Commonwealth of Australia Gazette · The Australian Customs Service (Customs) publishes the...
Transcript of Commonwealth of Australia Gazette · The Australian Customs Service (Customs) publishes the...
Commonwealth of Australia Gazette
No. TC 09/01, Wednesday, 7 January 2009 Published by the Commonwealth of Australia
TARIFF CONCESSIONS
CONTENTS TCO Applications ....................................................................................................... 2 TCO Applications Reworded................................................................................... 15 TCOs Made ............................................................................................................... 16 Local Manufacturer Initiated - TCO Revocation Requests .................................. 18 Local Manufacturer Initiated - TCO Revocation Requests Refused ................... 18 Local Manufacturer Initiated - TCOs Revoked ...................................................... 19 Local Manufacturer Initiated - TCOs Revoked and Re-Issued ............................ 19 Customs Review of TCO Applications Notification.............................................. 20 AAT Review of TCO Applications Notification...................................................... 21 Section 273 Determinations Made.......................................................................... 24 Section 273 Determinations Revoked.................................................................... 25 Cheese Quota Transfers.......................................................................................... 26 The Australian Customs Service (Customs) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of charge on the Customs internet site at: http://www.customs.gov.au
Interested parties should select “media, publications and forms”, then “tariff concessions gazette”. The gazettes are listed in date order and may be selected from the list of Adobe Portable Document Format (PDF) files.
General Inquiries: ..............................................................(02) 6275 6404
Facsimile: ...........................................................................(02) 6275 6376
Cat. No. ISSN 0813-8389 ©Commonwealth of Australia, 2009
2 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Submission forms are available from Custom Houses throughout Australia or on the Customs web site www.customs.gov.au.
For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email [email protected].
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
3808.92.00 FUNGICIDES, having a basis of metalaxyl-M Op. 26.11.08 - TC 0841238 Stated Use: Provides extended residual and systematic control of pythium in turf Applicant: SYNGENTA CROP PROTECTION PTY LTD
50
5%
3920.20.00 SHEETS, NON VULCANISABLE THERMOPLASTIC POLYOLEFIN, grain finish on one side, in rolls, thickness NOT less than 0.5 mm and NOT greater than 1.5 mm Op. 19.11.08 - TC 0840426 Stated Use: Dashboard covering in motor vehicles Applicant: TOYOTA TSUSHO (AUSTRALASIA) PTY.LTD
50
5%
3923.10.00 BOXES, polypropylene, single loading AND stack loading Op. 24.11.08 - TC 0840874 Stated Use: For bulk packaging of goods Applicant: PAKSMART INTERNATIONAL (HOLDINGS) PTY.LTD
50
5%
3925.90.00 TEA TOWEL HOLDERS Op. 04.12.08 - TC 0842573 Stated Use: Holding tea towels Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
6307.10.10 CLOTHS, CLEANING, knitted Op. 24.11.08 - TC 0841054 Stated Use: Kitchen cleaning cloths Applicant: FREUDENBERG HOUSEHOLD PRODUCTS PTY LTD
50
7.5%
3 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
6804.21.00 INSERTS, REAMER, synthetic diamond enhanced Op. 28.11.08 - TC 0841677 Stated Use: For brazing into reamer bodies Applicant: SMITH INTERNATIONAL AUSTRALIA PTY LTD
50
5%
6909.19.00 PROPPANTS, ceramic, having a bulk density NOT less than 1.45 grams per cubic centimetre Op. 08.12.08 - TC 0843073 Stated Use: Used to increase productivity from oil and gas wells Applicant: HALLIBURTON AUSTRALIA PTY LTD
50
5%
7007.11.90 DOORS AND/OR WINDOWS, MOTOR VESSEL, having ALL of the following: (a) stainless steel frames; (b) toughened glass panes; (c) ceramic band fittings Op. 20.11.08 - TC 0840469 Stated Use: Provide access to vessel cabin and protect the cabin from outside elements Applicant: RIVIERA MARINE (INT.) PTY.LTD
50
5%
7210.69.00 STEEL SHEET, aluminium coated, whether or not in coils Op. 08.12.08 - TC 0842958 Stated Use: Automotive mufflers and other high temperature applications Applicant: AMITY PACIFIC PTY LTD
50
5%
7210.70.00 STEEL, cold rolled, zinc coated, painted, thickness NOT less than 0.45 mm and NOT greater than 0.55 mm Op. 01.12.08 - TC 0842023 Stated Use: Manufacture of domestic appliances Applicant: MITSUBISHI AUSTRALIA LIMITED
50
5%
7228.30.10 BARS OR RODS, high alloy steel, conforming to International Material No. 1.6582, Specification 34CrNiMo6 Op. 21.11.08 - TC 0840864 Stated Use: Forging of metal components Applicant: CMI INDUSTRIAL PTY LTD
50
5%
4 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
7228.30.10 BARS OR RODS, high alloy steel, grades 8620 or 8620H or SNCM220 or SNCM220H, having a chemical composition by weight of ALL of the following: (a) Carbon - 0.17% to 0.23% (both inclusive); (b) Silicon - 0.10% to 0.35% (both inclusive); (c) Manganese - 0.60% to 0.95% (both inclusive); (d) Chromium - 0.35% to 0.65% (both inclusive); (e) Molybdenum - 0.15% to 0.30% (both inclusive); (f) Nickel - 0.35% to 0.75% (both inclusive) Op. 05.12.08 - TC 0842882 Stated Use: Forging of metal components Applicant: CMI INDUSTRIAL PTY LTD
50
5%
7228.30.90 BARS OR RODS, steel, grades 15B34M or SMNB3H-1, having a chemical composition by weight of ALL of the following: (a) Carbon - 0.32% to 0.36% (both inclusive); (b) Silicon - 0.15% to 0.35% (both inclusive); (c) Manganese - 1.00% to 1.40% (both inclusive); (d) Chromium - 0.15% to 0.045% (both inclusive); (e) Aluminium - 0.015% to 0.045% (both inclusive); (f) Boron - 0.0005% to 0.0035% (both inclusive) Op. 05.12.08 - TC 0842884 Stated Use: Forging of metal components Applicant: CMI INDUSTRIAL PTY LTD
50
5%
7307.19.00 PIPE FITTINGS, roll grooved or shouldered, being ANY of the following: (a) elbows; (b) tees; (c) reducers; (d) end caps; (e) adapters Op. 04.12.08 - TC 0842803 Stated Use: Tube and pipe fittings for hoses Applicant: DIXON (ASIA PACIFIC) PTY LTD
50
5%
7307.91.00 FLANGE ADAPTERS, PIPE OR TUBE OR HOSE, carbon steel, with or without seal Op. 03.12.08 - TC 0842547 Stated Use: For connection and/or disconnection of pipes, tubes and hoses Applicant: HYDRAULINK AUSTRALIA PTY LTD
50
5%
5 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
7307.92.00 FITTINGS AND ADAPTORS, PIPE OR TUBE OR HOSE, carbon steel, with or without seal, being ANY of the following: (a) elbows, 90 degrees; (b) elbows, 45 degrees; (c) elbows, 3 way tees, being either male to female OR combinations of both; (d) tube sleeves; (e) bends, 90 degrees; (f) bends, 45 degrees Op. 03.12.08 - TC 0842548 Stated Use: Fittings and adaptors used for connect and/or disconnect pipes, tubes and hoses Applicant: HYDRAULINK AUSTRALIA PTY LTD
50
5%
7307.99.00 FITTINGS AND ADAPTORS, PIPE OR TUBE OR HOSE, carbon steel, with or without seal, being ANY of the following: (a) reducing or enlarging bush, hexagon; (b) caps, solid or swivel; (c) crosses; (d) nipples, being ANY of the following: (i) hexagon; (ii) barrel; (iii) plain; (iv) reducing; (e) sockets, including reducing and enlarging; (f) plugs, square head or hex head or internal or external hexagon; (g) unions; (h) tube welds or weld-on's; (i) tube compression and tube flared fittings Op. 03.12.08 - TC 0842546 Stated Use: Fittings and adaptors used for connect and/or disconnect pipes, tubes and hoses Applicant: HYDRAULINK AUSTRALIA PTY LTD
50
5%
7310.29.00 TINS, PACKAGING, printed, with or without hinged lid, capacity NOT greater than 3.5 kg Op. 26.11.08 - TC 0841237 Stated Use: Packaging of coffee for retail sale Applicant: CANTARELLA BROS PTY LTD
50
5%
7325.99.00 ACCESS COVERS AND FRAMES, cast iron Op. 04.12.08 - TC 0842574 Stated Use: Covers to enable access to drains and pipes in municipal and civil engineering applications Applicant: WEBFORGE AUSTRALIA PTY LTD
50
5%
6 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
7326.90.90 BANDING, CONVEYOR AND/OR PROCESSING LINES, steel, continuous, welded or prepared for welding, being ANY of the following: (a) mill finished; (b) ground; (c) polished Op. 05.12.08 - TC 0842824 Stated Use: Steel bands used in conveyor or processing lines in the chemical, food, specialty goods and wood and laminating industries Applicant: HEAT AND CONTROL PTY.LTD
50
5%
7411.21.00 TUBES OR PIPES, brass, conforming to the American Society for Testing and Materials B111 C44300 (ASTM B111 C44300) Op. 20.11.08 - TC 0840474 Stated Use: Condenser tubes for heat exchangers Applicant: AUSTRAL BRONZE CRANE COPPER LIMITED
50
5%
7411.22.00 TUBES OR PIPES, copper-nickel, conforming to the American Society for Testing and Materials B111 C70600 (ASTM B111 C70600), having an outside diameter NOT less than 38.1 mm and NOT greater than 152 mm Op. 20.11.08 - TC 0840473 Stated Use: In marina applications such as saltwater piping and in heat exchangers for industrial applications Applicant: AUSTRAL BRONZE CRANE COPPER LIMITED
50
5%
7411.22.00 TUBES OR PIPES, copper-nickel, square, having BOTH of the following: (a) conforming to American Society for Testing and Materials B111 C70600 (ASTM B111 C70600); (b) dimensions NOT greater than 100 mm x 100 mm x 6 mm wt Op. 20.11.08 - TC 0840475 Stated Use: In marine applications such as saltwater piping and in heat exchangers for industrial applications Applicant: AUSTRAL BRONZE CRANE COPPER LIMITED
50
5%
7610.10.00 DOORS, SCREEN, aluminium Op. 25.11.08 - TC 0841118 Stated Use: For the protection against intrusion into the home of flies and insects Applicant: HILLS INDUSTRIES LIMITED
50
5%
8205.51.00 COOKIE CUTTERS Op. 08.12.08 - TC 0842988 Stated Use: Cooking applications Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
7 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8207.90.00 HEXAGON BIT AND DRIVER SETS, comprising NOT less then ANY 3 of the following: (a) adapters; (b) drill bits; (c) hexagon head driver bits; (d) screw guides; (e) replacement screws; (f) screw driver bits; (g) nut drivers; (h) bit holders Op. 19.11.08 - TC 0840298 Stated Use: Hand tools for working timber Applicant: MAKITA (AUSTRALIA) PTY LTD
50
5%
8211.10.00 KNIFE SETS, including utensils, consisting of ALL of the following: (a) turner; (b) ladle; (c) spoon; (d) bottle opener; (e) apple corer; (f) tongs; (g) paring knife; (h) utility knife; (i) boning knife; (j) bread knife; (k) carving knife; (l) cooks knife; (m) kitchen shears; (n) wood organiser Op. 08.12.08 - TC 0842985 Stated Use: In the kitchen in the preparation of food Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
8215.99.00 SCOOPS, BBQ Op. 08.12.08 - TC 0842984 Stated Use: To turn and move food and assist in the cleaning of BBQs Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
8302.50.00 FIXTURES, iron or steel, wall mounted, being EITHER of the following: (a) towel rails; (b) towel bars Op. 08.12.08 - TC 0842982 Stated Use: Drying of towels Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
8 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8307.10.00 OUTER CASING, FLEXIBLE TRANSMISSION SHAFT TUBING, having ALL of the following: (a) inner core of spiral wound carbon steel strip; (b) middle layer of cotton tape impregnated with rubber; (c) brass plated steel wire over middle layer; (d) outer layer of vulcanized neoprene rubber ; (e) outside diameter NOT less than 23 mm and NOT greater than 64 mm Op. 26.11.08 - TC 0841436 Stated Use: To provide a flexible casing for flexible transmission shafts Applicant: FLEXTOOL (AUST) PTY LTD
50
5%
8413.50.90 HYDRAULIC PUMPS, TOWED FLEXIBLE BARGE DISCHARGE SYSTEM, comprising ALL of the following: (a) control panels; (b) hose reels; (c) piping; (d) land anchor Op. 02.12.08 - TC 0844717 Stated Use: For discharge of fuel for storage in flexible or transportable tanks Applicant: DEPARTMENT OF DEFENCE
50
5%
8413.70.90 PUMPS, CENTRIFUGAL, draining, having BOTH of the following: (a) asynchronous motors; (b) motor stack length NOT greater than 40 mm Op. 25.11.08 - TC 0841150 Stated Use: The draining of condensate from air conditioning Applicant: HVACR SUPPLIES PTY LTD
50
5%
9 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8419.90.00 PARTS, COFFEE MAKING MACHINES, being ANY of the following: (a) axles; (b) bases; (c) blocks; (d) burrs; (e) chassis; (f) coin acceptors; (g) command units; (h) connections; (i) containers; (j) controls; (k) covers; (l) displays; (m) doors; (n) drains; (o) elbows; (p) feet; (q) fittings; (r) flanges; (s) flow units; (t) frames; (u) fronts; (v) guides; (w) handles; (x) holders; (y) hoods; (z) housings; (aa) joints; (ab) junctions; (ac) lids; (ad) lifters; (ae) mechanical units; (af) mills; (ag) modules; (ah) nulls; (ai) outlets; (aj) panels; (ak) pipes; (al) pistons; (am) pluggers; (an) pods; (ao) probes; (ap) processing units; (aq) profiles; (ar) replenishment units; (as) retrofit kits; (at) sidewalls; (au) suctioners; (av) supports; (aw) thermoblocks; (ax) trays; (ay) tubes; (az) unions Op. 04.12.08 - TC 0842570 Stated Use: Repair and maintenance of coffee making machines Applicant: TIGER COFFEE PTY.LTD
50
5%
8421.21.90 SEPARATORS, HYDROCYCLONE, incorporating an interchangeable inlet wedge Op. 27.11.08 - TC 0841507 Stated Use: Cyclone filter separators used to dewater and deslime mineral, concrete and iron sands Applicant: LINATEX AUSTRALIA PTY.LTD
50
5%
10 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8424.89.90 TUNDISH SPRAYERS Op. 25.11.08 - TC 0841108 Stated Use: Spray refractory material onto tundish in a steel making facility Applicant: BLUESCOPE STEEL.LTD
50
5%
8424.89.90 SPRAYERS AND/OR APPLICATORS, manually operated, incorporating a bottle closure Op. 04.12.08 - TC 0842625 Stated Use: As a fine mist sprayer in a broad range of fluid applications Applicant: CORMACK PACKAGING PTY LTD
50
5%
8425.49.00 LIFTERS, BOGIE REMOVAL SYSTEM, LOCOMOTIVE AND/OR RAILWAY ROLLING STOCK, programmable logic controlled, electromechanical, being ANY of the following: (a) screw jacks; (b) lifting jacks; (c) scissor lifts Op. 04.12.08 - TC 0842565 Stated Use: The lifting of bogies from locomotives and railway rolling stock Applicant: AE PROPERTIES PTY LTD
50
5%
8431.39.00 PARTS, STRUCTURAL, BOGIE REMOVAL SYSTEM, LOCOMOTIVE AND/OR RAILWAY ROLLING STOCK, programmable logic controlled, being ANY of the following: (a) lifter bases and/or base frames and/or main frames; (b) bogie lift platforms; (c) brackets and/or guides and/or yokes; (d) columns and/or plates and/or supports and/or support blocks; (e) safety guards; (f) shaft retainers; (g) side shifter tables and/or end retainers; (h) wheel support arms and/or wheel chocks and/or wheel chock clevis; (i) welded rail beams Op. 04.12.08 - TC 0842566 Stated Use: A dedicated system for the removal of bogies from locomotives and railway rolling stock Applicant: ANDREW ENGINEERING (AUST) PTY.LTD
50
5%
8431.43.00 DRILL COLLARS, conforming to American Petroleum Institute Specification 7: 2001 (API Spec 7:2001) Op. 19.11.08 - TC 0840348 Stated Use: Used between the drill pipe and the bit in the drill stem to put weight on the bit to enable drilling Applicant: ATLAS DRILLING CO PTY LTD
50
5%
11 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8431.43.00 GRAPPLES, OIL AND GAS WELL, fishing Op. 20.11.08 - TC 0840470 Stated Use: Removing fish from oil and gas wells Applicant: SMITH INTERNATIONAL AUSTRALIA PTY LTD
50
5%
8431.43.00 KELLY BARS, DRILL RIG OR PILE DRIVER Op. 04.12.08 - TC 0842801 Stated Use: Drilling attachment transmitting torque and downward force to drilling tool Applicant: WAGSTAFF PILING PTY.LTD
50
5%
8431.49.90 HAMMER LEADERS, PILE DRIVER Op. 21.11.08 - TC 0840865 Stated Use: Pile driver hammer support or cage for foundation piling Applicant: WAGSTAFF PILING PTY.LTD
50
5%
8438.90.10 PARTS, DOUGH METERING PUMPS, being pump housings Op. 20.11.08 - TC 0840471 Stated Use: Housing for dough metering pumps used in the making of biscuits, cookies etc Applicant: ARNOTT'S BISCUITS LIMITED
50
5%
8438.90.10 PARTS, BISCUIT MAKING MACHINE, being dough metering pumps Op. 20.11.08 - TC 0840472 Stated Use: The pump is designed to pump biscuit dough into a biscuit extruding machine Applicant: ARNOTT'S BISCUITS LIMITED
50
5%
12 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8465.99.00 BUMPER FASCIA HOLE PUNCHING MACHINES Op. 03.12.08 - TC 0842469 Stated Use: Punching holes in automotive bumper fascias Applicant: TOYOTA TSUSHO (AUSTRALASIA) PTY.LTD
50
5%
8479.82.00 CULLET PROCESSING LINE, including BOTH of the following: (a) steel conveyors; (b) crushing rolls Op. 18.11.08 - TC 0840254 Stated Use: Crushing and disposal of cullet after breakout Applicant: LISEC AUSTRALIA PTY LTD
50
5%
8479.89.90 MOTOR VEHICLE OPERATION SYSTEM, including ALL of the following: (a) steering and/or accelerator and/or brake and/or transmission controls; (b) secondary controls, including horn and/or indicators and/or hazard warning lights and/or wipers and/or high and low beam; (c) vehicle to system interfaces; (d) central processing units; (e) information displays; (f) electric motors Op. 24.11.08 - TC 0840875 Stated Use: To allow disabled people with limited movement the ability to control and operate a motor vehicle Applicant: PROBLEM MANAGEMENT ENGINEERING PTY LTD
50
5%
8481.80.90 DAMPERS, AIR OR GAS FLOW CONTROLLING, STEAM GENERATION BOILER, ALUMINA PLANT Op. 19.11.08 - TC 0840418 Stated Use: Controlling air or gas flow through ducts in alumina plant steam generation boiler Applicant: RIO TINTO ALUMINIUM LIMITED
50
5%
8481.80.90 VALVES, CIRCULATING, OIL AND GAS WELL, having activation balls and shut off balls Op. 20.11.08 - TC 0840697 Stated Use: Used in well bore clean up operations Applicant: SMITH INTERNATIONAL AUSTRALIA PTY LTD
50
5%
8481.80.90 COUPLINGS, hydraulic, being EITHER of the following: (a) couplers; (b) nipples Op. 04.12.08 - TC 0842804 Stated Use: Tube and pipe fittings for hoses Applicant: DIXON (ASIA PACIFIC) PTY LTD
50
5%
13 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8483.40.90 PARTS, BOGIE REMOVAL SYSTEM, LOCOMOTIVE AND/OR RAILWAY ROLLING STOCK, programmable logic controlled, electromechanical, being EITHER of the following: (a) gearboxes; (b) couplings Op. 04.12.08 - TC 0844881 Stated Use: The lifting of bogies from locomotives and railway rolling stock Applicant: ANDREW ENGINEERING (AUST) PTY.LTD
50
5%
8502.20.00 GENERATORS, powered by spark-ignition internal combustion engine, having ALL of the following: (a) frequency NOT less than 50 Hz; (b) voltage NOT less than 230 V AC; (c) AC output NOT less than 5 500 W and NOT greater than 8 500 W Op. 24.11.08 - TC 0840876 Stated Use: Hard wired to fixed installation such as a house to provide stand by power Applicant: CUMMINS SOUTH PACIFIC PTY LTD
50
5%
8536.20.00 CIRCUIT BREAKERS, industrial, hydraulic magnetic, conforming to Australian Standard AS 3111-1994 Op. 05.12.08 - TC 0842822 Stated Use: Circuit breakers are used in industrial and commercial applications to protect electrical circuits from damage caused by overload or short circuit Applicant: HEINEMANN ELECTRIC PTY.LTD
50
5%
8536.50.99 RESIDUAL CURRENT DEVICES, industrial, hydraulic magnetic, conforming to Australian/New Zealand Standard AS/NZS 3190:2002 Op. 05.12.08 - TC 0842821 Stated Use: Devices that automatically disconnects electric circuits when there is earth current leakage Applicant: HEINEMANN ELECTRIC PTY.LTD
50
5%
8607.21.00 PARTS, ELECTRONIC AIR BRAKE CONTROL, LOCOMOTIVE, being ANY of the following: (a) brake controllers; (b) handle assemblies; (c) brake pipes; (d) brake cylinders; (e) equalizing reservoirs; (f) control portion assemblies; (g) reservoir filter assemblies; (h) handle junction boxes; (i) dead in train controls Op. 25.11.08 - TC 0841109 Stated Use: Parts for use in an electro-pneumatic locomotive braking system Applicant: UNITED GROUP RAIL SERVICES LIMITED
50
5%
14 TCO Applications Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate
8705.90.00 VEHICLES, SWEEPER, SUCTION, ride in, having ALL of the following: (a) two wheel steering; (b) sweeping width NOT greater than 2 880 mm; (c) dirt hopper capacity NOT greater than 1.85 m3; (d) transport mode NOT greater than 50 km per hour; (e) outer turning radius NOT greater than 3 850 mm; (f) width NOT greater than 1 320 mm; (g) height NOT greater than 1 995 mm Op. 27.11.08 - TC 0841590 Stated Use: To clean pedestrian mall type areas of litter and dirt Applicant: MACDONALD JOHNSTON PTY LTD
50
5%
8708.99.99 CYLINDER ASSEMBLIES, COMPRESSED NATURAL GAS, BUS, assembled in roof mounted frames Op. 20.11.08 - TC 0840620 Stated Use: Containers for the storage of compressed natural gas to power buses Applicant: MAN AUTOMOTIVE IMPORTS PTY LTD
50
5%
8905.90.10 TOWED FLEXIBLE BARGE DISCHARGE SYSTEM, comprising ALL of the following: (a) barge; (b) control panels; (c) piping; (d) sea anchor Op. 02.12.08 - TC 0842377 Stated Use: For discharge of fuel for storage in flexible or transportable tanks Applicant: DEPARTMENT OF DEFENCE
50
5%
9506.91.00 EXERCISE BARS, multipurpose, metal Op. 04.12.08 - TC 0842699 Stated Use: For upper body strength and conditioning Applicant: SKYFIT PTY LTD
50
5%
9603.90.00 PACKS, CLEANING BBQ, consisting of BOTH of the following: (a) brushes; (b) scrapers Op. 08.12.08 - TC 0842986 Stated Use: BBQ applications Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
9603.90.00 BRUSHES, BBQ Op. 08.12.08 - TC 0842987 Stated Use: Cleaning of BBQs Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
15 TCO Applications Reworded Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
TCO Applications Reworded
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION PARAGRAPH 269l(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN OBJECTION SUBMISSION
Amended descriptions have been proposed for the Tariff Concession Order applications shown in the following TABLE.
Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14 days after the publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification
3903.30.00 RESIN, ACRYLONITRILE BUTADINE STYRINE (ABS), granulated, having ALL of the following properties: (a) melt flow rate NOT less than 3.5 g/min and NOT greater than 9 g/min complying with International Standard ISO 1333 at test condition 220 degrees celsius; (b) charpy impact, notched NOT less than 23 kJ/m2 complying with International Standard ISO 179 at 23 degrees celsius; (c) tensile modulus NOT greater then 2 500 MPa complying with International Standard ISO 527; (d) elongation at yield NOT less than 2.3% complying with International Standard ISO 527 Op. 02.09.08 - TC 0829301 Stated Use: Manufacture of continuous extruded environmentally sustainable edgings and profiles Applicant: SURTECO AUSTRALIA PTY LTD
50
7305.11.00 PIPE, SUBMERGED ARC WELDED (SAW), having EITHER of the following: (a) outside diameter NOT less than 750 mm; (b) wall thickness NOT less than 9.53 mm Op. 27.08.08 - TC 0828344 Stated Use: Alumina plant piping connections Applicant: RIO TINTO ALUMINIUM LIMITED
50
8504.50.90 COILS, RECTIFORMER, being spiral wound paper covered copper cable having a rectangular cross section Op. 04.11.08 - TC 0838257 Stated Use: Parts for an electrical diode rectiformer which enables AC/DC conversion in the production of zinc from ore concentrates Applicant: SUN METALS CORPORATION PTY LTD
50
16 TCOs Made Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
TCOs Made
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods.
Local manufacturers of substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect
3204.17.00 PIGMENT PREPARATIONS, but NOT including masterbatches, synthetic, predispersed by particle coating in low molecular weight polyethylene wax Op. 02.10.08 Dec. date 19.12.08 - TC 0833885
50
3926.90.90 FITTINGS, FLAT SCREEN DISPLAY, having ALL of the following: (a) ball joint rotation mechanism; (b) adjustable ball joint tension; (c) pole clamp Op. 30.09.08 Dec. date 19.12.08 - TC 0833362
50 %
3926.90.90 DOG HOUSES, moulded polypropylene Op. 07.10.08 Dec. date 19.12.08 - TC 0834340
50
4819.50.00 SLEEVES, DISC, paper with clear film window Op. 30.09.08 Dec. date 19.12.08 - TC 0833536
50
6815.10.00 PARTS, PARALLEL SLIDE OR CHECK STEAM VALVES, exfoliated graphite and/or carbon, being ANY of the following: (a) gland packings; (b) pressure seal bonnet gaskets; (c) gland pack ropes; (d) gland pack rings Op. 01.10.08 Dec. date 19.12.08 - TC 0833614
50
7223.00.00 WIRE, STAINLESS STEEL, cold drawn, bright finished, having BOTH of the following: (a) diameter NOT less than 0.5 mm and NOT greater than 12 mm; (b) conforming to EITHER of the following AISI grades: (i) 302; (ii) 302HQ (302CHQ) Op. 30.09.08 Dec. date 19.12.08 - TC 0833357
50
7326.90.90 STANDS, FLAT SCREEN DISPLAY, freestanding or desk mounted Op. 30.09.08 Dec. date 19.12.08 - TC 0833361
50
8302.50.00 MOUNTINGS, CEILING, flat screen display AND/OR projector Op. 30.09.08 Dec. date 19.12.08 - TC 0833359
50
8304.00.00 FRAMES, SUPPORT, LAPTOP, adjustable, heat ventilated, with or without a polycarbonate top Op. 30.09.08 Dec. date 19.12.08 - TC 0833360
50
8421.21.90 WATER TREATMENT PLANT, comprising ALL of the following: (a) raw water treatment systems; (b) raw water feed tanks; (c) permeate tanks; (d) demineralised water treatment system; (e) demineralised water tanks; (f) reverse osmosis systems; (g) potable water distribution, treatment and storage systems; (h) control systems; (i) chemical storage and dosing systems; (j) condensate filtering system Op. 26.09.08 Dec. date 19.12.08 - TC 0832865
50
8421.99.00 PARTS, HYPERBARIC FILTER, being EITHER of the following: (a) filter troughs;
50
17 TCOs Made Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect
(b) scrapers Op. 03.10.08 Dec. date 19.12.08 - TC 0834035
8425.42.00 INCREMENTAL BRIDGE LAUNCHING SYSTEM, comprising ALL of the following: (a) hydraulic jacks; (b) hydraulic drive units; (c) control units Op. 02.10.08 Dec. date 19.12.08 - TC 0833986
50
8428.90.00 GLASS HANDLING EQUIPMENT, being ANY of the following: (a) hydraulic tiltable transfer tables; (b) horizontal transport tables; (c) vertical remnant plate magazines Op. 25.09.08 Dec. date 19.12.08 - TC 0832748
50
8433.59.90 HARVESTERS, GRAPE, trailed OR self-propelled Op. 08.07.08 Dec. date 22.12.08 - TC 0816640
50
8477.80.00 MILLS, RUBBER AND/OR THERMOPLASTIC, having BOTH of the following: (a) working roll diameter NOT less than 710 mm; (b) working roll length NOT less than 2 200 mm Op. 02.10.08 Dec. date 19.12.08 - TC 0833811
50
8479.89.90 COOLERS AND WARMERS, FOOD AND BEVERIDGE, thermoelectric, portable, having BOTH of the following: (a) power capacity NOT less than 20 W and NOT greater than 40 W; (b) volume NOT greater than 4 litres Op. 30.09.08 Dec. date 19.12.08 - TC 0829223
50
8481.90.90 BELT ASSEMBLIES, PARALLEL SLIDE OR CHECK STEAM VALVE Op. 01.10.08 Dec. date 19.12.08 - TC 0833616
50
8483.40.90 ASSEMBLIES, GEARBOX AND PINION, STEEL STRIP FINISHING MILL Op. 01.10.08 Dec. date 19.12.08 - TC 0833618
50
8483.40.90 GEARBOXES, STEEL STRIP FINISHING MILL Op. 01.10.08 Dec. date 19.12.08 - TC 0833622
50
8483.90.00 PINIONS AND/OR PINION SHAFT, GEARBOX, STEEL STRIP FINISHING MILL Op. 01.10.08 Dec. date 19.12.08 - TC 0833621
50
8502.31.90 GENERATORS, wind powered, having a power rating NOT greater than 750 W, with or without the following: (a) voltage regulators; (b) electromagnetic brake over current protection; (c) battery chargers Op. 02.10.08 Dec. date 19.12.08 - TC 0833964
50
8704.22.00 TRUCKS, CAB CHASSIS, having ALL of the following: (a) compression ignition engine; (b) 4x4 wheel drive; (c) gross vehicle weight NOT less than 15 tonne but NOT greater than 20 tonne; (d) single or dual cab Op. 03.10.08 Dec. date 19.12.08 - TC 0833985
50
18 Local Manufacturer Initiated - TCO Revocation Requests and Local Manufacturer Initiated - TCO Revocation Requests Refused
Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Local Manufacturer Initiated - TCO Revocation Requests
NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT
An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.
The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession Order which will take effect should the application for revocation be successful.
Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an order is backdated to the date of request for revocation.
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Lodgement Request Date
7412.20.00 BRASS FITTINGS, being ANY of the following: (a) wall bayonet quick connect; (b) floor bayonet quick connect; (c) tee junction; (d) elbow; (e) socket; (f) olive; (g) tube bush; (h) extension piece; (i) couplings; (j) union connectors; (k) adapters; (l) compression; (m) capillary fittings; (n) nipples; (o) allthread; Op. 17.10.03 Dec. date 02.01.04 - TC 0313145
50 22.12.08
Local Manufacturer Initiated - TCO Revocation Requests Refused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(1) - REFUSAL TO REVOKE A TARIFF CONCESSION ORDER CUSTOMS ACT 1901
The Request for revocation of the Tariff Concession Order for goods described in the following TABLE has been refused.
WARNING: Requests for internal review by the ACS of decisions to refuse to revoke a Tariff Concession Order (TCO) can be made within 28 days of the date that the decision is published in the Gazette. If at review a decision to revoke the TCO is substituted for the original decision, post warrant action will be taken on any duty short paid through use of the revoked TCO, subject to in transit provisions as provided for in section 269SG of the Customs Act 1901. Details of TCOs affected by decisions to refuse revocation and which are the subject of requests for review by the ACS will be published in the Gazette under the heading "Notification of Request for Review of Decisions".
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification
7305.12.00 PIPE, electric resistance welded, to specification API 5L Grade X70, being EITHER of the following sizes: (a) DN 500, WT 11.2 mm; (b) DN 500, WT 12.2 mm For the purposes of this Order, specification tolerances of + or - 10% are allowable Op. 17.07.08 - TC 0819863
50
19 Local Manufacturer Initiated - TCOs Revoked and Local Manufacturer Initiated - TCOs Revoked and Re-Issued
Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Local Manufacturer Initiated - TCOs Revoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION ORDERS REVOKED
The Tariff Concession Orders for the goods described in the following TABLE have been revoked.
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect
7308.90.00 PILES, TUBULAR, STRUCTURAL STEEL Op. 29.04.08 Dec. date 18.07.08 - TC 0805576 Substitutable goods manufactured in Australia by RPG Australia Pty Ltd, Wacol Qld. In transit provisions apply.
50 06.11.08
7308.90.00 PARTS, STRUCTURAL STEEL SECTIONS, WHARF, being ANY of the following: (a) marine piles; (b) topside modules; (c) dolphins; (d) fenders; (e) crane rails Op. 14.03.08 Dec. date 13.06.08 - TC 0812341 Substitutable goods manufactured in Australia by RPG Australia Pty Ltd, Wacol Qld. In transit provisions apply.
50 06.11.08
Local Manufacturer Initiated - TCOs Revoked and Re-Issued
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(1)&(2) - TARIFF CONCESSION ORDERS REVOKED AND A NEW TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders for the goods described in the following TABLE have been revoked and a new Tariff Concession Orders have been made in respect of the goods described below.
The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods. In-transit provisions apply
THE TABLE
Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect
TCO REVOKED
8504.40.90 INVERTERS, TRACTION, LOCOMOTIVE Op. 13.05.08 Dec. date 01.08.08 - TC 0807948 Tapin Notes: TCO re-issued as 0844723
50 22.12.08
TCO REISSUED
8504.40.90 INVERTERS, TRACTION MOTOR, LOCOMOTIVE, rated output NOT less than 1 000 kW Op. 13.05.08 Dec. date 23.12.08 - TC 0844723
50
20 Customs Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Customs Review of TCO Applications Notification
CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF APPLICATION DECISIONS
A request has been received for review by Customs of the decision made on the application for the Tariff Concession Order for goods described in the following TABLE.
THE TABLE
Description of Goods including the Customs Tariff Classification
Schedule 4 Item Number Date of Lodgement of Request
Initial Decision
8474.20.00 CRUSHING PLANT, consisting of ALL of the following: (a) primary gyratory crushers having a capacity of 5 100 t/hr or greater; (b) belt feeders having an operating capacity of 6 500 t/hr or greater; (c) conveyors having an operating capacity of 13 500 t/hr or greater Op. 10.06.08 - TC 0811919
50 16.12.08
REFUSE
21 AAT Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
AAT Review of TCO Applications Notification
NOTICE OF APPLICATIONS FOR REVIEW OF DECISIONS MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS TRIBUNAL ACT 1975
Applications have been lodged with the Administrative Appeals Tribunal under section 29 of the Administrative Appeals Tribunal Act 1975 for a review of the decision of the Australian Customs Service in respect of the Tariff Concession Orders for the goods described in the following TABLE.
The operative date (Op.) and TC reference number follow the description of goods.
The decision to be reviewed by the Administrative Appeals Tribunal is as nominated following the description of goods.
Subject to the Administrative Appeals Tribunal Act 1975, any person whose interests are affected by the decision under review may apply in writing to the Tribunal to be made a party to the proceedings. Interested persons who do become a party to these proceedings may be able to present evidence and make submissions to the Tribunal and the matter could not be settled by consent without their agreement. The Administrative Appeals Tribunal reference number and location appear against the Tariff Concession.
THE TABLE
Description of Goods including the Customs Tariff Classification
Schedule 4 Item Number
3908.10.00 RESINS, GLASS FILLED POLYAMIDE 6,6, having ALL of the following: (a) density 1 410 kg/m3, having a tolerance of + or - 10%; (b) melt volume flow rate (MVR) 35 cm3/10 minutes, having a tolerance of + or - 20%; (c) 35% glass fibre reinforcement, having a tolerance of + or - 10% Op. 08.02.08 - TC 0802242 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085746 SYDNEY
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
3908.10.00 RESINS, LOW VISCOSITY UNFILLED POLYAMIDE 6,6, having BOTH of the following: (a) density 1 135 kg/m3; (b) relative viscosity 2.72 Tolerances of +10% and -10% are allowable for specifications (a) and b) Op. 08.02.08 - TC 0802327 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085751 SYDNEY
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
3908.10.00 RESINS, UNFILLED POLYAMIDE 6, having BOTH of the following: (a) density 1 130 kg/m3; (b) relative viscosity 2.7 Tolerances of +10% and -10% are allowable for specifications (a) and (b) Op. 08.02.08 - TC 0802328 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085748 SYDNEY
22 AAT Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Customs Tariff Classification
Schedule 4 Item Number
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
3908.10.00 RESINS, UNFILLED POLYAMIDE 6, having ALL of the following: (a) extractables maximum 0.5% (mas/mas); (b) density 1 135 kg/m3; (c) relative viscosity 3.30 Tolerances of +10% and -10% are allowable for specifications (b) and (c) Op. 08.02.08 - TC 0802329 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085747 SYDNEY
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
3908.10.00 RESINS, GLASS FILLED POLYAMIDE 6, having ALL of the following: (a) tensile modulus 9 500/6 200 MPa in dry/conditioned state; (b) density 1 360 kg/m3; (c) melt volume flow rate (MVR) 50 cm3/10 minutes; (d) 30% glass fibre reinforcement; (e) minimum 2 hour maximum service temperature at 200 degrees C; (f) heat distortion temperature of 210 degrees C using a 1.8 MPa load Tolerances of + 10% and - 10% are allowable for specifications (a), (b) and (d). Tolerance of + 20% and - 20% is allowable for specification (c). Op. 29.02.08 - TC 0803434 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085745 SYDNEY
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
3908.10.00 RESINS, GLASS FILLED POLYAMIDE 6, having ALL of the following: (a) tensile modulus 5 800/3 500 MPa in dry/conditioned state; (b) density 1 230 kg/m3; (c) melt volume flow rate (MVR) 75 cm3/10 minutes; (d) 15% glass fibre reinforcement; (e) minimum 2 hour maximum service temperature at 200 degrees celsius; (f) heat distortion temperature of 190 degrees celsius using a 1.8 MPa load Tolerances of + 10% and - 10% are allowable for specifications (a), (b) and (d). Tolerance of + 20% and - 20% is allowable for specification (c). Op. 29.02.08 - TC 0803435 Customs Decision: REFUSE
50
AAT Ref AAT Location
Applicant BASF AUSTRALIA LTD.
S20085743 SYDNEY
23 AAT Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Description of Goods including the Customs Tariff Classification
Schedule 4 Item Number
Under ss.269SHA(3), a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the tribunal allows
24 Section 273 Determinations Made Commonwealth of Australia GazetteNo TC TC09/01, Wednesday, 07 Jan
2009 Section 273 Determinations Made
NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901
Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations applying to goods of a kind specified in the table below.
In the table:
(i) the first column specifies the kind of goods to which the determination applies, any conditions specified in the determination, the commencement and cessation dates of the determination and the Determination reference number;
(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the specified goods.
(iii) ‘AD’ indicates the determination was made by AusIndustry.
(iv) ‘DE’ indicates that the determination was made by Customs
THE TABLE
Description of Goods Dates of Effect
Schedule 4 Item Number
150 wind power generators for a power generation project 19.09.08 to 18.09.10 - AD 01001938
71
3 power and steam generators for a power generation project 19.09.08 to 18.09.10 - AD 01001939
71
3 combined cycle power station heat recovery steam generators for a power generation project 19.09.08 to 18.09.10 - AD 01001940
71
40 gas turbine auxiliary modules for a power generation project 19.09.08 to 18.09.10 - AD 01001941
71
10 steam generation boiler auxiliary plant for a power generation project 19.09.08 to 18.09.10 - AD 01001942
71
10,000 metres steam generation boiler steel pipes for a power generation project 19.09.08 to 18.09.10 - AD 01001943
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001944
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001946
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001947
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001948
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001949
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001950
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001951
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001952
71
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001953
71
25 Section 273 Determinations Made and Section 273 Determinations Revoked
Commonwealth of Australia GazetteNo TC TC09/01, Wednesday, 07 Jan
2009
Equipment for a desalination plant and pipeline project 27.03.08 to 26.03.10 - AD 01001954
71
Fish processing equipment for aquaculture processing expansion 18.09.08 to 30.09.09 - AD 01001956
71
CW3000 Flowtite winder continuous winding GRP pipe machines for use in a GRP piping system plant 10.06.08 to 09.06.10 - AD 01001957
71
Section 273 Determinations Revoked
NOTICE OF REVOCATION OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901
Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the revocation of the determination made under section 273 of the Customs Act 1901, which applied to goods of a kind specified in the table below.
In the table:
(i) the first column specifies the kind of goods to which the determination applied, any conditions specified in the determination, the original commencement date of the determination and the Determination reference number;
(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applied to the specified goods.
(iii) the third column specifies the date of revocation, being the date on which the determination ceases to have effect.
(iv) ‘AD’ indicates the determination was made by AusIndustry.
(v) ‘DE’ indicates that the determination was made by Customs
THE TABLE
Description of Goods Commencement Date
Schedule 4 Item Number
Revocation Date
3 CW3000 Flowtite Winder continuous winding GRP pipe machines for use in a GRP Piping System Plant Op. 10.06.08 - AD 01001925
71 16.12.08
26 Cheese Quota Transfer Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
Cheese Quota TransfersAUSTRALIAN CUSTOMS SERVICE
TARIFF QUOTAS - QUOTA TRANSACTIONS PROCESSED IN THE PERIOD 09 Dec 2008 to 16 Dec 2008.
GENERAL INFORMATION
This Gazette contains details of quota transactions processed in the period 09 Dec 2008 to 16 Dec 2008 inclusive.
Part 1 contains a Table specifying quota category details.
Part 2, Section A, lists quota holders who received quota allocations via transfer transactions.
Part 2, Section B, lists all adjustments to previous allocations which have been caused by transfer transactions.
NB.- In Section B, transactions represent changes to individual tariff quotas and do not necessarily represent the entire holdings in that category for the quota holder.
- The "AS WAS" and "AS IS" columns indicate the quota levels for that particular tariff quota only at the time of that transaction.
- The amount of the transaction can be deduced by subtracting the "AS WAS" column from the "AS IS" column.
Inquiries concerning any information published within this Gazette should be directed to the Trade Branch, Australian Customs Service, Customs House, 5 Constitution Avenue, Canberra City, ACT, 2601.
PART 1
NOTICE OF MAKING A DETERMINATION UNDER PART XVI OF THE CUSTOMS ACT 1901
In pursuance of Section 273B of the Customs Act 1901, notice is hereby given that a Determination specified in Section A of Part 2 was made in relation to a Item 62 in Part III of Schedule 4 to the Customs Tariff Act1995 and subject to any conditions set out hereunder, that Determination applies to goods that are:
(1) specified in the Table hereunder;
(2) classified under a subheading of Schedule 3 to the Customs Tariff Act 1995, specified in Item 62 in Part III of Schedule 4 to the Customs Tariff Act 1995;
(3) entered for home consumption not earlier than the start date, and not later than the finish date, by the person specified in that Determination, as shown in Part 2; and
(4) in total, not in excess of such quantity as is specified in that Determination, as shown in Part 2.
In pursuance of Section 273B of the Customs Act 1901, notice is hereby given that a Determination specified in Section B of Part 2 amended a previous Determination by deleting the figures in the column headed “QUANTITY AS WAS" and inserting the figures in the column headed "QUANTITY NOW IS".
THE TABLE
CATEGORY CODE
UNIT QUANTITY
QUOTA ITEM NUMBER
QUOTA DESCRIPTION
311 Kilograms 61A Cheese & Curd
27 Cheese Quota Transfer Commonwealth of Australia GazetteNo TC 09/01, Wednesday, 07 Jan 2009
PART 2
SECTION A – QUOTA ALLOCATIONS
CAT CODE
QUOTA HOLDERS LEGAL NAME POST CODE
QUANTITY (KG) DETERMINATION NUMBER
PART 2
SECTION B – AMENDED ALLOCATIONS
CAT CODE
QUOTA HOLDERS LEGAL NAME POST CODE
QUANTITY (KG) AS WAS
QUANTITY (KG) AS IS
DETERMINATION NUMBER
311 C LO PRESTI & SON 6158 1,898.00 0.00 000293
311 PERCIVIAL D HARRISON & MARIE L PACKER 3078 82,597.00 84,495.00 000293