Comfortable - 4.imimg.com4.imimg.com/data4/TD/HL/MY-2503872/protective-coverall.pdf · SMS (Spun...
Transcript of Comfortable - 4.imimg.com4.imimg.com/data4/TD/HL/MY-2503872/protective-coverall.pdf · SMS (Spun...
Protective Coveralls by 3M3M has a select range of high quality stylish protective coveralls
offering breathable comfort and protection you can rely on.
The range provides peace of mind for effective use and protection
against many industrial hazards.
Main Features + Elasticated Hood, Waist and Ankles for convenient
safe wear and freedom of movement+ Two-way zip with storm flap for extra convenience
and protection from contaminants+ Gusset for increased robustness
(4530 and 4540 protective coveralls only)+ Knitted cuffs for increased wearer comfort (excluding 4520) + Anti-static treatment+ Coveralls by 3M contain no components made from
natural rubber latex or silicone+ Sizes: from M to XXL
Comfortableand lightweight
Take your safety personally
Symbol Title/Aspect Standard number
Protective clothing – chemical
Type 6 – protective performance against liquid chemicals (whole suit, reduced spray)
EN 13034
Type 5 – protective performance against solid airborne particulates
EN ISO 13982-1
Type 4 – protective performance against liquid chemicals (spray tight)
EN 14605
Protective Performance – Infective agents EN 14126
Protective performance against radioactive particulate contamination
EN 1073-2 (Class 1)
Protective Clothing – Electrostatic properties – surface resistivity
EN 1149-1
Protective Clothing – Heat and Flame EN 533 (Index 1)
Table of Symbols
112
Coveralls3M™ Protective
113
3M™ 4520 Protective Coverall 3M™ 4530 Protective Coverall
Features and Benefits:
Premium Protection+ Good protection against dust, and limited
liquid chemical splashes CE (Type 5/6)+ Offers limited protection against flame
and heat (EN533 Index 1/0, must be worn over Index 2 or 3 garment)
End User Comfort+ Breathable material
(SMS) for reduced heat stress+ 2-Way zip for extra convenience+ Resealable zip flap for additional protection+ Knitted cuffs for increased
wearer comfort+ Elastic hood, waist and ankle for excellent fit+ Good compatibility with other forms
of personal protective equipment+ Gusset for freedom of movement
Performance+ Anti-static treatment + Available in 4 sizes
The 3M 4520 lightweight protective coverall is made of breathable
material technology. This protective coverall offers CE Category III, Type
5/6 protection against dust and limited liquid chemical splash. With
elasticated hood, waist, cuffs and ankles, and a two-way zip, comfort,
convenience and freedom of movement is ensured.
3M™ 4530 Protective Coverall Type 5/6Colour: blue with white back panelCE Category IIISizes: M, L, XL, XXL
Features and Benefits:
Premium Protection+ Good protection against dust and limited
liquid chemical splashes (Type 5/6)
Comfort+ Latest Breathable material (SMMMS)
for reduced heat stress+ Extremely Lightweight material+ Elasticated hood, waist and ankle
for good fit+ 2-Way zip for extra convenience
Performance+ Anti-static treatment+ Available in 4 sizes
Latest Material Technology
With 3 layers of melt blown polypropylene in-between 2 layers of spun bond polypropylene, the 4520 material is specially designed to maximise breathability and air flow, yet provide good protection against dust and liquid chemical splash.
Typical Applications+ Light duty
Maintenance and Repair
+ Insulation Laying+ Farming/Abattoirs+ Construction Work
+ Wood/Metal Processing
+ Light Paint Spraying+ Pharmaceutical
Manufacture+ Low Level Chemical
Handling
Made of a soft and breathable material and with further features,
including knitted cuffs and a 2-way zip, the 3M 4530 protective coverall
offers the user excellent comfort. Additionally, unique to the product is
a flame retardant coating offering limited protection against flame and
heat.
3M™ 4520 Protective Coverall Type 5/6Colour: white with green back panelCE Category IIISizes: M, L, XL, XXL
SMS (Spun bond, Melt blown, Spun bond polypropylene)-Material used in the 3M 4530 and the backpanel of the 3M 4540:
The combination of three layers of polypropylene brings increased protection and breathability. The melt blown is inserted with hot air and acts as a chemical barrier. The other two layers make the coverall soft and breathable.
3 layers of Polypropylene (Spun bond, Melt blown, Spun bond)
Fabric Material
Typical Applications+ Food Processing+ Wood/Metal Processing+ Welding+ Insulation Laying+ Light Paint Spraying+ Low Level chemical Handling+ Farming/Abattoirs+ Light duty Maintenance
114
Coveralls3M™ Protective
115
Made of a high-quality microporous laminated fabric, the 3M 4540
protective coverall offers CE Category III, Type 5/6 protection against
dust and limited liquid chemical splash and hazardous dust, with an
exclusive breathable (SMS) panel on the back significantly improves air
circulation and therefore reduces heat stress.
Typical Applications+ Paint Spraying+ Powder Coating+ Resin Application+ Light-Duty Industrial Cleaning and Maintenance+ Pharmaceutical Processing
3M™ 4540 Protective Coverall 3M™ 4560 Protective Coverall
Features and Benefits:
Premium Protection+ Excellent barrier against dry particles and
limited liquid chemical splash (CE Type 5/6)+ Laminated microporous material with
low-linting properties
Comfort+ Back panel made of breathable SMS material
for improved air circulation and reduced heat stress
+ 2-Way zip for extra convenience+ Resealable zip flap for additional protection+ Knitted cuffs for increased wearer comfort+ Elastic hood, waist and ankle
for comfortable fit
Performance+ Anti-static treatment+ Low-linting+ Available in 4 sizes
Features and Benefits:
Premium Protection+ Excellent barrier against dry particles, liquid
chemical splash and limited spray+ Laminated microporous material with
good chemical resistance, robustness and low-linting properties
+ Taped seams across the suit for better protection and increased durability
+ Meets EN 14126 for biological protection (infective agents)
Comfort+ 2-Way zip for extra convenience+ Resealable zip flap for additional protection+ Knitted cuffs for increased wearer comfort+ Elastic hood, waist and ankle
for comfortable fit
Performance+ Anti-static treatment+ Low-linting+ Available in 4 sizes
3M™ 4540 Protective Coverall Type 5/6Colour: white with blue back panelCE Category IIISizes: M, L, XL, XXL
3M™ 4560 Protective Coverall Type 4/5/6Colour: white with red seamsCE Category IIISizes: M, L, XL, XXL
Made of a high-quality microporous laminated fabric, the 3M 4560
protective coverall features taped seams for increased protection
against fine particles and liquid chemical sprays. It also meets the
requirements of the European standard EN14126 for biological
protection against infective agents.
Typical Applications+ Asbestos Handling/Removal+ Protection against Infective Agents + Pharmaceutical Processing
Laminated microporous fabric-Material used in the 3M™ 4540 and 3M™ 4560 Protective Coveralls:
The association of one layer of polypropylene and one layer of high-quality PE laminate gives excellent performance and barrier efficiency . This fabric is low-linting and robust.
The patented back panel on the 4540 Protective Coverall helps to improve air circulation and have a cooling effect
Fabric Material
Microporous laminate fabric, Polypropylene
and high quality Polyethylene
laminate
Laminated microporous fabric-Material used in the 3M™ 4540 and 3M™ 4560 Protective Coveralls:
The association of one layer of polypropylene and one layer of high-quality PE laminate gives excellent performance and barrier efficiency.
Fabric Material
Microporous laminate fabric, Polypropylene
and high quality Polyethylene
laminate
3M™ 450 Overboots
*
* This product meets the requirements of the whole suit Type 4 spray test but excludes the permeation aspect of the Type 4 standard.
116
Coveralls3M™ Protective
117
3M™ 450 OverbootsThe 3M 450 overboots are the latest addition to the 3M range of
protective garments. Offered to the market as an accessory to protect
footwear and clothing, the overboots are made polypropylene laminated,
with a sole designed to reduce the risk of slipping. They come elasticated
at the calf with material ties to ensure a good fit.
3M™ 450 Protective OverbootColour: whiteAccessorySizes: Universal
Although the 3M 450 overboot upper is manufactured from a fabric which has liquid splash and dust barrier properties (suitable for Type 5/6), it is not intended as primary protection to the foot, and therefore it is not CE marked as Personal Protective Equipment.
Not suitable for use in environments where the product
may come into contact with heat or flame.
3M™ Product Selection Model 4520 Model 4530 Model 4540 Model 4560
Some Typical Applications
Applications: Protection against Particles
Inspection of areas contaminated with asbestos
Asbestos stripping
Insulation laying
Woodworking
Welding (worn over an EN 533 Index 2 or 3 garment)
Metal grinding/polishing
Fine coal dust in power plants
Animal feeding/examining
Working with fungal spores, bacteria and powders
Wastewater treatment
Radioactive particulate dust
Applications: Protection against Liquids
Light-duty building cleaning
Medium-duty industrial cleaning work
Machine/vehicle maintenance and cleaning
Spray painting (non-isocyanate paints)
Tank cleaning and maintenance
Dairies & tending to animals
Infective agents (contact with blood)
Choose the Right Protective Coverall
Product/Protection Level Aspect Standard Model 4520 Model 4530 Model 4540 Model 4560
Chemical Protective Clothing EN 340
Type 6 Splash Tight
EN 13034
Type 5Dust Tight
EN ISO 13982-1
Type 4Spray Tight
EN 14605
Infective Agents EN 14126
Electrostatic Properties EN 1149-1
Particulate Radioactive Contamination
EN 1073-2 (Class 1)
Heat and Flame EN 533 (Index 1)
Elasticated Hood, Waist and Ankles Two-Way Zip Knitted Cuffs
This guide is only an outline. It should not be used as the only means for selecting protective clothing. Details regarding performance and limitations are set out on the packaging and user instruc-tions. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional or 3M – www.3M.eu/safety Please note that the personal protective equipment (PPE) shown highlight some of the products which may be considered. Sections of the most appropriate PPE will depend on the particular situation and should be made only by a competent person knowledgable of the actual working conditions and the limitations of PPE.
*
* This product meets the requirements of the whole suit Type 4 spray test but excludes the permeation aspect of the Type 4 standard.