Complete HetNet Deployment Planning & Design · PDF filequestions such as “Where will...
-
Upload
truongdiep -
Category
Documents
-
view
220 -
download
4
Transcript of Complete HetNet Deployment Planning & Design · PDF filequestions such as “Where will...
While most cellular network operators recognize the need to densify their networks in order to �ll coverage gaps and increase capacity, pinpointing the best locations for new radio devices and analyzing the resulting impact on the entire network is extremely challenging. Answering questions such as “Where will small cells or remote radio heads have the most impact?”, “Should they be indoor or outdoor?” or “How much will they improve my macro cell network performance?” is di�cult if not impossible with traditional RF planning tools.
NetView 360® eliminates the guesswork by o�ering a comprehensive service for designing heterogeneous networks. Operators can now accurately plan a true HetNet including indoor small cells, DAS, outdoor small cells, remote radio heads and Wi-Fi. NetView 360 can also analyze changes to the macro cell network and deployment of additional spectrum. By combining innovative tra�c modeling, high-resolution RF planning,
Complete HetNet Deployment Planning & Design Service
backhaul/real estate assessment, and comparative business case analysis in a scalable manner, NetView 360 enables operators to con�dently optimize coverage, capacity and network performance.
Assessing Your NetworkPerform a High-resolution, 3D Analysis of the Existing Network1
Bene�ts:• Hotspot Identi�cation: Indoor/outdoor tra�c map at 4m resolution.• Coverage/Quality Analysis: Full indoor/outdoor 1m propagation modeling capability in 3D.• Technology Agnostic: Compatible with WCDMA/UMTS, 3G1x/EVDO, LTE, and Wi-Fi.
(Midtown Manhattan, NYC) Indoor/Outdoor Data Usage Demand (MB)
(Midtown Manhattan, NYC) Indoor/Outdoor LTE Coverage (RSRP)
Quickly quantify the types and quantities of new radios required and approximate their placement.Run analysis of multiple HetNet strategies (i.e., RRH, macro sectorization, new spectrum, small cell, DAS, etc.) to develop a long term strategy.Determine indoor small cell quantities while greatly reducing reliance on time-consuming indoor design tools.Avoid high cost of purchasing third-party clutter data and 3D building models.Identify and prioritize high-probability enterprise sales opportunities.Produce o�oad and interference analysis via data usage tra�c maps (not possible with standard “hotspot heat maps”).
•
•
•
•
•
•
Carrier Bene�ts:
NetView 360®TECHNOLOGIES
160901
TECHNOLOGIES
Page 2
Complete HetNet DesignGenerate a Comprehensive Network Densi�cation Strategy
2
Final HetNet DesignBring the Entire Radio Ecosystem Together3
Bene�ts:• Di�erentiate: Identify and quantify where outdoor solutions make more sense than indoor and vice versa.• Reduce Site Acquisition E�ort: Include real estate and backhaul options and �t the theoretical design to reality.• Holistic Analysis: Holistic analysis of all radio devices (outdoor and indoor).• Technical and Business Analysis: Pre/post analysis on technical, time-to-market, TCO, and ROI impact.
(Midtown Manhattan, NYC) Blue indoor locations shown have high tra�c, poor coverage, and high interference -- representing indoor “low-hanging fruit”
(Midtown Manhattan, NYC) Combined indoor/outdoor coverage improvement once indoor small cells are placed in the target buildings
Analysis of indoor square meters covered pre/post indoor deployment
390 N. Orange Avenue Suite 1350 Orlando, FL 32801 USA www.csky.com 1 (407) 515-9000
Report on capacity o�oad achieved per macro and capacity on-load achieved per small cell
(Midtown Manhattan, NYC) Blue areas indicate high tra�c or poor coverage areas that may be candidates for an outdoor small cell. Black lines show �ber locations that can be used to anchor an outdoor design
(Midtown Manhattan, NYC) Final Coverage map of HetNet design including macro, indoor and outdoor small cells
Prioritization: Per building prioritization by combining technical and business analysis.Holistic Analysis: Indoor and outdoor small cell and macro analysis on a common platform. Scalability: Automatic indoor designs to quantify and model indoor small cell impact.Advanced Reporting: Ability to generate highly granular reports on any attribute.
•
•
•
•
Bene�ts:
Indoor Coverage Baseline vs. Macro + Indoor Small CellsIndoor Square Meters Covered
1000
’s In
door
sq
met
ers
cove
red
5000
4000
3000
2000
1000
0-65 -70 -75 -80 -85 -90 -95 -100 -105 -110
Baseline Macro Only
PostMacro + Indoor Small Cells
RSRP(dBm)