COMPONEER® BRILLIANTDirect Composite Veneers

Innovative and amazingly easyrestoration of anterior teeth

2

COMPONEER BRILLIANT are polymerised, prefabricatednano-hybrid-composite enamel shells that combine theadvantages of direct composite restorations with theadvantages of lab-made veneers. This is the first perfectedsystem to allow amazingly easy restorations of anteriorteeth with customised composite shells.

For innovative and amazingly easy restoration of anterior teeth

COMPONEER® BRILLIANTThe New

Direct Composite Veneering System.

3

Advantages for the dentist:

• easy and efficient to use

• only one session required

• quality dental restorations with

excellent aesthetic results

• no impressions or laboratory necessary

• optimum customisation

(choice of colour, highlighting shape

and structure)

• economical for dentists and patients

due to high success rate and efficiency

• high added value: the solution for many

patients with reasonable investment for

the dentist

Good reasons for the patient:

• Beautiful teeth after one appointment

• high level of conservation of tooth substance

• reduced treatment stress

• customised solution

• high surface and edge quality

• more economical than indirect solutions

With COMPONEER BRILLIANT, quality aesthetic restoration of anterior teeth can be performed efficiently in just a single session. Until now the dentist could only choose between a directly modelled composite restoration or elaborate indirect veneer technology. The Direct Composite Veneering System adds a new and interesting dimension to existing treatment options and gives dentists and patients new economic per-spectives. Patients can be given a naturally aesthetic smile in just a single session, and set off smiling – with a “smile to go”.

The pre-shaped COMPONEER BRILLIANT veneers are available in different sizes and are easy to use for single-tooth reconstruction as well as complete reconstruction in the anterior region. Time-consuming forming of the anatomical shape and surface and elaborate trimming are no longer required. COMPONEER BRILLIANT can be customised to individual requirements with composite at any time.

Set off with a smile

4

Novel inner surface with micro-retentive structure for a permanent bond (24 MPa, see study "One Coat Bond SL" page 7).

From 0.3 mm veneer thickness. This allows a minimally invasive preparation.

COMPONEER BRILLIANT - Technical data:

Flexural modulus 9000 MPaFlexural strength 127 MPaWater sorption 16 µg/mm3

Water solubility 0.9 µg/mm3

X-ray opacity 2 mm AlVickers hardness 73 kg/mm2

Compressive strength 392 MPaSmallest particle size 20 nmø particle size of filler 0.6 µmFiller content by weight 80 %Filler content by volume 65 %Density 2.0 g/mm3

(Reference: internal measurements)

5

Such perfection, even our development team had to smile with pride.

An easy-to-use product. A fantastic solution. A perfected system. COMPONEER BRILLIANT, Direct Composite Veneers, are a completely new class of veneers. They are manufactured industrially from highly filled nano-hybrid-composite which ensures excellent homogeneity and stability of the enamel shells. The extremely thin veneer coatings from 0.3 mm allow a high level of conservation of hard tooth substance during preparation. The shiny and naturally designed surface adds a look of vitality to the restoration.

The novel micro-retentive inner surface increases wettabil-ity and ensures a durable bond. Special conditioning of the veneer is not necessary. All this makes COMPONEER BRILLIANT a milestone in veneer technology. A well-thought-out range of instruments, as well as comprehensive information material for dentists and patients, round off the product line. This quickly gives the user the information required to perform attractive, natural restorations effectively and economically.

For further information on sizes and measurements please go to www.componeerbrilliant.info

FDI1

Federation Dentair International · US2

Universal numbering System

Maxilla Maxilla

S S

S

M L

M

L

XL

Mandibula

FDI1 13 12 11 21 22 23

US2 6 7 8 9 10 11

FDI1 43 42 41 31 32 33

US2 27 26 25 24 23 22

FDI1 14 24

US2 5 12

6

BRILLIANT NG and Brilliant FlowThe universal nano composite is perfectly colour- matched to COMPONEER BRILLIANT. The easy choice of shades, excellent modelling properties and high resistance to dental operating lights make this composite ideal for bonding veneers. BRILLIANT FLOW with its excellent flow properties, is available for contouring and adding that final touch.

One Coat Bond SLThis Total Etch Bond is a light-curing mono-component bonding agent. As COMPONEER BRILLIANT is primarily bonded to enamel, this is the ideal choice in adhesives. Due the excellent wettability, only one application layer on COMPONEER BRILLIANT and the tooth structure is required. Strong, permanent bonding forms the basis for invisible edges and long-life perfect aesthetics.

COMPONEER HolderThe holder is a pair of specially designed holding twee-zers which considerably simplify shape corrections to COMPONEER BRILLIANT as well as the application of the bond. The interchangeable holder caps (black protective caps) protect the COMPONEER BRILLIANT.

COMPONEER PlacerAn instrument made by practising experts for expert practice: the placer is used to align and position the ve-neers correctly and without slipping.

COMPONEER Modelling Instrument MBCThe straight end of this instrument is exceptional in design and allows free rotation during treatment. The spatula end is extremely thin and sharp for cutting away excess composite.

COMPONEER Contour Guide The unique bluish transparent contour guides permit precise contour conformity and, thus, selection of the right tooth shape. A total of 36 different shapes are available: 6 per size.

7

100

75

50

25

0

150

120

90

60

30

0

30

25

20

15

0Total wear after 1,200,000 cycles (equates to 5 years in vivo)

Antagonist natural enamel

Restoration BRILLIANT NG

Natural enamel

BRILLIANT NG

Optimised abrasion resistance The abrasion resistance of BRILLIANT NG is comparable to that of natural enamel and protects the opposing cusps.

One Coat Bond SL

Strong bonding valuesOne Coat Bond SL only requires a single application step for perfect adhesion. COMPONEER BRILLIANT in combination with One Coat Bond SL demonstrates excellent adhesion, on composite, enamel and dentin. This ensures reliable and long-lasting adhesion of the restoration. The adhesive strength of COMPONEER BRILLIANT is considerably greater than that for ceramic veneers due to the special micro-retentive surface.

Three reasons to smile. Triple reliability.

(Reference: data on file)

(Reference: data on file)

COMPONEER® BRILLIANT

Testing edge seal by observing dye penetrationThe tightness of the edge seal after alternating mechanical and thermal load is outstanding. 92.5 % of all samples showed no dye penetration; 7.5 % showed only minimal discoloration on the edges. In other words, 100 % of the samples exhibited no or only minimal edge discoloration – a highly positive outcome. The adhesive retention also proved to be stress-resistant. No retention losses were seen. no

discoloration minimal

discoloration penetration up

to 1.0 mmpenetration up

to 0.5 mm penetration

> 1.0 mm

[%]

no edge discoloration – 92.5 %

minimal edge discoloration – 7.5 %

penetration up to 0.5 mm deep – 0 %

penetration up to 1.0 mm deep – 0 %

penetration > 1.0 mm deep – 0 %

µm

(Reference: data on file)

COMPONEER

BRILLIANT

Ceramic veneer One Coat Bond SL on dentine

One Coat Bond SL on enamel

Adhe

sive

stre

ngth

/ M

Pa

8

A smile for virtually all

occasions.Whether for incisor extensions, the covering of massive discolouration or the closing of diastemas, aesthetic corrections can be carried out easily and fast with COMPONEER BRILLIANT. This closes the gap between time-consuming freehand and ex-pensive invasive veneer techniques. Fractures, malposition or anatomical malformation can, of course, also be elegantly and permanently restored using the Direct Composite Veneering System. Especially in extensive reconstruction, the contralateral teeth can be efficiently set to symmetrical positions.

Clinical Indications

Treatment of caries

1. Extensive cervical and interdental caries, discolouration of enamel, and slight malposition

2. Caries treated and homogenised anterior with COMPONEER BRILLIANT

Optimisation of old restorations

1. Extensive old and insufficient restorations

2. Reconstructed function with COMPONEER BRILLIANT

Attrition, abrasion, erosion

1. Edge-to-edge occlusion with abraded and broken anterior teeth with old restoration

2. Functional and aesthetic teeth with normal overjet constructed with COMPONEER BRILLIANT

Tooth fracture

1. Loss of 1/3 of anterior tooth by fracture

2. Simplified shaping and construction with COMPONEER BRILLIANT

9

Aesthetic / cosmetic Indications

Cosmetic correction

1. Intrinsic, non-bleachable yellow discoloura-tion and slightly too short teeth

2. Brightened teeth with COMPONEER BRILLIANT

Malposition

1. Extensive malposition with crowding

2. Axially aligned correction and repositioning with COMPONEER BRILLIANT

Extending incisors

1. Slightly shortened incisal edge with moderate malposition

2. The tooth proportions are reconstructed and aligned with COMPONEER BRILLIANT

Discolouration

1. Extensive discolouration of enamel and dentine, cervical lesions

2. Restored function and aesthetics with COMPONEER BRILLIANT

Anatomical malformation

1. Unevenly shaped teeth, conical tooth, diastema and malposition

2. Alignment of teeth, also to lip, with COMPONEER BRILLIANT

Diastema

1. Diastema and anterior teeth too long

2. Gap closure and realignment with COMPONEER BRILLIANT

10

So easy to use it makes you smile.

Benefits for patients & dentists

Whether for an individual tooth or total reconstruction, COMPONEER BRILLIANT is an easy-to-use and safe concept covering a wide variety of indications. Patients benefit from permanent direct restoration treatment and dentists have new efficient treatment options.

Clinical case studies

1. Old composite veneers with insufficient edges

1. 11 with enamel fractures, demineralisation and old composite treatment

2. Removal of old composite and etching of teeth

2. Minimally invasive preparation

3. Teeth aligned with COMPONEER BRILLIANT to contours of upper and lower lip

3. Optimal brightness in spite of marked surface structure

4. Individualised characteristics in spite of contralateral symmetry of COMPONEER BRILLIANT

4. Optimal marginal adaptation at smallest layer thickness

COMPONEER® BRILLIANT

11

Properties in clinical use

COMPONEER BRILLIANT is a complete well-thought-out system. All auxiliary tools have been specially developed and matched to ensure easy and safe use.

3. The perfectly matching COMPONEER BRILLIANT is selected using the blu-ish transparent Contour Guides.

4. Rubberdam adhesion technique facilitates functional working.

8. Final check for perfect edges before removing the rubberdam.

7. The composite is distrib-uted on the tooth using the MBC modelling instru-ment. The placer is used for stress-free application of the COMPONEER BRILLIANT to its final position.

6. Careful grinding of the COMPONEER BRILLIANT to give an exact fit.

9. Situation after two weeks.

1. Initial situation: discoloured teeth, exten-sive caries, malposition, incorrect axial alignment.

2. Select enamel and dentine shade with shade guide prior to isolation, ideally under daylight lamp.

5. Prior to opening the sealed COMPONEER BRILLIANT, the shape is verified again following preparation.

6001 4224

6001 4225

12

SYSTEM KITS Syringes

COMPONEER BRILLIANT PREMIUM System Kit

60 COMPONEER BRILLIANT:

each upper Set: 11, 12, 13, 21, 22, 23

each lower Set: 31, 32, 33, 41, 42, 43

1 COMPONEER BRILLIANT Set upper S - Enamel Transparent

1 COMPONEER BRILLIANT Set upper M - Enamel Transparent

1 COMPONEER BRILLIANT Set upper L - Enamel Transparent

1 COMPONEER BRILLIANT Set upper S - Enamel Bleach

1 COMPONEER BRILLIANT Set upper M - Enamel Bleach

1 COMPONEER BRILLIANT Set upper L - Enamel Bleach

1 COMPONEER BRILLIANT Set lower S - Enamel Transparent

1 COMPONEER BRILLIANT Set lower M - Enamel Transparent

1 COMPONEER BRILLIANT Set lower S - Enamel Bleach

1 COMPONEER BRILLIANT Set lower M - Enamel Bleach

1 COMPONEER BRILLIANT Material Set*

6001 4224

COMPONEER BRILLIANT BASIC System-Kit

24 COMPONEER BRILLIANT:

each upper Set: 11, 12, 13, 21, 22, 23

1 COMPONEER BRILLIANT Set upper M - Enamel Transparent

1 COMPONEER BRILLIANT Set upper L - Enamel Transparent

1 COMPONEER BRILLIANT Set upper M - Enamel Bleach

1 COMPONEER BRILLIANT Set upper L - Enamel Bleach

1 COMPONEER BRILLIANT Material Set*

6001 4225

* COMPONEER BRILLIANT Material Set Content:

BRILLIANT NG Enamel A1/B1, A2/B2, Enamel Bleach, Transparent,

1 BRILLIANT Flow (2.3g), 1 Shade Guide COMPONEER BRILLIANT

5ml One Coat Bond SL, 2.5ml Etchant Gel S

1 MBC Modelling Instrument, 1 Holder, 10 Holder Caps, 1 Placer, 2 Placer Adapters,

10 Placer Stamps, 1 Brushholder black, 50 Brushes

COMPONEER Contour Guide, 5 sizes, 1 each size

Comprepol Plus, Cup, 2311RA/Point, 2303RA

Composhine Plus, Cup, 2411RA/ Point, 2403RA

13

COMPONEER BRILLIANT SETS AND REFILLSEnamelBleach

EnamelTransparent

COMPONEER BRILLIANT Set upper S, 6 Veneers 11, 12, 13, 21, 22, 23 6001 4131 6001 4132

COMPONEER BRILLIANT Refill upper S, 2 Veneers 1 11 6001 4133 6001 4139

12 6001 4134 6001 4140

13 6001 4135 6001 4141

21 6001 4136 6001 4142

22 6001 4137 6001 4143

23 6001 4138 6001 4144

COMPONEER BRILLIANT Set upper M, 6 Veneers: 11, 12, 13, 21, 22, 23 6001 4145 6001 4146

COMPONEER BRILLIANT Refill upper M, 2 Veneers 11 6001 4147 6001 4154

12 6001 4149 6001 4155

13 6001 4150 6001 4156

21 6001 4151 6001 4157

22 6001 4152 6001 4158

23 6001 4153 6001 4159

COMPONEER BRILLIANT Set upper L, 6 Veneers: 11, 12, 13, 21, 22, 23 6001 4160 6001 4161

COMPONEER BRILLIANT Refill upper L, 2 Veneers 11 6001 4162 6001 4168

12 6001 4163 6001 4169

13 6001 4164 6001 4170

21 6001 4165 6001 4171

22 6001 4166 6001 4172

23 6001 4167 6001 4173

COMPONEER BRILLIANT Set upper XL, 6 Veneers: 11, 12, 13, 21, 22, 23 6001 4175 6001 4176

COMPONEER BRILLIANT Refill upper XL, 2 Veneers 11 6001 4177 6001 4184

12 6001 4178 6001 4185

13 6001 4179 6001 4186

21 6001 4180 6001 4187

22 6001 4182 6001 4188

23 6001 4183 6001 4189

COMPONEER BRILLIANT upper Premolar S, 2 Veneers 14/24 6001 4402 6001 4405

COMPONEER BRILLIANT upper Premolar L, 2 Veneers 14/24 6001 4404 60014406

COMPONEER BRILLIANT Set lower S, 6 Veneers: 31, 32, 33, 41, 42, 43 6001 4190 6001 4191

COMPONEER BRILLIANT Refill lower S, 2 Veneers 31 6001 4192 6001 4198

32 6001 4193 6001 4199

33 6001 4194 6001 4200

41 6001 4195 6001 4202

42 6001 4196 6001 4203

43 6001 4197 6001 4204

COMPONEER BRILLIANT Set lower M, 6 Veneers: 31, 32, 33, 41, 42, 43 6001 4205 6001 4206

COMPONEER BRILLIANT Refill lower M, 2 Veneers 31 6001 4207 6001 4213

32 6001 4208 6001 4215

33 6001 4209 6001 4216

41 6001 4210 6001 4217

42 6001 4211 6001 4218

43 6001 4212 6001 4219

14

6001 1105

6001 1107

6001 1110

14

COMPOSITES AND BONDINGS

One Coat Bond SL, 5 ml 7430

Etchant Gel S, 2.5ml 7373

BRILLIANT NG REFILLS Syringes(each syringe contains 4.0 g; 1 syringe/pack)

Dentine Enamel

A1/B1 8951 NG 8960 NG

A2/B2 8952 NG 8961 NG

A3/D3 8953 NG 8962 NG

A3.5/B3 8954 NG 8963 NG

A4/C4 8955 NG 8976 NG

C2/C3 8956 NG 8964 NG

Bleach 8957 NG 8974 NG

Transparent 8968 NG

Shade Guide COMPONEER BRILLIANT, 1 pc. 6001 4084

BRILLIANT FLOW (1 syringe/pack, 2.3 g each)

A1/B1 7100

A2/B2 7101

A3/D3 7102

A3.5/B3 7103

A4/M5 7104

Super White 7105

Transparent 7106

FLOW Needles, 1 pack/20 pcs. 8469

INSTRUMENTS/ACCESSORIES

MBC Modelling Instrument, 1 pc. 6001 1110

Holder, 1 pc. 6001 1105

Holder Cap, 40 pcs. 6001 1106

Placer, 1 pc. 6001 1107

Placer Adapter, 5 pcs. 6001 1108

Placer Stamps, 50 pcs. 6001 1109

Brushholder black, 1 pc. 6001 1111

Brushes, 500 pcs. 6001 1112

COMPONEER Contour Guide, 7 sizes, 1 each size upper small 7000

upper medium 7001

upper large 7002

upper x-large 6001 4011

upper premolar 6001 4401

lower small 7003

lower medium 7004

Comprepol Plus, Cup, 2311RA, 5 pcs. 230 295AA

Composhine Plus, Cup, 2411RA, 5 pcs. 230 303AA

Comprepol Plus, Point, 2303RA, 5 pcs. 230 293AA

Composhine Plus, Point, 2403RA, 5 pcs. 230 301AA

SwissFlex Kit 250 095AA

15

All you need for a successful start.

DVD 6001 4357Patient brochure 6001 4420

COMPONEER® BRILLIANT Promotional Items

· Contour Guide· One Coat Bond SL· BRILLIANT NG Syringes in the shades Enamel A1/B1 and Enamel A2/B2 as well as Transparent and Enamel Bleach· BRILLIANT Flow with application needles· Various polishers· Accessories· COMPONEER Holder· COMPONEER Placer· COMPONEER Instrument

The COMPONEER® BRILLIANT Direct Composite Veneers

15

The COMPONEER® BRILLIANT A smile for immediate ordering

Everything you need for applying COMPONEER BRILLIANT is included in the compact COMPONEER BRILLIANT System Kit.

Coltène/Whaledent AGFeldwiesenstr. 20 9450 Altstätten/SwitzerlandTel. + 41 71 757 53 00Fax + 41 71 757 53 01info.ch@coltene.com 60

01 4

341

04.

14

Make your patients smile.

With COMPONEER BRILLIANT by Coltène/Whaledent. If you require further INFORMATION or wish to place an order, our sales team is always at your service.

Simply visit us at: www.COMPONEERBRILLIANT.info

Dr. Mario Besek, expert on aesthetic dentistry, Swiss Dental Center, Zurich“The new COMPONEER BRILLIANT Veneering System for the restoration of anterior teeth extends treatment options by combining the advantages of minimally invasive composite restoration and laboratory-made veneer technology. The advanced system offers patients and dentists new economical perspectives, all in just a single session.”