Company Profile Product Range · (flow is not interrupted during partial degassing) Customer...
Transcript of Company Profile Product Range · (flow is not interrupted during partial degassing) Customer...
Company ProfileProduct Range
Individually ConfiguredPumping Systems for– Gas fraction pumping– Pressure boosting– Priming
The Pump Selection ...
System Cost Cuttings
Due to the considerable pressure heads and the small dimensions of the modular construction, theSERO Side Channel Pump is the best technological and economical solution for the delivery of lowviscose and pure liquids. In the investment and reliability (Total Life Cycle Cost) the Side ChannelPump is superior to the normal centrifugal pump due to its self priming capability.
High Self Priming Capability
Home Engineering Environmental Protection
SERO Characteristic Range
50
100
1 2 3 4 5 6 7 8 9 10 20 30 40
110 220 330 440 6 60550
Q[m3/h]
150
200
250
300
350
H[m]
n = 1450 min-1
Pump installation above the container for higheroperational safety and easier accessibility andmaintenance.
Containers, tanks are entirely emptied fromabove (environmental safety).
Efficiencycurve
1001 10
Centrifugal pumps
SERO-Side channel pumps
Pump typesnq = n x Qopt
1/2 / Hopt3/4
Specific speed nq (1/min)Ef
fici
ency
η (-
)
0,750,7
0,650,6
0,550,5
0,45
0,40,350,3
... a Sophisticated Know-How Concept
Output of Two-Phase Flows (Liquid/Gas Mixtures)
Partial gas delivery up to 50 % gas without auxiliary attachments– Our specialty: Delivery of liquids close to boiling temperature– Cavitation-proof at variable vapor pressure
(flow is not interrupted during partial degassing)
Customer Benefit: Higher operational safety guaranteestroublefree production process.
220 °C (430 °F) – Condensate
220 °C (68 °F) – Water, Acids, Carbohydrates
220 °C (32 °F)
-20 °C (-4 °F) – Liquid Gases
-40 °C (-40 °F) – Ammonia (NH3)
-60 °C (-75 °F) – Liquid Carbon Dioxide (CO2)
Optimal Solution for Low Flows and High Pressures
Energy Technology Refrigeration Engineering
220 °C
(430 °F)
High efficiency rate reduces energy costs,extremely low inlet height reduces system costs.
Economical and clean delivery and circulationof refrigerants.
Vertical, singlestage inlinepump in block design forspace-saving installation,without shaft seal (magneticcoupling) or with mechani-cal seal.
● Chemical andPetrochemical Industry
● Tank Systems Engineering● Air Conditioning and
Refrigeration Engineering
● Fuels● Solvents● Acids, Bases
max. 20 m3/h5 – 52 m16 bar-20 °C to +120 °C
GGG 40.3, 1.4581
SVG/SVM
7 m
with magnetcoupling
Pump Components
Brief TechnicalDescription
Particularities
Application
Simple design with 2 O-ringsealing. Can also beused – without changingthe modular constructionunits – as a heating orcooling jacket.
For all toxic, highly volatileor highly viscous media.In combination with theSEMA or SEMIS, this jackethousing guaranteesabsolute sealing of thepumping unit.
A specially designed jackethouses the hydraulic part ofthe pump.
Simple handling by meansof keyboard settings.Factory presettings possible.
Signaling or pumpshutdown, respectively, inthe following cases:● Dry Run● Closed Suction or Pressure
Line● Below the NPSH unit-value
Metering without sensor.The monitor is directlyconnected to the motorcircuit and can be installedoutside of the Ex zone.
Compact, space-saving IECstandard dimension motor.No extra space required forthe electronic frequencyconverter in the controlcabinet.
Variable duty points canbe controlled at differentspeeds. This ensuresexpanded pumpperformance while savingenergy.
Three-phase motor withintegrated electronicfrequency converter forcontinuously variable speedcontrol.
Ensures expansion of thepump in axial direction, inparticular with higher orlower temperatures.
Recommended for pumps inboiler/condensate systems.
Axial expansion joints, onboth sides with fixedflanges.
Dry Run and LoadMonitors
Jacket Housing Speed Control Expansion Joints
CapacityPressure HeadRated PressureTemperatureSuction HeightMaterials
Particularities
Application
Media Selection
Very well suited as a boilerfeed pump.As a 25 bar machine madefrom stainless steel, also aninteresting alternative forthe chemical industry.
● Systems and EquipmentEngineering
● Chemical Industry● for Chlorination and
Neutralization● Boiler Feeding
● Fuels, Oil● Acids, Bases, Solvents● Condensate
max. 20 m3/h5 – 250 m25 bar-20 °C to +120 °C7 mGG 25, 1.4581
For increased requirementsin home engineering,agriculture, and generalindustry.
● Home Engineering● Agriculture● General Industrial
Engineering● Marine Industry
● Water, also for Sprinklingand Irrigation
● Sae water● Acids, Bases, Solvents● Carbohydrates
max. 7,5 m3/h5 – 150 m16 bar-20 °C to +120 °C7 mGG 25, 1.4581
For heavy-duty service inthe chemical industry andprocess engineering.According to standardsDIN/EN 734
● Process Engineering● Chemical and Petro-
chemical Industry● Systems and Equipment
Engineering
● Acids, Bases● Carbohydrates● Processing Water
max. 36 m3/h5 – 350 m40 bar-40 °C to +220 °C7 mGG 25, GGG 40.3,1.4581
SOH...WSOHB...W
SFH...WSFH...WW
SRZ...WSRZ...WW
The Side Channel Pumpsfor higher operational safety and lower operating expenditure
CapacityPressure HeadRated PressureTemperatureSuction HeightMaterials
Particularities
Application
Media Selection
Pump without shaftseal by means ofmagnetic coupling.The SEMA ensuresthat hazardous sub-stances remain wherethey are supposed tobe: within the systemcycle.
● Environmental Engi-neering
● Chemical and Petro-chemical Industry
● Process and SystemsEngineering
● Aggressive andToxic Liquids
● Liquid Gases
max. 20 m3/h5 – 250 m40 bar-20 °C to +200 °C7 mGG 25, GGG 40.3,1.4581
Pump without shaftseal my means ofmagnetic coupling inblock design.Available as Multi-Function-Pump withextremely low NPSH-values or with pumpbody acc. toDIN EN 734● Environmental Engi-
neering● Chemical and petro-
chemical Industry● Process Engineering● Refrigeration Industry● Aggressive and
hazardous liquids● Refrigerants● Liquids containing
gas
max. 7,5 m3/h5 – 250 m40 bar-40 °C to +220 °C7 mGG 25, GGG 40.3,1.4581
Special pump forrefrigerants up to-60 °C. For carefreetransportation, even inthe high-pressurearea.
● Chemical Industry● Process Engineering● Refrigeration Engi-
neering
● Ammonia (NH3)● Liquid Carbon
Dioxide (CO2)● CFC substitutes
max. 20 m3/h5 – 250 m40 barto -60 °C7 mGGG 40.3, 1.4581
SEMA SEMA-Block SEMA-S...TTwith magnet coupling with magnet coupling
in block designRefrigerant pump
Combination pumpwith extremely lowNPSH values. By usingonly one shaft sealon the pressure side,transportation mediacan also be carried inthe high-vacuumarea.
● Energy Engineering● Chemical Industry● Refrigeration Engi-
neering
● Media containinggas or evaporatingquickly
● Liquid Gases● Refrigerants
max. 36 m3/h5 – 350 m40 bar-40 °C to +220 °C7 mGG 25, GGG 40.3,1.4581
SRZS...W
Proven boiler feedpump in close coupleddesign with extremelylow NPSH values.
● Boiler Feeding● Condensate
Recycling
● Condensate
max. 7,5 m3/h5 – 240 m25 bar-20 °C to +120 °C7 mGG 25
SRBS...W
for gaseous liquids in the process industryThe Multi-Function Pumps
SERO – we are at your service nearby
A member of the SERO group
Spare parts Service● On our central stock
in Meckesheim wekeep at your dispo-sal all original spareparts for the SEROstandard pumpseries.
● Delivery of spareparts for standardseries is effectedwithin one day.
● Procurement/deli-very of a selection ofspare parts for otherpump brands (outsidethe SERO range).
● Advisory assistancefor an optimal com-missioning and pro-curement of originalSERO parts.
Engineered Service/Systems Engineering● Tailor-made pump
systems in variousdesigns, adapted tothe site require-ments or ready-for-operation units outof our standardprogramme.
● Electronic pump mo-nitoring or control.
● Analysis, assessmentand optimized(re)design of pumpsystems.
● Consulting assistan-ce for a technologi-cally and economi-cally optimal solutionwith Side ChannelPumps, comparedwith centrifugalpumps.
Retrofit● Modernization of
existing pumps,components andpumping systems(e.g. through sea-ling modifications,reduction of inletheights, new arran-gements allowingremoval of coolingdevices, etc.)
● We make necessarymodifications toincrease lifetimeand to reduce lifecycle costs of yourpump units.
Assembly andStart-up● Expert-guided, at-
site pump installa-tion and start-up(75% of all dama-ges occured duringthe guaranteeperiod result fromfalse assembly orstart-up).
● We check thewhole system andoptimize the plantparameters duringthe process.
● We maintain yourpumps and lookafter them.
Training● We offer trainings
at-site or in ourMeckesheim pre-mises, helping toqualify your person-nel and update themwith all relevantknow-how.
● Trained and quali-fied personnel keepyour processes safeand minimize theoperating expendi-ture.
Repair andMaintenance● Pump users benefit
from our competent,quick and price-worthy repair ofSERO pumps and allbrands of centrifu-gal pumps.
● It is up to you to de-cide if the repair isdone at-site or in ourmodern service cen-ter in Meckesheim.
● Our Service is atyour disposal dayand night, 24 hours.
●
18941894
19291929
19591959
20032003
20052005
Max Brandenburg establishes the Berliner Pumpenfabrik AG.
Imperial patent for the side channel pump.The SERO trademark is created:
SE – selfprimingRO – rotating
Many patents follows.
The SERO Pumpenfabrik GmbH is establishedin Meckesheim by Heidelberg.
A Naturally Growing Company
Managing Director:Beate Zientek-Strietz
Prepared for the FutureWe have high engineering competence in side channel pumpingsystems.
What users can expect from us:
● First class product quality● Reliable service and availability of all spare parts● Particularly good value for your money● Competent assistance in technical and commercial matters● Top quality of offers (expert pump selection) and quick response● Extremely short delivery times, always on schedule
Founding of SMW Service und Pumpentechnik GmbHas Service Company within the SERO group.SMW offers a full „Customer Support Service“ withthe goal of an optimized Life Cycle for completepump systems.
Founding of SERO PumpSystems GmbH.SERO has positioned itself as one of the leadingmanufacturers of Side Channel Pumps.
●
●
●●
●
●
●
●
●
●
●
●
●
●
●●
●
●●
●
●● ● ●
●●
●
●●●
●●
●
REG.NR.1899
Partnership from A to Z
The world market offers an inexhaustible potential.We have creative ideas and an innovative management,and numerous international relationships with qualifiedpartners form the basis for our success.
For a list of our sales and service partners visit ourhomepage on the Internet: www.seroweb.de
● Friendly, open and partnership-oriented communication bothexternally and internally instills reliability as a core value in ouremployees.
● SERO is the only pump factory which exclusively produces sidechannel pumps. And we are good at what we are doing.
● Our proven product quality „Made in Germany“ reduces possiblemalfunctioning.
Guaranteed Reliability
SERO PumpSystems GmbHIndustriestraße 31D-74909 Meckesheimnear Heidelberg/Germany
[email protected]@[email protected]
Phone +49 62 26 92 01-0Fax +49 62 26 92 01-40
01.0
1.5/
06.E
.T