Components and Installation – Safety -Installation Equipment – … · 2015. 3. 3. ·...

Components and Installation – Safety -Installation Equipment – Intertek Semko AB -1003 ANNEX 2B Laboratory accreditation (13) 2015-02-16 2014/9 Flexible scope Limited to introduce new issues of the standards and amendments within the scope of accreditation

Standard designation SS/ SEMKO EN or HD Dop/Dow

IEC Publ Comments

Mini-Couplers for the interconnection of electrical mains supplied equipment in road vehicles

SS-EN 50 066:1992

Flat non-wirable two-pole plugs 2,5A 250V for class II-equipment

SS-EN 50075:1991/T1:2000 EN 50 075:1990/T1:2000

Cable trunking and ducting systems for electrical installations

SS-EN 50085-1:1997/A1:1998

SS-EN 50085-1:2005 Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings

SS-EN 50085-2-1:2006

Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor

SS-EN 50085-2-2, utg 1:2008

Part 2-2 Flowing mixed gas corrosion IEC 60068-2-60 missing

Service poles and services posts SS-EN 50085-2-4, utg 1:2009 EN 50085-2-4:2009

Part 2-4 Flowing mixed gas corrosion IEC 60068-2-60 missing

Conversion adapters for industrial use SS-EN 50250:2003/C1:2007 EN 50250:2002/C1:2007

Metric cable glands for electrical installations

SS-EN 50262:1999/A2:2005 EN 50262:1998/A2:2004

Cable cleats for electrical installations SS-EN 50368:2003 Miniature fuses Max test current 500A AC and

100A DC. Subcontractor used for all higher currents including short circuit tests

Part 1: Definitions and requirements SS-EN 60127-1:2006/A1:2011 EN 60127-1:2006/A1:2011

IEC 60127-1:2006 A1:2011

Supersedes EN 60127-1:1991+A1:1999+A2:2003

Part 2: Cartridge fuse-links SS-EN 60127-2:2003 / A1:2003 / A2:2010

IEC 60 127-2:2003 A1:2003 / A2:2010

Part 3: Sub-miniature fuse links SS-EN 60127-3:1996/A2:2003

IEC 60127-3:1988 / A2:2002

Part 4: Universal Modular Fuses-Links (UMF)

SS-EN 60127-4:2005/A1:2009/ A2:2013

IEC 60127-4:2005/ A1:2008/A2:2012

Part 6: Fuse-holders for miniature cartridge fuse-links

SS-EN 60127-6:1994/A1:1996 /A2:2003

IEC 60 127-6:1994 A1:1996/A2:2002

Part 7: Miniature fuse-links for special applications

SS-EN 60127-7:2013 IEC 60127-7:2013



IEC Publ Comments

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

SS-EN 60204-1:2007/A1:2009

IEC 60204-1:2005 A1:2008

Only clauses §4 – 15 Limited to products within standard IEC/EN 61400-2 for Small wind turbines.

Measuring relays and protection equipment

Part 27: Product safety requirements SS-EN 60255-27:2006 EN 60255-27:2005

IEC 60255-27:2005

Part 151: Functional requirements for over/under current protection

SS-EN 60255-151:2010 IEC 60255-151:2009

Low-voltage fuses Max test current 500A AC and 100A DC. Subcontractor used for all higher currents including short circuit tests

Part1: General requirements SS-EN 60269-1:2008/A1:2009 EN 60269-1:2007/A1:2009

IEC 60269-1:2006/ A1:2009

Supersedes EN 60269-1:1998+A1:2005 Partially supersedes EN 60269-2:1995+A1:1998+A2:2002 and EN 60269-3:1995+A1:2003

Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

SS-EN 60269-2:1995/A1:1999 /A2:2002

IEC 60269-2:1986 /A1:1995/A2:2002

Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)

SS-EN 60269-3:1995/A1:2003

IEC 60269-3:1987 /A1:2003

SS 428 05 39:2011/T1:2013 HD 60269-3:2010/A1:2013

IEC 60269-3:2010 /A1:2013

Supersedes HD 60269-3:2007

Plugs, socket-outlets and couplers for industrial purposes

Part 1: General requirements SS-EN 60309-1:1999/A1:2007 /A2:2012

IEC 60309-1:1999 /A1:2005/A2:2012

Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

SS-EN 60309-2:1999 /A1:2007/A2:2012

IEC 60309-2:1999 /A1:2005/A2:2012

1000V, 800A.

Part 4: Switched socket-outlets and connectors, with or without interlock

SS-EN 60309-4:2007/A1:2012

IEC 60309-4:2006 /A1:2012

1000V, 800A.

Appliance couplers for household and similar general purposes

Part 1: General requirements SS-EN 60320-1:2001/A1:2007

IEC 60320-1:2001 /A1:2007



IEC Publ Comments

Part 2-1: Sewing machine couplers SS-EN 60320-2-1:2001 IEC 60320-2-1:2000 Part 2-2: Interconnection couplers for household and similar equipment

SS-EN 60320-2-2:1999 EN 60320-2-2:1998

IEC 60320-2-2:1998

EN 60 320-2-2:1991 IEC 60 320-2-2:1990/A1:1994/A2:1997

Del 2-3: Apparatanslutningsdon med kapslingsklass högre än IPX0

SS-EN 60320-2-3:1999 /A1:2005 EN 60320-2-3:1998/A1:2005

IEC 60320-2-3:1998 /A1:2004

Part 2-4: Appliance couplers dependent on appliance weight for engagement

SS-EN 60320-2-4:2006 /A1:2010

IEC 60320-2-4:2005 /A1:2009

Low-voltage switchgear and control-gear assemblies

Max test current 500A AC and 100A DC. Subcontractor used for all higher currents including short circuit tests

Part 1: Type-tested and partially type-tested assemblies

SS-EN 60439-1:2004 EN 60439-1:1999

IEC 60439-1:1999

Part 2: Particular requirements for busbar trunking systems (busways)

SS-EN 60439-2:2000/A1:2005

IEC 60439-2:2000 A1:2005

Clauses 8.2.14 and 8.2.15 excluded

Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

SS-EN 60439-3:1991/A1:1994 /A2:2001/C2:2006/C3:2010 EN 60439-3:1991/C2:2005 /C3:2009

IEC 60439-3:1990 /A1:1993/A2:2001

Part 4: Particular requirements for assemblies for construction sites (ACS)

SS-EN 60439-4:2005 IEC 60439-4:2004

Part 5: Particular requirements for assemblies for power distribution in public networks

SS-EN 60439-5:2006 IEC 60439-5:2006 Clauses 8.2.3, 8.2.4.2. 8.2.9 and 8.2.11 excluded

Switches for household and similar fixed electrical installations

Part 1: General requirements SS-EN 60669-1:2000/A1:2002 /A2:2008/C1:2007/C1:2007/IS1:2009 EN 60669-1:1999/A1:2002 /A2:2008/C1:2007/IS1:2009

IEC 60 669-1:1998 /A1:1999/A2:2006



IEC Publ Comments

Part 2-1: Particular requirements - Section 1: Electronic switches

SS-EN 60669-2-1:2005 /A1:2009/A12:2010/C1:2008 EN 60669-2-1:2004 /A1:2009/A12:2010/C1:2007

IEC 60 669-2-1:2002 A1:2008

Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)

SS-EN 60669-2-2:2006

IEC 60 669-2-2:2006

Part 2-3: Particular requirements - Time-delay switches (TDS)

SS-EN 60669-2-3:2006 IEC 60669-2-3:2006

Part 2-4: Particular requirements - Isolating switches

SS-EN 60669-2-4:2005 IEC 60669-2-4:2004

Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires

SS-EN 60669-2-6:2012 IEC 60669-2-6:2012

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations

Part 1: General requirements SS-EN 60670-1:2005/A1:2013 /C1:2007/C2:2010/IS1:2009

IEC 60670-1:2002 /A1:2011

Part 21: Particular requirements for boxes and enclosures with provision for suspension means

SS-EN 60670-21:2007 IEC 60670-21:2004

Part 2-22: Particular requirements for connecting boxes and enclosures

SS-EN 60670-22:2007 IEC 60670-22:2003

Part 23: Particular requirements for floor boxes and enclosures

SS-EN 60670-23:2009 IEC 60670-23:2006

Automatic electrical controls for household and similar use

Part 1: General requirements SS-EN 60730-1:1995 /A1:1997/A2:1998/A11:1996 /A12:1996/A14:1998/A15:1998 /A16:1999/A17:2000/A18:2003 /C2:2007

IEC 60730-1:1993 A1:1994 A2:1997

Type I only. Clause H.11.12 excluded



IEC Publ Comments

Part 1: General requirements SS-EN 60730-1:2001/A1:2005 /A2:2009/A11:2002/A12:2003 /A13:2004/A14:2005/A16:2007 C1:2007/C1:2010 EN 60730-1:2000 /A12:2003/A1:2004/A13:2004/A14:2005/A15:2007/A16:2007/A17:2000/A18:2003/A2:2008

IEC 60 730-1:1999 A1:2003/A2:2007

Part 1: General requirements SS-EN 60730-1:2012 EN 60730-1:2011

IEC 60730-1:2010

Part 2-2: Particular requirements for thermal motor protectors

SS-EN 60730-2-2:2002 /A1:2006/A11:2005

IEC 60730-2-2:2001 A1:2005

Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

SS-EN 60730-2-3:2008 EN 60730-2-3:2007

IEC 60730-2-3:2006

Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

SS-EN 60730-2-4:2008 EN 60730-2-4:2007

IEC 60730-2-4:2006

Part 2-5: Particular requirements for automatic electrical burner control systems

SS-EN 60730-2-5:2002 /A1:2005/A11:2005/A2:2010

IEC 60730-2-5:2000 /A1:2004/A2:2008

Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

SS-EN 60730-2-6:2009 EN 60 730-2-6:2008

IEC 60730-2-6:2007

Part 2-7: Particular requirements for timers and time switches

SS-EN 60730-2-7:2010 /AC1:2012 EN 60730-2-7:2010/AC:2011

IEC 60730-2-7:2008

Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

SS-EN 60730-2-8:2002 /A1:2003 EN 60730-2-8:2002/A1:2003

IEC 60730-2-8:2000 /A1:2002

Part 2-9: Particular requirements for temperature sensing controls

SS-EN 60730-2-9:2011 EN 60730-2-9:2010

IEC 60730-2-9:2008

Part 2-10: Particular requirements for motor starting relays

SS-EN 60730-2-10:2008 EN 60730-2-10:2007

IEC 60730-2-10:2006

Part 2-11: Particular requirements for energy regulators (23p)

SS-EN 60730-2-11:2008 EN 60730-2-11:2008

IEC 60730-2-11:2006



IEC Publ Comments

Part 2-12: Particular requirements for electrically operated door locks

SS-EN 60730-2-12:2006 /A11:2009 EN 60730-2-12:2006/A11:2008

IEC 60730-2-12:2005

Part 2-13: Particular requirements for humidity sensing controls

SS-EN 60730-2-13:2008 EN 60730-2-13:2008

IEC 60730-2-13:2006

Part 2-14: Particular requirements for electric actuators

SS-EN 60730-2-14:1998 /A1:2001/A11:2005/A2:2009 EN 60730-2-14:1997 A1:2001/A11:2005/A2:2008

IEC 60730-2-14:1995 A1:2001/A2:2007

Part 2-15: Particular requirements for automatic electrical water level sensing controls of the float or electrode sensor type used in boiler applications

SS-EN 60730-2-15:2010 EN 60730-2-15:2010

IEC 60730-2-15:2008

Part 2-16: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications

Replaced by EN 60730-2-15

Replaced by IEC 60730-2-15

Electrical accessories - Cord sets and interconnection cord sets

SS-EN 60799:1999 EN 60799:1998

IEC 60799:1998

Plugs and socket-outlets for household and similar purposes

Part 1: General requirements SS IEC 60884-1:2004 SS 428 08 34:2004

IEC 60884-1:2002 A1:2006

Part 1: General requirements SS-IEC 60884-1:2013 SS 428 08 34:2013

IEC 60884-1:2013

Danish deviations DS 60 884-2-D1:2011 Afsnit 107-2-D1:2008 edition 5

French deviations NF C 61-314_2003+A1(2010) German deviations DIN/VDE 0620-1:2010 Part 2-1: Particular requirements for fused plugs

IEC 60884-2-1:2006

Part 2-2: Particular requirements for socket-outlets for appliances

SS 428 08 68:1999/T1:2000 IEC 60884-2-2:2006

Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

IEC 60884-2-3:2006

Part 2-4: Particular requirements for plugs and socket-outlets for SELV

IEC 60884-2-4:2007

Part 2-5: Particular requirements for ADAPTORS

IEC 60884-2-5:1995



IEC Publ Comments

Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installations

IEC 60884-2-6:1997

Part 2-7: Particular requirements for cord extension sets

SS-IEC 60884-2-7:2013 IEC 60884-2-7:2011

Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations

Max test current 500A AC and 100A DC. Subcontractor used for all higher currents including short circuit tests Tillägg av energiklassning upp till 63A (tidigare max 32A)

Part 1: Circuit-breakers for a.c. operation

SS-EN 60898-1:2003 /A1:2004/A11:2005/A12:2008 /A13:2012/C1:2004 /IS1:2008/IS2:2008/IS3:2008 /IS4:2008

IEC 60898-1:2002 A1:2002/A2:2003

Part 2: Circuit-breakers for a.c. and d.c. operation

SS-EN 60898-2:2006 IEC 60898-2:2000 A1:2003

Circuit-breakers for equipment (CBE) SS-EN 60934:2001 /A1:2007/A2:2013

IEC 60934:2000 /A1:2007/A2:2013


Low-voltage switchgear and controlgear Max test current 500A AC and 100A DC. Subcontractor used for all higher currents including short circuit tests

Part 1: General rules SS-EN 60947-1:2008/A1:2011

IEC 60947-1:2007 A1:2010

Part 2: Circuit-breakers SS-EN 60947-2:2006 /A1:2009/A2:2013

IEC 60947-2:2006 /A1:2009/A2:2013

Part 3: Switches, disconnectors, switch disconnectors and fuse-combination units

SS-EN 60947-3:2009/A1:2012

IEC 60 947-3:2008 A1:2011/C1:2012

Part 4-1: Contactors and motor-starters - Section One: Electromechanical contactors and motor-starters

SS-EN 60947-4-3:2010 /A1:2012

IEC 60947-4-1:2009 A1:2012

Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

SS-EN 60947-4-2:2012 IEC 60 947-4-2:2011 C1:2012

Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

SS-EN 60947-4-3:2000 A1:2007/A2:2012

IEC 60947-4-3:1999 C1:2000/A1:2006 A2:2011



IEC Publ Comments

Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

SS-EN 60947-5-1:2004 /A1:2009

IEC 60947-5-1:2003 A1:2009

Part 5-2: Control circuit devices and switching elements - Proximity switches

SS-EN 60947-5-2:2008 /A1:2013 EN 60947-5-2:2007/A1:2012

IEC 60947-5-2:2007 /A1:2012

Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

SS-EN 60947-5-3:2014 IEC 60947-5-3:2013

Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

SS-EN 60947-5-4:2004 IEC 60947-5-4:2002

Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

SS-EN 60947-5-5:1998 /A1:2005/A11:2013

IEC 60947-5-5:1997 A1:2005

Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

SS-EN 60947-5-8:2007 IEC 60947-5-8:2006

Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SS-EN 60947-6-2:2003 /A1:2007

IEC 60947-6-2:2002 /A1:2007

Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

SS-EN 60947-7-1:2009 IEC 60 947-7-1:2009

Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

SS-EN 60947-7-2:2009 IEC 60 947-7-2: 2009

Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks

SS-EN 60947-7-3:2010 IEC 60 947-7-3: 2009

Connecting devices for low-voltage circuits for household and similar purposes


Part 1: General requirements SS-EN 60998-1:2004 IEC 60998-1:2003 Part 2-1: Particular requirements for connecting devices as separate entities with screwtype clamping units

SS-EN 60998-2-1:2004 IEC 60998-2-1:2003

Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units

SS-EN 60998-2-2:2004 IEC 60998-2-2:2003



IEC Publ Comments

Part 2-3: Particular requirements for connecting devices as separate entities with insulation piercing clamping units

SS-EN 60998-2-3:2004 IEC 60998-2-3:2003

Part 2-4: Particular requirements for twist-on connecting devices

SS-EN 60998-2-4:2005 IEC 60998-2-4:2004

Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors

Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)

SS-EN 60999-1:2000 IEC 60999-1:1999

Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

SS-EN 60999-2:2003 IEC 60999-2:2003

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)

Part 1: General rules SS-EN 61008-1:2013 EN 61008-1:2012

IEC 61008-1:2010

Part 2-1: Applicability of the general rules to RCCBs functionally independent of line voltage

SS-EN 61008-2-1:1995 /A11:1998/C1:1999 EN 61008-2-1:1994 /A11:1998/C1:1999

IEC 61008-2-1:1990

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's

Part 1: General rules SS-EN 61009-1:2013 EN 61009-1:2012

IEC 61009-1:2010

Part 2-1: Applicability of the general rules to RCBOs functionally independent of line voltage

SS-EN 61009-2-1:1995 /A11:1998/C1:1999

IEC 61009-2-1:1991

Switches for appliances Part 1: General requirements SS-EN 61058-

1:2002/A2:2008 EN 61058-1:2002 (IEC A1 included) A2:2008

IEC 61058-1:2000 A1:2001/A2:2007

Part 2-1: Particular requirements for cord switches

SS-EN 61058-2-1:2011 IEC 61058-2-1:2010

Part 2-4: Particular requirements for independently mounted switches

SS-EN 61058-2-4:2007 EN 61058-2-4:2005

IEC 61058-2-4:1995 A1:2003



IEC Publ Comments

Part 2-5: Particular requirements for change-over selectors

SS-EN 61058-2-5:2011 IEC 61058-2-5:2010

Cable trunking and ducting systems for electrical installations

Part 1: General Requirements IEC 61084-1:1991 A1:1993

Part 2-1: Cable trunking and ducting systems for mounting on walls or ceilings

IEC 61084-2-1:1996

Part 2-2: Particular requirements – Cable trunking systems and cablie ductiong systems intended for underfloor and flushfloor installations

IEC 61084-2-2:2003

Part 2-4: Particular Requirements – Service Poles

IEC 61084-2-4:1996

Electromechanical contactors for household and similar purposes

SS-EN 61095:2009 IEC 61095:2009

Electrical accessories - Cable reels for household and similar purposes

SS-EN 61242:1997 /A1:2008/C1:2011 EN 61242:1997/A11:2004 /A12:2005/A1:2008/Cor1:2011

IEC 61242:1995 A1:2008

Live working - Voltage detectors Part 3: Two-pole low-voltage type SS-EN 61243-3:2010 IEC 61243-3:2009 Industrial cable reels SS-EN 61316:2000 IEC 61316:1999 Conduit systems for cable management Max test current 500A AC and

100A DC. Subcontractor used for all higher currents including short circuit tests

Part 1: General requirements SS-EN 61386-1:2008 IEC 61386-1:2008 Part 21: Particular requirements - Rigid conduit systems

SS-EN 61386-1:2004/A11:2011

IEC 61386-21:2002

Part 22: Particular requirements - Pliable conduit systems

SS-EN 61386-2:2004/A11:2011

IEC 61386-22:2002

Part 23: Particular requirements - Flexible conduit systems

SS-EN 61386-23:2004/A11:2011

IEC 61386-23:2002

Low-voltage switchgear and controlgear assemblies


Part 1: General rules SS-EN 61439-1:2010 /AC1:2013 SS-EN 61439-1:2012

IEC 61439-1:2009 IEC 61439-1:2011



IEC Publ Comments

Part 2: Power switchgear and controlgear assemblies

SS-EN 61439-2:2010 SS-EN 61439-2:2012

IEC 61439-2:2009 IEC 61439-2:2011

Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

SS-EN 61439-3:2012 IEC 61439-3:2012

Part 4: Particular requirements for assemblies for construction sites (ACS)

SS-EN 61439-4:2013 IEC 61439-4:2012

Part 5: Assemblies for power distribution in public networks

SS-EN 61439-5:2011 IEC 61439-5:2010

Part 6: Busbar trunking systems (busways)

SS-EN 61439-6:2012 IEC 61439-6:2012

Powertrack systems Part 1: General requirements SS-EN 61534-1:2003

SS-EN 61534-1:2011 IEC 61534-1:2003 IEC 61534-1:2011

Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

SS-EN 61534-21:2006 IEC 61534-21:2006

Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation

SS-EN 61534-22:2009 IEC 61534-22:2006

Installation couplers intended for permanent connection in fixed installations

SS-EN 61535:2009/A1:2013

IEC 61535:2009 A1:2012

For class II (max 3 kA) and class III (max 6.6 kV).

Cable management – Cable tray systems and cable ladder systems

SS-EN 61537:2007 IEC 61537:2006

Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

HD 639 S1:2002 (SS 4280884:2002) A1:2003/A2:2010 T1:2003/T2:2011

IEC 61540:1997 A1:1998

Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage power systems - Requirements and tests

SS-EN 61643-11:2013 EN 61643-11:2012

IEC 61643-11:2011

Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods

SS-EN 61643-21:2002/A1:2009 /A2:2013

IEC 61643-21:2000 /A1:2008 /A2:2012

Part 321: Specifications for avalanche breakdown diode (ABD)

SS-EN 61643-321:2002 IEC 61643-321:2001

Part 341: Specification for thyristor surge suppressors (TSS)

SS-EN 61643-341:2002 IEC 61643-341:2001

Adjustable speed electrical power drive systems



IEC Publ Comments

Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems

SS-EN 61800-1:1998 IEC 61800-1:1997

Part 5-1: Safety requirements - Electrical, thermal and energy

SS-EN 61800-5-1:2007 IEC 61800-5-1:2007

Electromechanical elementary relays Part 1: General requirements SS-EN 61810-1, utg 3:2008 IEC 61810-1:2008 Part 5: Insulation coordination SS-EN 61810-5, utg 1:1999 IEC 61810-5:1998 Part 7: Test and measurement procedures

SS-EN 61810-7, utg 1:2006 IEC 61810-7:2007

Communication networks and systems in substations

Part 3: General requirements SS-EN 61850-3:2003 EN 61850-3:2002

IEC 61850-3:2002

Connectors - Safety requirements and tests

SS-EN 61984:2009 IEC 61984:2009

Devices for the connection of luminaires for household and similar purposes

Part 1: General requirements SS-EN 61995-1:2008 IEC 61995-1:2005 Part 2: Standard sheets for DCL SS-EN 61995-2:2009 IEC 61995-2:2009 Electrical accessories Circuit-breakers and similar equipment for household use - Auxiliary contact units

SS-EN 62019:1999 A1:2003/A11:2005

IEC 62019:1999 A1:2002

Indicator light units for household and similar fixed-electrical installations

Part 1: General requirements SS-EN 62094-1:2003/A11:2003

IEC 62094:2002

Empty enclosures for low-voltage switchgear and controlgear assemblies

General requirements SS-EN 62208:2012 EN 62208:2011

IEC 62208:2011

Cable management systems - Cable ties for electrical installations

SS-EN 62275:2009

IEC 62275:2006

Lamp connectors for general use SS 428 08 31-3ed / T1:1997 See also IEC/EN 61995 Cord sets - Rewirable cord sets - Safety requirements and test methods

SS 428 08 67:1989

Boxes for eletrical wiring Single and double box for flush type accessories - Dimensions

SS 430 06 17:2006

Circular junction box - Dimensions SS 430 06 18:2007



IEC Publ Comments

Circular box for luminaires SS 430 06 19:2007 Rewireable cord sets SEMKO 107 – 1968 )

med ändring 1-4 (CEE 7)

CEE 7 1963 Mod 1 1972 Mod 2 1972 Mod 3 1974 Mod 4 1977

Latest changes are printed in extra bold type. The accreditation does not cover sampling activities. If the laboratory, regardless of this, performs the sampling by itself, then the testing is not considered to be performed under accreditation. Provtagning omfattas inte av ackrediteringen. Om laboratoriet ändå själv utför provtagning omfattas provningen inte av ackrediteringen. The accreditation does not cover opinions and interpretations. If the laboratory, regardless of this, expresses opinions and/or provides interpretations in the test report, then the testing is not considered to be performed under accreditation. Synpunkter och tolkningar omfattas inte av ackrediteringen. Om laboratoriet ändå redovisar synpunkter och tolkningar i provningsrapporten, omfattas provningen inte av ackrediteringen.

Components and Installation – Safety -Installation Equipment – … · 2015. 3. 3. ·...

Documents

Transcript of Components and Installation – Safety -Installation Equipment – … · 2015. 3. 3. ·...