Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
-
Upload
khan-mohammad-mahmud-hasan -
Category
Documents
-
view
221 -
download
0
Transcript of Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
1/173
BANGLADESH TECHNICAL EDUCATION BOARD
Agro Food Processing Industry Skills Council
Bangladesh
NATIONAL COMPETENCY STANDARDS
for
BAKER
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
2/173
National Certificate in Baking Revised Version A1 2
Sponsored by the TVET Reform Project
June 2010
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
3/173
National Certificate in Baking Revised Version A1 3
............................................................................................................................................. 5
............................................................ 7
...................................................................................................... 9
( 2) ....................! .
( 3) ...................................................................... 11
. ................................................... 12
................................................................................................................................................. 13
10011 .............................................................................................. 14
10021 ..................................................................................... 18
20031 ....................................................................................................... 22
20041 ................................................................................................... 25
20051 ............................................................................ 29
............................................................................................................................... 32
10061 . ...................................................................... 33
10071 . .................................... 39
10081 ...................................................................................................... 43
.................................................................................................................... 46
10091 ( ) ............................ 47
................................................................................................ 50
10101 ........................................................................................................... 51
20111 ....................................................... 54
20121 ............................................................................. 5710131 ................................................................................................................................ 60
30301 .................................................................... 63
30311 ................................................................................................................ 67
30141 , & ()
............................................................................................................................................................................................... 71
.............................................................................................. 75
10151 ........................................................................................................................ 76
20161 .................................................................................................................. 80
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
4/173
National Certificate in Baking Revised Version A1 4
20171 .......................................................................................... 84
10181 ........................................................................................................... 88
30321 ................................................. 92
30331 .......................................................................................... 97
30191 ,
() ........................................................................................................................................................................... 101
................................................................................................. 105
10201 .......................................................................................................... 106
20211 ................................................................................................................ 110
10221 ............................................................................................................................... 114
20231 .................................................................................................................... 118
30341 .................................................. 12230351 ............................................................................................................ 127
30361 .................................................................................................... 131
30241 , ()
............................................................................................................................................................................................ 135
........................................................................................... 140
10251 ..................................................................................................... 141
20261 ........................................................................................................................ 145
10271 ......................................................................................................................... 149
20281 , ................................................................................ 153
30371 ............................................................... 157
30381 .......................................................................................................... 162
30391 , ................................................................ 166
30291 ,
() .......................................................................................................................................................................... 169
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
5/173
National Certificate in Baking Revised Version A1 5
Introduction
These Competency Standards were developed by the Standards and CurriculumDevelopment Committee (SCDC) that was established under the sub-sector IndustrySkills Council (ISC) and with the assistance of the Technical and Vocational EducationReform project. This project is funded by the European Union, the International LabourOrganization and the Government of Bangladesh.
The competency standards are the foundation on which new competency basedcurriculum will be developed that responds better to the needs of industry for skilledworkers. The members of the SCDCs are primarily from industry but withrepresentatives from the Bangladesh Technical Education Board (BTEB) and theDirectorate of Technical Education (DTE), Bureau of Manpower Employment andTraining (BMET), NGO, and Private Training providers. Persons who will successfully
complete the new TVET programs based on these competency standards will receive aqualification in the new National Technical and Vocational Qualification Framework(NTVQF).
Members of the SCDC for the occupation: Baker
Mr. Md. Shafiqur Rahman Bhuiyan, Chairman SCDC
President Bangladesh Auto Biscuit & Bread Manufacturing Association(BABBMA), Dhaka
Ms. Shaheen Afroz, Consultant & Member SCDC
Head of the Department, Pastry & Production, Bangladesh Parjatan Corporation(National Tourism Organization) Dhaka
Ms. Sanjida Khan, Member SCDC
Management Consultant, Milton Biscuit & Bread Factory (Pvt.) Ltd., Park Road,Gaibandha
Mr. Suresh Chandra Mondal, Member SCDCWorkshop Superintendent Dhaka Polytechnic Institute Dhaka
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
6/173
National Certificate in Baking Revised Version A1 6
Ms. Kabari Majumder, Member SCDC
Specialist (Research), Bangladesh Technical Education Board (BTEB) Dhaka
Mr. Sajal Baran Mistry, Member SCDCKhanjahan Ali College of Science & Technology, Khulna
TVET Reform Project:
Ms. Rosemary Brown, Advisor, component-2
Dr. Md. Wazed Ali, Programme Officer, component-2
Mr. Md. Abul Kashem, Secretary, component-2
Endorsed by
Industry Skills Council
Date:
Bangladesh Technical Education Board(BTEB)
Date:
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
7/173
National Certificate in Baking Revised Version A1 7
Proposed Bangladesh NTVQF with Job Classifications
NTVQFLEVELS
EDUCATION SECTORS
Job ClassificationPre-VocationEducation
VocationalEducation
TechnicalEducation
NTVQF 6Diploma in
engineering orequivalent
Middle Level Manager/Sub Assistant Engr. etc.
NTVQF 5National SkillCertificate 5
(NSC 5)
Highly Skilled Worker /Supervisor
NTVQF 4National SkillCertificate 4
(NSC 4)Skilled Worker
NTVQF 3National SkillCertificate 3
(NSC3)Semi-Skilled Worker
NTVQF 2National SkillCertificate 2
(NSC 2)Medium-Skilled Worker
NTVQF 1National SkillCertificate 1
(NSC 1)Basic Skilled Worker
Pre-Voc 2
National Pre-Vocation
CertificateNPVC 2
Pre-Vocation Trainee
Pre-Voc 1
National Pre-Vocation
Certificate 1NPVC 1
Pre-Vocation Trainee
Note: The final version of the National Technical and Vocational QualificationFramework (NTVQF) may exclude the Pre-Vocational Sector and Pre-Voc 1 and 2Levels but they have been included to above table show how the under-privileged arecatered for by NTVQF.
The pre-vocational levels prepare the participant for training while learning programs atthe various levels of the NTVQF prepare the participant for the workforce.
At the completion of the pre-vocational programs the participants would move intotraining programs at the NTVQF levels.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
8/173
National Certificate in Baking Revised Version A1 8
Annex 1: NTVQF Level Descriptors
NTVQFLevel
Knowledge Skill Responsibility Job Class.
6 Comprehensive actualand theoretical
knowledge within aspecific study area withan awareness of thelimits of thatknowledge.
Specialised andrestricted range of
cognitive and practicalskills required toprovide leadership inthe development ofcreative solutions todefined problems
Mange a team orteams in workplace
activities where thereis unpredictablechange
Identify and designlearning programs todevelop performanceof team members
Supervisor
/ MiddleLevel
Manager/Sub
AssistantEngr. etc.
5 Very broad knowledgeof the underlying,concepts, principles,and processes in aspecific study area
Very broad range ofcognitive and practicalskills required togenerate solutions tospecific problems inone or more studyareas.
Take overallresponsibility forcompletion of tasks inwork or study
Apply pastexperiences insolving similarproblems
HighlySkilled
Worker /Supervisor
4 Broad knowledge ofthe underlying,concepts, principles,and processes in aspecific study area
Range of cognitiveand practical skillsrequired to accomplishtasks and solveproblems by selectingand applying the fullrange of methods,tools, materials andinformation
Take responsibility,within reason, forcompletion of tasks inwork or study
Apply pastexperiences insolving similarproblems
SkilledWorker
3 Moderately broadknowledge in a specificstudy area.
Basic cognitive andpractical skills requiredto use relevant
information in order tocarry out tasks and tosolve routine problemsusing simple rules andtools
Work or study undersupervision withsome autonomy
Semi-SkilledWorker
2 Basic underpinningknowledge in a specificstudy area.
Basic skills required tocarry out simple tasks
Work or study underindirect supervision ina structured context
MediumSkilledWorker
1 Elementaryunderstanding of theunderpinningknowledge in a specific
study area.
Limited range of skillsrequired to carry outsimple tasks
Work or study underdirect supervision in astructured context
BasicSkilledWorker
Pre-Voc2
Limited generalknowledge
Very limited range ofskills and use of toolsrequired to carry outsimple tasks
Work or study underdirect supervision in awell-defined,structured context.
Pre-VocationTrainee
Pre-Voc1
Extremely limitedgeneral knowledge
Minimal range of skillsrequired to carry outsimple tasks
Simple work or studyexercises, underdirect supervision in aclear, well definedstructured context
Pre-VocationTrainee
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
9/173
National Certificate in Baking Revised Version A1 9
National Competency Standards
for
National Certificate in Baking (Levels 2 & 3)
S.No.
Unit Code and TitleUoCLevel
NominalDuration(Hours)
Generic Compulsory (5 UoCs required) 200
1. GN1001A1 Use basic mathematical concepts 1 40
2. GN1002A1 Apply OSH practices in the workplace 1 30
3. GN2003A1 Use English in the workplace 2 70
4. GN2004A1 Operate in a self- directed team 2 30
5. GN2005A1 Present and apply workplace information 2 30
Sector SPECIFIC Compulsory (3 UoCs required) 130
6. FODSS1006A1 Follow quality and food safety programs 1 60
7. FODSS1007A1 Follow OSH policies and procedures in
the food industry1 40
8. FODSS1008A1 Work in the food industry 1 30
Occupation Specific Compulsory (1 UoC required) 30
09. FODSS1009A1 Interpret mixing specification for products 1 30
Sub Total for Non Job Role Specific UoCs 360
Job role Specific Electives (Complete any TWO of the following FOURElective Streams)
600
Bread (7 UoCs required) 300
10a FODBAK1010A1 Produce bread dough 1 60
11a FODBAK2011A1 Scale and mould dough for intermediate proof 2 40
12a FODBAK2012A1 Conduct final mould and final proof 2 30
13a FODBAK1013A1 Bake bread 1 30
14a FODBAK3030A1 Prepare special bread dough for baking 3 70
15a FODBAK3031A1 Bake special Bread 3 40
16a FODBAK3014A1Inspect quality, diagnose and respond toprocess and product faults (Bread)
3 30
Pastry (7 UoCs required) 300
10b FODBAK1015A1 Produce pastry 1 60
11b FODBAK2016A1 Prepare pastry fills 2 40
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
10/173
National Certificate in Baking Revised Version A1 10
12b FODBAK2017A1 Form and fill pastry products 2 30
13b FODBAK1018A1 Bake pastry products 1 30
14b FODBAK3032A1 Prepare special pastry dough and fills for baking 3 70
15b FODBAK3033A1 Bake special pastry products 3 40
16b FODBAK3019A1Inspect quality, diagnose and respond toprocess and product faults (Pastry)
3 30
Cake (8 UoCs required) 300
10c FODBAK1020A1 Produce cake batter 1 40
11c FODBAK2021A1 Produce cake fill 2 30
12c FODBAK1022A1 Bake cakes 1 30
13c FODBAK2023A1 Decorate cakes 2 60
14c FODBAK3034A1 Prepare special cake batter and fills for baking 3 40
15c FODBAK3035A1 Bake special Cakes 3 3016c FODBAK3036A1 Decorate special cakes 3 40
17cFODBAK3024A1
Inspect quality, diagnose and respond toprocess and product faults (Cake)
3 30
Biscuit (8 UoCs required) 300
10d FODBAK1025A1 Produce biscuit dough 1 60
11d FODBAK2026A1 Form biscuits 2 40
12d FODBAK1027A1 Bake biscuits 1 30
13d FODBAK2028A1 Cool, decorate and stack biscuits 2 30
14d FODBAK3037A1 Prepare special biscuit dough for baking 3 50
15d FODBAK3038A1 Bake special Biscuits 3 30
16d FODBAK3039A1 Cool, decorate and stack special Biscuits 3 30
17d FODBAK3029A1Inspect quality, diagnose and respond toprocess and product faults (Biscuit)
3 30
Grand Total Nominal Learning Hours 960
NOTE1. Two Elective streams are required. Electives could be any two of the following: Bread, Pastry,Cake or Biscuit
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
11/173
National Certificate in Baking Revised Version A1 11
Course Structure
for
National Certificate in Baking (NTVQF Level 3)(Bread/Pastry/Cake/Biscuit)*
S.No.
Unit Code and TitleUoCLeve
l
NominalDuratio
n(Hours)
Job role Specific Electives (Any TWO of the following FOUR required) 280
Bread (3 UoCs required) 140
1a FODBAK3030A1 Prepare special bread dough for baking 3 70
2a FODBAK3031A1 Bake special Bread 3 40
3aFODBAK3014A1
Inspect quality, diagnose and respond to productprocess faults (Bread)
3 30
Pastry (3 UoCs required) 140
1b FODBAK3032A1 Prepare special pastry dough and fills for baking 3 70
2b FODBAK3033A1 Bake special pastry products 3 40
3bFODCAK3019A1
Inspect quality, diagnose and respond to productprocess faults (Pastry)
3 30
Cake (4 UoCs required) 140
1c FODCAK3034A1 Prepare special cake batter and fills for baking 3 40
2c FODBAK3035A1 Bake special Cakes 3 30
3c FODBAK3036A1 Decorate special cakes 3 40
4cFODBAK3024A1
Inspect quality, diagnose & respond to productprocess faults (Cake)
3 30
Biscuit (4 UoCs required) 140
1d FODBAK3037A1 Prepare special biscuit dough for baking 3 50
2d FODBAK3038A1 Bake special Biscuits 3 30
3d FODBAK3039A1 Cool, decorate and stack special Biscuits 3 30
4dFODBAK3029A1
Inspect quality, diagnose & respond to productprocess faults (Biscuit)
3 30
Total Nominal Learning Hours 280
Any twoof the four electives is required for the award of National Certificate in Baking (Bread/Pastry/Cake/Biscuit)* (NTVQF Level 3).
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
12/173
National Certificate in Baking Revised Version A1 12
List of Abbreviations used in this Competency Standard.
General
BMET Bureau of Manpower Employment and Training
BSTI Bangladesh Standard and Testing Institution
BTEB Bangladesh Technical Education Board
DTE Directorate of Technical Education
ILO International Labour Organization
ISC Industry Skills Council
NPVC National Pre-Vocation Certificate
NTVQF National Technical and Vocational Qualification Framework
SSDC Standards and Curriculum Development Committee
TVET Technical Vocational Education and Training
UoC Unit of Competency
Occupation Specific Abbreviations
GAP Good Agricultural Practices
GMP Good Manufacturing Practices
HACCP Hazard Analysis and Critical Control PointsMSDS Material Safety Data Sheet
OSH Occupational Safety and Health
PPE Personal Protective Equipment
SOP Standard Operating Procedures
SSOP Sanitation Standard Operating Procedure
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
13/173
GENERIC UNITS
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
14/173
National Certificate in Baking Revised Version A1 14
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Code and Title GN1001A1 - Use Basic Mathematical Concepts
Nominal Hours 40 hours
Unit Descriptor This requires the knowledge and skill to apply
mathematical methods such as addition, subtraction,multiplication, and division, among others, in the routinetasks of an organisation.
Elements of Competency Performance Criteria
1. Identify calculationrequirements in the workplace
1.1 Calculation requirements are identified fromworkplace information
2. Select appropriatemathematical methods for thecalculation
2.1 Appropriate method is selected to carry out thecalculation.
3. Use basic mathematicalconcepts to calculateworkplace calculation.
3.1 Calculations are completed using appropriatemethods such as addition, subtraction, multiplicationand division.
Range of Variables
Variable Range
1.Equipment and tools mayinclude but are not limited to
Calculator
Computer with office software
2. Calculations may includebut are not limited
Addition
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
15/173
National Certificate in Baking Revised Version A1 15
Subtraction
Division
Multiplication
Ratio on any types of real values (such as whole
numbers, fractional numbers, percentages,numbers with exponents
3. Application may includebut is not limited to
Measurement
Volume
Weight
Mass
Density
Percentage
Length / Breadth / Thickness
Capacity
Time
Temperature
Budget, Pay/ Wages, Leave entitlements
Material usage
Speed
Costing
4. Workplace information mayinclude but is not limited to
Project documents Graphs
Charts
Tables
Spread sheets
Item price quotations
Equipment manuals
5. Budget may include but isnot limited to
Budget of consumables
Calculation for software components Hardware equipment
Maintenance budget of a set-up
Cost estimation
6. Methods are basicmathematical functions andmay include but are notlimited to
Addition
Subtraction
Multiplication
Division
Evidence Guide1. Critical Aspects of Evidence
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
16/173
National Certificate in Baking Revised Version A1 16
The evidence must be authentic, valid, sufficient, reliable, consistent and recentand meet the requirements of the current version of the Unit of Competency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activities coveringeach of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
Calculation requirements in the workplace
Select appropriate mathematical methods
Equipment and tools
Mathematical language, symbols and terminology
Application of units
Workplace information
Using arithmetic processes to find solutions to simple mathematical problems
3. Required Underpinning Skills
Ability to identify calculation requirements from workplace information
Ability to select appropriate mathematical methods
Ability to use appropriate technology
Ability to use mathematical language, symbols and terminology Understanding of appropriate units of measurement (such as kg, meter) and
application may include measurement, volume, weight, density, percentageetc.
Ability to include workplace information (project documents, graphs, charts,tables, spread sheets, item price quotations, equipment manuals)
Ability to use arithmetic processes to find solutions to simple mathematicalproblems
Ability to apply in the workplace.
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and healthThis should include the essential underpinning knowledge, skills and attitudes required by
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
17/173
National Certificate in Baking Revised Version A1 17
students to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board
(BTEB), the national quality assurance body, or a body with delegated authority for qualityassurance to conduct training and assessment against this unit of competency for credittowards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
18/173
National Certificate in Baking Revised Version A1 18
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title GN1002A1 - Apply OSH practices in the workplace
Nominal Hours 30 hours
Unit Descriptor This unit covers the skills and knowledge required toidentify and apply OSH in the workplace.
Elements of Competency Performance Criteria
1. Identify, control and reportOSH hazards
1.1 Immediate work area is routinely checked forOSH hazards prior to commencing and duringwork.
1.2 Hazards and unacceptable performance areidentified and corrective action is taken within thelevel of responsibility.
1.3 OSH hazards and incidents are reported toappropriate personnel according to workplaceprocedures.
1.4 Safety Signs and symbols are identified andfollowed
2. Conduct work safely 2.1 Apply OSH practices in the workplace.
2.2 Appropriate personal protective equipment (PPE)is selected and worn.
3. Follow emergencyresponse procedures
3.1 Emergency situations are identified and reported
according to workplace reporting requirements.
3.2 Emergency procedures are followed as
appropriate to the nature of the emergency and
according to workplace procedures.
3.3 Workplace procedures for dealing with accidents,fires and emergencies are followed whenever
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
19/173
National Certificate in Baking Revised Version A1 19
necessary within scope of responsibilities.
4. Maintain and improvehealth and safety in the workplace
4.1 Risks are identified and appropriate controlmeasures are implemented in the work area.
4.2 Recommendations arising from risk assessments
are implemented within level of responsibility.4.3 Opportunities for improving OSH performance are
identified and raised with relevant personnel.
4.4 Maintain safety records according to companypolicies.
Range of Variables
Variable Range
1. Work is carried out in
accordance with companyprocedures, regulatory andlicensing requirements.
Legislative requirements and industrial awards
and agreements. Legislative requirements ofoccupational health and safety Acts andregulations, including regulations and codes ofpractice relating to hazards present in theworkplace. They also include general duty ofcare under occupational health and safetylegislation and common law.
2. Company procedures mayinclude but not limited to
Job-related Standard Operating Procedures(SOPs) and OSH-specific procedures.Examples of OSH procedures include
consultation and participation, emergencyresponse, response to specific hazards, incidentinvestigation, risk assessment, reportingarrangements and issue resolution procedures
3. Workplace informationmay include but not limited to
OSH system and related documentationincluding policies and procedures, StandardOperating Procedures (SOPs), information onhazards and the work process, hazard alerts,safety signs and symbols, labels, MaterialSafety Data Sheets (MSDSs) and
manufacturers' advice.4. Hazards may include butnot limited to
OSH incidents include near misses, injuries,illnesses and property damage, noise, handlinghazardous substances, other hazards
Working with and near moving equipment/loadshifting equipment
Broken or damaged equipment or materials
5. Personal Protective
equipment may include butnot limited to
Goggles, ear muffs, ear plugs, Gloves, Clothing,
Apron, Helmet, Boots
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
20/173
National Certificate in Baking Revised Version A1 20
6. Equipment may include butnot limited to
Production machinery
Safety equipment
Emergency equipment
Tools of the trade
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activities covering
each of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
Personal protective equipment - Hand gloves, safety shoes, safety goggles,masks, apron,
Identification of tools and equipment
Hazardous events
Tools, equipment, machinery and relevant accessories. Communication
Job roles, responsibilities and compliance
3. Required Underpinning Skills
Ability to use the appropriate PPE.
Ability to identify tools and equipment.
Ability to quick response and to take safety precautions for differenthazardous situations.
Ability to operate and use tools, equipment, machinery and accessoriesproperly as per SOP (Company standards).
Ability to communicate with peers and supervisors.
Ability to apply in the workplace.
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
21/173
National Certificate in Baking Revised Version A1 21
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudes requiredby students to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competencyfor credit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of CompetencyIf you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
22/173
National Certificate in Baking Revised Version A1 22
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title GN2003A1 - Use English in the workplace
Nominal Hours 70 hours
Unit Descriptor This unit specifies the competency required to able toread, write and understand basic English in theworkplace.
Elements of Competency Performance Criteria
1. Read and understandworkplace documents inEnglish
1.1 Workplace documentsare read and understood.
1.2 Visual informationisinterpreted.
2. Write simple routineworkplace documents inEnglish
2.2 Simple routine workplace documents areprepared using key words, phrases, simplesentences and visual aids where appropriate.
2.3 Key information is written in the appropriate placesin standard forms.
3. Listen to conversation inEnglish
3.1 Active listening in English language isdemonstrated to the required workplace standard.
4. Perform conversation inEnglish
4.1 Conversation is performed in English with peers,customers and management to the requiredworkplace standard.
Range of Variables
Variable Range
1. Routine and non-routine Schedules and itineraries
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
23/173
National Certificate in Baking Revised Version A1 23
workplace documentsrequired to be read andunderstood may include butare not limited to
Agenda
Simple reports such as progress and incidentreports
Job sheets
Operational manuals Brochures and promotional material
Visual and graphic materials
Standards
OSH information
2. Visual informationmayinclude but not limited to
Signs
Maps
Diagrams
Forms Labels
Graphs
Charts
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activities coveringeach of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
Read workplace documents in English
Write simple routine workplace documents in English
Listen to conversation in English
Perform conversation in English
Interaction skills (i.e., teamwork, interpersonal skills, etc.)
Job roles, responsibilities and compliances
3. Required Underpinning Skills
Ability to read and understand workplace documents in English, usingappropriate vocabulary and grammar, and standard spelling and punctuation.
Ability to write simple routine workplace documents in English, such as:Schedules and agendas, job sheets, operational manuals and brochures, and
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
24/173
National Certificate in Baking Revised Version A1 24
promotional material.
Ability in active listening in English language is demonstrated to the requiredworkplace standard.
Ability to perform conversation in English with peers, customers and
management, to the required workplace standard. Work effectively with others:
o Listening and questioning skills
o Ability to follow simple directions
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudesrequired by students to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board
(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competency forcredit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
25/173
National Certificate in Baking Revised Version A1 25
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title GN2004A1 - Operate in a self-directed team
Nominal Hours 30 hours
Unit Descriptor This unit specifies the skills, knowledge and attitude tocommunicate and work within a team in an interactivework environment as per the workplace standard.
Elements of Competency Performance Criteria
1. Identify team goals andprocesses
1.4 Team goals and processes are identified.
1.5 Roles and responsibilities of team members areidentified
1.6 Relationships within team and with other workareas are identified
2. Communicate andcooperate with teammembers
2.4 Effective interpersonal skills are used to interactwith team members and to contribute to activitiesand objectives.
2.5 Formal and informal forms of communication are
used effectively to support team achievement.2.6 Diversityis respected and valued in team
functioning.
2.7 Views and opinions of other team members areunderstood and reflected accurately.
2.5 Workplace terminologyis used correctly to assistcommunication.
3. Work as a team member 3.1 Duties, responsibilities, authorities, objectives andtask requirements are identified and clarified withteam.
3.2 Tasks are performed in accordance with
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
26/173
National Certificate in Baking Revised Version A1 26
organizational and team requirements,specifications and workplace procedures.
3.3 Team members support other members asrequired to ensure team achieves goals andrequirements.
3.4 Agreed reporting lines are followed using standardoperating procedures
4. Solve problems as a team
member
4.1 Current and potential problems faced by team areidentified.
4.2 Procedures for avoiding and managing problemsare identified.
4.3 Problems are solved effectively and in a mannerthat supports the team.
Range of Variables
Variable Range
1. Team problem-solvingactivities including:
Identifying the problem
Consider solutions
Action
Follow-up.
2. Collaborative decision-making processes:
Consultation
Conciliation
Negotiation
Principles of equity and fairness.
3. An awareness of: Organization/companys code of conduct,complaint handling/grievance policies andprocedures
4.Critical aspects ofcompetency -assessmentrequires evidence that thecandidate:
Worked effectively within a team
Dealt with a range of communication/information at one time
Made constructive contributions in workplaceissues
Sought workplace issues effectively
Responded to workplace issues promptly
Presented information clearly and effectively inwritten form
Used appropriate sources of information
Asked appropriate questions
Provided accurate information
5. Resource ImplicationsThe following resources
Variety of Information
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
27/173
National Certificate in Baking Revised Version A1 27
MUST be provided: Communication tools
Simulated workplace
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activitiescoveringeach of the elements of competency. The evidence will alsocollectively address the performance criteria considering the range ofvariables and the required underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
Organization requirements for written and electronic communication methods
Effective verbal communication methods
3. Required Underpinning Skills
Organize information
Understand and convey intended meaning
Participate in a variety of workplace discussions
Comply with Organizations requirements in the use of written andelectronic communication methods
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudes requiredby students to develop competencies in this unit in a safe manner.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
28/173
National Certificate in Baking Revised Version A1 28
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competency
for credit towards the award of any national qualification.Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
29/173
National Certificate in Baking Revised Version A1 29
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Code and Title GN2005A1 - Present and apply workplaceinformation
Nominal Hours 30 hours
Unit Descriptor This unit covers the skills, knowledge and attitude tocommunicate and deliver up-to-date information in aninteractive work environment as per workplace standard.
Elements of Competency Performance Criteria
1. Identify informationrequirements
1.1 Information requirements in the workplace areidentified
2. Process Data 2.1 Data is collected and correlated as per prescribedmethod.
2.2 Relevant data is used as references in accordancewith the objectives of the program.
2.3 Information is applied according to workplacerequirements.
3. Analyse, interpret andorganize information
3.1 Collected information is analysed, interpret andorganize as required for workplace.
4. Apply and presentworkplace information
4.1 Findings and recommendations are summarized andpresented in a user-friendly manner.
4.2 Draft report/forms are prepared based on standardformat.
4.3 Graphs and other visual presentations are preparedto highlight analysis/interpretation of information.
4.4 Reports/forms are submitted and distributed torelevant departments/persons.
Range of Variables
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
30/173
National Certificate in Baking Revised Version A1 30
Variable Range
1. Sources of informationmay include but are notlimited to:
Daily job instructions
Specifications
Standard operating procedures
Charts
Lists
Documents
Computer data
Drawings
Sketches
Tables
Technical manuals and/or charts
Surveys Interviews
Front-end analysis
Functional analysis
2. Forms may include but arenot limited to:
Questionnaires
Profile
Accident/incident report form
Work order
Purchase order,3. Methodologies include: Qualitative
Quantitative
4. Statistical analysisincludes:
Average (mean, median, mode)
Percentage
Frequency distribution
Evidence Guide
1. Critical Aspects of Evidence The evidence must be authentic, valid, sufficient, reliable, consistent and
recent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activitiescoveringeach of the elements of competency. The evidence will alsocollectively address the performance criteria considering the range ofvariables and the required underpinning knowledge, skills and attitudes.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
31/173
National Certificate in Baking Revised Version A1 31
2. Required Underpinning Knowledge
Identify information
Identify data
Workplace standard
3. Required Underpinning Skills
Collecting information
Collecting data
Demonstrating, interpreting and/or following data sheet or instruction
Performing task as per data sheet or instruction
Keeping records and reports
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudes required bystudents to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competency forcredit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of CompetencyIf you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
32/173
SECTOR SPECIFIC UNITS
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
33/173
National Certificate in Baking Revised Version A1 33
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODSS1006A1 - Follow quality and food safetyprograms.
Nominal Hours 60 hours
Unit Descriptor This unit covers the skills, knowledge and attitudesrequired to follow food quality and safety programs inthe workplace.
Elements of Competency Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPE worn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Practice personal hygieneand good grooming standards
2.1 Personal hygiene and good grooming is practicedin line with workplace health and safetyrequirements.
2.2 Health conditions and/or illness are reported asrequired by the food safety program.
2.3 Clothing and footwear are appropriate for the foodhandling task and meets the requirements of thefood safety program.
2.4 Movement around the workplace complies with thefood safety program.
3. Follow safe food handlingand sanitation practices
3.1 Food handling requirements are identified.
3.2 Safe food handling practices are followed in linewith workplace sanitation regulations and the food
safety code.3.3 The workplace is maintained in a clean and tidy
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
34/173
National Certificate in Baking Revised Version A1 34
order to meet workplace standards.
4. Monitor quality of workoutcome
4.1 Quality requirements are identified.
4.2 Inputs are inspected to confirm capability to meetquality requirements.
4.3. Work is conducted and monitored to producerequired outcomes.
5. Identify and act on qualitydeficits and/or food safetyhazards
5.1 Work area, materials, equipment and product areroutinely checked to ensure compliance withquality and/or food safety requirements.
5.2 Processes, practices or conditions that are notconsistent with quality standards or food safetyprogram are identified.
5.2 Quality variations and/or food safety hazards arerectified or removed within the level of
responsibility and in accordance with workplaceprocedures.
5.3 Quality variations and/or food safety outside thescope of individual responsibility are reported toappropriate personnel according to workplacereporting requirements.
Range of Variables
Variable Range
1. PPE (Personal Protective
Equipment) may include but isnot limited to:
Protective clothing
Gloves
Hair net
Other PPE as per OSH requirements
2. Products/materials handledand stored can include
Raw materials
Ingredients
Consumables
Part-processed product
Finished product
Cleaning materials
3. Food handling refers to Methods of receiving and storing food
Food preparation
Cooking
Holding
Cooling
Chilling and reheating
Packaging
Disposal4. Appropriate clothing and Purpose designed overalls or uniforms
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
35/173
National Certificate in Baking Revised Version A1 35
footwear may include, but isnot limited to
Hair-nets
Beard snoods
Gloves
Overshoes
5. Breaches of food safetyprocedures may include butare not limited to:
Failure to check delivery temperatures ofpotentially hazardous chilled food;
Failure to place temperature-sensitive food intemperature-controlled storage conditionspromptly
Failure to wash hands when required
Use of cloths for unsuitable purposes
Special Notes
Food Safety Program is a written document that specifies how a business will controlall food safety hazards that may be reasonably expected to occur in all food handlingoperations of the food business. The food safety program and related procedures mustcomply with legal requirements of the Food Safety Standards and must becommunicated to all food handlers. Where no food safety program is in place, foodsafety requirements may be specified in general operating procedures.
Food safety informationmay be provided in a food safety program and/or in StandardOperating Procedures (SOPs), specifications, log sheets and written or verbalinstruction.
Appropriate clothing and footweardepends on work requirements. It should bedesigned to ensure that the body and clothing itself does not contaminate food orsurfaces likely to come into contact with food.
A food safety hazardis a biological, chemical or physical agent in, or condition of, foodthat has the potential to cause an adverse health effect. Examples are bacteria,chemical additives, plastic, glass.
Responsibility for monitoring food safety, identifying breaches in food safetyprocedures and taking corrective action relates to own tasks and responsibilities andoccurs in the context of the food safety program in the workplace.
Responsibilityfor monitoring quality relates to immediate work responsibilities and mayrequire visual inspections and checks.
Monitoring typically involves visual inspection or checks at control points. Controlpoints refer to those key points in a work process which must be monitored and
controlled. This includes food safety (critical) control points.
Respondingto out-of-specification or unacceptable outcomes at this level typically
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
36/173
National Certificate in Baking Revised Version A1 36
involves exercising judgment within clearly defined boundaries and reporting/referring toothers.
Minimum personal hygiene requirements are specified by the workplace food safetyprogram and at a minimum must at least meet legal requirements as set out in the FoodSafety Standard.
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards,including:
1. ISO 2200:2008, Food Safety management System requirement for
any organization in the food chain.
2. BDS CAC RCP 1: 2002; Code of Practice of General Principle of
Food Hygiene. (Codex CAC/RCP 1- 1969, Rev. 4-2003)
3. BDS CAC GL 18: 1998; HACCP Guideline for the application of the
Hazard Analysis Critical Control Point System
(Codex CAC/GL-18 1993)
4. BDS CAC 21: 2008; Principles for the Establishment and
Application of Microbiological Criteria for foods.
(Codex CAC/ GL 21-1997).
The graduates should be able to perform workplace related activities coveringeach of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
Personal protective equipment - hand gloves, safety shoes, safety goggles,masks, apron.
Practice personal hygiene
Rules and regulations to produce quality and safety in food
Control measures for food safety
Food safety hazards
Cleaning, sanitation and waste storage and disposal practices
Food safety procedures
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
37/173
National Certificate in Baking Revised Version A1 37
Monitor quality of work outcome
Hazardous events
Interaction skills (teamwork, networking, interpersonal skills, etc.)
Job roles, responsibilities and compliance
3. Required Underpinning Skills
Ability to use the appropriate PPE.
Ability to practise personal hygiene and good grooming in line with workplacehealth and safety requirements.
Ability to identify food rules and regulations, food grade preservatives andfood additives to meet food production safety requirements according toBSTI.
Ability to control the measures for minimizing food contamination for food
safety (for example keeping out micro-organisms, maintenance of anaerobicconditions, use of low temperatures, drying, use of chemical preservativesetc.)
Understand food safety hazards: biological, chemical or physical agents in, orconditions of, food that have the potential to cause an adverse health effect.Examples are bacteria, chemical additives, plastic, and glass.
Ability to perform waste collection, recycling, handling and disposal. This mayinclude handling/disposal requirements for different types of waste includinghazardous waste where relevant.
Ability to perform food safety procedures such as: checking delivery
temperatures of potentially hazardous chilled food, placing temperature-sensitive food in temperature-controlled storage conditions promptly, washinghands when required, use of cloths for unsuitable purposes.
Ability to perform food safety and quality responsibilities and requirementsrelating to the work area.
Ability to respond quickly and to take safety precautions for differenthazardous situations.
Ability to apply in the workplace.
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudesrequired by students to develop competencies in this unit in a safe manner.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
38/173
National Certificate in Baking Revised Version A1 38
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority for
quality assurance to conduct training and assessment against this unit of competencyfor credit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected] )
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
39/173
National Certificate in Baking Revised Version A1 39
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODSS1007A1 Follow OSH policies andprocedures in the food industry.
Nominal Hours 40 hours
Unit Descriptor This unit covers the skills and knowledge required toapply occupational safety and health (OSH) policiesand procedures in a commercial food production workarea.
Elements of Competency
Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPE worn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Conduct work safely 2.3 Workplace procedures for controlling risks arefollowed when carrying out work tasks.
3. Identify, control and reportOSH hazards
3.1 Immediate work area is routinely checked for safetyhazards prior to starting and during work.
3.2 Hazards and unacceptable performance areidentified.
3.3 Hazards and unacceptable performance arerectified or removed within the level ofresponsibility and in accordance with workplaceprocedures and OSH standards.
3.4 OSH hazards and incidents in the work area arereported to appropriate personnel according to
workplace procedures.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
40/173
National Certificate in Baking Revised Version A1 40
4. Follow emergency
procedures to respond to
a hazardous event
4.1 Emergency situations are promptly identified.
4.2 Emergency situations are reported to appropriatepersonnel according to workplace reportingrequirements.
4.3 Workplace procedures for dealing with accidents,fires and emergencies are followed whenever
necessary within scope of responsibilities.
Range of Variables
Variable Range
1. Company procedures mayinclude
Job-related SOPs (standard operating procedures) andOSH-specific procedures. Examples of OSHprocedures include consultation and participation,emergency response, response to specific hazards,incident investigation, risk assessment, reportingarrangements and issue resolution procedures.
2. Workplace informationmay include
OSH systems and related documentation includingpolicies and procedures, Standard OperatingProcedures (SOPs), information on hazards and thework process, hazard alerts, safety signs and symbols,labels, Material Safety Data Sheets (MSDSs) andmanufacturers' advice.
3. OSH incidents include Near misses, injuries, illnesses and property damage,
noise, handling hazardous substances, working withsteam and hot services/product, airborne particulates,slip, trip and fall hazards, manual handling, workingwith 240V power supply, poor ventilation, working inexposed weather conditions, working with combustiblematerials, working with and near movingequipment/load shifting equipment, broken or damagedequipment or materials.
4. Emergency equipment
may include
Medical kits/centre, eye washes, showers, fire fighting
equipment, spill kits.
5. PPE (Personal ProtectiveEquipment) may include but isnot limited to:
Protective clothing, gloves, hair net and other PPE asper OSH requirements.
Range of Variables
Variable Range
1. Range description Work is carried out in accordance with company
procedures, regulatory and licensing requirements,legislative requirements and industrial awards and
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
41/173
National Certificate in Baking Revised Version A1 41
agreements. Legislative requirements includeoccupational health and safety Acts and regulations,including regulations and codes of practice relating tohazards present in the workplace. They also includegeneral duty of care under occupational health andsafety legislation and common law.
2. Safe work procedures Relate to own work responsibilities and may includematerials handling and working with hazardous goods.
3. Hazards include but are notlimited to
Near misses, injuries and illnesses related to own job,and work area
4. Reporting of emergenciescan include
Raising an alarm and/or reporting to designatedpersonnel
5. Employee and employerrights and responsibilities
Are those established by legislation and reflected incompany policies and procedures
Special Notes
Responsibility for monitoring health and safety relates to immediate workresponsibilities.
Where safety hazards include work conditions covered by the NationalOccupational Safety and Health Commission and safety authorities, theassessment criteria and methods prescribed by these authorities must also be
met.
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards,
including: The graduates should be able to perform workplace related activities covering
each of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
3. Required Underpinning Skills
4. Required Underpinning Attitude
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
42/173
National Certificate in Baking Revised Version A1 42
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudes requiredby students to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competency
for credit towards the award of any national qualification.Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected] )
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
43/173
National Certificate in Baking Revised Version A1 43
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODSS1008A1 - Work in the food Industry
Nominal Hours 30 hours
Unit Descriptor This unit specifies the knowledge and skills required toidentify roles and responsibilities and work in the foodindustry.
Elements of Competency Performance Criteria
1. Identify job roles andresponsibilities in the foodindustry
1.1 Job roles and responsibilities in the food industryare identified.
1.2 Relationships within the food industry employeesare identified.
2. Identify and observe OSHin the food industry.
2.1 OSH in the food industry is identified and observed.
2.2 Safe work practices are followed when usingequipment in the work environment.
3. Plan work activities 3.1 Common goals, objectives and tasks are identifiedand clarified with appropriate persons.
3.2 Individual tasks are determined and agreed onaccording to workplace environment.
4. Work with others 4.1 Effective interpersonal skills are applied to interactwith others and to contribute to activities andobjectives.
4.2 Assigned tasks are performed in accordance withjob requirements, specifications and workplaceenvironment.
4.3 Work requirements are confirmed with colleagues.
Range of Variables
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
44/173
National Certificate in Baking Revised Version A1 44
Variable Range
1. OSH Personal protective equipment (PPE) Apron, Hair net,Hand gloves
2. Hazards may include Mechanical hazards, electrical hazards, fire hazard and
other work place hazards
3. Effective interpersonalskills
Basic listening and speaking skills; use of terminologyand jargon, communicating and receiving feedback,interpretation of instructions, and basic principles ofeffective communication.
4. Requirements Requirements as directed in verbal modes or written inspecification or procedures.
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards,including:
The graduates should be able to perform workplace related activities coveringeach of the elements of competency. The evidence will also collectivelyaddress the performance criteria considering the range of variables and therequired underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
3. Required Underpinning Skills
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudesrequired by students to develop competencies in this unit in a safe manner.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
45/173
National Certificate in Baking Revised Version A1 45
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competency
for credit towards the award of any national qualification.Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected] )
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
46/173
OCCUPATION SPECIFICUNITS
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
47/173
National Certificate in Baking Revised Version A1 47
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODSS1009A1 Interpret mixing specificationsfor products (only in Bakery)
Nominal Hours 30 hours
Unit Descriptor This unit specifies the competency required to interpretmixing specifications for products in commercial foodproduction.
Elements of Competency Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPE worn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Prepare for mixing 2.1 Ingredients are ready for mixing as per productionrequirements.
2.2 Equipment is checked and adjusted as perproduction requirements
3. Operate and monitor themixing process
3.1 Ingredients are delivered to the mixer in therequired quantities according to the recipespecifications.
3.2 The mixing is started and operated according toworkplace requirements.
3.3 Process is monitored as per workplacerequirements.
4. Shut down the mixingprocess
4.1 The process is shut down according to workplaceprocedures.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
48/173
National Certificate in Baking Revised Version A1 48
5. Clean and maintainequipment and productionarea.
5.1 Equipment and production area are cleaned tomeet hygiene requirements.
5.2 Maintenance requirements are identified andreported according to workplace requirements.
5.3 Waste is disposed of according to workplaceprocedures.
Range of Variables
Variable Range
1. Equipment may include butis not limited to
Mixers, sieves, weighing equipment and measurementtools
2. Ingredients As per recipe.
3. Mixing equipment Set mixing equipment to meet recipe requirements.
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Must comply with Bangladesh Standards and Testing Institutehttp://www.bsti.gov.bd/list.htmland any relevant international standards.
The graduates should be able to perform workplace related activitiescoveringeach of the elements of competency. The evidence will alsocollectively address the performance criteria considering the range ofvariables and the required underpinning knowledge, skills and attitudes.
2. Required Underpinning Knowledge
3. Required Underpinning Skills
4. Required Underpinning Attitude Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational safety and health
This should include the essential underpinning knowledge, skills and attitudes required
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
49/173
National Certificate in Baking Revised Version A1 49
by students to develop competencies in this unit in a safe manner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority for
quality assurance to conduct training and assessment against this unit of competencyfor credit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
50/173
JOB ROLE SPECIFICELECTIVES - Bread
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
51/173
National Certificate in Baking Revised Version A1 51
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODBAK1010A1 - Produce bread dough
Nominal Hours 60 hours
Unit Descriptor This unit specifies the competency required to applybread dough making principles and select equipmentand procedures for producing a range of dough typesincluding white, brown, wholemeal and grain doughs in
commercial food production.Elements of Competency Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPE worn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Prepare to mix bread
dough
2.1. Necessary ingredients are selected, measured and
weighed according to recipe to make bread dough.2.2. Equipment is confirmed ready for use.
2.3. Dough mixing equipment is set and made ready tomix the dough.
3. Produce bread dough 3.1 Ingredients are poured into the mixer.
3.2 Mixing process is operated and monitored. Thismay include monitoring the dough for consistency,feel and texture, and the other variables.
3.3 Unacceptable dough is identified and rectified.
3.4 Corrective action is taken as required to ensuredough meets requirements.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
52/173
National Certificate in Baking Revised Version A1 52
3.5 Unacceptable dough is reported.
4. Clean and maintainequipment and productionarea.
4.1 Equipment and production area are cleaned tomeet hygiene requirements.
4.2 Maintenance requirements are identified and
reported according to workplace requirements.4.3 Waste is disposed of according to workplace
procedures.
Range of Variables may include but not limited to
Variable Range
1. PPE Apron, gloves, hair net
2. Equipment Mixers, bowls, sieves, weighing equipment,measurement tools, knife, brush, scraper, scissors,refrigerator, and working tables.
3. Ingredients Flour (white, brown, and wholemeal), sugar, yeast, salt,bread improver, eggs, shortening, milk powder, oil,wheat grains, water.
4. Other variables Water temperature to meet final finished doughtemperature requirements.Dough development/bulk fermentation time.
Evidence Guide1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Compliance with BSTI (Bangladesh Standard and Testing Institution)standards www.bsti.gov.bdand relevant international standards.
Preparation of dough for minimum two types of bread that includes soft breadand crusty bread.
2. Required Underpinning Knowledge
Basic principles of bread making.
Ingredient characteristics and purpose in dough (including an understandingof flour quality and the components of wheat flour).
Settings, operating requirements and safety features of equipment used.
OHS hazards and controls.
Waste handling and cleaning procedures.
3. Required Underpinning SkillsAbility to:
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
53/173
National Certificate in Baking Revised Version A1 53
Confirm that equipment is clean and ready for operation.
Weigh, scale or meter ingredients as required.
Transfer ingredients to the mixer in the required sequence.
Set mixing equipment to meet recipe requirements.
Adjust water temperature to meet final finished dough temperaturerequirements.
Clean equipment and utensils to meet hygiene standards.
Maintain workplace records as required.
4. Required Underpinning Attitude
Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational Safety and Health (OSH)
OSH should include the essential underpinning knowledge, skills and attitudesrequired by students for developing the competencies in this unit in a safemanner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competencyfor credit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contact
the relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
54/173
National Certificate in Baking Revised Version A1 54
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODBAK2011A1 - Scale and mould dough forintermediate proof
Nominal Hours 40 hours
Unit Descriptor This unit specifies the competency required to selectthe equipment and ingredients, divide and shapedough at intermediate proof stage for commercial food
production.Elements of Competency Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPE worn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Scale and mould for
intermediate proof
2.1. Dough is scaled for different types of bread.
2.2. Dough is moulded to provide initial shape.2.3 Fruits, nuts etc. are added if required by recipe.
2.3. Errors in scaled and moulded dough are identifiedand removed or rectified, considering all factorsincluding the other variables.
3. Clean and maintainequipment and productionarea
3.1 Equipment and production area are cleaned tomeet production and hygiene requirements.
3.2 Maintenance requirements are identified andreported according to workplace requirements.
3.3 Waste is disposed of according to workplaceprocedure.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
55/173
National Certificate in Baking Revised Version A1 55
Range of Variablesmay include but not limited to
Variable Range
1. Equipment Mixers, sieves, weighing equipment, measuring tools,proofing/fermentation cabinet.
2. Personal ProtectiveEquipment (PPE)
Protective clothing, gloves, hair net and other PPE asper OSH requirements.
3. Ingredients Flour (white, brown, and wholemeal), sugar, yeast, salt,bread improver, eggs, milk powder, shortening, fruit,honey, onions, nuts, etc.
4. Other variables - The effect of dough shape/size on the final product.- Purpose and time required to allow dough to develop.
- Required characteristics of proofed dough such assize, height and appearance.
Evidence Guide
1. Critical Aspects of Evidence
The evidence must be authentic, valid, sufficient, reliable, consistent andrecent and meet the requirements of the current version of the Unit ofCompetency.
Compliance with BSTI (Bangladesh Standard and Testing Institution)standards www.bsti.gov.bdand relevant international standards.
Preparation of dough for minimum two types of bread that include straightand sponge dough.
2. Required Underpinning Knowledge
Basic principles of dough making and proofing.
Ingredient and environment characteristics and impact on dough making andproofing (including an understanding of flour quality, the components of wheatflour and weather/ temperature).
Settings, operating requirements and safety features of equipment used.
OHS hazards and controls.
Waste handling and cleaning procedures.
3. Required Underpinning Skills
Ability to
Confirm that proofing equipment and utensils are clean and ready foroperation.
Weigh, scale or meter ingredients as required.
Transfer ingredients in the required sequence, mix, divide and shape asrequired.
Set up the proofing equipment to meet recipe requirements.
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
56/173
National Certificate in Baking Revised Version A1 56
Monitor the temperature and time to meet finished dough requirements.
Clean equipment, utensils and work area to meet workplace/hygienestandards.
4. Required Underpinning Attitude Commitment to occupational health and safety
Environmental concerns
Eagerness to learn
Tidiness and timeliness
Respect for rights of peers and seniors in workplace
Communication with peers and seniors in workplace
Occupational Safety and Health (OSH)
OSH should include the essential underpinning knowledge, skills and attitudesrequired by students for developing the competencies in this unit in a safemanner.
Accreditation Requirements
Training Providers must be accredited by Bangladesh Technical Education Board(BTEB), the national quality assurance body, or a body with delegated authority forquality assurance to conduct training and assessment against this unit of competencyfor credit towards the award of any national qualification.
Accredited providers assessing against this unit of competency must meet the qualityassurance requirements set by BTEB.
Comments on this Unit of Competency
If you wish to suggest changes to the content of this unit of competency, please, contactthe relevant ISC, which is the standard setting body for this industry sector([email protected])
-
7/26/2019 Competency Standard - Agro-Food Processing - Baking ( Bread and Biscuit) - Certificate III
57/173
National Certificate in Baking Revised Version A1 57
National Technical and Vocational Qualification Framework for Bangladesh
Unit of Competency
Unit Codeand Title FODBAK2012A1 - Conduct final mould and finalproof
Nominal Hours 30 hours
Unit Descriptor This unit specifies the competency required to select
the equipment, ingredientsand procedures used tomould dough to final shape, place dough in tins or onbaking surfaces and conduct final proof in commercialfood production.
Elements of Competency Performance Criteria
1. Observe OSH practices 1.1 Housekeeping standards are maintained in theworkplace following OSH requirements.
1.2 Personal hygiene is maintained and PPEworn asper OSH requirements.
1.3 Equipment is cleaned for production and hygienerequirements.
2. Conduct final mould 2.1. Dough is moulded to provide final shape.
2.2. Dough is placed in tins or on baking trays asrequired.
2.3. Dough may be manually or mechanically mouldedor shaped using rounding