Leading manufacturer in the fi eld of surface engineering

Spray Painti ng Technology I Pumps I Compressors I Systems Engineering

COMPANY PROFILE

4

6

8

9

10

11

CONTENT

HISTORY

INTRODUCTION1SHORT OVERVIEWWHAT DOES ANEST IWATA STAND FOR?

2THE MOST IMPORTANT DEVELOPMENTS IN ANEST IWATA’S HISTORYTIMELINE FOR ANEST IWATA

THE ANEST IWATA GROUP WORLDWIDE

EMPLOYEES, HEADQUARTERS, BRANCH OFFICES, FACTORIES

3

RANGE OF APPLICATIONS FOR MAIN PRODUCTS

CAR REFINISH, WOODWORKING, INDUSTRIAL COATING

4

A CLOSER LOOK AT PRODUCTION

FROM INGOTS TO SPRAY GUNS

5

PRE ATOMIZATION TECHNOLOGY

WHAT IS SPECIAL ABOUT THIS TECHNOLOGY?THE ADVANTAGES AT A GLANCE

6

WHY ANEST IWATA?7UNDERSTANDING CUSTOMER DEMANDSA CLOSE RELATIONSHIP WITH OUR CUSTOMERS

2

3

COMPANY PROFILE

INTRODUCTION

WHAT DOES ANEST IWATA STAND FOR?

The ANEST IWATA Group is a conti nually acti ve corporati on which is oriented toward steady development. By con-sistently developing new products and leading innovati ons in technology, we always strive toward constant impro-vement and perfecti on. The ANEST IWATA group is the innovator for employing the latest applicati on processes.

There are a great variety of technical demands required of spray painti ng engineering depending on the various sectors which use the technology. Thus, there are huge diff erences in the parameters regarding the required qua-lity of coati ng equipment. Only an opti mized combinati on of the technical parameters will convince the operator and encourage him to enjoy working with the selected equipment.

ANEST IWATA knows the needs and quality demands of our customers and off ers conti nually improved product soluti ons, thus ensuring a high degree of perfecti on.

ACTIVE & NEWEST TECHNOLOGY IWATA

SHORT OVERVIEW

Company Founder Iwata Seisakusho

The ANEST IWATA Group, founded by Iwata Seisakusho in 1926, is a leading global manufacturer in the sector of coati ng tech-nology with over 1,300 employees around the world. We off er high-quality coati ng technology for the applicati on of spray ma-terials in the fi elds of car refi nish, woodworking and industrial paint fi nishing as well as airbrushing for all areas of individual applicati on around the globe.

In additi on to pumps and compressors, spray painti ng systems are among the most important products of the company.

The headquarters of the ANEST IWATA Group are located in Ja-pan. The newest products and leading technologies which are uti lized around the world are developed in our technical centers in Japan.

To focus on the German market, ANEST IWATA established AN-EST IWATA Deutschland GmbH in Leipzig. This locati on focuses on setti ng up and expanding technical sales support as well as caring for the network of dealers in Germany, Austria, and Eas-tern Europe.

3

2000

4

HISTORY

ANEST IWATA has been developing and producing fi rst-class products for the sectors of spray painti ng and coati ng technology, compressors and vacuum pumps as well as systems engineering since 1926.

The fi rst notable milestone was the development of the fi rst spray gun by iwata in 1927. The fi rst piston compres-sors followed airless spray technology and pumps. In the 1960s, the fi rst ANEST IWATA paint-spray lines and air com-pressors with two-way cooling came onto the market, followed by airbrush spray technology, screw compressors, double diaphragm pumps, the world’s fi rst painti ng robot, as well as the world’s fi rst oil-free vacuum compressors and pumps.

THE MOST IMPORTANT DEVELOPMENTS IN ANEST IWATA’S HISTORY

2HVLP Technology: The HVLP (High Volume, Low Pressure) low pressure technology atomizes paint material yet reduces mist levels by using a low internal nozzle pressure, yet higher air consumpti on.

3High T.E.C. System: High Transfer Effi ciency Control in compliance with VOC regulati ons with an effi ciency rate signifi cantly higher than 65%.

4Pre Atomizati on Technology: The Pre Atomizati on Technology with split nozzle - in contrast to the established standard round nozzle - the material is pre-atomized directly at the edge of the nozzle. The result is an even, soft and fi nely atomized spraying stream with low air incoming pressure and less air consumpti on. The spray material can be well directed and less overspray (spraying mist) results. The wet core is evenly developed with a high poten-ti al to reduce material consumpti on. Please read more about this topic on page 10.

In 1993 ANEST IWATA released the fi rst spray painti ng gun with LVLP1 (Low Volume Low Pressure) technology as a successor to the HVLP2 technology. In 1998 we launched the High T.E.C.3 (High Trans-fer Effi ciency Control) spray gun series.

In additi on to low-pressure spraying technology and low-pressure vacuum pumps and booster compressors, the product range was expanded by the product range of AirGunsa (a brand of ANEST IWATA).

Just at the turn of the millennium in the year 2000, ANEST IWATA introduced the most ground-breaking technology of all onto the market: the High-End Pre Atomizati on Techno-logy4 with split nozzle whose high performance has been recommended by paint manufac-turers worldwide and is available around the world.

In 2013 ANEST IWATA united the Pre Atomiza-ti on Technology with the HVLP Technology and released a professional spray gun which had never existed on the market before.

SU

PE

RN

OV

A S

erie

s

2003In 2013 ANEST IWATA united the Pre Atomiza-2003In 2013 ANEST IWATA united the Pre Atomiza-ti on Technology with the HVLP Technology and 2003ti on Technology with the HVLP Technology and released a professional spray gun which had 2003released a professional spray gun which had never existed on the market before. 2003never existed on the market before.

Notes:

1993

1993

1998

2000

2013

2013

1LVLP Technology: The LVLP (Low Volume, Low Pressure) low pressure tech-nology atomizes paint material yet reduces mist levels with a low internal nozzle pressure and a low consumpti on of air. That means the air require-ment is signifi cantly lower than in the HVLP method.

TIMELINE FOR ANEST IWATA

5

Founding of company by Iwata Seisakusho in Japan

First spray gun developed by iwata

First iwata piston compressors

First airless technology

First paint spray linesConstructi on of technical center in Japan

First air compressors (two-way cooling)

iwata airbrush spray gunsListed on stock market

Screw compressors

Double diaphragm pumps

World’s fi rst oil-free vacuum compressors

Release of LVLP1 Low Pressure Spray Guns

World’s fi rst oil-free compressors

iwata changes its name to ANEST IWATA

AirGunsa Spray Guns (brand of ANEST IWATA)

Release of High T.E.C.3 Spray Guns

Release of Pre Atomizati on Technology4 with split nozzle

High-vacuum devices

Nitrogen generators

Booster compressors

WS-400 Supernova Spray Gun with Pre Atomizati on Technology4

World’s fi rst oil-free booster compressors

WS-400 evo Spray Gun with Pre Atomizati on Technology4

LS-400 entech Spray Gun with Pre Atomizati on Technology4 and HVLP

1926

1927

1928

1959

1962

1969

1973

1977

1987

1991

1993

1995

1996

1997

1998

2000

2001

2002

2004

2009

2010

2012

2013

becomes

ACTIVE & NEWEST TECHNOLOGY IWATA

change name:

1996

1996

Founding of company by Iwata Seisakusho in JapanFounding of company by Iwata Seisakusho in Japan

First spray gun developed by iwata

First iwata piston compressors

First airless technology

First paint spray linesConstructi on of technical center in JapanConstructi on of technical center in Japan

First air compressors (two-way cooling)

iwata airbrush spray gunsListed on stock market

Double diaphragm pumps

World’s fi rst oil-free vacuum compressors

Low Pressure Spray Guns

World’s fi rst oil-free compressors

iwata changes its name to ANEST IWATA

change name:

1996

1996

1927

1969

THE ANEST IWATA GROUP WORLDWIDE

Sweden

England

Germany

France

Spain

Italy

6

India

United Arab

Emirates

China

Russia

ANEST IWATA EUROPE

Leipzig

ANEST IWATA EuropeANEST IWATA ItalyTurin, Italy

ANEST IWATA GermanyLeipzig, Germany

AIR GUNSA s.r.l.Cardano al Campo, Italy

ANEST IWATA U.K.St. Neots, England

ANEST IWATA FranceSaint Quenti n Fallavier, France

ANEST IWATA SkandinaviaParti lle, Sweden

ANEST IWATA IbericaBadalona, Spain

1 HeadquartersYokohama/Japan

610 in Japan

709 in other countries,112 of those in Europe

EMPLOYEES

HEADQUARTERS

55 branches around the world,6 of those in Europe(ANEST IWATA EUROPE)plus AirGunsa (Italy)

BRANCHES

Over 1,300 employees, headquarters in Japan, 3 factories, 55 branches worldwide

South Africa

Brazil

America

China

South Korea

JAPAN

Taiwan

Vietnam

Thailand

Indonesia

Myanmar

Australia

Over 1,300 employees, headquarters in Japan, 3 factories, 55 branches worldwide

Tokio

Yokohama

Headquarters

FACTORIES 3 Factories

AIR GUNSA s.r.l.Cardano al Campo, Italy

ANEST IWATA Corporati onFukushima, Japan

ANEST IWATA Corporati onAkita, Japan

7

8

AREAS OF APPLICATION FOR MAIN PRODUCTS

CAR REFINISH

Clearcoat I Basecoat I Fillercoat I Sprayfi ller I Smart Repair & Spot Repair

ANEST IWATA off ers high quality coati ng technology for the applicati on of spray materials in the car refi nish, wood-working and industrial coati ngs sector as well as for all individual areas of applicati on. ANEST IWATA off ers professi-onal and innovati ve soluti ons for coati ng technology in all fi elds of applicati on.

WOODWORKING

Staining I Priming I Stripping I Pati nati ng I Final Coati ng

INDUSTRIAL COATINGS

Records I Releasing agents I Glass I Plasti c I Metal I Adhesives I Rubber I Ceramics

A CLOSER LOOK AT PRODUCTION

FROM INGOTS TO SPRAY GUNS

The ANEST IWATA factory in Akita was established in 1972. It is one of the factories in which the ANEST IWATA su-perior spray gun models are manufactured.

1 2 3

4 5 6

9

Spray gun bodies are manufactured out of aluminum ingots1

The molten metal is injected into the mold and pressed.2

The de-burred spray gun bodies are furnished with threads and drill holes.3

Air cap, material needle and nozzle. ANEST IWATA know-how.4

Spray gun assembly with a high degree of manual work. 5

Inspecti on of the spray patt ern with coati ng material.6

10

WHAT IS SPECIAL ABOUT THIS TECHNOLOGY?

With the Pre Atomizing Technology with split nozzle - in contrast to the conventi onal round nozzle - the material is pre-atomized directly at the outer edge of the nozzle.

A DIFFERENT TECHNOLOGY: PRE ATOMIZATION TECHNOLOGY

SPLIT NOZZLE

ROUND NOZZLE

0,05 bar 0,1 bar 0,2 bar 0,3 bar

THE ADVANTAGES AT A GLANCE

Very fi ne atomizati on with low inlet air pressure

Less air consumpti on

Soft spray patt ern for easy operati on

Signifi cantly less overspray

Very high material transference due to large, even, fl at spraying core

High spray painti ng safety

The results in an even, soft and fi nely atomized spray stream with low inlet air pressure and low air consumpti on. The spray material is applied in a targeted fashion with a low amount of overspray. The wet core is evenly characterized and exhibits a high potenti al to save on ma-terial usage.

split nozzle

round nozzle

WHY ANEST IWATA?

UNDERSTANDING OUR CUSTOMER DEMANDS

A CLOSE RELATIONSHIP WITH OUR CUSTOMERS

ANEST IWATA has accepted the responsibility of taking care of our customer base personally. That means we maintain close communicati on with our customers and thus keep in direct contact with them.

Practi cal demonstrati ons and our own direct customer care on site are extremely important to us as a corporati on.

ANEST IWATA off ers fast, individual service and pays parti cular att enti on to the emoti ons and feelings of our products’ users.

RANGE OF PRODUCTS

Customers from diff erent sectors and areas of applicati on make a great variety of demands on coati ng technology. In day-to-day work, very diff erent parameters with respect to the quality of painti ng equipment come into play. Only an opti mized combinati on of applicati on parameters will convince the customer and allow him to enjoy wor-king with the selected equipment.

ANEST IWATA can supply you with precision spray guns which are perfectly tailored to your applicati ons and which will convince you in practi ce with their superior performance in fulfi lling the applicati on specifi cati ons of coati ng technology.

For the European market, ANEST IWATA off ers a range of products specifi cally tailored to diff erent areas of applica-ti on. This enables the customer to select products more easily and serves as a conti nuous common thread for the operator in each area of applicati on. This common thread creates security and routi ne when using our products and earns the trust of users regarding the brand ANEST IWATA.

11

CAR REFINISH WOOD

AIRBRUSH

COMPRESSORS SYSTEMS ENGINEERING

INDUSTRY

split nozzle

PROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALSPROFESSIONALS paint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint withpaint with

source: www.google.com/maps; June 2014

A14

A38

A9

AirportLeipzig/Halle

GERMAN BRANCH

ANEST IWATA Corporati on3176, Shinyoshida-cho, Kohoko-ku J-223 YokohamaJapanwww.anest-iwata.co.jp

ANEST IWATA Deutschland GmbHMommsenstrasse 5D-04329 LeipzigGermanyTel. +49 341 241 443 - 0Fax +49 341 252 559 - 5

info@anest-iwata.dewww.anest-iwata.de

August 2014Errors and technical alterati ons reserved.

CONTACT

www.facebook.com/ANESTIWATADeutschland

Exit Leipzig Nord-OstA14

A14LeipzigLeipzig