Commerical Door Catalog 2009 -...
Transcript of Commerical Door Catalog 2009 -...
September 2009 v2
INDEXPage Section
2 SBC Label Inventory
3 Catalog Ordering Instructions
4 Hollow Metal Door & Steel Lite Kits
5 Hollow Metal Frames: Masonry & Drywall
6 Blank,Blank Slabs; Steel Frame Options & Steel Slab Options
7 Threshold and Frame Components
8 Commercial Wood Doors
9 Commercial Wood Doors & Wood Lite Kits
10 Commercial Hardware and Hinges
11 Von Duprin Hardware & Norton Closers
12 Lawrence Hardware
13 Door Machining Specifications & Lock Prep Specifications
14 Non-Standard Wood Door Machining Worksheet
15 Drywall Frame Installation Instructions
16 Masonry Frame Installation Instructions
17 Adjustable Frame Installation Instructions
18 Commercial Door Handings & Technical Data
19 SBC Quick Price Page
Shuster’s Building ComponentsShuster’s Building ComponentsNationally Recognized Independent Millwork DistributorNationally Recognized Independent Millwork Distributor
COMMERCIAL DOORPRODUCTS
LIST PRICE & SPECIFICATIONSMANUAL
SBC Commercial Catalog 2009 v2Page 2
“NEUTRAL PRESSURE”LABEL INVENTORY - DOORS & FRAMES
DOOR LABELSDOOR LABELS
FRAME LABELSFRAME LABELS
IMPORTANT NOTICE
The above listed items areonly guidelines and do not
encompass all laws regardingfire protection. Please consultthe National Fire ProtectionAssociation or your local FireMarshal for specifics regardinglabeling rules in your area.
FIRE LABELFIRE LABELGUIDELINESGUIDELINES
�
�
�
�
All labeled units assumethe rating of the lowestcomponent. Example: A 90minute wood door in a 20minute frame would have a 20minute rating.All labeled doors suppliedby Shuster’s BuildingComponents are 1-3/4” thick.
All labeled units must havea UL LISTED self closingand UL LISTED positiveself latching device.All presizing and machiningfor hinges, locks and litesmust be done at the factory.Any field machining by anunlicensed individualvoids the fire label.
WARNOCK HERSEYLISTED FIRE DOOR20 MINUTE RATINGSAMPLE NOT VALID
MIN. LATCH THROW - 1/2 INCH
SHUSTER’SBuilding
Components
Irwin, PA15642
SHUSTER’SBuilding
Components
Irwin, PA15642
SHUSTER’SBuilding
Components
Irwin, PA15642
SHUSTER’SBuilding
Components
Irwin, PA15642
WARNOCK HERSEYLISTED FIRE DOOR3/4 HOUR RATINGSAMPLE NOT VALID
MIN. LATCH THROW - 1/2 INCH
WARNOCK HERSEYLISTED FIRE DOOR1 HOUR RATING
SAMPLE NOT VALIDMIN. LATCH THROW - 1/2 INCH
WARNOCK HERSEYLISTED FIRE DOOR20 MINUTE RATING
SAMPLE NOT VALID
MDO NOT REMOVEOR COVER THIS
LABEL
fi
fi
fi
US
fi
MDO NOT REMOVEOR COVER THIS
LABEL
MDO NOT REMOVEOR COVER THIS
LABEL
MDO NOT REMOVEOR COVER THIS
LABEL
Note: Stamped label is above top hinge on every frame.
Note: All fire doors available as neutral pressure only.
CARTEK DOORARTEK DOOR
FDF-CDPCFRATING 1-1/2 HOUR..DUREE
Note: Above is a copy of an embossed label (not actual size).
SHUSTER’SBuilding
Components
Irwin, PA15642
WARNOCK HERSEYLISTED FIRE DOOR1-1/2 HOUR RATINGSAMPLE NOT VALID
MIN. LATCH THROW - 1/2 INCH
fiM
DO NOT REMOVEOR COVER THIS
LABEL
SBC Commercial Catalog 2009 v2Page 3
CATALOG ORDERING INSTRUCTIONS“EASY PRICE PROCESS”
STEPS DESCRIPTION1. SELECT DOOR TYPE & SIZE
Steel...................................................................... PAGE 4
Wood..................................................................... PAGE 8
2. SELECT FRAME
Masonry, Drywall, Wood or Split............................. PAGE 5
3. SELECT HANDING PAGE 19
4. DO YOU WANT LITES OR LOUVER?
Wire glass or clear tempered................................ PAGE 4
Non rated plastic lite frame..................................... PAGE 4
Non rated hardwood lites...................................... PAGE 9
Metal louvers......................................................... PAGE 4
Wood louvers ....................................................... PAGE 9
5. DO YOU WANT A SILL OR WEATHERSTRIP? PAGE 7
6. WHAT HINGES DO YOU WANT? PAGE 10
7. DO YOU WANT ANY OTHER HARDWARE?
Lockset.................................................................... PAGE 10
Push/Pulls............................................................... PAGE 10
8. DO YOU WANT A CLOSER?
Norton.................................................................... PAGE 11
Lawrence............................................................... PAGE 12
9. DO YOU WANT AN EXIT DEVICE?
Von Duprin............................................................. PAGE 11
Lawrence............................................................... PAGE 12
10. MISC. HARDWARE NEEDS OR BUILT UP UNIT
Steel Doors............................................................ PAGE 6
Wood Doors.......................................................... PAGE 9
Surface Bolt or Viewers............................................ PAGE 10
EASY PRICE PROCESSEASY PRICE PROCESS
SBC Commercial Catalog 2009 v2Page 4
COMMERCIAL STEEL DOORS
1-3/4” 18 GAUGE EDGE GALVANNEAL DOORS1-3/4” 18 GAUGE EDGE GALVANNEAL DOORSSize Style List Leadtime Size Style List Leadtime
2/0 x 6/8 Flush $485 3 Weeks 2/0 x 7/0 Flush $515 3 Weeks2/4 x 6/8 Flush 495 3 Weeks 2/4 x 7/0 Flush 520 3 Weeks2/6 x 6/8 Flush� 515 STOCK 2/6 x 7/0 Flush� 545 STOCK2/8 x 6/8 Flush� 515 STOCK 2/8 x 7/0 Flush� 545 STOCK3/0 x 6/8 Flush� 545 STOCK 3/0 x 7/0 Flush� 580 STOCK3/6 x 6/8 Flush 645 STOCK 3/6 x 7/0 Flush 670 STOCK4/0 x 6/8 Flush� 685 STOCK 4/0 x 7/0 Flush� 735 STOCK3/0 x 6/8* 6 Panel� 620 STOCK 3/0 x 7/0* 6 Panel 655 3 Weeks
Cylindrical prep only - All other preps require extended leadtimes.� Panic reinforced in stock
All doors above, unless noted, are available with cylindrical lock prep or mortise pocket with blank face. Other preps are available but mayrequire extended leadtimes. **Stock doors above have cylindrical lock prep.**
STOCK LITE KITS INSTALLED IN DOORSSTOCK LITE KITS INSTALLED IN DOORSMetal kits include wire glass in fire rated or 1/4” clear tempered glass in non-fire rated door.
Note the Following:�� Building code changes DO NOT permit the use of wire glass in school
K-12 grades nor in any sporting facilities. In these cases, doors will ship open - no glass.�� *Plastic lite frame, 1/2” insulated glass.
�� “Superlite-W” Wire glass complies with CPSC 16CFR 1202 CAT IT, Requiring withstanding 400LBS of impact.
HM-V HM-NL-3 HM-NL4 HM-NL5 HM-G HM-LV HM-LVL HM-4 HM-6 HM-9 HM-1210 X 10 3 X 33 4 X 24 5 X 20 16 X 24 20 X 12 24 X 24 22 X 36 8 X 36 22 X 64 7.5 X 18.5
18 X 2422 X 24
Style Max.Label
Lite Size Wire GlassPrice
Clear TemperedPrice
V B 90 Min. 10 x 10 $270 $180NL3 B 90 Min. 3 x 33 510 240NL4 B 90 Min. 4 x 25 408 220NL5 B 90 Min. 5 x 20 338 2102/6 G C 45 M 16 x 24 945 2952/8 G C 45 M 18 x 24 945 2953/0 G C 45 M 22 x 24 945 295
Available in “Superlite-W” Wire Glass Available in Clear Tempered Glass
Metal Louvers Plastic Lip Lites
Style Max. Label Lite Size Price
LV -- 20 x 12 lvr $170LVL B 90 M 24 x 24 lvr 640
Style Max. Label Lite Size PriceHM4 IG* X 22 X 36 $168HM6 IG* X 8 X 36 150HM9 IG* X 22 X 64 230HM12 IG* X 7.5 X 18.5 172
1
4
* Can be used on Masonry or Drywall applications.* Adjustable frames are punched/dimpled on sides of frame for easy installation.* Come with flat head tapcon fastners. (16 on singles) (18 on doubles)
TRADITIONAL STOCK FRAME PRICINGTRADITIONAL STOCK FRAME PRICING
SBC Commercial Catalog 2009 v2Page 5
COMMERCIAL FRAME SETS
5-3/4”Masonry
5-5/8” Drywall
5-7/8”Drywall
x 6/82/6, 2/8, 3/0 $212 $244 $2443/6, 4/0 single 221 260 2605/0, 5/4, 6/0 255 280 280
x 7/02/6, 2/8, 3/0 $237 $258 $2583/6, 4/0 single 249 279 2795/0, 5/4, 6/0 281 295 295
ANCHORS MUST BE ADDED TO ABOVE FRAMES.Steel frames require 4-7/8” strike - sold separately (SEE Page 6).
Note: 5-3/4” frame is standard product regardless of masonry block width.Masonry 4” Head..................................................................................................................................Masonry Wire Anchors (6) per frame...................................................................................................
(3/0) $67 (4/0) $8648
Wood or Steel Stud Anchors (6) per frame.......................................................................................... 20Existing Masonry Stud Anchors (8) per frame(consisting of expansion shield bolts and hole plugs)
Frame drilled........................................................................................................ 110Frame not drilled................................................................................................. 80
ADJUSTABLE STOCK FRAME PRICINGADJUSTABLE STOCK FRAME PRICING
NOTE: All frames have 1-1/2 hour fire rating.
2
2
4-1/2 - 6” Small
5-5/8 - 9” Medium
9 - 13”Large
x 6/82/6, 2/8, 3/0 $320 400 5003/6, 4/0 single 340 425 5675/0, 5/4, 6/0 358 450 600
x 7/02/6, 2/8, 3/0 345 425 5253/6, 4/0 single 365 450 5925/0, 5/4, 6/0 383 475 625
WOOD FRAME PREHUNG OPTIONSWOOD FRAME PREHUNG OPTIONS5/4” Primed fingerjoint rabbited jamb w/ NO sill and Q-lon compression
weatherstrip; w/ US3-4 ball bearing hingesSingle Double Single Double3/0 x 7/0Max
6/0 x 7/0Max
3/0 x 7/0Max
6/0 x 7/0Max
3-1/4” - 4-9/16” $183 $238 For 20 min label on singleframes up to 6-9/16”4-5/8” - 6-9/16” 230 297
6-5/8” - 8-9/16” 267 346 For WP 20 min. framesup to 4-13/16”Add for Brickmould 40 49
Rough opening is nominal door size plus 2-1/2 in width and 1-1/2” in height.The rough opening allows for use of OPTIONAL 1/2” high ADA threshold.
$10
210 N/A
NOTE: MASONRY ROUGH OPENING IS NOMINAL DOOR SIZE PLUS 4-1/4” IN WIDTH AND 2-1/8” IN HEIGHT.
NOTE: DRYWALL ROUGH OPENING IS NOMINAL DOOR SIZE PLUS 2” IN WIDTH AND 1” IN HEIGHT.Rough Openings
N/A
2
NEW NEW ITEMITEM
SBC Commercial Catalog 2009 v2Page 6
COMMERCIAL STEEL DOORS
Compression AnchorAssembly (Standard) Universal Steel
Frame AnchorWire MasonryAnchor
STEEL FRAME OPTIONS & MISCELLANEOUS PARTSSTEEL FRAME OPTIONS & MISCELLANEOUS PARTSDescription Catalog # List Description Catalog # List
Mortise lock conversation plate MLCP $24 Masonry wire anchors MWA $84-7/8” strike plate 478SFP 10 EMA snap in hole plug EMAHP 1
Comm. door lock edge filler plate CDLEFP 10 EMA 4” dynabolt EMADB 3Door hinge handing plate DHHP 1 Door silencer (each) DS 1
Mortise lock edge filler gov’t 86 MLEF 10 Universal steel frame USFA 6Dust Proof Strike #570 10B DS10B 14 Deadbolt strike filler plate DDSFP 4
Dust Proof Strike #570 US26D DS26D 14 Double Door Strike 26D DDS26D 47#1672 Coordinator (Primed Black) 1672CO 75 Double Door Strike 40D DDS40D 47
INSTALLATION SERVICESINSTALLATION SERVICES
�Egress Doors may not have a deadbolt.
*Charge applies only if closer/exit device is not purchased at time of order.
10
10Service List Price Service List Price
Frame SlabBuilt up unit (not welded) Masonry Only $75 *Prep for closer $55Built up/ back weld corners Masonry Only 188 *Prep for viewer 38
Built up/ face weld and grind frame 300 Steel astragal installed 225Reinforce for closer 50 Steel astragal w/ flushbolt 375
Special hardware locations (not hinges) 225 Reduce door height (4” Max) per slab 225Reduce frame height 113 *Prep for exit device rim 22,5510,8810 75
Thimble strike 30 *Prep for exit device vr 2227, 5530, 8830 75*Prep for exit device 88 335*Prep for exit device 99 225
�Deadbolt bore (standard location) 50Deadbolt bore thru push/pull plate 60
BLANK BLANK SLABSBLANK BLANK SLABS6/8 7/0
Size Style Size Cat # Price Size Cat # Price2/0 Flush 23-3/4 x 79-1/8 2068HMFBB $644 23-3/4 x 83-1/8 2070HMFBB $6642/6 Flush 29-3/4 x 79-1/8 2668HMFBB 644 29-3/4 x 83-1/8 2670HMFBB 6642/8 Flush 31-3/4 x 79-1/8 2868HMFBB 644 31-3/4 x 83-1/8 2870HMFBB 6643/0 Flush 35-3/4 x 79-1/8 3068HMFBB 777 35-3/4 x 83-1/8 3070HMFBB 7903/2 Flush 37-3/4 x 79-1/8 3268HMFBB 777 37-3/4 x 83-1/8 3270HMFBB 7903/4 Flush 39-3/4 x 79-1/8 3468HMFBB 777 39-3/4 x 83-1/8 3470HMFBB 7903/6 Flush 41-3/4 x 79-1/8 3668HMFBB 777 41-3/4 x 83-1/8 3670HMFBB 7903/8 Flush 43-3/4 x 79-1/8 3868HMFBB 888 43-3/4 x 83-1/8 3870HMFBB 9084/0 Flush 47-3/4 x 79-1/8 4068HMFBB 888 47-3/4 x 83-1/8 4070HMFBB 908
Machine to any hinge/strike locations..................Add $400
SBC Commercial Catalog 2009 v2Page 7
WEATHERSTRIP, THRESHOLDS & FRAME COMPONENTSWEATHERSTRIP, THRESHOLDS & FRAME COMPONENTS
ASTRAGAL CROSS SECTIONSASTRAGAL CROSS SECTIONS Z ASTRAGALZ ASTRAGAL
COMMERCIAL FRAME COMPONENTS
5Description Catalog # List Description Catalog # List
2/6 Barrier free threshold 4", #424 26B424 $33 3/0 Barrier free threshold 6", #426 30B426 $722/8 Barrier free threshold 4", #424 28B424 36 6/0 Barrier free threshold 6", #426 60B426 1443/0 Barrier free threshold 4", #424 30B424 40 3070 Commercial weatherstrip set 3070CWS 36
3/0 Barrier free 5", #S282A 30S282A 80 6070 Commercial weatherstrip set 6070CWS 443/6 Barrier free 5", #S282A 36S282A 92 3/0 Commercial door sweep 30CDS 166/0 Barrier free 5", #S282A 60S282A 152 4/0 Commercial door sweep 40CDS 22
140 PA Astragal set 140PA70A 300
MASONRYDescription Catalog # 6/8 List Catalog # 7/0 List
3/0 Commercial head jamb 5-3/4" 30CHJ $46 -- --3/0 4” Commercial head jamb 5-3/4" 30CHJ4 67Commercial hinge jamb LH 5-3/4" 68CHJL 90 70CHJL $102Commercial strike jamb LH 5-3/4" 68CSJL 76 70CSJL 89Commercial hinge jamb RH 5-3/4" 68CHJR 90 70CHJR 102Commercial strike jamb RH 5-3/4" 68CSJR 76 70CSJR 89
DRYWALL3/0 DW head jamb 5-5/8" 30DWHJ558 48Commercial DW hinge jamb LH 5-5/8" 68CDWHJL558 104 70CDWHJL558 111Commercial DW strike jamb LH 5-5/8" 68CDWSJL558 92 70CDWSJL558 99Commercial DW hinge jamb RH 5-5/8" 68CDWHJR558 104 70CDWHJR558 111Commercial DW strike jamb RH 5-5/8" 68CDWSJR558 92 70CDWSJR558 993/0 DW head jamb 5-7/8" 30DWJ 48Commercial DW hinge jamb LH 5-7/8" 68CDWHJL 104 70CDWHJL 111Commercial DW strike jamb LH 5-7/8" 68CDWSJL 92 70CDWSJL 99Commercial DW hinge jamb RH 5-7/8" 68CDWHJR 104 70CDWHJR 111Commercial DW strike jamb RH 5-7/8" 68CDWSJR 92 70CDWSJR 99
SPLITSPLIT3/0 SPLIT head jamb SMALL (4-1/2” - 6”) 30CSHJSM 68Commercial SPLIT hinge jamb LH SMALL 68CSHJLSM 134 70CSHJLSM 149Commercial SPLIT strike jamb LH SMALL 68CSSJLSM 118 70CSSJLSM 128Commercial SPLIT hinge jamb RH SMALL 68CSHJRSM 134 70CSHJRSM 149CommercialSPLIT strike jamb RH SMALL 68CSSJRSM 118 70CSSJRSM 1283/0 SPLIT head jamb MEDIUM (5-5/8” - 9”) 30CSHJMED 84Commercial SPLIT hinge jamb LH MEDIUM 68CSHJLMED 168 70CSHJLMED 182Commercial SPLIT strike jamb LH MEDIUM 68CSSJLMED 148 70CSSJLMED 159Commercial SPLIT hinge jamb RH MEDIUM 68CSHJRMED 168 70CSHJRMED 185CommercialSPLIT strike jamb RH MEDIUM 68CSSJRMED 148 70CSSJRMED 1593/0 SPLIT head jamb LARGE (9 - 13”) 30CSHJLG 105Commercial SPLIT hinge jamb LH LARGE 68CSHJLLG 210 70CSHJLLG 225Commercial SPLIT strike jamb LH LARGE 68CSSJLLG 185 70CSSJLLG 195Commercial SPLIT hinge jamb RH LARGE 68CSHJRLG 210 70CSHJRLG 225CommercialSPLIT strike jamb RH LARGE 68CSSJRLG 185 70CSSJRLG 195
TRADITIONALTRADITIONAL
z
SBC Commercial Catalog 2009 V1Page 8
COMMERCIAL WOOD DOORS
Size/Species ParticleCore 6/8
ParticleCore 7/0
ParticleCore 8/0
20 Min.6/8
20 Min.7/0
90 Min.6/8
90 Min.7/0
H.C6/8
H.C7/0
1-3/4” BIRCH2/0 152 171 * 191 206 * * 117 1432/4 166 183 * 180 193 551 555 125 1382/6 166 184 * 180 193 551 555 125 1382/8 171 191 * 185 198 565 577 130 1422/10 183 200 248 194 208 597 611 132 1453/0 183 202 248 194 208 597 611 132 1453/4 301 301 * 312 329 817 863 194 2063/6 262 301 * 312 329 817 863 194 2064/0 262 301 322 319 337 839 869 227 239
1-3/4” OAK2/0 161 174 * 200 215 * * 139 1522/4 177 191 * 191 205 662 691 130 1412/6 177 198 * 191 205 662 691 130 1412/8 199 211 * 203 217 569 593 134 1452/10 205 219 290 211 225 597 622 138 1503/0 205 219 290 211 225 597 622 138 1503/6 294 304 * 347 263 862 907 267 2814/0 294 313 354 354 374 892 929 278 290
1-3/4” PR HARDBOARD2/0 137 150 * 154 164 * * 93 1082/4 123 164 * 158 175 654 698 99 1142/6 123 164 * 158 175 654 698 99 1142/8 128 167 * 164 181 659 703 102 1172/10 133 174 * 171 187 666 710 106 1203/0 133 174 * 171 187 666 710 106 1203/6 256 274 * 269 287 715 758 167 1824/0 261 282 * 277 299 735 779 176 193
1-3/4” IMPERIAL OAK2/0 165 181 * 178 195 * * 90 1142/4 144 186 * 182 199 691 725 99 1222/6 �144 186 * 182 199 691 725 99 1222/8 �148 188 * 185 202 695 738 103 1272/10 153 198 * 196 213 705 749 109 1333/0 �153 198 * 196 213 705 749 109 1333/6 316 333 * 330 346 802 846 165 1894/0 322 389 * 338 358 826 869 179 209
1-3/4” PRIMED MOULDED (NO COMMERCIAL HARDWARE)�2/0 200 248 * 213 261 * * 116 173�2/4 220 255 * 233 268 �649 �680 121 181�2/6 220 255 * 233 268 �649 �680 121 181�2/8 227 258 * 241 271 �654 �687 126 185�2/10 232 263 * 248 277 �663 �697 129 190� 3/0 232 263 * �248 277 �663 �697 129 190
1-3/4” COMMERCIAL 6 PANEL SMOOTH (WIDE STYLE & RAIL)2/6 313 328 * 327 343 �700 �732 229 2732/8 316 332 * 332 348 �705 �736 238 2773/0 320 336 * 336 354 �715 �746 248 2923/6 395 421 * 409 436 �874 �905 276 320
WOOD DOOR SLAB OPTIONS WOOD DOOR SLAB OPTIONS
�=1-3/4” 6 Panel Textured Only
�=Available in Regency Walnut or Imperial Oak (Specify)�No special widths -must use 2-3/8” backset.
NOTE: ADD 20% FOR NON-STOCK ITEMSWHEN ORDERING LESS THAN 5 OF SIZE & KIND
1
*=call for pricingNotes: 1. All unshaded doors 2-3 week leadtime.2. All 1-3/4” fire doors are pe-fit 3/16” in width and 7/8” in height andmachined for 1-1/2 pair hinges and cylindrical lock.3. For pairs of doors, double single door price and add $50 for wood astragal. (For metal astragal, Add $225-fire doors)4. For FB3 Flush Bolt, ADD $50 each.
= 1 week leadtime. �=60 min. Only (90 min. N/A)
SBC Commercial Catalog 2009 v2Page 9
COMMERCIAL WOOD DOORS
WOOD DOOR ADD-ONSWOOD DOOR ADD-ONST= TEMPLATE REQUIRED BY CUSTOMERT= TEMPLATE REQUIRED BY CUSTOMER
Lock prep 3C, 6C, 8C, 9CN/C Special double cylindrical lock prep
Call OfficeT
86C mortise pocket Gov’t 86 36Prep for viewer 38
Mortise lock with function 60T Non-fire rated flush doors
reduce in height or width77
(per panel) Double lock 667, 337, 867, 937 29 80C w/ thrubolt holes 9 T
Flush Bolt #557 prep 100
NON-FIRE RATED HARDWOOD LITESNON-FIRE RATED HARDWOOD LITESWITH 1/8” TEMPERED GLASSWITH 1/8” TEMPERED GLASS
Description DescriptionCWS-109F (10” x 10”) 48 CWS-9 IG 20” x 64” insulated 450
CWS-41 (20” x 12” louver) 144 CWS-9 IG 20” x 64” O open (for 1/4” glass) 245
2/6 x 2/8 CWS-300 (20” x 36”) 152 CWS-17 (20” x 24”) 116
3/0 & up CWS-300 (24” x 36”) 250 Special size cut-out w/ hardwood bead 300
CWS-104 (4” x 24”) 56 Special Lite location 48
CWS-400 10” x 40” 117 Special Louver location 48
CWS 109F CWS 41 CWS 300 CWS 104F CWS9 IGIG glass supplied by SBC
CWS9 OOpen for 1/4”glass suppliedby others
CWS 17 CWS 400
10” X 10” 20” X 12” 24” X36” 4”X 24” 20” X 64” 20” x 64” 20” x 24” 10” x 40”
LITE KITS INSTALLED IN DOORS SEE PAGE 4
IF USING STEEL LITE FRAME, REFER TO PAGE 4 FOR STEEL LITE KITS.
10
4
SBC Commercial Catalog 2009 v2Page 10
STOCK LOCKSETS, HINGES & HARDWARE
DESCRIPTION
LEVER (-L) BALL (-B)FINISH FINISH
US3 US10B US26D US3 US10B US26DEntrance LH5304 (-L or -B) $120 $120 $115 $110 $110 $100Passage LH5301 (-L or -B) 115 115 110 105 105 95Privacy LH5322 (-L or -B) 117 117 112 107 107 97
Classroom LH5305 (-L or -B) 120 120 115 110 110 100Store Room LH5307 (-L or -B) 120 120 115 110 110 100Half Dummy LH5300 (-L or -B) 75 75 68 50 50 45
LAWRENCE LOCKSETSLAWRENCE LOCKSETS
DESCRIPTION US3 US10 US26D USP4-1/2” X 4-1/2” 1279 Plain Bearing 11 11 11 11
4-1/2” X 4-1/2” 1279 Plain Bearing NRP 14 14 14 144-1/2” X 4-1/2” 1279 Ball Bearing 18 18 18 18
4-1/2” X 4-1/2” 1279 Ball Bearing NRP 20 20 20 204-1/2” X 4-1/2” 1250 Spring 26 26 26 26
HINGESHINGES
DESCRIPTIONFINISH
US3 US10 US28#70 Push Plate 39 42 22
#110 x 70 Pull & Plate 180 186 666 x 28” Kick Plate 36 114 366 x 30” Kick Plate 40 126 406 x 34” Kick Plate 46 136 46#555 12” Flushbolt N/A 42 42#557 Flushbolt N/A 63 63
#43 - 36” Push/Pull* N/A N/A 330
HARDWAREHARDWARE Push & Pull Bar
Pull Plate
Push Plate
#453 Surface Bolts- installed
�Installed top and bottom w/ thrubolts.�Can be used on inactive door ofpair of double doors.
Note: Must specify with or withoutsill for location of bottom bolt.
US10 US26D#453 x 8” (set of 2) 120 120
*Item to be discontinued when stock is depleted. For deadbolt bore thru push & pull add: $60
U-700 US4 or US26D(standard location)
70
(Non-standardlocation)
90
Prep OnlyStandard location from
floor 61”
38
VIEWERSVIEWERS
Lever Ball
*Locksets come with Schlage Type C Keyway
6
7
10
7
2-3/8” Backset (238CBS)....Add $9.00
FINISH
Key charge for any lockset....Add $28.00
SBC Commercial Catalog 2009 v2Page 11
STOCK CLOSERS & PANIC HARDWARE
Key UnlocksKnob22K
Key UnlocksLever22L
Key Locks Thumbpiece
22TP
Norton CloserSprayedAlum.
SprayedBronze
1601 312 312
1601 H 312 312
1601 BF 312 312
1601 HBF 360 360
CLOSERCLOSERNorton 1600Closer
Lever
88L
SP28 SP313 US4 US26D22EO Exit Only $640 $640 88EO Exit Only $1414 $171022K Knob Trim 991 991 88NL Night Latch 1600 179522L Lever Trim 984 984 88TP Thumb Piece Trim 1580 200422TP Thumb Piece Trim 954 954 8827 Vertical Rod DT 2136 25122227 Vertical Rod EO 1099 1099 99EO Exit Only 2004 N/A2227 Vertical Rod K 1446 1446 99TP Thumb Piece Trim 2308 N/A2227 Vertical Rod L 1440 1440 99L Lever Trim 1650 N/A2227 Vertical Rod TP 1410 1410 88L Lever Trim 1670 2094
Fire Rated Von Duprin 22...............................................$260
VON DUPRIN HARDWAREVON DUPRIN HARDWARE
For labeled wood door units and labeled 20 guage reinforced hollow metal door units, priceincluded: sex bolts installed and #D951 rim cylinder piece device.
High Traffic Type 88Active or Inactive
High Traffic Type 99Active Door
Low Traffic Type 227Active or Inactive
Low Traffic Type 22
9
8FINISH # FINISH
SP28 ALUMINUM
SP313B BRONZE
US4 DULL BRASS
US26D DULL CHROME
SBC Commercial Catalog 2009 v2Page 12
It is recommended thatvertical rod panic devicesbe used on all pairs of
egress doors.
LOW TRAFFIC DEVICESLOW TRAFFIC DEVICES
CLOSERSCLOSERS
HIGH TRAFFIC DEVICESHIGH TRAFFIC DEVICES
High Traffic Type 8830Active or Inactive
High Traffic Type 8810
Low Traffic Type 5530Active or Inactive
Low Traffic Type 5510
LAWRENCE HARDWARELAWRENCE HARDWARE
DESCRIPTION LOW TRAFFIC
ALUM BronzeStandard Closer 5036 $180 $180825 Closer 825 200 200
Hold open arm c825 ARM41-825 45 45HIGH TRAFFIC
High Traffic Closer 8106 250 250Hold open arm 8106 ARM41 60 N/AParallel arm drop plate DPPA35 40 N/ACushion arm stop CSA40 40 N/A
STOCK LAWRENCE HARDWARE
*Locksets come with Schlage Type C Keyway
L01A
SF Series
DESCRIPTION US3 US26
Plated arm & coverfor 8106 Closer
$250 $250
MISC.MISC.
9
9
8
Note: Must use high traffic exits with high traffic trim and low traffic exits with low traffic trims.
DESCRIPTION DESCRIPTION US3 US10B 626 US3 US10B US32D
Rim, non-fire rated 8810S-RD $670 $670 $600 Key in entrance w/ esc LO1A N/A N/A $200
Surface vert rod, non-fire rated 8830S-RD 870 870 800 Key in lever entrance SF804 $190 $190 190
Rim, fire rated 8810F-ND 770 770 700 Key in lever store room SF807 190 190 190
Surface vert rod, fire rated 8830F-ND 920 920 850 Key in lever passage SF801 170 170 170
Rim, non-fire rated 8810F-ND-48 870 870 800 Key in lever dummy F800 N/A N/A N/A
Surface vert rod, non-fire rated 8830F-ND-48 970 970 900
DESCRIPTION DESCRIPTION628 US32D 630
Rim, non-fire rated 5510S-RD $350 Key in entrance w/ esc LO1A $200 N/ASurface vert rod, non-fire rated 5530S-RD 440 Key in lever entrance S804 N/A $180Rim, fire rated 5510F-ND 500 Key in lever store room S807 N/A 180Surface vert rod, fire rated 5530F-ND 600 Key in lever passage S801 N/A 160Rim, non-fire rated 5510F-ND-48 480 Key in lever dummy F800 N/A 160Surface vert rod, non-fire rated 5530F-ND-48 520
EXIT TRIM
EXIT TRIM
FINISH # FINISH
US3 BRASS
US10B BRONZE
US32D STAINLESS
626 STAINLESS
628 ALUMINUM
630 STAINLESS
*Key charge for any trim device....Add $28.00
SBC Commercial Catalog 2009 v2Page 13
DOORPR
EPNUMBER
FRAMEOPENINGHEIGHT
HEADCLEARANCES
ACTUALDOORHEIGHT
STANDARDUNDERCUT/RUG
CLEARANCE
MORTISEDEPTH
FORHINGE
HINGEBACKSETONDOOR
TOPOFDOOR/ TOPOF1ST
HINGE
TOPOFDOOR/ TOPOF2ND
HINGE
TOPOFDOOR/ TOPOF3RD
HINGE
TOPOFDOORTOCENTERLINE
OFLO
CATION(A115.2)
DOORUNDERSIZINGINWIDTH
NOMINALSTRIKESIDE
CLEARANCE
NOMINALHINGESIDE
CLEARANCE
30BEVEL
DR 15 Steelcraft 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 7-3/8” 37-5/16” 67-1/4” 39-9/16” 3/16” 1/8” 1/16” x
DR 16 Steelcraft 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 7-3/8” 39-5/16” 71-1/4” 43-9/16” 3/16” 1/8” 1/16” x
DR 17 CECO 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 6-5/8” 37-5/8” 68-5/8” 38-1/16” 3/16” 1/8” 1/16” x
DR 18 CECO 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 6-5/8” 39-5/8” 72-5/8” 42 -1/6” 3/16” 1/8” 1/16” xDR 19 Fenestra 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 5-1/8” 35-1/8” 65-1/8” 39-9/16” 3/16” 1/8” 1/16” xDR 20 Fenestra 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 5-1/8” 37-1/8” 69-1/8” 43-9/16” 3/16” 1/8” 1/16” xDR 23 Mesker 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 4-7/8” 35-1/8” 65-3/8” 39-9/16” 3/16” 1/8” 1/16” xDR 24 Mesker 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 4-7/8” 37-1/8” 69-3/8” 43-9/16” 3/16” 1/8” 1/16” xDR 25 Republic 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 7-3/8” 37-5/16” 67-1/4” 39-9/16” 3/16” 1/8” 1/16” xDR 26 Republic 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 9-3/8” 39-5/16” 69-1/4” 43-9/16” 3/16” 1/8” 1/16” x
DR 27 Amweld orARTEK
6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 3/16” 7-3/8” 37-5/16” 67-1/4” 39-9/16” 3/16” 1/8” 1/16” x
DR 28 Amweld orARTEK
7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 3/16” 7-3/8” 39-5/16” 71-1/4” 43-9/16” 3/16” 1/8” 1/16” x
DR 29 Builders/orPioneer
6/8 1-3/4” 80” 1/8” 79-1/8” 5/8” .134 1/4” 4-7/8” 35-1/8” 65-3/8” 41-7/8” 3/16” 1/8” 1/16” x
DR 30 Builders/orPioneer
7/0 1-3/4” 84” 1/8” 83-1/4” 5/8” .134 1/4” 4-7/8” 37-1/8” 69-3/8” 45-7/8” 3/16” 1/8” 1/16” x
DR 31 Curries 6/8 1-3/4” 80” 1/8” 79-1/4” 5/8” .134 1/4” 4-7/8” 35-1/8” 65-3/8” 39-7/8” 3/16” 1/8” 1/16” xDR 32 Curries 7/0 1-3/4” 84” 1/8” 83-1/8” 5/8” .134 1/4” 4-7/8” 37-1/8” 69-3/8” 43-7/8” 3/16” 1/8” 1/16” xDR 33 Dittco 6/8 1-3/4” 80” 1/8” 79-1/4” 3/4” .134 5/16” 4-7/8” 35-1/8” 65-3/8” 39-9/16”” 3/16” 1/8” 1/16” xDR 34 Dittco 7/0 1-3/4” 84” 1/8” 83-1/4” 3/4” .134 5/16” 4-7/8” 37-1/8” 69-3/8” 43-9/16”” 3/16” 1/8” 1/16” xDR 39 Timely 6/8 1-3/4” 80-3/16” 1/8” 79-1/8” 13/16” .134 1/4” 8-316” 37-11/16” 67-3/16” 40” 3/16” 1/8” 1/16” xDR 40 Timely 7/0 1-3/4” 84-3/16 1/8” 83-1/8” 13/16” .134 1/4” 8-316” 39-11/16” 71-3/16” 44” 3/16” 1/8” 1/16” xDR 43 Redi Frame 6/8 1-3/4” 80-3/16” 1/8” 79-1/8” 13/16” .134 1/4” 8-316” 37-11/16” 67-3/16” 40” 3/16” 1/8” 1/16” xDR 44 Redi Frame 7/0 1-3/4” 84-3/16 1/8” 831/8” 13/16” .134 1/4” 8-316” 39-11/16” 71-3/16” 44” 3/16” 1/8” 1/16” xDR 45 Fleming 6/8 1-3/4” 80” 1/8” 79-1/8” 3/4” .134 1/4” 7-3/8” 37-5/16” 67-1/4” 39-9/16”” 3/16” 1/8” 1/16” xDR 46 Fleming 7/0 1-3/4” 84” 1/8” 83-1/8” 3/4” .134 1/4” 7-3/8” 39-5/16” 71-1/4” 43-9/16”” 3/16” 1/8” 1/16” x
SpecificationLock Preps
Backset Latch Face Height
Latch Face Width
Corner Conditions
Face bore Edge Hole Strike Height Strike Bore CornerConditions
Prep #3 C 2-3/8” 2-1/4” 11/8” Square 2-1/8” 1” 47/8” 1” SquarePrep #3 HM 2-3/8” 2-1/4” 11/8” Square 2-1/8” 1” 23/4” 1” SquarePrep #6 C 2-3/4” 2-1/4” 11/8” Square 2-1/8” 1” 47/8” 1” SquarePrep #6 HM 2-3/4” 2-1/4” 11/8” Square 2-1/8” 1” 23/4” 1” SquarePrep #8 C 2-3/4” 2-1/4” 11/8” Square 15/8” 1” 23/4” 1” SquarePrep #9 C 2-3/8” 2-1/4” 11/8” Square 15/8” 1” Thmbl. Strk 1” SquarePrep #80 C 2-3/4” 2-1/4” 11/8” Square 21/8” 1” 47/8” 1” Square
Note Prep 80C includes thrubolt holes. Please supply lock template.Prep #21 C Prep For 88TP Panic DevicePrep #22 C Prep For 88NL Panic DevicePrep #23 C Prep For 88EO Panic DevicePrep #24 C Prep For 8827 Panic DevicePrep #25 C No lock preparation Except edge prep on Door w/ Filler PlatesPrep #30 C Prep For 99EO-F Panic DevicePrep #31 C Prep For 99TP-F Panic DevicePrep #33 C Prep 22K Panic DevicePrep #34 C Prep For 22EO Panic DevicePrep #35 C Prep For 2227 Panic DevicePrep #36 C Prep For 22TP Panic DevicePrep #86 C Prep Std. Gov’t 86 Mortise Pocket Only (No Function Holes)Prep #666 C Prep #6 C Prep #667 C Prep #6 C Over Prep #6 C 7-11/16” Centerline +Prep #337 C Prep # 3 C Over Prep #3 C 7-11/16” Centerline +Prep #867 C Prep #8 C Over Prep #6 C 7-11/16” Centerline +Prep #937 C Prep #9 C Over Prep #3 C 7-11/16” Centerline +
LOCK PREP SPECIFICATIONLOCK PREP SPECIFICATION
STANDARD WOOD DOOR MACHINING LOCATIONSSTANDARD WOOD DOOR MACHINING LOCATIONS
MACHINING LOCATIONS- Lock PrepsRevised 3-09
+THIMBLE STRIKE USED AT DEADBOLT LOCATION ON THIS PREP
Over Prep #6 C 6” Centerline + (Steel Doors Only)
SBC Commercial Catalog 2009 v2Page 14
SBC Commercial Catalog 2009 v2Page 15
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2Page 16
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2Page 17
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2Page 18
COMMERCIAL DOOR HANDINGCOMMERCIAL DOOR HANDING 3
(RHRA) (LHRA)
Polystrene Core�1-3/4” polystrenecomposite construction.�All reinforcing boxescontain polystyrene.�Flat or 6 panelembossed surface.�R factor: 7.0�STC 26 in 20 gauge material.
Units Include:�16 gauge galvanized frame (KD)�20 minute wood rated slab�90 minute Warnock Hersey rated frame�Prep for 161 lock�(3) ea. 4-1/2” x 4-1/2” ball bearing hinges�Left or right hand (must specify)�(3) Door silencers�Anchors sold separately
Note: Masonry frame unit is built up and includes ADA sill, sweep and compression weatherstrip (anchors sold separately).
Units Include:�16 gauge galvaneel 90 min frame (KD)�18 gauge galvaneel 90 min slab�(3) ea. 4-1/4” x 4-1/2” plain bearing hinges�Reinforced for closer (door and frame)�Closed top channel on outswing units�Left or right hand (must specify)�161 or government 86 edge prep (anchors sold separately.�(3) Door silencers
Units Include:�16 gauge galvaneel 90 min frame (assembled)�18 gauge galvaneel 90 min slab�(3) ea. 4-1/4” x 4-1/2” plain bearing hinges�Reinforced for closer (door and frame)�Closed top channel on outswing units�Left or right hand (must specify)�161 or government 86 edge prep �(3) Door silencers�Anchors sold separately
SBC Commercial Catalog 2009 v2Page 19
SBC QUICK PRICE PAGE
6/8 7/0957 1,017
6/81,032
MASONRY
DRYWALL
STEEL FRAME-WOOD 20 MIN DOORS
6/8 7/0822 871822 871
6/8897897
6/8 7/0509 537509 537
6/8 7/0492 520492 520
6/8 7/0494 525494 525
5-5/8”5-7/8”
5-5/8”5-7/8”
Add 4” Head: $21
FLUSH 6 PANEL
FLUSH 6 PANEL
OAK BIRCHIMPERIAL
OAK
644 6835-3/4”
DRYWALL
MASONRY627 666 629 671
5-3/4”
Add 4” Head: $21
3/0 x
3/0 x
3/0 x
Shuster’s Building ComponentsIrwin, PA 15642(Phone) 800-735-9899(Email) [email protected](website) www.shusters.com
“GALVANNEAL” steel provides superior durability and protection against rust in Artek Doors and Frames
What is “GALVANNEAL”?It is steel with a matte-gray “galvanneal” coatingapplied by the steel producer to both sides ofthe sheet, “suitable for immediate painting with-out further treatment except normal cleaning.”
Why use “GALVANNEAL”?To provide superior and inexpensive protec-tion against rust. To eliminate the need forcostly touch-up prior to finish painting. To eliminate the need for costly packaging from the factory.
Where to use “GALVANNEAL”?Common interior and exterior environments in residential, commercial and industrial construction.
“GALVANNEAL” provides an excellent base for finish painting.Surface must be clean and dry, if required, toclean surface oils and grease use ZYLOL or TULUOL. Paint locally or on site according tothe application, local conditions and paint specifications. For most interior and exteriorapplications, directly apply an alkyd or acryliclatex paint in semi or gloss finish. Primer is notrequired. Do not use chemical pretreatments or mineral spirits.
Why coat steel with Zinc?It is the least expensive way of protecting steelagainst corrosion. Zinc, with it’s very low corrosion rate, shields the steel against mostcommon environments, for as long as the zinclasts.
Is “GALVANNEAL” the same as Galvanize?No. “Galvanneal” is a zinc-iron alloy coating.Galvanize is a bright zinc coating with a multi-facteted crystal structure. “Galvanneal” is provided at no charge. Galvanize is an optionalextra.
Are there other names for “GALVANNEAL”?Yes. “Satincoat”, “Wipecoat” and “Galvanneal”are synonymous.
Product storageDo not allow moisture or liquid of any kind toremain on or trapped between surfaces. StoreArtek products off the ground and in covered,dry places. Inspect stored products regularly.If moisture is present, dry immediately.
Technical BitsThe specification to which the steel is manufactured is:ASTM A653/653M - Standard Specifications forSteel Sheet, Zinc Coated (Galvanized) or Zinc-Iron Alloy Coated (Galvanneal) by the Hot-Dipprocess.Arteks standard grade of steel is “CommercialSteel (CS) type B” with the coating designationA40 having a minimum thickness of .40 oz/ft2,total both sides (metric equivalent is ZF120 with120g/m2).
Door and Hardware Institute
Warnock Hersey
C US
CANADIANSTEEL DOOR
MANUFACTURERSASSOCIATION
This material may not be reproduced in its entirety or in part, in any form whatsoever.Prices and specifications subject to change without notice.
SHUSTER’S BUILDING COMPONENTS2920 Clay Pike • Irwin, PA 15642-3098
724-446-7000 • 412-351-0979 • Fax # 800-676-0640www.shusters.com
SHUSTERʼSBuilding Components