COMPANY AND PRODUCTS INTRODUCTION Sâles, 08.08.2015.
-
Upload
clifton-dean -
Category
Documents
-
view
220 -
download
1
Transcript of COMPANY AND PRODUCTS INTRODUCTION Sâles, 08.08.2015.
COMPANY AND PRODUCTS INTRODUCTION
Sâles, 19.04.23
2BUMOTEC SA COMPANY INTRODUCTION
BIENVENUE WILLKOMMEN
Welkom
BENVENUTO Bienvenida
BEM-VENIDO WELCOME
VÄLKOMMEN NAMASKAR
欢 迎 Прием
3
COMPANY PROFILE
COMPANY PROFILE
Localisation :
Ideally located in the region of Gruyère, close to the main manufacturers of microtechnologies and medical industries of Switzerland.
Bumotec is not just another machine tools seller. Bumotec is a complete machining solutions provider.
4
COMPANY PROFILE
COMPANY PROFILE
Bumotec SA in numbers :
Year of establishment : 1973 Entry in the Starrag Group : 2012 Number of employees : 160 Annual turnover in 2013 : 48 millions (CHF) Machines produced in 2013: 77 sets
Quality in our product is not what we put into it. It is what you get out of it.
5
COMPANY PROFILE
COMPANY PROFILE
Bumotec SA, today Bumotec SA, tomorrow (end of 2015)
Since 1973 till today, Bumotec has always kept control of the entire manufacturing process.All manufacturing steps, such as machining, housing, electrical and assembly are 100% performed inhouse. This requires a high level of investment in the equipment, to keep our performance at the highest possible manufacturing level, resulting in outstanding quality machines and services.
We are proud to say that our machines are
6
COMPANY PROFILE
COMPANY PROFILE
Designing, manufacturing and selling of complete machining solutions for our customers worldwide.
Main markets Type of products for Bumotec machines :
• Watch & Jewellery industry
• Medtec Industry
• Aeronautic / Aerospace / Defense
• Micromechanic
7
MACHINE TOOLS RANGE
Quelle/Legende
s191 H LinearMill/Turn 7 axes, Horizontal
s100 multi or mono Multistation transfer machine
s191 V LinearMill/Turn 5-axes, Vertical
s128Micro-milling & turning 5 axes
s1000CTransfer 4-axes, total 38 axes
s210, s220 & s230For jewellery industry
8
MACHINE TOOLS RANGE s1000C
MACHINE TOOLS RANGE
Horizontal Transfer Machine with 9 stations and 4 axes per stations.•Bar feed, up to Ø42mm, circular bars or profiles possible•Horizontal and vertical spindles on each station•9th station for back-side machining (6th face)
Example of a station with 4 CNC axes
9
MACHINE TOOLS RANGE s1000C
MACHINE TOOLS RANGE
Horizontal Transfer Machine with 9 stations and 4 axes per station.
Station no. 1 Station no. 2 Station no. 3 Station no. 4 Station no. 5
Rough milling of Finish milling of Roughing and finishing Roughing and finishing Front - sideexternal shape external shape of front groove of front boring drilling & tapping
Station no. 6 Station no. 7 Station no. 8 Station no. 9 Station no. 10
Roughing and Roughing and Workpiece cutting Roughing and Bar advance Finishing Upper finishing lateral off finishing 6th face for new partBoring groove
10
MACHINE TOOLS RANGE s1000C
MACHINE TOOLS RANGE
Working from bar for high production volumes.
11
MACHINE TOOLS RANGE s1000C
MACHINE TOOLS RANGE
Applications:
12
MACHINE TOOLS RANGE s128
MACHINE TOOLS RANGE
Micro-milling & turning, 5 axes
•Small footprint to fit through small doors •Simultaneous 5 axes machining•Center of rotation placed in the workpiece•Jewellery, micro milling and engraving•Automated working from short bars (300mm)•Tools changer
13
MACHINE TOOLS RANGE s191 H Linear
MACHINE TOOLS RANGE
S-191 HorizontalLinear motor drive Multitasking Mill/Turn Machining Center
•Simultaneous 5 axes milling / turning / grinding.•Complete 6 sides machining (retaking unit)•Horizontal main spindle.•Bar feeding, up to Ø65 mm
A modular and adaptable concept built around the same machine base!
14
MACHINE TOOLS RANGE s191H Linear
MACHINE TOOLS RANGE
Machine Kinematics
Standard Machine base
Linear motor drive Y axis
Linear motor drive Z axis
HSK-A-40 tool spindle
Main spindle
Module
Module
Back working unit
15
MACHINE TOOLS RANGE s191 V Linear
MACHINE TOOLS RANGE
S-191 VerticalLinear Motor driveTurn-Mill Machining Center
•Same base as the S-191 Horizontal Simultaneous 5-axes milling and turning•Working from blanks
A modular and adaptable concept built around the same machine base!
16
MACHINE TOOLS RANGE s100 multi and mono
MACHINE TOOLS RANGE
High speed and precision multi stations milling machine
-Each 4 stations equiped with 2 spindles (60’000 rpm)-Each spindle has his own ATC of 18 tools (total 144 tools)-All axes are equiped with linear motor drive-3 axes for each stations-All axes with linear motor drive
17
Faceting machine s210 / s220 / s230
Quelle/Legende
Especially for jewellery industry. For manufacturing rings and bangles
18CONCLUSION
THANK YOU FOR YOUR ATTENTION
www.bumotec.ch
Big enough to perform Small enough to listen
www.starrag.com