Complete the Final report - ndiscommission.gov.au · Complete the Final report Quick Reference...
Transcript of Complete the Final report - ndiscommission.gov.au · Complete the Final report Quick Reference...
Australian Government 0 NDIS Quality and Safeguards Commission
Complete the Final report
Quick Reference Guide – Reportable Incidents
Providers are required to submit a final report when the NDIS Commission requires additional
information on the Reportable Incident.
This guide outlines the steps for:
Accessing the final report
Submitting the final report
Attaching additional documentation
Note that there are different final report questions to accommodate different incident types.
Before getting started, some useful hints and tips are outlined below:
Tip 1 – Draft the free text sections of information into a word document and copy/paste it
across to avoid the portal from timing out. Alternatively, scroll to the bottom of the each
page and select Save as Draft at least every 25 minutes. It is a requirement of PRODA that
the portal times-out after 30 minutes of inactivity.
Tip 2 – Ensure that you that you have prepared any relevant supporting documents for
attachment in the portal. Please note that there is an attachment limit of 10MB per
document and any documents attached cannot be removed.
Tip 3 – You will need to complete all mandatory fields (marked with an *), otherwise the
system will not allow you to submit the form.
Tip 4 – Ensure that you have the right access to complete the Reportable Incidents form.
You will need to be registered as either the Provider Authorised RI Approver or the Provider
Authorised RI Notifier. Please review the Quick reference guide - getting access to NDIS
Portal to ensure you understand the responsibilities of each role and how to set up/ change
these within your organisation.
For further information/ questions, please contact the NDIS Commission Contact Centre on 1800 035 544 or by email: [email protected]
To provide feedback on the Portal, please contact the NDIS Commission via [email protected]
NDIS Quality and Safeguards Commission 1
Australian Government 0 NDIS Quality and Safeguards Commission
cnonr rdt/¥f0ftlttr:CW ~ · SWDCDl:CtCQ)1lH::c ~
Welcome to the NIDIS Commission Portal
I asks My Repo1 tabl Incidents RPport,1lile lnc1dmts
"umM1 of rads awa,ru•11«rmr, 0
Flkor. ~I .. ______ v~j ¥iii
Reportable incidents
I My ~-IO-Vi MMM &·IHIHIM ...
koorlfblr iMldcnud ~ tdmOOU:il\HSIQ lmp,MUd prrSan
► A~of•PWD ~
Final report requirements for Reportable Incidents
Please ensure that you are logged into the Portal as either the Provider Authorised RI Approver or
the Provider Authorised RI Notifier. For information on how to log in or definitions of these roles,
please see Quick reference guide - getting access to NDIS Portal
1. Click on the My Reportable Incidents tile.
Figure 1: Screenshot of My Reportable Incidents page demonstrating Step 1
2. Click View on the relevant reportable incident.
Figure 2: Screenshot of My Reportable Incidents page demonstrating Step 2
NDIS Quality and Safeguards Commission 2
Australian Government
--.. ..--■-
---·-
0
-·
NDIS Quality and Safeguards Commission
3. Review the Incident Specifics task bar on the left hand side.
The Green Ticks indicate which sections have been completed. Review these and add in any
additional information by clicking the Update button.
The Yellow Dot indicates sections that need to be completed. Click Update to complete
information required.
4. Click Final report on the Incident specific task bar.
5. Click Open to access the final report.
Figure 3: Screenshot of My Reportable Incidents page demonstrating Step 4 & 5
NDIS Quality and Safeguards Commission 3
Australian Government
----------~fl 'i'fm''
0 NDIS Quality and Safeguards Commission
-•B
6. Click on each final report sub heading from the left hand navigation bar. Click Update to begin
completing the information. Click Add to add information to the fields.
Figure 4: Screenshot of Final report page demonstrating Step 6
NDIS Quality and Safeguards Commission 4
Australian Government 0 NDIS Quality and Safeguards Commission
1ncroduct1on x
..
OU[llnt the Jll'o«:ll Ol'" ifl ¥HllpUon \.lntkfH ' C: n :•
Iii ·!il- BJU j: • •
WTIM. r>COCt«II, lii'l!Ot,tt'Uiilllion •t"HJI llr'd.c:tvlic-w:i. W'Cr lC 11:0t'dlCi:::lktd
A .. II,.- B J' U
- A - ID- B J U J: ;::
0ru«£G! C!lel'ICM ♦Od :C'°'3!'
--t1 11t.•:11 rcfi i1
111 llt. JI: :a
7. Begin completing the information fields including the mandatory fields in each section. Fields
mark with a red asterisk * are mandatory.
Click Save and close to save.
Figure 5: Screenshot of Final report - introduction demonstrating Step 7
NDIS Quality and Safeguards Commission 5
Australian Government
--------
--
0 NDIS Quality and Safeguards Commission
- ...... .....,.....,._,.....,.,,,.
- ·
-
----
-----
8. Once a sub section is completed click Mark as complete and move on to the next section.
Figure 6: Screenshot of Final report Attach supporting documents page demonstrating Step 8
9. Review the supporting documents attached to the incident at the Attach supporting documents
tab and add additional supporting documentation including your investigation report before
marking as complete.
Figure 7: Screenshot of Final report Attach supporting documents page demonstrating Step 9
NDIS Quality and Safeguards Commission 6
Australian Government 0 NDIS Quality and Safeguards Commission
Home Tasks .. Reportable 1rmdents ,.
Reportable incident
Status: Ora~
lnc;:ident Id: 4-S7M4HS0
Pro'ilider:
Client:
Attachments
Please upload any supporting document rer~ant to this incident. This can include risk assnsments, risk management plans, incident reports. investigation reports. staff rosters. medical records or police rPCords.
ihidl&:l::li·IE You currtnrly don'l hCIW! an anochmtnt llnktd 10 UJ4 rtporrabk lncldtm. 1/ you h~ ,~ rlghl oc:crn ond if lht button i5 tnob1¢. clklt. ~Add
anochtnfnr
Home Tasks • Re-portable- incidents. •
Attachments Re o tab e ii Add attachment deta ils
51
Cl
PiK-,111'.d (taiOtt:S and <:IMC
Oocumen,t ty~:*
Please Selecl
Dese:dption:
,., required
X
■
++++&
10. Click Add Attachment. Select the relevant file from your computer.
Figure 8: Screenshot of attachments page demonstrating Step 10
11. Type in the relevant Name and select the Document Type from the drop down menu. Click Save
and Close. Ensure the document name clearly conveys the information contained in the
document
Figure 9: Screenshot Attachments page demonstrating Step 11
Please note that there is an attachment limit of 10MB per document and any documents attached
cannot be removed.
NDIS Quality and Safeguards Commission 7
Australian Government
---· -
·-
0 NDIS Quality and Safeguards Commission
12. Once all the sub fields have been marked as complete, Click Submit.
Figure 10: Screenshot of Final report - submit page demonstrating Step 12
Only the Provider Authorised RI Approver can submit the Final report. If the Provider Authorised
RI Notifier is completing the Final report, they must notify the Approver within their organisation
that the report is ready for submission.
Note that the Final report is to be submitted by the due date, the time-frame is applicable to the
time it is submitted and not created or marked as complete.
NDIS Quality and Safeguards Commission 8