical filters,

which are made from resin or glass.

[B111] Movable parts for structures

Movable parts between two or more

parts functioned to activate either or all

parts, which are hinges, stays and the

like and made of metal or resin.

[B112] Fixtures for structures

Fixtures between two or more parts

functioned to fixate them, which are

immovable such as L-shaped metal

fixtures and are made of metal or resin.

[B113] Bearings

Bearings to support rotors and axes of

revolution with antiwear features. (For

the magnet parts of motors, choose

[B109] Base materials/raw materials)

.

[B201] Insulators

Composition that are intended to

function as insulator including

dielectrics. Papers, resins, boards,tubes, tape and so forth are in the

scope.

[Category B2]Insulators

[B301]Tubes

Cylindrical featured tube with circle or

square cross section surface. It should

have minimum one opening mouth

including applications other than

binding. For the tubes mainly for

insulation, select [B201] Insulators..

[B302] Binding materials

Binding bands for electric wires (e.g.

insulation locks) or binding materialsfor fixing (e.g. mount bases).

[Category B1]

Structural Element

(Cont'd from the

previous page)

[Category B3]

Biding wire

elements


5/61




Composition List

[B401] Tapes

Tape or adhesive, such as double stick

tape, fabric tape, plastic tape and so

forth. For tape which is intended to

function as insulators, please choose

[B201] Insulators..

[B402] Stickers, LabelsStickers in general marking or printing

on one side and adhesive on the other.

[C101] Die bonding adhesivesAdhesive to bond device chips on the

bases.

[C102] Device chips

Core elements of semiconductors

which are structured with silicon and

gallium arsenide.

[C103] Lead frames

Frames to form external leads of

semiconductor devices or metal frames

to installing wiring.

[C104] Internal wires

Electric wires for high conductivity,

which are used in semiconductors,

including bonding wires.

[C105] Radiating fins

Limited usage for dissipating or

radiating heat inside parts, which are

made of high heat transfer metal such

as aluminum (if heat is radiated from

lead frames, choose [C103] Lead

frames).

[D101] Coating agentsMostly liquid type agents to protectoptic lenses or coated surfaces, protect

them from rusts and insulate them.

[D102] Organic solderability preservativesUsed as antioxidanton on copper foil

surface such as printed circuit borad.

[D103] Resists Resist inks for printed circuit board.

[D104] Coating compositions

All manner of paint or coating

materials intended for use as coloring

or insulation.

[D105] Seals, Stamps, Inscriptions

Seals, stamps (stamp ink), printing

(printer/copy machine ink), IC packageand other markers, model number

inscriptions and so forth.

[E101] Sealant/bulking agentsSealant/agents to seal or fill resins such

as silicon, acrylic or epoxy.

[E102] Base compoundsMaterials supplied liquid, which

comprise major part of the content.

[E103] Lubricant agents

Liquid or solid agents to be applied to

movable parts in structural components,

including grease and machine oil.

[E104] Adhesive agents

Liquids (solid after application) usedfor the purpose of adhering or

conjoining parts or components. For the

adhesive to bond device chip, please

choose [C101] Die Bonding

Adhesives..

[Category B4]

Stickum

[Category C1]

Device elements

[Category E1]

Liquid agents

[Category D1]

Coating and printing


6/61




Composition List

[F101] Dust-Proof/Protective Caps

Caps placed on hatches or junctures for

the purpose of dust-proofing or

protecting and which are removed

during operation.

[Category F1]

Part or Component

Accessories

[Z101] All ResistorsAll resistors on the circuit board

assembly.

[Z102] All CapacitatorsAll capacitators on the circuit board

assembly.

[Z103] All InductorsAll inductors on the circuit board

assembly.

[Z104] All ConnectorsAll connectors on the circuit board

assembly.

[Z105] All SemiconductorsAll semiconductors on the circuit board

assembly.

[Z106] All Printed Circuit BoardsAll printed circuit boards on the circuit

board assembly.

[Z107] All Insulated/Non-Insulated ConductorsAll insulated/non-insulated conductors

on the circuit board assembly.

[Z108] All HarnessesAll harnesses on the circuit board

assembly.

[Z109] All SwitchesAll switches on the circuit board

assembly.

[Category Z1]

Circuit Board

Assembly Parts


7/61

[Shindengen Group] List of Purposes of Inclusion

(Back to Front) (IG-004)

Purpose of Inclusion Application in Scope

JAMA Class

Codes (For the

reference)

Details of Classes

[PA1] Main material

-Main Ingredient/Material

-The ingredient/material whose contentaccounts for at least 50% of a part or

component's gross weight.

(101) [Category PA]Main Purpose

[PB1] Improving thermal

stability

-Stabilizers or other ingredients/materials

used for preventing deteriorations caused

by heat. This include stabilizers contained

in protective paints or coatings.

102

[PB2] Improving thermal

conductivity

-Radiating agents or other

ingredients/materials used for improving

the heat conduction or radiation.

[PC1] Pigments/coloring

agents -Used mainly for coloring (104)

[PC2] Inscription -Used for printings

[PD1] Improving

machining-Mold release or plating for lead terminals 106

[PD2] Bonding/joining -Hardeners

[PE1] Vulcanization-Vulcanization accelerators elasticity and

strength of gum in particular103

[PE2] Improving

mechanical character

-Fillers, catalysts, accelerators, plasticizers

or additives (intended to strengthen or

reinforce).-Substances/materials intended to enhance

the characteristics of solid-form parts or

components.

-Substances/materials intended to improve

durability, water resistance, oil resistance

and the like are also included in this

category.

107

[PE3] Improvement of

abrasion resistance and

anti-wear

-Substances/materials intended for

reducing the coefficient of friction of

contacting surface or inhibiting abrasioncaused by friction.

108

[PF1] Imprving electric

characteristics-Conductivity, copper foil treatment agents 110

[Category PF]For

electricity and

conductivity

[PG1] Improving frame

resistance

-Substances/materials used for improving

fire retardancy or inhibiting combustion or

fuming.

105

[PG2] Improving

corrosion resistance

-Ingredients/materials added for preventing

or inhibiting the formation of rust.109

[PG3] Encapsulation -Filler[PZ1] Non intentional

inclusion-Impurities 998

[Category PZ]

Others

"Purpose of Inclusion" List

[Category PD]For

processing products

[Category PB]For

heat control

[Category PC]Forcoloring

[Category PE]For

machines and

structures

[Category PG]For

frame resistance and

anti-aging


8/61

[Shindengen Group] List of Purposes of Inclusion

(Back to Front) (IG-004)

Purpose of Inclusion Application in Scope

JAMA Class

Codes (For the

reference)

Details of Classes

"Purpose of Inclusion" List

[PZ2] Undisclosed orImpossible to Specify

Individually

-Substances whose purpose of inclusion

cannot be disclosed.-Substances whose inclusion cannot be

disclosed and which are composed of

multiple substances which are included for

separate purposes.

[Category PZ]Others

(Cont'd from the

previous page)

The figures in the brackets ( ) show approximation to the JAMA Class.

* JAMA Class CodesThe JAMA Class Codes are provided by the Japan Automobile Manufacturers Association, Inc.

They are standardized with the JAPIA (Japan Auto Parts Industries Association).


9/61

[Shindengen Group] List of Raw Materials Name

(Back to Front) (IS-002)

Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name

Magnet (Al-Ni-Co) JISC2502 R1 R1 R1

Magnet (Cr-Fe-Co) JISC2502 R2 R2 R2Magnet (Fe-Co-V-Cr) JISC2502 R3 R3 R3

Rare-earth magnet (Sm-Co) JISC2502 R4 R4 R4

Rare-earth magnet (Nd-Fe-B) JISC2502 R5 R5 R5

Ferrite magnet JISC2502 S1 S1 S1

Soft magnetic steel JISC2504 SUY-0 SUY-0 SUY-0




Soft magnetic steel JISC2504 A-12 A-12 A-12Soft magnetic steel JISC2504 A-20 A-20 A-20

Soft magnetic steel JISC2504 A-60 A-60 A-60




Copper-nickel alloy JISC2521 CNP CNP CNP

Copper-nickel alloy JISC2521 CNR CNR CNR

Copper-nickel alloy JISC2521 CNRW CNRW CNRW

Copper-nickel alloy JISC2521 CNW@ CNW CNWSilicon steel JISC2553 23G110 23G110 23G110

Silicon steel JISC2553 23P090 23P090 23P090

Silicon steel JISC2553 23R085 23R085 23R085

Silicon steel JISC2553 23R090 23R090 23R090



Silicon steel JISC2553 27G120 27G120 27G120


Silicon steel JISC2553 27R090 27R090 27R090Silicon steel JISC2553 27R095 27R095 27R095













"Raw Material Name" List


10/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name


Rolled steel for machine structural use JISG3101 SS330 SS330 SS330

Rolled steel for machine structural use JISG3101 SS400 SS400 SS400Rolled steel for machine structural use JISG3101 SS490 SS490 SS490

Rolled steel for machine structural use JISG3101 SS540 SS540 SS540

Rivet steel JISG3104 SV330 SV330 SV330

Rivet steel JISG3104 SV400 SV400 SV400

Cold-finished steel bar JISG3108 SGDA SGDA SGDA

Cold-finished steel bar JISG3108 SGDB SGDB SGDB

Cold-finished steel bar JISG3108 SGD1 SGD1 SGD1

Cold-finished steel bar JISG3108 SGD2 SGD2 SGD2

Cold-finished steel bar JISG3108 SGD3 SGD3 SGD3Cold-finished steel bar JISG3108 SGD4 SGD4 SGD4

Hot-rolled steel sheet for automobile

machine structural useJISG3113 SAPH310 SAPH310 SAPH310







Cold-finished steel bar JISG3123 SGD290-D SGD290-D SGD290-DCold-finished steel bar JISG3123 SGD400-D SGD400-D SGD400-D

Hot-rolled steel sheet JISG3131 SPHC SPHC SPHC

Hot-rolled steel sheet JISG3131 SPHD SPHD SPHD

Hot-rolled steel sheet JISG3131 SPHE SPHE SPHE

Hot-rolled steel sheet JISG3131 SPHF SPHF SPHF

Hot-rolled carbon steel strip JISG3132 SPHT1 SPHT1 SPHT1



Hot-rolled carbon steel strip JISG3132 SPHT4 SPHT4 SPHT4Cold-reduced steel sheet JISG3141 SPCC SPCC SPCC

Cold-reduced steel sheet JISG3141 SPCD SPCD SPCD

Cold-reduced steel sheet JISG3141 SPCE SPCE SPCE

Cold-reduced steel sheet JISG3141 SPCF SPCF SPCF

Cold-reduced steel sheet JISG3141 SPCG SPCG SPCG

Galvannealed coating steel sheet JISG3302 SGHC SGHC SGHC

Galvannealed coating steel sheet JISG3302 SGCC SGCC SGCC

Cold-rolled special steel strip JISG3311 SK85M SK85M SK85M

Cold-rolled special steel strip JISG3311 S30CM S30CM S30CMCold-rolled special steel strip JISG3311 S35CM S35CM S35CM

Cold-rolled special steel strip JISG3311 S45CM S45CM S45CM




11/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Cold-rolled special steel strip JISG3311 S65CM S65CM S65CMCold-rolled special steel strip JISG3311 S70CM S70CM S70CM







Cold-rolled special steel strip JISG3311 SKS2M SKS2M SKS2M

Cold-rolled special steel strip JISG3311 SKS5M SKS5M SKS5MCold-rolled special steel strip JISG3311 SKS51M SKS51M SKS51M




Cold-rolled special steel strip JISG3311 SCr420M SCr420M SCr420M



Cold-rolled special steel strip JISG3311 SNC415M SNC415M SNC415M

Cold-rolled special steel strip JISG3311 SNC631M SNC631M SNC631MCold-rolled special steel strip JISG3311 SNC836M SNC836M SNC836M

Cold-rolled special steel strip JISG3311 SNCM220M SNCM220M SNCM220M

Cold-rolled special steel strip JISG3311 SNCM415M SNCM415M SNCM415M

Cold-rolled special steel strip JISG3311 SCM415M SCM415M SCM415M




Cold-rolled special steel strip JISG3311 SUP6M SUP6M SUP6M

Cold-rolled special steel strip JISG3311 SUP9M SUP9M SUP9MCold-rolled special steel strip JISG3311 SUP10M SUP10M SUP10M

Cold-rolled special steel strip JISG3311 SMn438M SMn438M SMn438M

Cold-rolled special steel strip JISG3311 SMn443M SMn443M SMn443M

Electro-galvanized steel sheet JISG3313 SECC SECC SECC

Electro-galvanized steel sheet JISG3313 SECD SECD SECD

Electro-galvanized steel sheet JISG3313 SECE SECE SECE

Piano wire rod JISG3502 SWRS62A SWRS62A SWRS62A

Piano wire rod JISG3502 SWRS62B SWRS62B SWRS62B







12/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Piano wire rod JISG3502 SWRS77A SWRS77A SWRS77APiano wire rod JISG3502 SWRS77B SWRS77B SWRS77B








Piano wire rod JISG3502 SWRS92B SWRS92B SWRS92BLow-carbon steel wire rod JISG3505 SWRM10 SWRM10 SWRM10

Low-carbon steel wire rod JISG3505 SWRM12 SWRM12 SWRM12







High-carbon steel wire rod JISG3506 SWRH27 SWRH27 SWRH27High-carbon steel wire rod JISG3506 SWRH32 SWRH32 SWRH32

High-carbon steel wire rod JISG3506 SWRH37 SWRH37 SWRH37

High-carbon steel wire rod JISG3506 SWRH42A SWRH42A SWRH42A

High-carbon steel wire rod JISG3506 SWRH42B SWRH42B SWRH42B





High-carbon steel wire rod JISG3506 SWRH57A SWRH57A SWRH57AHigh-carbon steel wire rod JISG3506 SWRH57B SWRH57B SWRH57B











Carbon steel wire rod for cold heading and

cold forgingJISG3507-1 SWRCH10R SWRCH10R SWRCH10R


13/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



cold forging

JISG3507-1 SWRCH12A SWRCH12A SWRCH12A




cold forgingJISG3507-1 SWRCH40K SWRCH40K SWRCH40K


cold forgingJISG3507-1 SWRCH6A SWRCH6A SWRCH6A




cold forging

JISG3507-1 SWRCH8R SWRCH8R SWRCH8R










cold forging

JISG3507-1 SWRCH15A SWRCH15A SWRCH15A


























14/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



cold forging

JISG3507-1 SWRCH20K SWRCH20K SWRCH20K










cold forging











cold forging








Carbon steel wire for cold heading and

cold forgingJISG3507-2 SWCH6R SWCH6R SWCH6R












cold forgingJISG3507-2 SWCH6A SWCH6A SWCH6A






15/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



cold forging

JISG3507-2 SWCH12A SWCH12A SWCH12A










cold forging

JISG3507-2 SWCH20A SWCH20A SWCH20A






cold forgingJISG3507-2 SWCH10K SWCH10K SWCH10K




cold forging

JISG3507-2 SWCH15K SWCH15K SWCH15K


























16/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



cold forging











cold forging


Boron steel for cold heading and cold

forgingJISG3508-1 SWRCHB223 SWRCHB223 SWRCHB223








forging

JISG3508-1 SWRCHB331 SWRCHB331 SWRCHB331
















forgingJISG3508-2 SWCHB223 SWCHB223 SWCHB223










17/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



forging

JISG3508-2 SWCHB334 SWCHB334 SWCHB334










forging

JISG3508-2 SWCHB726 SWCHB726 SWCHB726



Hard steel wire JISG3521 SW-A SW-A SW-A

Hard steel wire JISG3521 SW-B SW-B SW-B

Hard steel wire JISG3521 SW-C SW-C SW-C

Piano wire JISG3522 SWP-A SWP-A SWP-A

Piano wire JISG3522 SWP-B SWP-B SWP-B

Piano wire JISG3522 SWP-V SWP-V SWP-V

Iron wire JISG3532 SWM-A SWM-A SWM-A

Iron wire JISG3532 SWM-B SWM-B SWM-B

Iron wire JISG3532 SWM-F SWM-F SWM-F

Iron wire JISG3532 SWM-N SWM-N SWM-N

Iron wire JISG3532 SWM-P SWM-P SWM-P

Iron wire JISG3532 SWM-C SWM-C SWM-C

Iron wire JISG3532 SWM-R SWM-R SWM-R

Iron wire JISG3532 SWM-I SWM-I SWM-I

Carbon steels for machine structural use JISG4051 S09CK S09CK S09CK

Carbon steels for machine structural use JISG4051 S10C S10C S10C















18/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Carbon steels for machine structural use JISG4051 S43C S43C S43CCarbon steels for machine structural use JISG4051 S45C S45C S45C






Carbon steel for machine structural use

(Manganese steel)JISG4053 SMn420 SMn420 SMn420


(Manganese steel) JISG4053 SMn433 SMn433 SMn433






(Manganese chromium steel)JISG4053 SMnC420 SMnC420 SMnC420


(Manganese chromium steel)JISG4053 SMnC443 SMnC443 SMnC443

Carbon steel for machine structural use(Chromium steel) JISG4053 SCr415 SCr415 SCr415


(Chromium steel)JISG4053 SCr420 SCr420 SCr420







Carbon steel for machine structural use(Chromium steel)

JISG4053 SCr445 SCr445 SCr445


(Chromium molybdenum steel)JISG4053 SCM415 SCM415 SCM415







Carbon steel for machine structural use(Chromium molybdenum steel)

JISG4053 SCM425 SCM425 SCM425




19/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



(Chromium molybdenum steel)

JISG4053 SCM432 SCM432 SCM432










(Nickel chromium steel)

JISG4053 SNC236 SNC236 SNC236


(Nickel chromium steel)JISG4053 SNC415 SNC415 SNC415








(Nickel chromium molybdenum steel)

JISG4053 SNCM220 SNCM220 SNCM220


(Nickel chromium molybdenum steel)JISG4053 SNCM240 SNCM240 SNCM240



















Stainless steel bar JISG4303 SUS201 SUS201 SUS201





20/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Stainless steel bar JISG4303 SUS303Se SUS303Se SUS303SeStainless steel bar JISG4303 SUS303Cu SUS303Cu SUS303Cu


Stainless steel bar JISG4303 SUS304L SUS304L SUS304L

Stainless steel bar JISG4303 SUS304N1 SUS304N1 SUS304N1

Stainless steel bar JISG4303 SUS304N2 SUS304N2 SUS304N2

Stainless steel bar JISG4303 SUS304LN SUS304LN SUS304LN

Stainless steel bar JISG4303 SUS304J3 SUS304J3 SUS304J3


Stainless steel bar JISG4303 SUS309S SUS309S SUS309SStainless steel bar JISG4303 SUS310S SUS310S SUS310S




Stainless steel bar JISG4303 SUS316N SUS316N SUS316N


Stainless steel bar JISG4303 SUS316Ti SUS316Ti SUS316Ti


Stainless steel bar JISG4303 SUS316J1L SUS316J1L SUS316J1LStainless steel bar JISG4303 SUS316F SUS316F SUS316F








Stainless steel bar JISG4303 SUS347 SUS347 SUS347Stainless steel bar JISG4303 SUSXM7 SUSXM7 SUSXM7

Stainless steel bar JISG4303 SUSXM15J1 SUSXM15J1 SUSXM15J1


Stainless steel bar JISG4303 SUS329J3L SUS329J3L SUS329J3L

Stainless steel bar JISG4303 SUS329J4L SUS329J4L SUS329J4L




Stainless steel bar JISG4303 SUS430F SUS430F SUS430F



Stainless steel bar JISG4303 SUSXM27 SUSXM27 SUSXM27



21/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Stainless steel bar JISG4303 SUS410J1 SUS410J1 SUS410J1Stainless steel bar JISG4303 SUS410F2 SUS410F2 SUS410F2





Stainless steel bar JISG4303 SUS420F2 SUS420F2 SUS420F2


Stainless steel bar JISG4303 SUS440A SUS440A SUS440A

Stainless steel bar JISG4303 SUS440B SUS440B SUS440BStainless steel bar JISG4303 SUS440C SUS440C SUS440C




Hot rolled stainless steel plate, sheet and

stripJISG4304 SUS301 SUS301 SUS301


stripJISG4304 SUS301L SUS301L SUS301L


strip JISG4304 SUS301J1 SUS301J1 SUS301J1


stripJISG4304 SUS302B SUS302B SUS302B






stripJISG4304 SUS304Cu SUS304Cu SUS304Cu


strip JISG4304 SUS304L SUS304L SUS304L


stripJISG4304 SUS304N1 SUS304N1 SUS304N1


stripJISG4304 SUS304N2 SUS304N2 SUS304N2


stripJISG4304 SUS304LN SUS304LN SUS304LN


stripJISG4304 SUS304J1 SUS304J1 SUS304J1


strip JISG4304 SUS304J2 SUS304J2 SUS304J2




stripJISG4304 SUS309S SUS309S SUS309S


22/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



strip

JISG4304 SUS310S SUS310S SUS310S










strip

JISG4304 SUS316L SUS316L SUS316L


stripJISG4304 SUS316N SUS316N SUS316N




stripJISG4304 SUS316Ti SUS316Ti SUS316Ti




strip

JISG4304 SUS316J1L SUS316J1L SUS316J1L




















stripJISG4304 SUSXM7 SUSXM7 SUSXM7


stripJISG4304 SUSXM15J1 SUSXM15J1 SUSXM15J1




23/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



strip



stripJISG4304 SUS329J4L SUS329J4L SUS329J4L








strip

JISG4304 SUS430 SUS430 SUS430


stripJISG4304 SUS430LX SUS430LX SUS430LX


stripJISG4304 SUS430J1L SUS430J1L SUS430J1L






strip











stripJISG4304 SUSXM27 SUSXM27 SUSXM27






stripJISG4304 SUS410S SUS410S SUS410S






stripJISG4304 SUS440A SUS440A SUS440A




24/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



strip


Cold rolled stainless steel plates, sheets

and stripJISG4305 SUS301 SUS301 SUS301


and stripJISG4305 SUS301L SUS301L SUS301L


and stripJISG4305 SUS301J1 SUS301J1 SUS301J1


and stripJISG4305 SUS302B SUS302B SUS302B


and strip



and stripJISG4305 SUS304Cu SUS304Cu SUS304Cu




and stripJISG4305 SUS304N1 SUS304N1 SUS304N1


and stripJISG4305 SUS304N2 SUS304N2 SUS304N2


and strip

JISG4305 SUS304LN SUS304LN SUS304LN








and stripJISG4305 SUS309S SUS309S SUS309S


and stripJISG4305 SUS310S SUS310S SUS310S












and stripJISG4305 SUS316N SUS316N SUS316N


and stripJISG4305 SUS316LN SUS316LN SUS316LN


25/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



and strip

JISG4305 SUS316Ti SUS316Ti SUS316Ti




and stripJISG4305 SUS316J1L SUS316J1L SUS316J1L






and strip

JISG4305 SUS317LN SUS317LN SUS317LN










and strip





and stripJISG4305 SUSXM7 SUSXM7 SUSXM7


and stripJISG4305 SUSXM15J1 SUSXM15J1 SUSXM15J1
















and stripJISG4305 SUS430LX SUS430LX SUS430LX




26/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



and strip











and strip

JISG4305 SUS445J2 SUS445J2 SUS445J2




and stripJISG4305 SUSXM27 SUSXM27 SUSXM27






and strip

JISG4305 SUS410S SUS410S SUS410S






and stripJISG4305 SUS440A SUS440A SUS440A





Stainless steel wire rod JISG4308 SUS201 SUS201 SUS201



Stainless steel wire rod JISG4308 SUS303Se SUS303Se SUS303Se

Stainless steel wire rod JISG4308 SUS303Cu SUS303Cu SUS303Cu


Stainless steel wire rod JISG4308 SUS304L SUS304L SUS304L

Stainless steel wire rod JISG4308 SUS304N1 SUS304N1 SUS304N1

Stainless steel wire rod JISG4308 SUS304J3 SUS304J3 SUS304J3Stainless steel wire rod JISG4308 SUS305 SUS305 SUS305

Stainless steel wire rod JISG4308 SUS305J1 SUS305J1 SUS305J1

Stainless steel wire rod JISG4308 SUS309S SUS309S SUS309S

Stainless steel wire rod JISG4308 SUS310S SUS310S SUS310S


27/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Stainless steel wire rod JISG4308 SUS316L SUS316L SUS316LStainless steel wire rod JISG4308 SUS316F SUS316F SUS316F


Stainless steel wire rod JISG4308 SUS317L SUS317L SUS317L




Stainless steel wire rod JISG4308 SUSXM7 SUSXM7 SUSXM7


Stainless steel wire rod JISG4308 SUS430F SUS430F SUS430FStainless steel wire rod JISG4308 SUS434 SUS434 SUS434



Stainless steel wire rod JISG4308 SUS410F2 SUS410F2 SUS410F2




Stainless steel wire rod JISG4308 SUS420F SUS420F SUS420F

Stainless steel wire rod JISG4308 SUS420F2 SUS420F2 SUS420F2Stainless steel wire rod JISG4308 SUS431 SUS431 SUS431

Stainless steel wire rod JISG4308 SUS440C SUS440C SUS440C


Stainless steel wire JISG4309 SUS201 SUS201 SUS201


Stainless steel wire JISG4309 SUS303Se SUS303Se SUS303Se

Stainless steel wire JISG4309 SUS303Cu SUS303Cu SUS303Cu


Stainless steel wire JISG4309 SUS304L SUS304L SUS304LStainless steel wire JISG4309 SUS304N1 SUS304N1 SUS304N1

Stainless steel wire JISG4309 SUS304J3 SUS304J3 SUS304J3



Stainless steel wire JISG4309 SUS309S SUS309S SUS309S

Stainless steel wire JISG4309 SUS310S SUS310S SUS310S


Stainless steel wire JISG4309 SUS316L SUS316L SUS316L

Stainless steel wire JISG4309 SUS316F SUS316F SUS316F


Stainless steel wire JISG4309 SUS317L SUS317L SUS317L




28/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name


Stainless steel wire JISG4309 SUSXM7 SUSXM7 SUSXM7

Stainless steel wire JISG4309 SUSXM15J1 SUSXM15J1 SUSXM15J1Stainless steel wire JISG4309 SUH330 SUH330 SUH330




Stainless steel wire JISG4309 SUH446 SUH446 SUH446



Stainless steel wire JISG4309 SUS410F2 SUS410F2 SUS410F2

Stainless steel wire JISG4309 SUS416 SUS416 SUS416Stainless steel wire JISG4309 SUS420J1 SUS420J1 SUS420J1



Stainless steel wire JISG4309 SUS420F2 SUS420F2 SUS420F2

Stainless steel wire JISG4309 SUS440C SUS440C SUS440C

Stainless steel slip for springs JISG4313 SUS301-CSP SUS301-CSP SUS301-CSP

Stainless steel slip for springs JISG4313 SUS304-CSP SUS304-CSP SUS304-CSP

Stainless steel slip for springs JISG4313 SUS420J2-CSP SUS420J2-CSP SUS420J2-CSP

Stainless steel slip for springs JISG4313 SUS631-CSP SUS631-CSP SUS631-CSPStainless steel slip for springs JISG4313 SUS632J1-CSP SUS632J1-CSP SUS632J1-CSP

Stainless steel wire for springs JISG4314 SUS302 SUS302 SUS302


Stainless steel wire for springs JISG4314 SUS304N1 SUS304N1 SUS304N1


Stainless steel wire for springs JISG4314 SUS631J1 SUS631J1 SUS631J1

Stainless steel wire for cold heading JISG4315 SUS304 SUS304 SUS304

Stainless steel wire for cold heading JISG4315 SUS304L SUS304L SUS304L

Stainless steel wire for cold heading JISG4315 SUS304J3 SUS304J3 SUS304J3Stainless steel wire for cold heading JISG4315 SUS305 SUS305 SUS305

Stainless steel wire for cold heading JISG4315 SUS305J1 SUS305J1 SUS305J1


Stainless steel wire for cold heading JISG4315 SUS316L SUS316L SUS316L


Stainless steel wire for cold heading JISG4315 SUSXM7 SUSXM7 SUSXM7

Stainless steel wire for cold heading JISG4315 SUH660 SUH660 SUH660





Hot-formed stainless steel section JISG4317 SUS302 SUS302 SUS302



29/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name


Hot-formed stainless steel section JISG4317 SUS304L SUS304L SUS304L

Hot-formed stainless steel section JISG4317 SUS304N1 SUS304N1 SUS304N1Hot-formed stainless steel section JISG4317 SUS304N2 SUS304N2 SUS304N2

Hot-formed stainless steel section JISG4317 SUS304J3 SUS304J3 SUS304J3

Hot-formed stainless steel section JISG4317 SUS310S SUS310S SUS310S


Hot-formed stainless steel section JISG4317 SUS316L SUS316L SUS316L



Hot-formed stainless steel section JISG4317 SUS329J1 SUS329J1 SUS329J1

Hot-formed stainless steel section JISG4317 SUS329J3L SUS329J3L SUS329J3LHot-formed stainless steel section JISG4317 SUS329J4L SUS329J4L SUS329J4L



Cold-finished stainless steel section JISG4318 SUS302 SUS302 SUS302


Cold-finished stainless steel section JISG4318 SUS303Se SUS303Se SUS303Se

Cold-finished stainless steel section JISG4318 SUS303Cu SUS303Cu SUS303Cu


Cold-finished stainless steel section JISG4318 SUS304L SUS304L SUS304LCold-finished stainless steel section JISG4318 SUS304J3 SUS304J3 SUS304J3


Cold-finished stainless steel section JISG4318 SUS305J1 SUS305J1 SUS305J1

Cold-finished stainless steel section JISG4318 SUS309S SUS309S SUS309S

Cold-finished stainless steel section JISG4318 SUS310S SUS310S SUS310S


Cold-finished stainless steel section JISG4318 SUS316L SUS316L SUS316L

Cold-finished stainless steel section JISG4318 SUS316F SUS316F SUS316F

Cold-finished stainless steel section JISG4318 SUS321 SUS321 SUS321Cold-finished stainless steel section JISG4318 SUS347 SUS347 SUS347






Cold-finished stainless steel section JISG4318 SUS410F2 SUS410F2 SUS410F2





Cold-finished stainless steel section JISG4318 SUS420F2 SUS420F2 SUS420F2

Cold-finished stainless steel section JISG4318 SUS440C SUS440C SUS440C


30/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name


Spring steel JISG4801 SUP6 SUP6 SUP6

Spring steel JISG4801 SUP7 SUP7 SUP7Spring steel JISG4801 SUP9 SUP9 SUP9

Spring steel JISG4801 SUP9A SUP9A SUP9A


Spring steel JISG4801 SUP11A SUP11A SUP11A



Free cutting carbon steel JISG4804 SUM11 SUM11 SUM11


Free cutting carbon steel JISG4804 SUM21 SUM21 SUM21Free cutting carbon steel JISG4804 SUM22 SUM22 SUM22

Free cutting carbon steel JISG4804 SUM22L SUM22L SUM22L







Free cutting carbon steel JISG4804 SUM32 SUM32 SUM32Free cutting carbon steel JISG4804 SUM41 SUM41 SUM41



Carbon steel casting JISG5101 SC360 SC360 SC360




Carbon steel and low alloy steel JISG5111 SCC3A SCC3A SCC3A

Carbon steel and low alloy steel JISG5111 SCC3B SCC3B SCC3BCarbon steel and low alloy steel JISG5111 SCC5A SCC5A SCC5A

Carbon steel and low alloy steel JISG5111 SCC5B SCC5B SCC5B

Carbon steel and low alloy steel JISG5111 SCMn1A SCMn1A SCMn1A

Carbon steel and low alloy steel JISG5111 SCMn1B SCMn1B SCMn1B







Carbon steel and low alloy steel JISG5111 SCSiMn2A SCSiMn2A SCSiMn2A

Carbon steel and low alloy steel JISG5111 SCSiMn2B SCSiMn2B SCSiMn2B

Carbon steel and low alloy steel JISG5111 SCMnCr2A SCMnCr2A SCMnCr2A


31/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name


Carbon steel and low alloy steel JISG5111 SCMnCr2B SCMnCr2B SCMnCr2B

Carbon steel and low alloy steel JISG5111 SCMnCr3A SCMnCr3A SCMnCr3ACarbon steel and low alloy steel JISG5111 SCMnCr3B SCMnCr3B SCMnCr3B

Carbon steel and low alloy steel JISG5111 SCMnCr4A SCMnCr4A SCMnCr4A

Carbon steel and low alloy steel JISG5111 SCMnCr4B SCMnCr4B SCMnCr4B

Carbon steel and low alloy steel JISG5111 SCMnM3A SCMnM3A SCMnM3A

Carbon steel and low alloy steel JISG5111 SCMnM3B SCMnM3B SCMnM3B

Carbon steel and low alloy steel JISG5111 SCCrM1A SCCrM1A SCCrM1A

Carbon steel and low alloy steel JISG5111 SCCrM1B SCCrM1B SCCrM1B

Carbon steel and low alloy steel JISG5111 SCCrM3A SCCrM3A SCCrM3A

Carbon steel and low alloy steel JISG5111 SCCrM3B SCCrM3B SCCrM3BCarbon steel and low alloy steel JISG5111 SCMnCrM2A SCMnCrM2A SCMnCrM2A

Carbon steel and low alloy steel JISG5111 SCMnCrM2B SCMnCrM2B SCMnCrM2B

Carbon steel and low alloy steel JISG5111 SCMnCrM3A SCMnCrM3A SCMnCrM3A

Carbon steel and low alloy steel JISG5111 SCMnCrM3B SCMnCrM3B SCMnCrM3B

Carbon steel and low alloy steel JISG5111 SCNCrM2A SCNCrM2A SCNCrM2A

Carbon steel and low alloy steel JISG5111 SCNCrM2B SCNCrM2B SCNCrM2B

Gray cast iron JISG5501 FC100 FC100 FC100


Gray cast iron JISG5501 FC200 FC200 FC200Gray cast iron JISG5501 FC250 FC250 FC250



Nodular graphite cast iron JISG5502 FCD350-22 FCD350-22 FCD350-22

Nodular graphite cast iron JISG5502 FCD350-22L FCD350-22L FCD350-22L


Nodular graphite cast iron JISG5502 FCD400-18L FCD400-18L FCD400-18L


Nodular graphite cast iron JISG5502 FCD450-10 FCD450-10 FCD450-10Nodular graphite cast iron JISG5502 FCD500-7 FCD500-7 FCD500-7




Nodular graphite cast iron JISG5502 FCD400-18A FCD400-18A FCD400-18A

Nodular graphite cast iron JISG5502 FCD400-18AL FCD400-18AL FCD400-18AL




Nodular graphite cast iron JISG5503 FCAD900-4 FCAD900-4 FCAD900-4





32/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Nodular graphite cast iron JISG5504 FCD300LT FCD300LT FCD300LTMalleable cast iron JISG5705 FCMW34-04 FCMW34-04 FCMW34-04

Malleable cast iron JISG5705 FCMW35-04 FCMW35-04 FCMW35-04





Malleable cast iron JISG5705 FCMB27-05 FCMB27-05 FCMB27-05


Malleable cast iron JISG5705 FCMB31-08 FCMB31-08 FCMB31-08Malleable cast iron JISG5705 FCMB32-12 FCMB32-12 FCMB32-12



Malleable cast iron JISG5705 FCMB35-10S FCMB35-10S FCMB35-10S

Malleable cast iron JISG5705 FCMP44-06 FCMP44-06 FCMP44-06




Malleable cast iron JISG5705 FCMP54-03 FCMP54-03 FCMP54-03Malleable cast iron JISG5705 FCMP55-04 FCMP55-04 FCMP55-04






Magnesium alloy ingots for die castings JISH2222 MD1B MD1B MD1B

Magnesium alloy ingots for die castings JISH2222 MD1D MD1D MD1D

Magnesium alloy ingots for die castings JISH2222 MD2B MD2B MD2BMagnesium alloy ingots for die castings JISH2222 MD3B MD3B MD3B

Magnesium alloy ingots for die castings JISH2222 MD4 MD4 MD4



Copper JISH3100 C1020@ C1020 C1020

Copper JISH3100 C1100@ C1100 C1100

Copper JISH3100 C1201@ C1201 C1201

Copper JISH3100 C1220@ C1220 C1220

Copper JISH3100 C1221@ C1221 C1221

Copper alloy JISH3100 C1401@ C1401 C1401





33/61



Material Name

Standards

(for the

reference)

Material Code

(for the reference)

IMDS

Registration Name

(for the reference)

Raw Material Name



Copper alloy JISH3100 C2051@ C2051 C2051Copper alloy JISH3100 C2100@ C2100 C2100


































Copper alloy JISH3130 C1720@

Composition Data Sheet Shindengen

Documents

Transcript of Composition Data Sheet Shindengen