The Company Presentation February, 2011 The Company Presentation 2011.
COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that...
Transcript of COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that...
![Page 1: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/1.jpg)
1
EUROMOLDCOMPANY PRESENTATION
While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold reserves the right to alter or modify the characteristics of its products described in this catalogue as standards and technology evolve.
EUROMOLDEuromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution. Euromold provides a complete range of accessories for underground cables: premoulded EPDM rubber connectors for cables and epoxy bushings for transformers and switchgear, as well as a large range of cold-shrinkable terminations and joints from 12 to 42 kV.Euromold is also the manufacturer of electrical components for the high voltage accessories of the Nexans group.
ISO 9001 CertificateSince 1992, Euromold’s commitment to quality is demonstrated by its ISO 9001 certification.
Laboratory accreditationSince June 2000, Euromold’s independent ELAB laboratory obtained the BELAC accreditation no.144-TEST conform with the European standards for laboratories ISO 17025 for electrical testing of low and medium voltage cable accessories according to the international standards HD 623 and HD 629.
International standardsAll our products meet the international standards like CENELEC HD 629, CENELEC EN 50180, IEC 60137, IEEE 386 & 404… or country specifications. Official certificates (CESI, KEMA, ATEX…) prove the conformity of our products. Long duration tests of existing or new products are continuously performed in our test fields.
![Page 2: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/2.jpg)
2
01/2
011
![Page 3: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/3.jpg)
3
01/2
011
JOINTS
Table of contents12CSJ - single core straight joint24CSJ - single core straight joint24CSJ-M - single core straight joint24CSJ-S - single core straight joint36CSJ - single core straight joint36CSSM - single core straight jointTT-12CSJ - three core straight jointTT-24CSJ - three core straight jointTS-12HTJ - hybrid transition jointTS-24HTJ - hybrid transition joint12CSJ/STOP - stop joint24CSJ/STOP - stop joint36CSSM/STOP - stop jointEnquiry sheet for cable data
![Page 4: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/4.jpg)
4
01/2
011
Specifications and standardsThe cold-shrinkable 12CSJjoint meets the requirements of CENELEC HD 629.1.
Up to 12 kV
DesignCold-shrinkable joint comprising: 1. Extruded double layer silicone body. 2. Insulating mastic layer. 3. Field control mastic plate. 4. Overall protective cover. 5. Field control mastic. 6. Water sealing mastic. 7. Copper mesh. 8. Conductor connector (not included in the standard kit). 9. Screen connection with mechanical connector and copper mesh. 10. Traceability tag.
12CSJSINGLE CORE
STRAIGHT JOINT
6/10 (12) kV6.35/11 (12) kV
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
Cold-shrinkable
straight jointtype
VoltageUm(kV)
Diameter overcore insulation
(mm)
Diameter over outer sheath
(mm)
Conductor sizes (mm2)
(for information only)
min max max min max
12CSJ-2 12 17 33 46 70 300
![Page 5: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/5.jpg)
5
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components:
The kit also comprises a pulling hook,
adhesive tape, water sealing mastic,
traceability tag, lubricant, wipers, gloves
and installation instructions.
Ordering instructionsSelect the part numbercorresponding to the cable core insulation diameter.
1 x 12CSJ-2 Cold-shrinkable
joint body
1 x Heat-shrinkable joint cover
1 x Mechanicalconnector for
screen continuity
12CSJ-2/HSSCold-shrinkable
joint kit
Orderingpart number
Conductor sizes (mm2)(for information only)
Diameter overcore insulation
(mm)
Diameter overouter sheath
(mm)70 95 120 150 185 240 300
12CSJ-2/HSS 17 - 33 46 max12CSJ-2
Example:The copper wire screened cable is 12 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 22.4 mm.Order a 12CSJ-2/HSS cold-shrinkable joint kit.
All types of conductor connectors can be used. The conductor connectors must be within the dimensions specified.
8 mm max
Dia. 35 mm max
145 mm max
1 x Field control
mastic plate
1 x Roll of copper mesh tape
2 x Fieldcontrol
mastic strip
Can be supplied for use with fabric tape (graphite)
screened cables.
For use withcopper tape
screened cables. Order: -/MT.
For use withthree-core cables.See TT-24CSJ.
Can be supplied with all common types of conductor
connectors.
Can be suppliedas a stop joint
Please contact our representative.
For use withother cable types.
Please contact our representative.
![Page 6: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/6.jpg)
6
01/2
011
Specifications and standardsThe cold-shrinkable 24CSJjoint meets the requirements of CENELEC HD 629.1.
Up to 24 kV
Cold-shrinkable
straight jointtype
L(mm)
VoltageUm(kV)
Diameter over outer sheath
(mm)
Diameter overcore insulation
(mm)
Conductor sizes for 24 kV (mm2)
(for information only)
max min max min max
24CSJ-1
24CSJ-2
24CSJ-3
750
750
850
24
24
24
46
46
57
18
23
30
30
33
54
35
95
240
185
300
630
DesignCold-shrinkable joint comprising:1. Extruded triple layer EPDM rubber body.2. Two layer plate with a semi- conductive and a field control mastic layer.3. Overall protective EPDM cover.4. Field control mastic.5. Water sealing mastic.6. Copper stocking.7. Self-adhesive copper tape.8. Traceability tag.9. Conductor connector (not included in the standard kit).
24CSJSINGLE CORE
STRAIGHT JOINT
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
7
1
8
4
3
2
9
6
4
7
L
5
5
![Page 7: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/7.jpg)
7
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components:
The kit also comprises a pulling hook,
adhesive tape, lubricant, wipers, gloves and
installation instructions.
Ordering instructionsSelect the part numbercorresponding to the cable core insulation diameter.
1 x 24CSJ Cold-shrinkable
joint
1 x Two-layer plate
2 x Field control mastic strip or plate
2 x Self-adhesive copper tape
Orderingpart number
Conductor sizes (mm2) (for information only) Diameter overcore insulation
(mm)
Diameter overouter sheath
(mm)35 50 70 95 120 150 185 240 300 400 500 630
24CSJ-1 18 - 30 46 max
24CSJ-2 23 - 33 46 max
24CSJ-3 30 - 54 57 max
Example:The copper wire screened cable is 24 kV, 120 mm2 stranded aluminium with a diameter over core insulation of 25.3 mm.Order a 24CSJ-2 cold-shrinkable joint kit.
24CSJ-1
24CSJ-2
24CSJ-3
All types of conductor connectors can be used. The conductor connectors must be within the dimensions specified.
T max
Dia. max
L max
Joint type
L max(mm)
Dia max(mm)
T max(mm)
24CSJ-1 150 35 8
24CSJ-2 150 35 8
24CSJ-3 280 54 15
24CSJCold-shrinkable
joint kit
For use withcopper tape
screened cables. Order: -/MT.
For use withthree-core cables.See TT-24CSJ.
Can be supplied with all common types of conductor
connectors.
Can be suppliedas a stop joint
Please contact our representative.
For use with Alupe orC 33-226 cables.
Please contact our representative.
For use withother cable types.
Please contact our representative.
![Page 8: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/8.jpg)
8
01/2
011
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.
Specifications and standardsThe cold-shrinkable 24CSJ-Mjoint meets the requirements of CENELEC HD 629.1.
Up to 24 kV
Cold-shrinkablestraight joint
type
VoltageUm(kV)
Diameterover outer
sheath(mm)
Diameter overcore insulation
(mm)
Conductor sizes(mm2)
min max min max24CSJ-M50.150
24CSJ-M95.240
24
24
46 max
46 max
18
23
30
33
50
95
150
240
DesignCold-shrinkable joint comprising:1. Extruded triple layer EPDM rubber body.2. Two layer plate with a semi- conductive and a field control mastic layer.3. Overall protective EPDM cover.4. Field control mastic.5. Water sealing mastic.6. Copper stocking.7. Self-adhesive copper tape.8. Traceability tag.9. Mechanical conductor connector (included in the standard kit).
24CSJ-MSINGLE CORE STRAIGHT JOINT
WITH MECHANICAL CONNECTOR
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
600 mm3
5
7
4
5
6
2
9
1
4
7
8
![Page 9: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/9.jpg)
9
Orderingpart number
Voltage(Um)(kV)
Conductor sizes (mm2) Diameter overcore insulation
(mm)
Diameter overouter sheath
(mm)50 70 95 120 150 185 240
24CSJ-M50.150 24 18 - 30 46 max
24CSJ-M95.240 24 23 - 33 46 max
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components:
The kit also comprises a pulling hook,
adhesive tape, lubricant, wipers, gloves and
installation instructions.
Ordering instructionsSelect the part number corresponding to the voltage class and conductor size.
1 x 24CSJ-M Cold-shrinkable
joint
1 x Two-layer plate
2 x Field control mastic strip or plate
2 x Self-adhesive copper tape
24CSJ-M50.150
Example:The copper wire screened cable is 24 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 26.5 mm.Order a 24CSJ-M95.240 cold-shrinkable joint kit.
1 x Mechanical connector
For use with copper wire screened cables.
No earthing device is necessary.
For use withcopper tape
screened cables. Order: -/MT.
For use with fabric tape (graphite) screened cables.
Order additionalsemi-conductive tape
(type TSC).
For use with Alupe orC 33-226 cables.
Please contact our representative.
For use withother cable types.
Please contact our representative.
For use withlarger sections.
Please contact our representative.
24CSJ-M95.240
24CSJ-MCold-shrinkable
joint kit
![Page 10: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/10.jpg)
10
01/2
011
Up to 24 kV
24CSJ-SSINGLE CORE STRAIGHT JOINT
Specifications and standardsThe cold-shrinkable 24CSJ-Sjoint meets the requirements of CENELEC HD 629.1.
Cold-shrinkablestraight joint
type
VoltageUm(kV)
Diameter over outer sheath
(mm)
Diameter overcore insulation
(mm)
Conductor sizes for 24 kV (mm2)
(for information only)
max min max min max
24CSJ-S1 24 48 18 36 35 300
24CSJ-S/M50.24024CSJ-S/M95.240
2424
4848
1823
3636
5095
240240
DesignCold-shrinkable joint comprising:1. Extruded triple layer EPDM rubber body.2. Two layer plate with a semi- conductive and a field control mastic layer.3. Overall protective EPDM cover.4. Field control mastic.5. Water sealing mastic.6. Copper stocking.7. Self-adhesive copper tape.8. Traceability tag.9. Mechanical conductor connector.
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.This product can be installed where installation space is limited (minimum 1 metre).
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
3
7
600 mm
2
9
1
7
5
7
4
5
6
4
8
![Page 11: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/11.jpg)
11
1 x Mechanical connector
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components (The kit contents can be slightly different):
The kit also comprises an installation hook,
adhesive tape, lubricant, wipers, gloves,
template, white pencil and installation
instructions.
Ordering instructionsSelect the part numbercorresponding to the cable core insulation diameter.
Example:The copper wire screened cable is 24 kV, 120 mm2 stranded aluminium with a diameter over core insulation of 25.3 mm.Order a 24CSJ-S/M95.240 cold-shrinkable joint kit.
Orderingpart number
Conductor sizes (mm2) (for information only) Diameter overcore insulation
(mm)
Diameter overouter sheath
(mm)
Connectorincluded35 50 70 95 120 150 185 240 300
24CSJ-S1 18 - 36 48 max No
24CSJ-S/M50.240 18 - 36 48 max Yes
24CSJ-S/M95.240 23 - 36 48 max Yes
24CSJ-S1
24CSJ-S/M50.240Cold-shrinkable
joint kit
2 x Self-adhesive copper tape
2 x Mastic strip
1 x Two-layer plate
1 x Water sealing
mastic strip
1 x 24CSJ-S Cold-shrinkable
compact joint
For use with copper wire screened cables.
No earthing device is necessary.
For use withcopper tape
screened cables. Order: -/MT.
For use with fabric tape (graphite) screened cables.
Order additionalsemi-conductive tape
(type TSC).
Can be suppliedas a stop joint
Please contact our representative.
For use withother cable types.
Please contact our representative.
24CSJ-S/M50.240
24CSJ/S-M95.240
All types of conductor connectors can be used. The conductor connectors must be within the dimensions specified.
12 mm max
Dia. 35 mm max
120 mm max
For use with Alupe orC 33-226 cables.
Please contact our representative.
![Page 12: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/12.jpg)
12
01/2
011
Specifications and standardsThe cold-shrinkable 36CSJjoint meets the requirements of CENELEC HD 629.1.
Up to 36 kV
Cold-shrinkable
straight jointtype
VoltageUm(kV)
Diameter over outer sheath
(mm)
Diameter overcore insulation
(mm)
Conductor sizes for 36 kV(mm2)
(for information only)
max min max min max
36CSJ-2 36 48 23 36 50 240
DesignCold-shrinkable joint comprising:1. Extruded triple layer EPDM rubber body.2. Semi-conductive tape embedded in field control mastic.3. Overall protective EPDM cover.4. Field control mastic.5. Water sealing mastic.6. Copper stocking.7. Self-adhesive copper tape.8. Traceability tag.9. Conductor connector (not included in the standard kit).
36CSJSINGLE CORE
STRAIGHT JOINT
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
18/30 (36) kV19/33 (36) kV
8
3
2
7
750 mm9
1
4
7
5
7
4
5
6
![Page 13: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/13.jpg)
13
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components:
The kit also comprises a pulling hook,
adhesive tape, lubricant, wipers, gloves,
template, white pencil and installation
instructions.
Ordering instructionsSelect the part numbercorresponding to the cable core insulation diameter.
1 x 36CSJ Cold-shrinkable
joint
1 x Field control mastic
plate
5 x Field control mastic
strip
1 x Roll of semi-conductive tape
2 x Self-adhesive copper tape
Orderingpart number
Conductor sizes (mm2) (for information only) Diameter overcore insulation
(mm)
Diameter overouter sheath
(mm)50 70 95 120 150 185 240
36CSJ-2 23 - 36 48 max
Example:The copper wire screened cable is 36 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 32.1 mm.Order a 36CSJ-2 cold-shrinkable joint kit.
36CSJ-2
For use withcopper tape
screened cables. Order: -/MT.
Can be supplied with all common types of conductor
connectors.
All types of conductor connectors can be used. The conductor connectors must be within the dimensions specified.
8 max
Dia. 35 max
150 max
36CSJCold-shrinkable
joint kit
Can be suppliedas a stop joint
Please contact our representative.
For use with Alupe orC 33-226 cables.
Please contact our representative.
For use withother cable types.
Please contact our representative.
For use withlarger sections.
Please contact our representative.
![Page 14: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/14.jpg)
14
01/2
011
Specifications and standardsThe cold-shrinkable 36CSSMjoint meets the requirements of CENELEC HD 629.1.
Up to 42 kV
Cold-shrinkablestraight joint
type
Covertype
L(mm)
VoltageUm(kV)
Dia. overouter sheath
(mm)
Dia. overcore insulation
(mm)
Conductor sizes for 36 kV (mm2)
(for information only)max min max min max
36CSSM-2/CSC36CSSM-3/CSC36CSSM-3/HSS
Cold-shrinkableCold-shrinkableHeat-shrinkable
750850850
424242
485775
253737
405060
50300300
240500800
DesignCold-shrinkable joint comprising:1. Moulded silicone joint body.2. Semi-conductive plate.3. Overall protective cover.4. Water sealing mastic.5. Copper stocking or mesh.6. Self-adhesive copper tape.7. Traceability tag.8. Conductor connector (not included in the standard kit).
36CSSMSINGLE CORE
STRAIGHT JOINT
18/30 (36) kV19/33 (36) kV
20.8/36 (41.5) kV
ApplicationFor jointing copper wirescreened polymeric cable tobe laid in air or directly buried. The product is fully screened and fully submersible.
Technical characteristicsAll joint bodies are tested for AC withstand prior to leaving the factory.
4
4
7
5
2
1
8
3
6
L
![Page 15: COMPANY PRESENTATION - makewebeasy...COMPANY PRESENTATION While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility](https://reader036.fdocuments.in/reader036/viewer/2022081617/60246225e74faa64be7e186a/html5/thumbnails/15.jpg)
15
Kit contentsThe complete cold-shrinkablejoint kit comprises the following components:
The kit also comprises a pulling hook,
template, adhesive tape, lubricant, wipers,
white pencil, gloves and installation
instructions.
For 36CSSM-3/HSS, a heat-shrinkable
cover is supplied.
Ordering instructionsSelect the part numbercorresponding to the cable core insulation diameter.
1 x 36CSSM Cold-shrinkable
joint
1 x Semi-conductive plate
2 x Self-adhesive copper tape
36CSSMCold-shrinkable
joint kit
Example:The copper wire screened cable is 36 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 32.0 mm.Order a 36CSSM-2/CSC cold-shrinkable joint kit.
All types of conductor connectors can be used. The conductor connectors must be within the dimensions specified. Joint type
L max(mm)
Dia. max(mm)
36CSSM-2 155 35
36CSSM-3
240
60215 (if dia. over insulation
>50 mm.)
For use with copper wire screened cables.
No earthing device is necessary.
8 mm
Dia. max
L max
Orderingpart number
Conductor sizes (mm2) Dia. over core insulation
(mm)
Dia. over outer sheath
(mm)50 70 95 120 150 185 240 300 400 500 630 800
36CSSM-2/CSC 25 - 40 48 max
36CSSM-3/CSC 37 - 50 57 max
36CSSM-3/HSS 37 - 60 75 max
36CSSM-2/CSC
36CSSM-3/CSC
36CSSM-3/HSS
Can be supplied for use with copper tape screened
cables.
For use withlarger sections.
Please contact our representative.
Can be supplied as a stop joint
Please contact our representative.
Can be supplied for use with C 33-226 cables.
For use withother cable types.
Please contact our representative.