117

20852 19/09/11 Proof 3

2

COMLIN ISOLATION PRODUCTS

The primary functions of the product groups shown in this section are:

The reduction or elimination of noise and fatigue due to vibration of pipework against the supporting structure.

The prevention of galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte.

The prevention of wear and/or crushing of composite, thin-wall or non-ferrous pipework.

The materials we offer have been selected to provide optimum performance characteristics over a wide range of applications; our HTFR grade is a flame-retardant material suitable for occasional operation at 662°F. Our low-friction grades, whilst providing very low resistance to sliding pipework, still retain the inherent flexibility of the backing material with no limitation as to how small the pipe can be.

We offer two standard product forms: one for applications using pipe clamps where the Comlin is inserted between the clamp and pipe, this is known as ‘clamp strip’. The second is for U-bolt applications where the U-bolt is sheathed with Comlin and provided with a seating strip for protection to the underside of the pipe.

Comlin is a family of elastomeric materials developed over a number of years to meet the arduous and very specific requirements of the process pipework engineer.

118

20852 19/09/11 Proof 3

COMLIN MATERIAL CHOICE

COMLIN SG60Our standard grade of material, a general purpose grade suitable for most applications within the temperature range of –40° to 212°F. Based on modified rubbers reinforced via accretion with specially selected PVC resins, in many instances its physical properties exceed those of established thermoplastic elastomers. It has exceptionally good tensile and tear strength combined with good resistance to ozone, UV and oil.

COMLIN RG45A specially formulated low modulus polymer alloy suitable for applications that require a very soft, flexible support whilst retaining all the advantages of this type of material.

It has excellent low-temperature performance and is capable of operating within the temperature range –76 to 257°F, with the added advantage of being stable in an irradiated environment. It has very good compression set characteristics and withstands ozone/UV attack and weathering.

This material can be supplied in our own unique low-friction form incorporating integral ribs of polypropylene embedded into the contact face of the product. This is achieved without loss of properties or reduction of temperature range. This grade is designated Comlin RG45LF.

COMLIN FR80Our special fire-retardant grade of material has a UL94 flame rating of V-0 and an oxygen index of only 25%; it has good resistance to ozone/UV attack and has very good flex fatigue. It also has good fluid resistance and good performance in polar chemicals.

Suitable for most applications within the temperature range of –58 to 302°F, the material has excellent compression set properties, weathering resistance and mechanical strength.

Again, this material can be supplied in our low-friction form, and is designated Comlin FR80LF.

COMLIN HTFR65This high temperature material is suitable for applications within the temperature range of –76 to 662°F. Based on silicone technology, it has excellent resistance to fire, very low toxicity and can operate continuously at 572°F with minimum loss of properties. This material has excellent resistance to ozone, UV and weathering, very good compression set and is generally resistant to oils.

Due to the high temperature range capability of this material, it is not possible to provide it with our low-friction facing.

COMPARISON OF COMLIN MATERIALS wITH NEOPRENEOur general purpose grade, Comlin SG60, compares better than neoprene in all respects other than temperature range: both are restricted to an upper temperature limit of 212°F. However, with respect to ozone, UV resistance, weathering, mechanical strength and long-term compression set, Comlin SG60 is superior.

Comlin RG45 and Comlin FR80 grades compare favourably with neoprene with respect to resistance to ozone/UV attack and weathering, but are far superior when considering compression set, operational temperature range and mechanical strength.

Comlin HTFR65 performs considerably better in all respects than neoprene: resistance to ozone, UV, weathering, temperature and fire are all superior.

U-Bolt MaterialThe standard material for Comlin U-Bolts is carbon steel meeting the requirements of BS4190/DIN601 Grade 4.6 with nuts to BS4190/DIN555 Grade 4.

Other grades that are available are:

LTCS: BS4882 Grade L7 with BS4882 Grade 4 nuts

Stainless Steel: BSENISO3506 Grade A2 (Tp304) or Grade A4 (Tp316)

Carbon steel U-Bolts are supplied zinc plated and yellow passivated. Galvanising and Xylan coating are also available upon request.

Specify material and protective coating at time of ordering as follows

Part Number 801-aaa-b-c-d

Where –

aaa is the item size

b is the U-Bolt material

c is the protective coating

d is the Comlin grade – only required for type 801 and 802 U-Bolts.

Code Material (b) Protective Coating (c) Comlin Grade (d)

1 Carbon Steel Zinc Plated & Yellow Passivated FR80

2 LTCS Galvanised HTFR65

3 Tp 304 StSt (A2) Xylan Coated

4 Tp 316 StSt (A4) No protection

Example of full part code would therefore be –

802-108-1-2-2 for 4.26” diameter cupro-nickel pipe with carbon steel u-bolt, galvanised & lined with HTFR65 Comlin.

119

20852 19/09/11 Proof 3

2

COMLIN MATERIAL PROPERTIES

Property TestMethod Unit

Material Grade

SG60 RG45 FR80 HTFR65 RG45LF FR80LF

Hardness, 5 Sec D2240 Shore A 60 45 80 65 50 85

Specific Gravity D297 1.17 0.97 1.24 1.31 1.05 1.31

Ultimate TensileStrength D412 PSI 723.8 79 473.8 493.5 79 473.8

Ultimate Elongation D412 % 350 300 410 350 300 410

100% Modulus D412 PSI 381.6 79 210.6 263.2 79 210.6

Compression Set@ 168 Hrs. 77 ˚F D395B % 37.0 13.0 27.1 10.0 13.0 27.1

Compression Set@ 168 Hrs. 212 ˚F D395B % 45.0 22.0 46.3 15.0 22.0 46.3

Tension Set D412 % 11.0 5.0 10.0 12.0 5.0 10.0

Brittle Point D746 ˚F -49.0 -104.8 -68.8 -94.0 -104.8 -68.8

Maximum ContinuousTemperature

˚F 212 257 302 572 257 302

Oxygen Index D2863 — — 25.0 35.0 — 25.0

Horizontal Burn UL94 HB — — V-0 V-0 — V-0

Ozone/UV Resistance V.Good V.Good V.Good V.Good V.Good V.Good

Dielectric Constant 2.2 2.3 2.44 2.8 2.3 2.44

Colour Code

Type 801 —* —* Black Grey — —

Type 802 —* —* Red Grey — —

Type 901 — — — — —* Black

Type 902 — — — — —* Red

Type 816 Red Beige Green Grey — —

Type 817 Red Beige Green Grey — —

Type 818 — — Green — — —

Type 916 — — — — Beige Green

Type 917 — — — — Beige Green

Type 918 — — — — — Green

* Available upon special request — non-stock products.

120

20852 19/09/11 Proof 3

801 COMLIN GRIP TYPE LINED U-BOLTFOR STAINLESS STEEL & GALVANISED PIPES -76˚F TO +572˚F

A

C

A/2D

B

E

F

G

Order by: Part Number ‘802-aaa-b-c-d’available iN grades Fr80 & HtFr65.

802 COMLIN GRIP TYPE LINED U-BOLTFOR COPPER & CUPRO-NICKEL PIPES -76˚F TO +572˚F

Order by: Part Number ‘801-aaa-b-c-d’available iN grades Fr80 & HtFr65.

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

801-021 0.83 0.24 1.46 2.37 0.79 0.32 1.19 2.37

801-027 1.07 0.24 1.7 2.56 0.79 0.32 1.26 2.52

801-034 1.34 0.24 1.97 2.56 0.79 0.32 1.11 2.37

801-043 1.7 0.4 2.72 2.76 0.99 0.4 0.75 2.72

801-049 1.93 0.4 2.96 3.15 0.99 0.4 1.03 3

801-061 2.41 0.4 3.43 3.55 0.99 0.4 1.19 3.15

801-072 2.84 0.48 3.86 3.75 0.99 0.4 0.99 3.27

801-089 3.51 0.48 4.53 3.94 0.99 0.4 0.87 3.15

801-115 4.53 0.48 5.56 4.34 0.99 0.4 0.75 3.04

801-140 5.52 0.48 6.54 5.32 0.99 0.4 1.23 3.51

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

802-016 0.63 0.24 1.26 2.37 0.79 0.32 1.26 2.37

802-025 0.99 0.24 1.62 2.56 0.79 0.32 1.3 2.56

802-030 1.19 0.24 1.82 2.56 0.79 0.32 1.19 2.45

802-038 1.5 0.4 2.52 2.76 0.99 0.4 0.83 2.76

802-045 1.78 0.4 2.8 3.15 0.99 0.4 1.11 3.08

802-057 2.25 0.4 3.27 3.55 0.99 0.4 1.26 3.23

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

801-168 6.62 0.63 8.27 7.09 1.38 0.6 1.93 5.04

801-219 8.63 0.63 10.28 7.88 1.38 0.6 1.74 4.85

801-245 9.65 0.63 11.3 8.27 1.38 0.6 1.62 4.73

801-273 10.75 0.63 12.41 8.86 1.38 0.6 1.66 4.77

801-324 12.76 0.63 14.41 9.85 1.38 0.6 1.62 4.73

801-356 14.02 0.63 15.67 10.44 1.38 0.6 1.58 4.69

801-407 16.03 0.63 17.68 11.82 1.38 0.6 1.97 5.08

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

802-076 3 0.48 4.02 3.94 0.99 0.4 1.11 3.39

802-089 3.51 0.48 4.53 4.34 0.99 0.4 1.26 3.55

802-108 4.26 0.48 5.28 4.73 0.99 0.4 1.26 3.55

802-159 6.26 0.63 7.92 6.5 1.38 0.6 1.54 4.65

802-219 8.63 0.63 10.28 7.88 1.38 0.6 1.74 4.85

121

20852 19/09/11 Proof 3

2

901 COMLIN NON-GRIP TYPE LINED U-BOLTFOR STAINLESS STEEL & GALVANISED PIPES -76˚F TO +302˚F

A

C

A/2D

B

E

F

G

Order by: Part Number ‘901-aaa-b-c’available iN grade Fr80lF ONly

Order by: Part Number ‘902-aaa-b-c’available iN grade Fr80lF ONly

902 COMLIN NON-GRIP TYPE LINED U-BOLTFOR COPPER & CUPRO-NICKEL PIPES -76°C TO +302°C

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

901-021 0.83 0.24 1.46 2.37 0.79 0.32 1.19 2.37

901-027 1.07 0.24 1.7 2.56 0.79 0.32 1.26 2.52

901-034 1.34 0.24 1.97 2.56 0.79 0.32 1.11 2.37

901-043 1.7 0.4 2.72 2.76 0.99 0.4 0.75 2.72

901-049 1.93 0.4 2.96 3.15 0.99 0.4 1.03 3

901-061 2.41 0.4 3.43 3.55 0.99 0.4 1.19 3.15

901-072 2.84 0.48 3.86 3.75 0.99 0.4 0.99 3.27

901-089 3.51 0.48 4.53 3.94 0.99 0.4 0.87 3.15

901-115 4.53 0.48 5.56 4.34 0.99 0.4 0.75 3.04

901-140 5.52 0.48 6.54 5.32 0.99 0.4 1.23 3.51

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

902-016 0.63 0.24 1.26 2.37 0.79 0.32 1.26 2.37

902-025 0.99 0.24 1.62 2.56 0.79 0.32 1.3 2.56

902-030 1.19 0.24 1.82 2.56 0.79 0.32 1.19 2.45

902-038 1.5 0.4 2.52 2.76 0.99 0.4 0.83 2.76

902-045 1.78 0.4 2.8 3.15 0.99 0.4 1.11 3.08

902-057 2.25 0.4 3.27 3.55 0.99 0.4 1.26 3.23

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

901-168 6.62 0.63 8.27 7.09 1.38 0.6 1.93 5.04

901-219 8.63 0.63 10.28 7.88 1.38 0.6 1.74 4.85

901-245 9.65 0.63 11.3 8.27 1.38 0.6 1.62 4.73

901-273 10.75 0.63 12.41 8.86 1.38 0.6 1.66 4.77

901-324 12.76 0.63 14.41 9.85 1.38 0.6 1.62 4.73

901-356 14.02 0.63 15.67 10.44 1.38 0.6 1.58 4.69

901-407 16.03 0.63 17.68 11.82 1.38 0.6 1.97 5.08

PARTNUMBER

DIMENSIONS (mm)

A B C D E F GTHD

Length

902-076 3 0.48 4.02 3.94 0.99 0.4 1.11 3.39

902-089 3.51 0.48 4.53 4.34 0.99 0.4 1.26 3.55

902-108 4.26 0.48 5.28 4.73 0.99 0.4 1.26 3.55

902-159 6.26 0.63 7.92 6.5 1.38 0.6 1.54 4.65

902-219 8.63 0.63 10.28 7.88 1.38 0.6 1.74 4.85

122

20852 19/09/11 Proof 3

816 AND 817 COMLIN CLAMP STRIP -76°F to +572°F

AE

CB D

Order by: Part Number, leNgtH aNd COmliN grade. available eitHer Cut tO reQuired leNgtH Or aNy leNgtH uP tO 75 Feet.

Recommended Length of Clamp Strip vs Pipe Size

PARTNUMBER

DIMENSIONS (in)

A B C D E

817-30 0.99 0.3 1.78 0.2 1.19

817-40 1.38 0.34 2.25 0.24 1.58

817-50 1.78 0.34 2.64 0.24 1.97

817-60 2.17 0.34 3.04 0.24 2.37

817-70 2.56 0.34 3.35 0.24 2.76

817-90 3.35 0.58 4.14 0.38 3.55

817-110 4.14 0.58 4.93 0.38 4.34

817-130 4.93 0.58 5.71 0.38 5.12

817-150 5.91 0.69 6.5 0.5 5.91

DIMENSIONS (in)

Pipe 816 817 817 817 817 817 817 817 817 817 817

O/D ALL 20 30 40 50 60 70 90 110 130 150

1.06 3.47 3.47 3.55 3.59 3.59 3.59 3.59 3.71 3.71 3.71 3.86

1.33 4.3 4.3 4.38 4.41 4.41 4.41 4.41 4.57 4.57 4.57 4.69

1.67 5.36 5.36 5.44 5.48 5.48 5.48 5.48 5.63 5.63 5.63 5.75

1.91 6.11 6.11 6.19 6.23 6.23 6.23 6.23 6.38 6.38 6.38 6.5

2.38 7.6 7.6 7.68 7.72 7.72 7.72 7.72 7.84 7.84 7.84 8

3 9.53 9.53 9.61 9.65 9.65 9.65 9.65 9.81 9.81 9.81 9.93

3.5 11.11 11.11 11.23 11.26 11.26 11.26 11.26 11.38 11.38 11.38 11.5

4.5 14.26 14.26 14.34 14.38 14.38 14.38 14.38 14.53 14.53 14.53 14.65

5.5 17.41 17.41 17.49 17.52 17.52 17.52 17.52 17.68 17.68 17.68 17.8

6.63 20.95 20.95 21.03 21.07 21.07 21.07 21.07 21.23 21.23 21.23 21.34

8.63 27.21 27.21 27.33 27.37 27.37 27.37 27.37 27.49 27.49 27.49 27.6

9.63 30.36 30.36 30.44 30.48 30.48 30.48 30.48 30.63 30.63 30.63 30.75

10.75 33.9 33.9 33.98 34.02 34.02 34.02 34.02 34.18 34.18 34.18 34.3

12.76 40.2 40.2 40.28 40.32 40.32 40.32 40.32 40.48 40.48 40.48 40.6

14 44.1 44.1 44.18 44.22 44.22 44.22 44.22 44.38 44.38 44.38 44.49

16 50.4 50.4 50.48 50.52 50.52 50.52 50.52 50.67 50.67 50.67 50.79

18 56.66 56.66 56.74 56.78 56.78 56.78 56.78 56.93 56.93 56.93 57.05

20 62.96 62.96 63.04 63.08 63.08 63.08 63.08 63.23 63.23 63.23 63.35

24.02 75.6 75.6 75.67 75.71 75.71 75.71 75.71 75.83 75.83 75.83 75.95

30 94.38 94.38 94.45 94.49 94.49 94.49 94.49 94.65 94.65 94.65 94.77

35.99 113.19 113.19 113.27 113.31 113.31 113.31 113.31 113.43 113.43 113.43 113.59

PARTNUMBER

DIMENSIONS (in)

A B C D E

816-30 0.99 0.2 1.58 0.12 1.19

816-40 1.38 0.2 1.97 0.12 1.58

816-45 1.58 0.2 2.17 0.12 1.78

816-50 1.78 0.2 2.37 0.12 1.99

816-60 2.17 0.2 2.76 0.12 2.37

816-65 2.37 0.2 3.15 0.12 2.56

816-70 2.56 0.2 3.35 0.12 2.76

816-75 2.76 0.2 3.55 0.12 2.96

816-80 2.96 0.2 3.75 0.12 3.15

816-90 3.35 0.24 4.14 0.12 3.55

816-100 3.75 0.24 4.53 0.12 3.94

816-110 4.14 0.24 4.93 0.12 4.34

816-130 4.93 0.24 5.71 0.12 5.12

816-140 5.32 0.24 6.11 0.12 5.71

816-150 5.91 0.24 6.5 0.12 5.91

123

20852 19/09/11 Proof 3

2

916 AND 917 COMLIN LINED CLAMP STRIP -76°F TO +302°F

Order by: Part Number & leNgtHavailable iN grade Fr80lF ONly iN aNy leNgtH uP tO 75 Feet.

Recommended Length of Clamp Strip vs Pipe Size

A

E

CB D

PARTNUMBER

DIMENSIONS (in)

A B C D E

916-30 0.99 0.2 1.58 0.12 1.19

916-40 1.38 0.2 1.97 0.12 1.58

916-45 1.58 0.2 2.17 0.12 1.78

916-50 1.78 0.2 2.37 0.12 1.99

916-60 2.17 0.2 2.76 0.12 2.37

916-65 2.37 0.2 3.15 0.12 2.56

916-70 2.56 0.2 3.35 0.12 2.76

916-75 2.76 0.2 3.55 0.12 2.96

916-80 2.96 0.2 3.75 0.12 3.15

916-90 3.35 0.24 4.14 0.12 3.55

916-100 3.75 0.24 4.53 0.12 3.94

916-110 4.14 0.24 4.93 0.12 4.34

916-130 4.93 0.24 5.71 0.12 5.12

916-140 5.32 0.24 6.11 0.12 5.71

916-150 5.91 0.24 6.5 0.12 5.91

PARTNUMBER

DIMENSIONS (in)

A B C D E

917-30 0.99 0.3 1.78 0.2 1.19

917-40 1.38 0.34 2.25 0.24 1.58

917-50 1.78 0.34 2.64 0.24 1.97

917-60 2.17 0.34 3.04 0.24 2.37

917-70 2.56 0.34 3.35 0.24 2.76

917-90 3.35 0.58 4.14 0.38 3.55

917-110 4.14 0.58 4.93 0.38 4.34

917-130 4.93 0.58 5.71 0.38 5.12

917-150 6 0.69 7 0.5 5.91

DIMENSIONS (in)

Pipe 916 917 917 917 917 917 917 917 917 917 917

O/D ALL 20 30 40 50 60 70 90 110 130 150

1.06 3.47 3.47 3.55 3.59 3.59 3.59 3.59 3.71 3.71 3.71 3.86

1.33 4.3 4.3 4.38 4.41 4.41 4.41 4.41 4.57 4.57 4.57 4.69

1.67 5.36 5.36 5.44 5.48 5.48 5.48 5.48 5.63 5.63 5.63 5.75

1.91 6.11 6.11 6.19 6.23 6.23 6.23 6.23 6.38 6.38 6.38 6.5

2.38 7.6 7.6 7.68 7.72 7.72 7.72 7.72 7.84 7.84 7.84 8

3 9.53 9.53 9.61 9.65 9.65 9.65 9.65 9.81 9.81 9.81 9.93

3.5 11.11 11.11 11.23 11.26 11.26 11.26 11.26 11.38 11.38 11.38 11.5

4.5 14.26 14.26 14.34 14.38 14.38 14.38 14.38 14.53 14.53 14.53 14.65

5.5 17.41 17.41 17.49 17.52 17.52 17.52 17.52 17.68 17.68 17.68 17.8

6.63 20.95 20.95 21.03 21.07 21.07 21.07 21.07 21.23 21.23 21.23 21.34

8.63 27.21 27.21 27.33 27.37 27.37 27.37 27.37 27.49 27.49 27.49 27.6

9.63 30.36 30.36 30.44 30.48 30.48 30.48 30.48 30.63 30.63 30.63 30.75

10.75 33.9 33.9 33.98 34.02 34.02 34.02 34.02 34.18 34.18 34.18 34.3

12.76 40.2 40.2 40.28 40.32 40.32 40.32 40.32 40.48 40.48 40.48 40.6

14 44.1 44.1 44.18 44.22 44.22 44.22 44.22 44.38 44.38 44.38 44.49

16 50.4 50.4 50.48 50.52 50.52 50.52 50.52 50.67 50.67 50.67 50.79

18 56.66 56.66 56.74 56.78 56.78 56.78 56.78 56.93 56.93 56.93 57.05

20 62.96 62.96 63.04 63.08 63.08 63.08 63.08 63.23 63.23 63.23 63.35

24.02 75.6 75.6 75.67 75.71 75.71 75.71 75.71 75.83 75.83 75.83 75.95

30 94.38 94.38 94.45 94.49 94.49 94.49 94.49 94.65 94.65 94.65 94.77

35.99 113.19 113.19 113.27 113.31 113.31 113.31 113.31 113.43 113.43 113.43 113.59

124

20852 19/09/11 Proof 3

818 COMLIN GRIP CLAMP STRIP -76°F TO +572°F

818 COMLIN GRIP CLAMP STRIP -76°F TO +572°F

918 COMLIN GRIP CLAMP STRIP -76°F TO +572°F

Order by: Part Number, leNgth & COmliN gradeavailable iN grades Fr80 & htFr65 iN aNy leNgth uP tO 75 Feet.

Order by: Part Number & leNgthavailable iN grade Fr80lF ONly iN aNy leNgth uP tO 75 Feet.

A

C

B

0.12

PART NUMBER A B C

818 - 025 x 06 0.99 0.24 1.19

818 - 035 x 06 1.38 0.24 1.58

818 - 050 x 06 1.97 0.24 2.17

818 - 050 x 10 1.97 0.40 2.17

818 - 065 x 10 2.56 0.40 2.76

818 - 080 x 10 3.15 0.40 3.35

818 - 100 x 10 3.94 0.40 4.14

818 - 100 x 20 3.94 0.79 4.14

PART NUMBER A B C

918 - 025 x 06 0.99 0.24 1.19

918 - 035 x 06 1.38 0.24 1.58

918 - 050 x 06 1.97 0.24 2.17

918 - 050 x 10 1.97 0.40 2.17

918 - 065 x 10 2.56 0.40 2.76

918 - 080 x 10 3.15 0.40 3.35

918 - 100 x 10 3.94 0.40 4.14

918 - 100 x 20 3.94 0.79 4.14

125

20852 19/09/11 Proof 3

2

371-CM1 U-STRAP (GRIP TYPE CS wITH COMLIN)

Order by: Part Number & leNgthavailable iN grade Fr80lF ONly iN aNy leNgth uP tO 75 Feet.

1/8” PLATE

Comlin liner for u-strap = F818 x “W” x “h”: gr.Fr80 or htFr654 nuts, 2 locknuts and 4 washers per strapmaterial: Carbon steel

PARTNUMBERS

LINE SIZE

R A K WSTRAP

H

STUD SIZE MAX LOAD (••)WEIGHT

lbsLINERD.L’THmm in D L T E Fy Fx

F371-50 DN50 2” 1.38 3.63 5.12 1.97 0.24 0.4 3.15 2.56 0.6 3.59 0.78 1 5.52

F371-80 DN80 3” 1.97 4.89 6.5 1.97 0.24 0.48 3.75 2.76 0.99 5.39 0.67 1 8.15

F371-100 DN100 4” 2.45 5.83 7.49 1.97 0.24 0.48 4.53 3.35 1.19 5.39 0.56 2 10.04

F371-125 DN125 5” 3 6.93 8.86 1.97 0.24 0.48 5.12 3.75 1.38 5.39 0.44 2 12.17

F371-150 DN150 6” 3.51 8.12 10.24 1.97 0.24 0.63 6.11 3.94 2.17 10.11 0.56 3 15.36

F371-200 DN200 8” 4.57 10.24 12.21 2.37 0.24 0.63 7.09 3.94 3.15 10.11 0.44 4 20.63

F371-250 DN250 10” 5.63 12.84 14.97 2.56 0.4 0.79 8.27 4.34 3.94 15.73 0.89 10 25.56

F371-300 DN300 12” 6.62 14.81 16.93 2.56 0.4 0.79 9.65 4.53 5.12 15.73 0.78 12 31.03

F371-350 DN350 14” 7.25 16.07 18.12 2.56 0.4 0.79 10.24 4.34 5.91 15.73 0.67 13 34.57

126

20852 19/09/11 Proof 3

372-CM1 U-STRAP (GRIP TYPE SS wITH COMLIN)

1/8” PLATE

Comlin liner for u-strap = F818 x “W” x “h”: gr.Fr80 or htFr654 nuts, 2 locknuts and 4 washers per strapmaterial: stainless steel grade 316

PARTNUMBERS

LINE SIZE

R A K W

STRAP STUD SIZE MAX LOAD(kip)WEIGHT

lbsLINERD.L’THmm in H D L T E Fy Fx

F372-50 DN50 2” 1.38 3.63 5.12 1.97 0.24 0.4 3.15 2.56 0.6 3.59 0.78 1.5 5.52

F372-80 DN80 3” 1.97 4.89 6.5 1.97 0.24 0.48 3.75 2.76 0.99 5.39 0.67 1.9 8.15

F372-100 DN100 4” 2.45 5.83 7.49 1.97 0.24 0.48 4.53 3.35 1.19 5.39 0.56 2.4 10.04

F372-125 DN125 5” 3 6.93 8.86 1.97 0.24 0.48 5.12 3.75 1.38 5.39 0.44 2.8 12.17

F372-150 DN150 6” 3.51 8.12 10.24 1.97 0.24 0.63 6.11 3.94 2.17 10.11 0.56 3.7 15.36

F372-200 DN200 8” 4.57 10.24 12.21 1.97 0.24 0.63 7.09 3.94 3.15 10.11 0.44 4.6 20.63

F372-250 DN250 10” 5.63 12.84 14.97 2.56 0.4 0.79 8.27 4.34 3.94 15.73 0.89 10.5 25.56

F372-300 DN300 12” 6.62 14.81 16.93 2.56 0.4 0.79 9.65 4.53 5.12 15.73 0.78 12.5 31.03

F372-350 DN350 14” 7.25 16.07 18.12 2.56 0.4 0.79 10.24 4.34 5.91 15.73 0.67 13.8 34.57

127

20852 19/09/11 Proof 3

2

373-CM1 U-STRAP (NON-GRIP TYPE CS wITH COMLIN)

1/8” PLATE

Comlin liner for u-strap = F918 x “W” x “h”: gr.Fr80lF. PtFe for lower pad = 25% glass filled PtFe (etched one side)4 locknuts and 2 washers per strapmaterial: Carbon steel

PARTNUMBERS

LINE SIZE STRAP STUD SIZE MAX LOAD(kip) WEIGHT LINER

mm in R A K W H D L T E Fy Fx lbs D.LʼTH

F373-50 DN50 2” 1.38 3.63 5.12 1.97 0.24 0.4 3.15 2.56 0.6 3.59 0.78 1.3 5.52

F373-80 DN80 3” 1.97 4.89 6.5 1.97 0.24 0.48 3.75 2.76 0.99 5.39 0.67 1.9 8.15

F373-100 DN100 4” 2.45 5.83 7.49 1.97 0.24 0.48 4.53 3.35 1.19 5.39 0.56 2.2 10.04

F373-125 DN125 5” 3 6.93 8.86 1.97 0.24 0.48 5.12 3.75 1.38 5.39 0.44 2.6 12.17

F373-150 DN150 6” 3.51 8.12 10.24 1.97 0.24 0.63 6.11 3.94 2.17 10.11 0.56 3.5 15.36

F373-200 DN200 8” 4.57 10.24 12.21 1.97 0.24 0.63 7.09 3.94 3.15 10.11 0.44 4.4 20.63

F373-250 DN250 10” 5.63 12.84 14.97 2.56 0.4 0.79 8.27 4.34 3.94 15.73 0.89 10.1 25.56

F373-300 DN300 12” 6.62 14.81 16.93 2.56 0.4 0.79 9.65 4.53 5.12 15.73 0.78 12.1 31.03

F373-350 DN350 14” 7.25 16.07 18.12 2.56 0.4 0.79 10.24 4.34 5.91 15.73 0.67 13.2 34.57

F373-400 DN400 16” 8.23 18.04 20.12 3.15 0.4 0.79 11.23 4.14 7.09 15.73 0.89 18.2 40.04

F373-450 DN450 18” 9.26 20.24 22.49 3.15 0.4 0.95 12.6 5.12 7.49 22.93 1.01 21.1 44.02

F373-500 DN500 20” 10.24 22.21 24.45 3.15 0.4 0.95 13.59 5.12 8.47 22.93 0.89 23.3 49.1

F373-600 DN600 24” 12.25 26.23 28.59 3.94 0.4 0.95 15.75 5.71 10.04 22.93 0.89 33.2 58.55

128

20852 19/09/11 Proof 3

374-CM1 U-STRAP (NON-GRIP TYPE SS wITH COMLIN)

1/8” PLATE

Comlin liner for u-strap = F918 x “W” x “h”: gr.Fr80lF. PtFe for lower pad = 25% glass filled PtFe (etched one side)4 locknuts and 2 washers per strapmaterial: stainless steel grade 316

PARTNUMBERS

LINE SIZE

R A K W

STRAP STUD SIZE MAX LOAD(kip)WEIGHT

lbsLINERD.L’THmm in H D L T E Fy Fx

F374-50 DN50 2” 1.38 3.63 5.12 1.97 0.24 0.4 3.15 2.56 0.6 3.59 0.78 1.3 5.52

F374-80 DN80 3” 1.97 4.89 6.5 1.97 0.24 0.48 3.75 2.76 0.99 5.39 0.67 1.9 8.15

F374-100 DN100 4” 2.45 5.83 7.49 1.97 0.24 0.48 4.53 3.35 1.19 5.39 0.56 2.2 10.04

F374-125 DN125 5” 3 6.93 8.86 1.97 0.24 0.48 5.12 3.75 1.38 5.39 0.44 2.6 12.17

F374-150 DN150 6” 3.51 8.12 10.24 1.97 0.24 0.63 6.11 3.94 2.17 10.11 0.56 3.5 15.36

F374-200 DN200 8” 4.57 10.24 12.21 1.97 0.24 0.63 7.09 3.94 3.15 10.11 0.44 4.4 20.63

F374-250 DN250 10” 5.63 12.84 14.97 2.56 0.4 0.79 8.27 4.34 3.94 15.73 0.89 10.1 25.56

F374-300 DN300 12” 6.62 14.81 16.93 2.56 0.4 0.79 9.65 4.53 5.12 15.73 0.78 12.1 31.03

F374-350 DN350 14” 7.25 16.07 18.12 2.56 0.4 0.79 10.24 4.34 5.91 15.73 0.67 13.2 34.57

F374-400 DN400 16” 8.23 18.04 20.12 3.15 0.4 0.79 11.23 4.14 7.09 15.73 0.89 18.2 40.04

F374-450 DN450 18” 9.26 20.24 22.49 3.15 0.4 0.95 12.6 5.12 7.49 22.93 1.01 21.1 44.02

F374-500 DN500 20” 10.24 22.21 24.45 3.15 0.4 0.95 13.59 5.12 8.47 22.93 0.89 23.3 49.1

F374-600 DN600 24” 12.25 26.23 28.59 3.94 0.4 0.95 15.75 5.71 10.04 22.93 0.89 33.2 58.55

129

20852 19/09/11 Proof 3

2

TwO BOLT PIPE CLAMP wITH COMLIN MAx. TEMPERATURE 572ºF

C

E

D

B

ØA

Order by Part Number, Comlin type and Comlin grade e.g. PC2-Cm2-100-2/817/Fr80material: Carbon steel and Comlin. also available in stainless steel.Pipe Clamps with other load Capacities are also available.* do not exceed the maximum temperature for the grade of Comlin used.

PART NUMBER FORCOMLIN TYPE816, 916, 818 & 918

PART NUMBER FORCOMLIN TYPE817 &917

PIPE O/D A B C D E WEIGHT*LOAD CAPACITY

AT 572 F

mm in in in mm in in in lbs lbs

PC2-CM1-15-0 PC2-CM2-15-0 21.3 0.839 0.48 0.6 35 1 3/8 0.71 1.38 0.8 859

PC2-CM1-20-0 PC2-CM2-20-0 26.7 1.051 0.48 0.6 40 1 9/16 0.71 1.38 0.8 859

PC2-CM1-25-0 PC2-CM2-25-0 33.4 1.315 0.48 0.6 45 1 3/4 0.71 1.38 1.1 859

PC2-CM1-32-0 PC2-CM2-32-0 42.2 1.661 0.48 0.6 50 1 15/16 0.71 1.38 1.1 859

PC2-CM1-40-0 PC2-CM2-40-0 48.3 1.902 0.48 0.6 55 2 3/16 0.71 1.38 1.1 859

PC2-CM1-50-0 PC2-CM2-50-0 60.3 2.375 0.48 0.6 60 2 3/8 0.71 1.38 1.3 859

PC2-CM1-65-2 PC2-CM2-65-2 73 2.875 0.63 0.67 70 2 3/4 0.95 1.58 2.2 1300

PC2-CM1-80-2 PC2-CM2-80-2 88.9 3.500 0.63 0.67 80 3 1/8 0.95 1.58 2.4 1168

PC2-CM1-100-0 PC2-CM2-100-0 114.3 4.500 0.48 0.6 90 3 9/16 0.71 1.38 1.7 595

PC2-CM1-100-2 PC2-CM2-100-2 114.3 4.500 0.63 0.67 100 3 15/16 0.95 1.58 3.7 1631

PC2-CM1-150-0 PC2-CM2-150-0 168.3 6.625 0.48 0.6 120 4 3/4 0.71 1.58 3 749

PC2-CM1-150-2 PC2-CM2-150-2 168.3 6.625 0.63 0.67 125 4 15/16 0.95 1.58 4.6 1300

PC2-CM1-200-1 PC2-CM2-200-1 219.1 8.625 0.63 0.67 155 6 1/8 0.95 1.58 5.5 1014

PC2-CM1-200-2 PC2-CM2-200-2 219.1 8.625 0.63 0.67 160 6 5/16 0.95 1.78 7.7 1741

PC2-CM1-250-1 PC2-CM2-250-1 273 10.750 0.63 0.67 180 7 1/16 0.95 1.58 6.3 903

PC2-CM1-250-3 PC2-CM2-250-3 273 10.750 0.79 0.79 195 7 11/16 1.19 2.37 15.2 2733

PC2-CM1-300-2 PC2-CM2-300-2 323.9 12.750 0.63 0.67 210 8 1/4 0.95 1.78 10.1 1433

PC2-CM1-300-4 PC2-CM2-300-4 323.9 12.750 0.95 0.99 240 9 7/16 1.42 2.56 32.6 4034

PC2-CM1-350-3 PC2-CM2-350-3 355.6 14.000 0.79 0.79 235 9 1/4 1.19 2.37 18.2 2380

PC2-CM1-350-5 PC2-CM2-350-5 355.6 14.000 1.19 1.15 265 10 7/16 1.78 3.55 51.1 6724

PC2-CM1-400-4 PC2-CM2-400-4 406.4 16.000 0.95 0.99 280 11 1.42 2.56 38.1 4034

PC2-CM1-400-6 PC2-CM2-400-6 406.4 16.000 1.42 1.62 295 11 5/8 2.13 4.34 71.2 8399

PC2-CM1-450-4 PC2-CM2-450-4 457.2 18.000 0.95 0.99 310 12 3/16 1.42 2.56 42.1 4034

PC2-CM1-450-6 PC2-CM2-450-6 457.2 18.000 1.42 1.62 320 12 5/8 2.13 4.34 77.1 8399

PC2-CM1-500-4 PC2-CM2-500-4 508 20.000 0.95 0.99 335 13 3/16 1.42 2.56 45.6 4034

PC2-CM1-500-7 PC2-CM2-500-7 508 20.000 1.66 1.78 365 14 3/8 2.49 5.12 110.2 12059

PC2-CM1-550-5 PC2-CM2-550-5 558.8 22.000 1.19 1.15 370 14 9/16 1.78 3.55 71.2 6437

PC2-CM1-550-7 PC2-CM2-550-7 558.8 22.000 1.66 1.78 395 15 9/16 2.49 5.12 138.8 12059

PC2-CM1-600-5 PC2-CM2-600-5 609.6 24.000 1.19 1.15 395 15 9/16 1.78 3.55 76 5864

PC2-CM1-600-7 PC2-CM2-600-7 609.6 24.000 1.66 1.78 420 16 9/16 2.49 5.12 147.4 12059

PC2-CM1-650-5 PC2-CM2-650-5 660.4 26.000 1.19 1.15 420 16 9/16 1.78 3.55 80.9 5577

PC2-CM1-650-7 PC2-CM2-650-7 660.4 26.000 1.66 1.78 445 17 1/2 2.49 5.91 179.4 12059

PC2-CM1-700-5 PC2-CM2-700-5 711.2 28.000 1.19 1.15 445 17 1/2 1.78 3.55 85.7 5335

PC2-CM1-700-7 PC2-CM2-700-7 711.2 28.000 1.66 1.78 470 18 1/2 2.49 5.91 189.3 12059

PC2-CM1-750-5 PC2-CM2-750-5 762 30.000 1.19 1.15 475 18 11/16 1.78 4.34 90.6 5180

PC2-CM1-750-8 PC2-CM2-750-8 762 30.000 1.89 2.05 515 20 1/4 2.84 5.91 248.6 16777

PC2-CM1-800-5 PC2-CM2-800-5 812.8 32.000 1.19 1.15 500 19 11/16 1.78 4.34 117 6128

PC2-CM1-800-8 PC2-CM2-800-8 812.8 32.000 1.89 2.05 560 22 1/16 2.84 5.91 350.3 24052

PC2-CM1-850-5 PC2-CM2-850-5 863.6 34.000 1.19 1.15 525 20 11/16 1.78 4.34 123 5930

PC2-CM1-850-8 PC2-CM2-850-8 863.6 34.000 1.89 2.05 590 23 1/4 2.84 5.91 368.6 24052

PC2-CM1-900-6 PC2-CM2-900-6 914.4 36.000 1.42 1.62 570 22 7/16 2.13 4.34 166.6 8289

PC2-CM1-900-8 PC2-CM2-900-8 914.4 36.000 1.89 2.05 615 24 3/16 2.84 5.91 384.9 24052

PC2-CM1-950-6 PC2-CM2-950-6 965 38.000 1.42 1.62 595 23 7/16 2.13 5.12 174.1 8068

PC2-CM1-950-8 PC2-CM2-950-8 965 38.000 1.89 2.05 640 25 3/16 2.84 5.91 401.2 24052

PC2-CM1-1000-6 PC2-CM2-1000-6 1016 40.000 1.42 1.62 620 24 7/16 2.13 5.12 214.2 8399

PC2-CM1-1000-8 PC2-CM2-1000-8 1016 40.000 1.89 2.05 665 26 3/16 2.84 5.91 417.3 24052

130

20852 19/09/11 Proof 3

THREE BOLT PIPE CLAMP wITH COMLIN MAx. TEMPERATURE 572ºF

C

D

B

ØA

E

Order by Part Number, Comlin type and Comlin grade e.g. PC3-Cm2-100-2/817/Fr80material: Carbon steel and Comlin. also available in stainless steel.Pipe Clamps with other load Capacities are also available.* do not exceed the maximum temperature for the grade of Comlin used.

PART NUMBER FORCOMLIN TYPE816, 916, 818 & 918

PART NUMBER FORCOMLIN TYPE817 &917

PIPE O/D A B C D E WEIGHT*LOAD CAPACITY

AT 572°F

mm in in in mm in in in lbs

PC3-CM1-15-0 PC3-CM2-15-0 21.3 0.839 0.48 0.6 100 3 15/16 0.71 1.38 1.3 859

PC3-CM1-20-0 PC3-CM2-20-0 26.7 1.051 0.48 0.6 100 3 15/16 0.71 1.38 1.3 859

PC3-CM1-25-0 PC3-CM2-25-0 33.4 1.315 0.48 0.6 100 3 15/16 0.71 1.38 1.3 859

PC3-CM1-32-0 PC3-CM2-32-0 42.2 1.661 0.48 0.6 110 4 5/16 0.71 1.38 1.5 859

PC3-CM1-40-0 PC3-CM2-40-0 48.3 1.902 0.48 0.6 110 4 5/16 0.71 1.38 1.5 859

PC3-CM1-50-0 PC3-CM2-50-0 60.3 2.375 0.48 0.6 120 4 3/4 0.71 1.38 1.5 859

PC3-CM1-65-2 PC3-CM2-65-2 73 2.875 0.63 0.67 130 5 1/8 0.95 1.58 2.4 1433

PC3-CM1-80-2 PC3-CM2-80-2 88.9 3.500 0.63 0.67 150 5 7/8 0.95 1.58 2.6 1322

PC3-CM1-100-0 PC3-CM2-100-0 114.3 4.500 0.48 0.6 180 7 1/16 0.71 1.38 2.4 595

PC3-CM1-100-2 PC3-CM2-100-2 114.3 4.500 0.63 0.67 180 7 1/16 0.95 1.58 4.4 1763

PC3-CM1-150-0 PC3-CM2-150-0 168.3 6.625 0.48 0.6 210 8 1/4 0.71 1.58 3.9 749

PC3-CM1-150-2 PC3-CM2-150-2 168.3 6.625 0.63 0.67 210 8 1/4 0.95 1.58 5.2 1300

PC3-CM1-200-1 PC3-CM2-200-1 219.1 8.625 0.63 0.67 280 11 0.95 1.58 6.6 1124

PC3-CM1-200-3 PC3-CM2-200-3 219.1 8.625 0.79 0.79 280 11 1.19 2.37 15.4 2910

PC3-CM1-250-2 PC3-CM2-250-2 273 10.750 0.63 0.67 320 12 5/8 0.95 1.78 10.8 1366

PC3-CM1-250-4 PC3-CM2-250-4 273 10.750 0.95 0.99 320 12 5/8 1.42 2.56 33 3505

PC3-CM1-300-3 PC3-CM2-300-3 323.9 12.750 0.79 0.79 350 13 3/4 1.19 2.37 19.8 2601

PC3-CM1-300-4 PC3-CM2-300-4 323.9 12.750 0.95 0.99 350 13 3/4 1.42 2.56 36.8 4034

PC3-CM1-350-3 PC3-CM2-350-3 355.6 14.000 0.79 0.79 380 14 15/16 1.19 2.37 21.6 2425

PC3-CM1-350-5 PC3-CM2-350-5 355.6 14.000 1.19 1.15 380 14 15/16 1.78 3.55 56.8 6724

PC3-CM1-400-4 PC3-CM2-400-4 406.4 16.000 0.95 0.99 420 16 9/16 1.42 2.56 44 4034

PC3-CM1-400-6 PC3-CM2-400-6 406.4 16.000 1.42 1.62 420 16 9/16 2.13 4.34 79.1 8399

PC3-CM1-450-4 PC3-CM2-450-4 457.2 18.000 0.95 0.99 450 17 11/16 1.42 2.56 47.8 4034

PC3-CM1-450-6 PC3-CM2-450-6 457.2 18.000 1.42 1.62 450 17 11/16 2.13 4.34 85.3 8399

PC3-CM1-500-4 PC3-CM2-500-4 508 20.000 0.95 0.99 470 18 1/12 1.42 2.56 51.1 3858

PC3-CM1-500-7 PC3-CM2-500-7 508 20.000 1.66 1.78 470 18 1/12 2.49 4.34 117.5 12059

PC3-CM1-550-5 PC3-CM2-550-5 558.8 22.000 1.19 1.15 500 19 11/16 1.78 3.55 77.8 5533

PC3-CM1-550-7 PC3-CM2-550-7 558.8 22.000 1.66 1.78 500 19 11/16 2.49 5.12 147.4 12059

PC3-CM1-600-5 PC3-CM2-600-5 609.6 24.000 1.19 1.15 520 20 1/12 1.78 3.55 82.4 5202

PC3-CM1-600-7 PC3-CM2-600-7 609.6 24.000 1.66 1.78 520 20 1/12 2.49 5.12 155.6 12059

PC3-CM1-650-5 PC3-CM2-650-5 660.4 26.000 1.19 1.15 560 22 1/16 1.78 3.55 89.9 5158

PC3-CM1-650-7 PC3-CM2-650-7 660.4 26.000 1.66 1.78 560 22 1/16 2.49 5.12 191.8 12059

PC3-CM1-700-5 PC3-CM2-700-5 711.2 28.000 1.19 1.15 590 23 1/4 1.78 3.55 95.2 5335

PC3-CM1-700-7 PC3-CM2-700-7 711.2 28.000 1.66 1.78 590 23 1/4 2.49 5.91 202.6 12059

PC3-CM1-750-5 PC3-CM2-750-5 762 30.000 1.19 1.15 640 25 3/16 1.78 4.34 124.1 6327

PC3-CM1-750-8 PC3-CM2-750-8 762 30.000 1.89 2.05 640 25 3/16 2.84 5.91 265.4 17989

PC3-CM1-800-5 PC3-CM2-800-5 812.8 32.000 1.19 1.15 660 26 1.78 4.34 129.6 6150

PC3-CM1-800-8 PC3-CM2-800-8 812.8 32.000 1.89 2.05 660 26 2.84 5.91 276.9 16777

PC3-CM1-850-5 PC3-CM2-850-5 863.6 34.000 1.19 1.15 710 27 15/16 1.78 4.34 137.5 5930

PC3-CM1-850-8 PC3-CM2-850-8 863.6 34.000 1.89 2.05 710 27 15/16 2.84 5.91 388.8 19665

PC3-CM1-900-6 PC3-CM2-900-6 914.4 36.000 1.42 1.62 740 29 1/18 2.13 5.12 215.8 8399

PC3-CM1-900-8 PC3-CM2-900-8 914.4 36.000 1.89 2.05 740 29 1/18 2.84 5.91 407.1 18871

PC3-CM1-950-6 PC3-CM2-950-6 965 38.000 1.42 1.62 770 30 5/16 2.13 5.12 225.3 8399

PC3-CM1-950-8 PC3-CM2-950-8 965 38.000 1.89 2.05 770 30 5/16 2.84 5.91 424.8 18540

PC3-CM1-1000-6 PC3-CM2-1000-6 1016 40.000 1.42 1.62 790 31 1/8 2.13 5.12 233.6 8399

PC3-CM1-1000-8 PC3-CM2-1000-8 1016 40.000 1.89 2.05 790 31 1/8 2.84 5.91 444.8 22046

131

20852 19/09/11 Proof 3

6

2

PIPE CLAMP BASE wITH COMLIN MAx. TEMPERATURE 572ºF

D

A

C

E

B

C

A D

C

C C

A

C

A

D

A

CC

CC

A

Order by Part Number, Comlin type and Comlin grade e.g. Pb1-Cm1-150-4/816/Fr80material: Carbon steel and Comlin. also available in stainless steel.Pipe Clamp bases with other load Capacities are also available.* do not exceed the maximum temperature for the grade of Comlin used.

PB2

PB3

PB4

PB1TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE STATED VERTICAL LOAD CAPACITY.

TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.

TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR VERTICAL PIPES.

PART NUMBER FORCOMLIN TYPE816, 916, 818 & 918

PART NUMBER FORCOMLIN TYPE817 & 917

Pipe O/D A B C D EMax

LaggingThickness

WEIGHT

LoadCapacity

(Seenotes)

For Multi-Leg types, replace PB1 withPB2, PB3 or PB4

mm in in in mm in in in inPB1lbs

PB2lbs

PB3lbs

PB4lbs

lbs

PB1-CM1-15-1 PB1-CM2-15-1 21.3 0.839 1.97 5.91 90 3 9/16 4.18 7.29 2.96 3.9 6.6 9.2 11.9 793

PB1-CM1-20-1 PB1-CM2-20-1 26.7 1.051 1.97 5.91 90 3 9/16 4.34 7.29 2.96 3.9 6.6 9.2 11.9 793

PB1-CM1-25-1 PB1-CM2-25-1 33.4 1.315 1.97 5.91 90 3 9/16 4.73 7.29 2.76 4.1 6.8 9.4 11.9 793

PB1-CM1-32-1 PB1-CM2-32-1 42.2 1.661 2.37 5.91 100 31 5/16 5.12 7.29 2.96 5 8.1 11.4 14.7 793

PB1-CM1-40-1 PB1-CM2-40-1 48.3 1.902 2.37 5.91 100 31 5/16 5.44 7.29 2.96 5 8.3 11.4 14.7 793

PB1-CM1-50-2 PB1-CM2-50-2 60.3 2.375 2.76 5.91 110 4 5/16 5.91 8 2.96 5.9 9.7 13.6 17.4 1168

PB1-CM1-65-2 PB1-CM2-65-2 73 2.875 2.76 7.88 110 4 5/16 6.54 9.97 2.76 6.8 11.4 15.8 20.5 1168

PB1-CM1-80-2 PB1-CM2-80-2 88.9 3.500 3.94 7.88 160 6 5/16 7.17 9.97 4.53 10.1 17.4 24.2 33 1168

PB1-CM1-90-2 PB1-CM2-90-2 101.6 4.000 3.94 7.88 160 6 5/16 7.72 9.97 4.14 10.3 17.6 24.2 33 1168

PB1-CM1-100-3 PB1-CM2-100-3 114.3 4.500 3.94 7.88 170 6 11/16 8.19 9.97 4.34 10.5 18 26.4 33 2226

PB1-CM1-125-3 PB1-CM2-125-3 141.3 5.563 4.34 7.88 180 7 1/16 9.3 9.97 4.14 11.9 20.2 28.6 37.4 2226

PB1-CM1-150-4 PB1-CM2-150-4 168.3 6.625 4.73 7.88 200 7 7/8 10.95 10.4 4.53 20.5 33 46.2 59.5 3483

PB1-CM1-175-5 PB1-CM2-175-5 193.7 7.625 5.52 9.85 240 9 7/16 11.89 12.37 5.52 26.4 44 63.9 81.5 5026

PB1-CM1-200-3 PB1-CM2-200-3 219.1 8.625 5.91 9.85 250 9 13/16 12.6 12.13 5.52 21.6 35.2 50.7 63.9 2226

PB1-CM1-200-6 PB1-CM2-200-6 219.1 8.625 5.91 9.85 250 9 13/16 14.34 13.63 5.52 52.9 83.7 114.6 143.3 8046

PB1-CM1-225-3 PB1-CM2-225-3 244.5 9.625 6.3 9.85 260 10 1/4 13.63 12.13 5.32 24.2 39.6 55.1 70.5 2226

PB1-CM1-225-6 PB1-CM2-225-6 244.5 9.625 6.3 9.85 270 10 5/8 15.44 13.63 5.71 57.3 90.3 125.6 158.7 8046

PB1-CM1-250-4 PB1-CM2-250-4 273 10.750 6.7 9.85 280 11 15.12 12.37 5.52 35.2 57.3 79.3 103.6 3483

PB1-CM1-250-7 PB1-CM2-250-7 273 10.750 6.7 9.85 280 11 16.54 13.63 5.52 61.7 99.2 134.4 169.7 11772

PB1-CM1-300-4 PB1-CM2-300-4 323.9 12.750 7.49 11.82 320 12 5/8 17.56 14.53 6.11 48.5 77.1 108 136.6 3483

PB1-CM1-300-6 PB1-CM2-300-6 323.9 12.750 7.49 11.82 320 12 5/8 18.67 15.6 6.11 77.1 123.4 167.5 213.8 8046

PB1-CM1-300-8 PB1-CM2-300-8 323.9 12.750 7.49 11.82 320 12 5/8 20.71 16.15 6.11 119 176.3 233.6 293.2 16314

PB1-CM1-350-6 PB1-CM2-350-6 355.6 14.000 8.27 11.82 340 13 3/8 19.93 15.6 6.3 85.9 136.6 189.5 240.3 8046

PB1-CM1-350-7 PB1-CM2-350-7 355.6 14.000 8.27 11.82 340 13 3/8 19.93 15.6 6.3 85.9 136.6 189.5 240.3 11772

PB1-CM1-350-9 PB1-CM2-350-9 355.6 14.000 8.27 11.82 340 13 3/8 22.05 16.74 6.3 154.3 244.7 335.1 425.4 21274

PB1-CM1-400-6 PB1-CM2-400-6 406.4 16.000 9.45 11.82 360 14 3/16 22.45 15.4 6.11 103.6 163.1 222.6 282.1 8046

PB1-CM1-400-8 PB1-CM2-400-8 406.4 16.000 9.45 11.82 360 14 3/16 24.02 16.15 6.11 147.7 222.6 299.8 374.7 16314

PB1-CM1-400-10 PB1-CM2-400-10 406.4 16.000 9.45 11.82 370 14 9/16 25.12 18.31 6.5 240.3 376.9 513.6 650.3 29431

PB1-CM1-450-6 PB1-CM2-450-6 457.2 18.000 10.63 11.82 390 15 3/8 24.57 15.4 6.3 116.8 187.3 255.7 324 8046

PB1-CM1-450-9 PB1-CM2-450-9 457.2 18.000 10.63 11.82 390 15 3/8 26.15 16.74 6.3 200.6 319.6 440.9 562.1 21274

132

20852 19/09/11 Proof 3

PIPE CLAMP BASE wITH COMLIN MAx. TEMPERATURE 572ºF

D

A

C

E

B

C

A D

C

C C

A

C

A

D

A

CC

CC

A

Order by Part Number, Comlin type and Comlin grade e.g. Pbi-Cm1-150-4/816/Fr80material: Carbon steel and Comlin. also available in stainless steel.Pipe Clamp bases with other load Capacities are also available.* do not exceed the maximum temperature for the grade of Comlin used.

PB2

PB3

PB4

PB1

TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE STATED VERTICAL LOAD CAPACITY.

TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.

TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR VERTICAL PIPES.

PART NUMBER FORCOMLIN TYPE816, 916, 818 & 918

PART NUMBER FORCOMLIN TYPE817 & 917

Pipe O/D A B C D EMax

LaggingThickness

WEIGHT

LoadCapacity

(Seenotes)

For Multi-Leg types, replace PB1 withPB2, PB3 or PB4

mm in in in mm in in in inPB1lbs

PB2lbs

PB3lbs

PB4lbs

lbs

PB1-CM1-450-11 PB1-CM2-450-11 457.2 18.000 10.63 11.82 400 15 3/4 28.19 19.69 6.7 335.1 531.3 725.3 921.5 39683

PB1-CM1-500-6 PB1-CM2-500-6 508 20.000 11.82 15.75 440 17 5/16 27.33 19.34 7.29 147.7 242.5 335.1 429.9 8046

PB1-CM1-500-9 PB1-CM2-500-9 508 20.000 11.82 15.75 450 17 11/16 28.19 20.67 7.68 251.3 416.6 579.8 745.1 21274

PB1-CM1-500-12 PB1-CM2-500-12 508 20.000 11.82 15.75 460 18 1/8 30.32 23.63 8.08 416.6 679 941.3 1203.7 50761

PB1-CM1-550-6 PB1-CM2-550-6 558.8 22.000 13 15.75 460 18 1/8 29.38 19.34 7.09 163.1 266.7 370.3 476.1 8046

PB1-CM1-550-8 PB1-CM2-550-8 558.8 22.000 13 15.75 470 18 1/2 30.24 20.08 7.49 227 361.5 493.8 628.3 16314

PB1-CM1-550-10 PB1-CM2-550-10 558.8 22.000 13 15.75 480 18 7/8 31.26 22.25 7.88 370.3 606.2 844.3 1080.2 29431

PB1-CM1-550-13 PB1-CM2-550-13 558.8 22.000 13 15.75 490 19 5/16 34.34 25.6 8.27 663.5 1075.8 1488.1 1900.3 62005

PB1-CM1-600-6 PB1-CM2-600-6 609.6 24.000 14.18 15.75 490 19 5/16 32.29 19.73 7.29 216 332.8 447.5 564.3 8046

PB1-CM1-600-8 PB1-CM2-600-8 609.6 24.000 14.18 15.75 490 19 5/16 32.29 20.08 7.29 246.9 394.6 542.3 690 16314

PB1-CM1-600-10 PB1-CM2-600-10 609.6 24.000 14.18 15.75 500 19 11/16 33.31 22.25 7.68 403.4 663.5 925.9 1186 29431

PB1-CM1-600-13 PB1-CM2-600-13 609.6 24.000 14.18 15.75 520 20 1/2 36.38 25.6 8.47 727.5 1186 1642.4 2101 62005

PB1-CM1-650-6 PB1-CM2-650-6 660.4 26.000 15.36 15.75 540 21 1/4 34.34 19.73 8.08 240.3 370.3 502.6 634.9 8046

PB1-CM1-650-8 PB1-CM2-650-8 660.4 26.000 15.36 15.75 540 21 1/4 35.12 20.08 8.08 275.5 443.1 610.6 778.2 16314

PB1-CM1-650-10 PB1-CM2-650-10 660.4 26.000 15.36 15.75 550 21 5/8 35.36 22.25 8.47 447.5 742.9 1038.3 1333.7 29431

PB1-CM1-650-13 PB1-CM2-650-13 660.4 26.000 15.36 15.75 570 22 7/16 38.67 26.38 9.26 850.9 1364.6 1880.5 2396.4 62005

PB1-CM1-700-6 PB1-CM2-700-6 711.2 28.000 16.54 19.69 560 22 1/16 36.38 23.67 7.88 275.5 436.5 597.4 756.1 8046

PB1-CM1-700-8 PB1-CM2-700-8 711.2 28.000 16.54 19.69 570 22 7/16 37.09 24.02 8.27 321.8 526.9 731.9 939.1 16314

PB1-CM1-700-10 PB1-CM2-700-10 711.2 28.000 16.54 19.69 580 22 13/16 38.59 26.19 8.67 526.9 888.4 1247.8 1609.3 29431

PB1-CM1-700-13 PB1-CM2-700-13 711.2 28.000 16.54 19.69 590 23 1/4 40.79 30.32 9.06 974.4 1591.7 2209 2824.1 62005

PB1-CM1-750-6 PB1-CM2-750-6 762 30.000 17.72 19.69 590 23 1/4 38.43 23.67 8.08 297.6 471.7 648.1 822.3 8046

PB1-CM1-750-8 PB1-CM2-750-8 762 30.000 17.72 19.69 590 23 1/4 39.22 24.02 8.08 346.1 566.5 789.2 1009.7 16314

PB1-CM1-750-10 PB1-CM2-750-10 762 30.000 17.72 19.69 600 23 5/8 40.56 26.97 8.47 604 994.2 1382.2 1772.5 29431

PB1-CM1-750-13 PB1-CM2-750-13 762 30.000 17.72 19.69 620 24 7/16 42.76 30.32 9.26 1049.3 1721.8 2394.2 3064.4 62005

PB1-CM1-800-6 PB1-CM2-800-6 812.8 32.000 18.9 19.69 610 24 40.4 23.67 7.88 317.4 507 694.4 881.8 8046

PB1-CM1-800-8 PB1-CM2-800-8 812.8 32.000 18.9 19.69 620 24 7/16 41.19 24.02 8.27 372.5 612.8 853.1 1093.4 16314

PB1-CM1-800-10 PB1-CM2-800-10 812.8 32.000 18.9 19.69 630 24 13/16 42.68 26.97 8.67 650.3 1071.4 1494.7 1915.8 29431

PB1-CM1-800-13 PB1-CM2-800-13 812.8 32.000 18.9 19.69 640 25 3/16 44.89 30.32 9.06 1119.9 1840.8 2561.7 3284.8 62005

PB1-CM1-850-6 PB1-CM2-850-6 863.6 34.000 20.08 19.69 640 25 3/16 42.45 23.67 8.08 341.7 544.5 747.3 950.1 8046

PB1-CM1-850-8 PB1-CM2-850-8 863.6 34.000 20.08 19.69 640 25 3/16 43.23 24.02 8.08 396.8 654.7 912.7 1168.4 16314

133

20852 19/09/11 Proof 3

2

PIPE CLAMP BASE wITH COMLIN MAx. TEMPERATURE 572ºF

D

A

C

E

B

C

A D

C

C C

A

C

A

D

A

CC

CC

A

Order by Part Number, Comlin type and Comlin grade e.g. Pbi-Cm1-150-4/816/Fr80material: Carbon steel and Comlin. also available in stainless steel.Pipe Clamp bases with other load Capacities are also available.* do not exceed the maximum temperature for the grade of Comlin used.

PB1

TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE STATED VERTICAL LOAD CAPACITY.

TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.

TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR VERTICAL PIPES.

PART NUMBER FORCOMLIN TYPE816, 916, 818 & 918

PART NUMBER FORCOMLIN TYPE817 & 917

Pipe O/D A B C D EMax

LaggingThickness

WEIGHT

LoadCapacity

(Seenotes)

For Multi-Leg types, replace PB1 withPB2, PB3 or PB4

mm in mm in mm in mm in in lbs lbs lbs lbs lbs

PB1-CM1-850-10 PB1-CM2-850-10 863.6 34.000 20.08 19.69 650 25 9/16 44.65 26.97 8.47 692.2 1144.1 1596.1 2048 29431

PB1-CM1-850-13 PB1-CM2-850-13 863.6 34.000 20.08 19.69 670 26 3/8 47.72 30.32 9.26 1285.2 2061.3 2839.5 3615.5 62005

PB1-CM1-900-6 PB1-CM2-900-6 914.4 36.000 21.26 23.63 670 26 3/8 44.41 27.6 8.27 385.8 628.3 868.6 1111.1 8046

PB1-CM1-900-8 PB1-CM2-900-8 914.4 36.000 21.26 23.63 670 26 3/8 45.52 28.94 8.27 509.2 813.5 1117.7 1424.1 16314

PB1-CM1-900-10 PB1-CM2-900-10 914.4 36.000 21.26 23.63 680 26 3/4 46.7 30.91 8.67 784.8 1318.3 1851.8 2385.3 29431

PB1-CM1-900-13 PB1-CM2-900-13 914.4 36.000 21.26 23.63 690 27 3/16 50.95 34.26 9.06 1444 2347.9 3249.6 4153.5 62005

PB1-CM1-950-6 PB1-CM2-950-6 965.2 38.000 22.45 23.63 690 27 3/16 46.54 27.6 8.08 407.8 665.7 921.5 1179.4 8046

PB1-CM1-950-8 PB1-CM2-950-8 965.2 38.000 22.45 23.63 690 27 3/16 47.49 28.94 8.08 537.9 862 1186 1510.1 16314

PB1-CM1-950-10 PB1-CM2-950-10 965.2 38.000 22.45 23.63 700 27 9/16 48.67 30.91 8.47 831.1 1397.7 1964.3 2530.9 29431

PB1-CM1-950-13 PB1-CM2-950-13 965.2 38.000 22.45 23.63 720 28 3/8 53 34.26 9.26 1534.4 2500 3467.8 4433.4 62005

PB1-CM1-1000-6 PB1-CM2-1000-6 1016 40.000 23.63 23.63 720 28 3/8 48.59 27.6 8.27 434.3 707.6 983.2 1256.6 8046

PB1-CM1-1000-8 PB1-CM2-1000-8 1016 40.000 23.63 23.63 720 28 3/8 49.61 28.94 8.27 570.9 917.1 1263.2 1609.3 16314

PB1-CM1-1000-10 PB1-CM2-1000-10 1016 40.000 23.63 23.63 730 28 3/4 51.66 30.91 8.67 952.3 1556.4 2160.5 2764.5 29431

PB1-CM1-1000-13 PB1-CM2-1000-13 1016 40.000 23.63 23.63 740 29 1/8 55.04 34.26 9.06 1615.9 2638.9 3661.8 4684.8 62005