COMPACT POWERPLUS SCPP - Elta Fans to BS EN ISO 1461:2009 after fabrication. IMPELLER Adjustable...
Transcript of COMPACT POWERPLUS SCPP - Elta Fans to BS EN ISO 1461:2009 after fabrication. IMPELLER Adjustable...
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request.
Tel: 01384 275800 Fax: 01384 275810 Email: [email protected] Visit: eltaselect.com Twitter: @eltafans 2
POWERPLUS SCPP
QU
ICK
FAC
TS ü 4 standard sizes from 450mm to 630mm.ü Air volume flow rates up to 4.6 m³/s.ü Static pressures up to 475 Pa.ü Ideal for internal or external use.ü Available in AC.
Contra-Rotating Axial Flow Fan
CASING
The all metal fan casing provides a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:2009 after fabrication. IMPELLER
Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium
(LM6), natural finish. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS
Motors are highly efficient, lightweight induction motors with sealed for life, maintenance free ball bearings, which allows the fan to be installed at any angle. Each motor is matched to the aerodynamic performance of the impeller. Motors are Class F insulated to EN 60034-5, weatherproofed to IP55 and
(excluding size 630) suitable for speed control. Each motor has integral thermal overload protection. Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and +50°C when used with a speed controller. Electrical connection to the motor is provided by an IP55 terminal box which is fitted onto the outer side of the fan casing. QUALITY MANAGEMENT
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCPP units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
ACCESSORIES For full accessories & controls information please visit eltaselect.com
Transformer ControllerProduct Code: 149-TC
Impeller Side GuardProduct Code: 078C
Flexible ConnectionsProduct Code: 063 MAN
AV Mounts (Set of 4)Product Code: 062 00
Mounting FeetProduct Code: 060B
Matching FlangesProduct Code: 061B
DamperProduct Code: 019
SilencerProduct Code: 068 DE*P(C)
Bell Mouth InletProduct Code: 241B
TYPICAL APPLICATIONS
• Commercial Kitchens• Sports Halls• Industrial Units
• Warehousing• Factories• Schools
Ancillary PackProduct Code: APK
For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com.
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request.
Tel: 01384 275800 Fax: 01384 275810 Email: [email protected] Visit: eltaselect.com Twitter: @eltafans 3
COMPACT POWERPLUS SCPPSINGLE Phase - 220V to 240V / 50Hz
Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D.Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in dB re-20µPa and is presented for comparative purposes only.
Performance, SFP & Electrical Data
ProductCode
Speedr/min
AirflowSFP
Airflow m³/s @ Static Pressure Pa. OverallEfficiency
%
FMEGN
Motor Electri-cal Data dBA
@ 3m0 25 50 75 100 150 200 250 300 350 400 500 Peak
AmpsInputkW
SCPP450/4-1AC 1465m³/s 2.070 2.028 1.988 1.948 1.904 1.801 1.675 1.538 1.382 - - -
52.7 59 4.01 0.900Inlet 67
W/(L/s) 0.32 0.34 0.35 0.37 0.40 0.45 0.51 0.58 0.66 - - - Outlet 68
SCPP500/4-1AC 1465m³/s 2.284 2.217 2.156 2.099 2.043 1.933 1.817 1.686 1.514 - - -
56.7 63 3.94 0.882Inlet 64
W/(L/s) 0.26 0.28 0.30 0.33 0.35 0.40 0.46 0.52 0.60 - - - Outlet 64
SCPP560/4-1AC 1375m³/s 2.938 2.888 2.836 2.782 2.724 2.599 2.456 2.290 2.097 1.868 1.580 -
52.6 58 6.17 1.364Inlet 65
W/(L/s) 0.35 0.37 0.38 0.40 0.42 0.47 0.52 0.58 0.65 0.75 0.88 - Outlet 65
SCPP630/4-1AC 1340m³/s 4.600 4.504 4.409 4.315 4.220 4.026 3.824 3.612 3.386 3.136 2.823 -
54.2 58 11.40 2.364Inlet 71
W/(L/s) 0.41 0.43 0.44 0.46 0.48 0.53 0.57 0.63 0.69 0.76 0.86 - Outlet -
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request.
Tel: 01384 275800 Fax: 01384 275810 Email: [email protected] Visit: eltaselect.com Twitter: @eltafans 4
1ST STAGE 2ND STAGE
AIR-FLOW
CASING TERMINAL BOXWITH ENTRY HOLE TO SUIT K CONDUIT FITTINGS
E HOLES F EQUI-SPACED ON G PCD(BOTH FLANGES)
AIR-FLOW
15°
C
BA
D
Product CodeFan Dia A
B C D E F G K Weightkg
SCPP450/4-1AC 450 530 540 287 8 12 500 20 81
SCPP500/4-1AC 500 585 550 313 12 12 560 20 85
SCPP560/4-1AC 560 645 500 344 12 12 620 20 58
SCPP630/4-1AC 630 715 500 380 12 12 690 20 67
Accessories
Dimensional DataCOMPACT POWERPLUS SCPP
ProductCode
Transformer Controller
Impeller Side Guard
Ancillary Pack*
Mounting Feet (each)
Matching Flanges (each)
Flexible Connections (each)
AV Mounts (set of 4)
SCPP450/4-1AC 149-TC110 078C-0450-C APK450Sl/003 060B-0450 061B-0450 063-0450-MAN150 062-003
SCPP500/4-1AC 149-TC110 078C-0500-C APK500Sl/003 060B-0500 061B-0500 063-0500-MAN150 062-003
SCPP560/4-1AC 149-TC110 078C-0560-C APK560Sl/003 060B-0560 061B-0560 063-0560-MAN150 062-003
SCPP630/4-1AC - 078C-0630-C APK630Sl/003 060B-0630 061B-0630 063-0630-MAN200 062-003
ProductCode Damper Bell Mouth
InletSilencer 1D Podded**
Silencer 1D Unpodded**
Silencer 2D Podded**
Silencer 2D Unpodded**
Wiring Diagram
SCPP450/4-1AC 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-510
SCPP500/4-1AC 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-510
SCPP560/4-1AC 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-510
SCPP630/4-1AC 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-510
Dimensions are in mm.
* Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet.** Melinex lined silencers must be used to prevent grease impregnation into the acoustic media for kitchen extract applications as prescribed for kitchen ventilation systems. Contact Elta Fans for insertion losses for melinex lined silencers.
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request.
Tel: 01384 275800 Fax: 01384 275810 Email: [email protected] Visit: eltaselect.com Twitter: @eltafans 5
NotesCOMPACT POWERPLUS SCPP
www.eltafans.com
ExportTel: +44 (0) 1489 566500Fax: +44 (0) 1489 566555Email: [email protected]
17 Barnes Wallis Road,Segensworth East Industrial Estate, Fareham, Hampshire,PO15 5ST United Kingdom
Building ServicesTel: +44 (0) 1384 275800Fax: +44 (0) 1384 275810Email: [email protected]
46 Third Avenue,Pensnett Trading Estate,Kingswinford, West Midlands,DY6 7US United Kingdom
Applied TechnologyTel: +44 (0) 1489 566500Fax: +44 (0) 1489 566555Email: [email protected]
17 Barnes Wallis Road,Segensworth East Industrial Estate, Fareham, Hampshire,PO15 5ST United Kingdom
A member ofHEVAC ASSOCIATION
BS EN ISO 9001:2008 FM 556465