COMPANY ROLLOUT FOR MANAGEMENT OF PPE

ACTS-HSE-ROUT-00**-PPE-20120502-REV-0

DOCUMENT DETAILS

Document Title : Rollout for Management of PPE

Document Description : HSE Rollout

Prepared By : Anti-Corrosion Technical Services Limited

ACTS Ref : ACTS-HSE-PROC-00**-PPE-20110201-REV-0

REVIEW DETAILS

REV DATE ORIG CHK DC CHK APPR

0 02 MAY 12 A.

RAMSOONDAR

K. HAYNES A.C. HEWITT R. SURAJBALLY

Roll Out Presentation

To guide ACTS employees in the obtaining, training and use of Personal Protective Equipment

1. To indicate the hazards which are present on the jobsite and guide the PPE selection process accordingly

e.g.: - Use of safety glasses for flying debris 2. To ensure that all purchased PPE meet the minimum OSHA

standards for safe work e.g.: - Procurement of PPE through a reputable vendor, which

sells ANSI and/ or ISO certified equipment.

3. To ensure ACTS provide the adequate training for their employees who are required to use PPE. This includes:

- When PPE is required - What PPE is required

Body Part Protection

Eye Safety Glasses, Goggles

Face Face Shields

Head Hard Hats

Feet Safety Shoes

Hands and arms Gloves

Bodies Vests, Coveralls

Ear Earmuffs, Earplugs

- How to properly put on, adjust, wear and remove the PPE - The limitations of PPE - The proper care, maintenance, useful life and disposal of PPE

4. To verify those employees who have received and understood

the required training through a written certification that contains the name of each employee trained, the date(s) of training, and the subject of the certification

5. For the provision of PPE to ACTS employees on an as-required

basis. These PPE must include: Full Body Coverall.

Steel Tip Safety Shoes/ Boots. (ANSI Z 41 is recommended)

Safety Helmet- (ANSI Z 89.1 is recommended).

Safety Glasses/ Goggles. (ANSI Z 87.1 is recommended)

Regular and routine inspection of PPE shall be done to ensure that all equipment is safe for work prior each use

For more specialized PPE, required for specific jobs, a PPE checklist for the equipment will be used to ensure that it is in safe working condition which should be completed for each use of the equipment.

1. The employee requesting the PPE must fill out the relevant information on the form

2. Under the “On Requisition” section the Materials

Coordinator receives the form 3. The Project Execution Lead/Supervisor for the

relevant job must approve the form before issuing any PPE

4. Upon issuing of the PPE, the Materials Coordinator shall issue the PPE where it is received by the employee requesting the PPE

5. The form must be documented and stored in a designated folder

1. Why manage PPE? - To indicate the hazards which are present, and guide the PPE

selection process - To ensure that all purchased PPE meet the minimum OSHA standards

for safe work - To ensure ACTS provide the adequate training for their employees

who are required to use PPE 2. How do we manage PPE? - Through the use of the Personal Protective Equipment Requisition

Form - Through inspections prior to use of PPE - Through checklists for more specialized PPE 3. Who approves the requisition of the PPE? - Project Execution Lead/ Supervisor