Comba Antenna and Subsystem Product Catalogue v1.0_2009

Antenna & Subsystem

Product Catalogue

July 2009

4

Microwave anechoic chamber 40mx20mx20m

Summitek PIM test equipment

8-port network analyzer

Vibration testing

Outdoor far field testing

Electrical testing

Antenna production facility

Introduction

Outdoor Directional Panel Antenna ODP-065R15Bx XPol, 806-960MHz, 65°, 15.5dBi

Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com

6

Technical Specifications

Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 15.0 15.5 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 13 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 16 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power Per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1315x265x141 (51.6x10.4x5.6) Weight, without Mounting Kit kg (lb) 9.5 (20.9) Weight, with Mounting Kit kg (lb) 15.5 (34.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1580x330x210 (62.2x13.0x8.3) Shipping Weight kg (lb) 18.3 (40.3)

Antenna Pattern

Vertical Pattern

Horizontal Pattern

824MHz @ 0o 915MHz @ 0o 960MHz @ 0o

Outdoor Directional Panel Antenna ODP-065R17Bx XPol, 806-960MHz, 65°, 17dBi


7

Vertical pattern

Horizontal pattern

870MHz @0o 915MHz @0o 960MHz @0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 16.7 17.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 9 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 19 Null Fill dB < 22 Front-To-Back Ratio dB > 29 VSWR ≤ 1.3:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 2093x265x141 (82.3x10.4x5.5) Weight, without Mounting Kit kg (lb) 18.4 (40.6) Weight, with Mounting Kit kg (lb) 24.0 (52.9) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2195x320x250 (86.3x12.6x9.8) Shipping Weight kg (lb) 29 (63.9)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-065R18Bx XPol, 806-960MHz, 65°, 18dBi


8

Vertical pattern

Horizontal pattern

824MHz @ 0o 915MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 17.7 18.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 2613x265x141 (102.7x10.4x5.6) Weight, without Mounting Kit kg (lb) 22.3 (49.2) Weight, with Mounting Kit kg (lb) 28.0 (61.7) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(08) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2715x320x250 (106.9x12.6x9.8) Shipping Weight kg (lb) 30.0 (66.1)

Antenna Pattern



9

Vertical pattern

Horizontal pattern

824MHz @ 0o 860MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 824-896 870-960 Polarization ± 45 Gain dBi 13.5 13.8 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 14 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1392x272x148 (54.8x10.7x5.8) Weight, without Mounting Kit kg (lb) 12 (26.5) Weight, with Mounting Kit kg (lb) 17 (37.5) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1655x320x195 (65x12.6x7.7) Shipping Weight kg (lb) 20 (44.1)

Antenna Pattern



10

Vertical pattern

Horizontal pattern

824MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 16.7 17.0 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 7.4 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 21 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern

Outdoor Directional Panel Antenna ODP-065V15Bx VPol, 824-960MHz, 65°, 16.0dBi


11

Vertical pattern

Horizontal pattern

824MHz @ 0o 890MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization Vertical Gain dBi 15.0 16.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 14 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 First Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 28 VSWR ≤ 1.35:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 200 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 1315x280x124 (51.7x11.0x4.9) Weight, without Mounting Kit kg (lb) 12.7 (28.0) Weight, with Mounting Kit kg (lb) 15.0 (33.1) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1595x335x230 (62.7x13.2x9.0) Shipping Weight kg (lb) 18.5 (40.8)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-065V17Bx VPol, 824-960MHz, 65°, 17dBi


12

Vertical pattern

Horizontal pattern

820MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 824-896 870-960 Polarization Vertical Gain dBi 16.7 17.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 10 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 2095x265x141 (82.3x10.4x5.5) Weight, without Mounting Kit kg (lb) 19.5 (41.9) Weight, with Mounting Kit kg (lb) 24.7 (54.5) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2395x375x265 (94.1x14.7x10.4) Shipping Weight kg (lb) 26.6 (58.6)

Antenna Pattern



13

Vertical pattern

Horizontal pattern

824MHz @ 0o 915MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization Vertical Gain dBi 17.7 18.2 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 2615x280x124 (102.8x11.0x4.9) Weight, without Mounting kit kg (lb) 20.0 (44.1) Weight, with Mounting kit kg (lb) 25.5 (56.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(08) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2880x335x230 (113.4x13.2x9.1) Shipping Weight kg (lb) 31.5 (69.4)

Antenna Pattern



14

Vertical pattern

Horizontal pattern

824MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization Vertical Gain dBi 16.9 17.2 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 7.5 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 26 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 2615x265x141 (102.8x10.4x5.6) Weight, without Mounting Kit kg (lb) 19 (41.9) Weight, with Mounting Kit kg (lb) 24 (52.9) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(08) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2795x375x275 (109.8x14.7x10.8) Shipping Weight kg (lb) 27 (59.5)

Antenna Pattern

Outdoor Directional Panel Antenna ODV-032R20B XPol, 806-960MHz, 32°, 20dBi


15

Vertical pattern

Horizontal pattern

824MHz @ 0o 915MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-960 Polarization ± 45 Gain dBi 20 Horizontal Beamwidth deg 32 Vertical Beamwidth deg 10 Electrical Downtilt Range deg 0-10 First Upper Sidelobe Suppression dB > 17 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1977x560x141 (77.7x22.0x5.6) Weight, without Mounting Kit kg (lb) 40 (88.2) Weight, with Mounting Kit kg (lb) 46 (101.4) Radome Material and Color UV Resistant PVC, Light Grey, RL7035 Mounting Kit 00-ZJ11(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2309x704x300 (90.7x27.7x11.8) Shipping Weight kg (lb) 62 (136.7)

Antenna Pattern

Outdoor Directional Panel Antenna ODV-065R15B XPol, 806-960MHz, 65°, 15.5dBi


16

Vertical pattern

Horizontal pattern

830MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 15.0 15.5 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 14 Electrical Downtilt Range deg 0-14 First Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 28 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1415x265x141 (55.7x10.4x5.6) Weight, without Mounting Kit kg (lb) 13 (28.7) Weight, with Mounting Kit kg (lb) 18 (39.7) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3)

Shipping Dimensions, HxWxD mm (in) 1565x320x270 (61.6x12.6x10.6)

Shipping Weight kg (lb) 20 (44.1)

Antenna Pattern



17

Vertical pattern

Horizontal pattern

806MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 16.5 17.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 10 Electrical Downtilt Range deg 0-10 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1975x265x141 (77.6x10.4x5.6) Weight, without Mounting Kit kg (lb) 16.5 (36.4) Weight, with Mounting Kit kg (lb) 22.0 (48.5) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(00) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2360x335x230 (92.9x13.2x9.1) Shipping Weight kg (lb) 22.5 (49.6)

Antenna Pattern



18

Vertical pattern

Horizontal pattern

806MHz @ 0o 870MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 Polarization ± 45 Gain dBi 17.1 17.6 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 7 Electrical Downtilt Range deg 0-7 First Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 20 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 2615x265x141 (103.0x10.4x5.6) Weight, without Mounting Kit kg (lb) 20.0 (44.1) Weight, with Mounting Kit kg (lb) 25.5 (56.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(08) Reflector Material Zinc Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2915x375x280 (114.6x14.7x11.0) Shipping Weight kg (lb) 32.0 (70.5)

Antenna Pattern



19

Vertical pattern

Horizontal pattern

824MHz @ 0o 896MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 806-960 Polarization ± 45 Gain dBi 15.5 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 10 Electrical Downtilt Range deg 0-10 First Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 30 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1975x265x141 (77.8x10.4x5.6) Weight, without Mounting Kit kg (lb) 18 (39.7) Weight, with Mounting Kit kg (lb) 24 (52.9) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2270x375x275 (89.2x14.7x10.8) Shipping Weight kg (lb) 26 (57.3)

Antenna Pattern



20

Vertical pattern

Horizontal pattern

824MHz @ 0o 930MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 824-896 870-960 Polarization ± 45 Gain dBi 16.5 16.8 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 7.5 Electrical Downtilt Range deg 0-7 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.35:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern

Outdoor Directional Panel Antenna ODP-065R15Kx XPol, 1710-2170MHz, 65°, 15.6dBi


21

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 15.2 15.4 15.6 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 12 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 710x173x90 (27.9x6.8x3.5) Weight, without Mounting Kit kg (lb) 4.0 (8.8) Weight, with Mounting Kit kg (lb) 5.2 (11.5) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-14C(20) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 900x260x190 (35.4x10.2x7.5) Shipping Weight kg (lb) 7.0 (15.4)

Antenna Pattern



22

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 17.8 18.0 18.3 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3, 6 First Upper Sidelobe Suppression dB ≥ 18 Null Fill dB ≤ 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern



23

Vertical pattern

Horizontal pattern

1850MHZ @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 20.0 20.3 20.6 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 4 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.4:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 150 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern



24

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 16.5 16.7 17.0 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 Upper Sidelobe Suppression (0-30 o) dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern

Outdoor Directional Panel Antenna ODP-065V18Kx VPol, 1710-2170MHz, 65°, 18.3dBi


25

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1850MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1850 1850-1990 1990-2170 Polarization Vertical Gain dBi 17.8 18.0 18.3 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 7 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 Front-To-Back Ratio dB > 30 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1310x138x181 (51.5x5.4x7.1) Weight, without Mounting Kit kg (lb) 7.5 (16.5) Weight, with Mounting Kit kg (lb) 11.0 (24.3) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ06(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1420x215x175 (55.8x8.4x6.9) Shipping Weight kg (lb) 13.0 (28.7)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-090V17Kx VPol, 1710-2170MHz, 90°, 17.1dBi


26

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1850 1850-1990 1990-2170 Polarization Vertical Gain dBi 16.7 16.9 17.1 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 6.8 Electrical Downtilt – Fixed (Options) deg 0, 2, 4, 6 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 1310x173x81 (51.7x6.8x3.2) Weight, without Mounting Kit kg (lb) 6.0 (13.2) Weight, with Mounting Kit kg (lb) 11.5 (25.4) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-14C(10) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1435x230x210 (56.5x9.1x8.3) Shipping Weight kg (lb) 12.5 (27.6)

Antenna Pattern

Outdoor Directional Panel Antenna ODV-065R15K XPol, 1710-2170MHz, 65°, 15.3dBi


27

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 14.7 15.0 15.3 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 13 Electrical Downtilt Range deg 0-16 First Upper Sidelobe Suppression dB > 15 Front-To-Back Ratio dB > 26 VSWR ≤ 1.5:1 Isolation Between Ports dB > 28 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 743x173x81 (29.2x6.8x3.2) Weight, without Mounting Kit kg (lb) 4.8 (10.6) Weight, with Mounting Kit kg (lb) 6.0 (13.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-14C Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200(124.3) Shipping Dimensions, HxWxD mm (in) 940x260x190 (37.0x10.2x7.5) Shipping Weight kg (lb) 8.3 (18.3)

Antenna Pattern



28

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 17.6 17.8 18.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 6.5 Electrical Downtilt Range deg 0-8 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 18 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 100 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern



29

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1850 1850-1990 1990-2170 Polarization Vertical Gain dBi 16.3 16.5 16.7 Horizontal Beamwidth deg 90 Vertical Beamwidth deg 6.8 Electrical Downtilt Range deg 0-8 First Upper Sidelobe Suppression dB > 18(0o), >15(4o), > 13(8o) Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 100 Impedance Ω 50 Lightning Protection Direct Ground Mechanical Dimensions, HxWxD mm (in) 1310x173x81 (51.5x6.8x3.2) Weight, without Mounting Kit kg (lb) 9.0 (19.8) Weight, with Mounting Kit kg (lb) 14.5 (32.0) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-14C(10) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1435x230x210 (56.5x9.1x8.3) Shipping Weight kg (lb) 16.5 (36.4)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-065R15Bx/17Kx XXPol, 806-960/1710-2170MHz, 65°, 14.6/16.7dBi


30

Vertical pattern

Horizontal pattern

870MHz @ 0o 1880MHz @ 0o 2170MHz @ 0o


Electrical

Frequency Range MHz 806- 896

870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 14.2 14.6 16.4 16.5 16.7 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 16 15 7 6 6 Electrical Downtilt – Fixed (Options) deg 0/0, 3/5, 5/3, 6/6 First Upper Siderlobe Suppression dB > 16 Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1200x265x141 (47.2x10.4x5.5) Weight, without Mounting Kit kg (lb) 11 (22.3) Weight, with Mounting Kit kg (lb) 18 (39.7) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1505x375x280 (59.3x14.7x11) Shipping Weight kg (lb) 20 (44.1)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-065R17Bx/18Kx XXPol, 806-960/1710-2170MHz, 65°, 16.7/18.0dBi


31

Vertical pattern

Horizontal pattern

870MHz @ 0o 1710MHz @ 0o 1880MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 1710-2170 Polarization ± 45 Gain dBi 16.3 16.7 18.0 Horizontal Beamwidth deg 65 65 Vertical Beamwidth deg 10.0 6.5 Electrical Downtilt – Fixed (Options) deg 0/0, 3/5, 5/3, 6/6 First Upper Sidelobe Suppression dB > 15 > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 30 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 29 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -145 Maximum Power per Port W 500 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1970x270x145 (77.4x10.6x5.7) Weight, without Mounting Kit kg (lb) 28 (61.7) Weight, with Mounting Kit kg (lb) 34 (75.0) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2255x360x245 (88.6x14.1x9.6) Shipping Weight kg (lb) 38 (83.8)

Antenna Pattern

Outdoor Directional Panel Antenna ODP-065R18Bx/18Kx XXPol, 806-2170MHz, 65°, 17.7/18.0dBi


32

Vertical pattern

Horizontal pattern

930MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 806-896 870-960 1710-2170 Polarization ± 45 Gain dBi 17.3 17.7 18.0 Horizontal Beamwidth deg 65 60 Vertical Beamwidth deg 7.5 6.5 Electrical Downtilt – Fixed (Options) deg 0/0, 2/2, 5/3, 4/4, 6/6 First Upper Sidelobe Suppression dB > 15 > 18 Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power Per Port W 500 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 2613x272x140 (102.9x10.7x5.5) Weight, without Mounting Kit kg (lb) 20.0 (44.1) Weight, with Mounting Kit kg (lb) 25.5 (56.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(08) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2880x335x230 (113.4x13.2x9.1) Shipping Weight kg (lb) 29.0 (63.9)

Antenna Pattern

Outdoor Directional Dual-band Antenna ODV-065R14B17K XXPol, 806-960/1710-2170MHz, 65°, 14.0/17.0dBi


33

Vertical pattern

Horizontal pattern

900MHz @ 0o 1770MHz @ 0o 2170MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 13.5 14.0 16.5 16.7 17.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 15 7 Electrical Downtilt Range deg 0-14 0-7

First Upper Sidelobe Suppression dB ≥17(0o),

≥16(7o),≥14(14o) ≥17(0o),

≥15(4o),≥14 (7o) Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1200x265x141 (47.2x10.4x5.6) Weight, without Mounting Kit kg (lb) 15 (33.1) Weight, with Mounting Kit kg (lb) 21 (46.3) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(00) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1505x375x280 (59.3x14.9x11.0) Shipping Weight kg (lb) 25 (61.7)

Antenna Pattern



34

Vertical pattern

Horizontal pattern

870MHz @ 0o 1850MHz @ 0o 2170MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 14.5 15.0 17.0 17.2 17.2 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 13 6 Electrical Downtilt Range deg 0-14 0-7


≥17(7o),≥15(14o) ≥18(0o),≥16(4o),

≥15(7o)

Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern

Outdoor Directional Twin Antenna ODV-065R17B17B XXPol, 806-960/880-960MHz, 65°, 16.3/16.5dBi


35

Vertical pattern

Horizontal pattern

870MHz @ 0o 880MHz @ 0o 900MHz @ 0o


Electrical Frequency Range MHz 806-960 / 880-960 Polarization ± 45 Gain dBi 16.3 / 16.5 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 10 Electrical Downtilt Range deg 0-10 / 0-10 First Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 30 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 500 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern



36

Vertical pattern

Horizontal pattern

840MHz @ 00 1850MHz @ 00 2170MHz @ 00


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 16.1 16.3 16.9 17.0 17.2 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 9.5 6.0 Electrical Downtilt Range deg 0-10 0-7


≥15(5o),≥12(10o) ≥18(0o),

≥ 17(4o), ≥ 15(7o) Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 > 18 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1975x265x141 (77.6x10.4x5.5) Weight, without Mounting Kit kg (lb) 20.0 (44.0) Weight, with Mounting Kit kg (lb) 25.5 (56.2) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit 00-ZJ10(12) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2270x375x280 (89.2x14.7x11.1) Shipping Weight kg (lb) 32.0 (70.5)

Antenna Pattern



37

Vertical pattern

Horizontal pattern

860MHz @ 0o 1880MHz @ 0o 2170MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 16.7 17.2 17.5 17.6 17.8 Horizontal Beamwidth deg 65 63 Vertical Beamwidth deg 7.5 6.0 Electrical Downtilt Range deg 0-7

First Upper Sidelobe Suppression dB >17(0o), >15(4o),

> 12(7o) >18(0o),

>17(4o), >15(8o) Null Fill dB < 22 Front-To-Back Ratio dB > 25 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern

Outdoor Directional Twin Antenna ODV-065R18K18K XXPol, 1710-2170/1710-2170MHz, 65°, 18.0/18.0dBi


38

Vertical pattern

Horizontal pattern

1850MHz @ 0o 1990MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 17.4 17.8 18.0 Horizontal Beamwidth deg 65 63 Vertical Beamwidth deg 6.5 Electrical Downtilt Range deg 0-8 First Upper Sidelobe Suppression dB > 16 Null Fill dB < 22 Front-To-Back Ratio dB > 28 VSWR ≤ 1.5:1 Isolation Between Ports dB > 30 Cross-polar Discrimination @ 0o dB > 18 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1310x320x110 (51.5x12.6x4.3) Weight, without Mounting Kit kg (lb) 20.0 (44.1) Weight, with Mounting Kit kg (lb) 25.0 (55.1) Radome Material and Color UV Resistant PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(17) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 2 x or 4 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1605x395x200 (63.1x15.5x7.9) Shipping Weight kg (lb) 27.5 (60.6)

Antenna Pattern

Outdoor Directional Dual-band Antenna

ODV-065R15B15K15K XXXPol, 806-960/1710-2170/1710-2170MHz, 65°, 15.0/14.9/15.1dBi


39

Vertical pattern

Horizontal pattern

900MHz @ 0o 1795MHz @ 0o 1990MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization deg ± 45 Top 14.8 14.9 14.9

Gain Bottom

dBi 14.5 15.0 15.0 15.1 15.1

Horizontal Beamwidth deg 65 65 66 65 64 Vertical Beamwidth deg 13 11 12 11 11 Electrical Downtilt Range deg 0-12


≥13(6o),≥12(12o) ≥15(0o),≥14(6o),

≥13(12o)

Front-To-Back Ratio dB > 25 (typ. >28) VSWR ≤ 1.5:1 Isolation Between Ports dB > 28 (typ. >30) Isolation Between Ports (B/K, K/K) dB > 40, 36 (typ. >50, 40) Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground


Antenna Pattern




40

Vertical pattern

Horizontal pattern

900MHz @ 0o 1795MHz @ 0o 1990MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170


Gain Bottom

dBi 15.8 16.0 16.4 16.5 16.5

Horizontal Beamwidth deg 65 65 66 65 63 Vertical Beamwidth deg 10.0 9.0 9.5 8.5 7.5 Electrical Downtilt Range deg 0-10


≥15(5o),≥11(10o) ≥17(0o),≥15(4o),

≥12(7o)



Antenna Pattern




41

Vertical pattern

Horizontal pattern

900MHz @ 0o 1795MHz @ 0o 1990MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170


Gain Bottom

dBi 16.1 16.5 16.7 16.7 16.6

Horizontal Beamwidth deg 65 65 66 65 63 Vertical Beamwidth deg 8.0 7.0 8.0 7.5 7.0 Electrical Downtilt Range deg 0-7


≥16(4o),≥15(7o) ≥17(0o),≥16(3o),

≥15(7o)



Antenna Pattern

Outdoor Omni-directional Antenna OOA-360V11Ax VPol, 824-896MHz, 360°, 11dBi


42

Vertical pattern

Horizontal pattern

824MHz @ 0o 860MHz@ 0o 896MHz@ 0o


Electrical Frequency Range MHz 824-896 Polarization Vertical Gain dBi 11 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3, 5 Pattern Circularity dB ≤ 1 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, LxDia mm (in) 3510x52 (138.2x2.0) Weight, without Mounting Kit kg (lb) 11.5 (25.4) Weight, with Mounting Kit kg (lb) 11.7 (25.8) Radome Material and Color Fiberglass, Light Grey, RAL7035 Mounting Kit Pole Mount included Radiating Element Material Brass Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 3550x240x112 (139.8x9.4x4.4)

One antenna / case 13.0 (28.7) Shipping Weight

Two antenna / case kg (lb)

25.0 (55.1)

Antenna Pattern

Outdoor Omni-directional Antenna OOA-360V11Gx-4 VPol, 885-960MHz, 360°, 11dBi


43

Vertical pattern

Horizontal pattern

885MHz @ 0o 925MHz @ 0o 960MHz @ 0o


Electrical Frequency Range MHz 885-960 Polarization Vertical Gain dBi 11 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3 Pattern Circularity dB ≤ 1 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 200 Impedance Ω 50 Lightning Protection Direct Ground




25.0 (55.1)

Antenna Pattern

Outdoor Omni-directional Antenna OOA-360V11Cx VPol, 1710-1880MHz, 360°, 11dBi


44

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1795MHz @ 0o 1880MHz @ 0o


Electrical Frequency Range MHz 1710-1880 Polarization Vertical Gain dBi 11 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0, 3 Pattern Circularity dB ≤ 1 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 500 Impedance Ω 50 Lightning Protection Direct Ground




16.0 (35.3)

Antenna Pattern

Outdoor Omni-directional Antenna OOA-360V11Px VPol, 1850-1990MHz, 360°, 11dBi


45

Vertical pattern

Horizontal pattern

1850MHz @ 0o 1920MHz @ 0o 1990MHz @ 0o


Electrical Frequency Range MHz 1850-1990 Polarization Vertical Gain dBi 11 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0 Pattern Circularity dB ≤ 1 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, LxDia mm (in) 1680x52 (66.1x2.0) Weight, without Mounting Kit kg (lb) 5.0 (11.0) Weight, with Mounting Kit kg (lb) 5.3 (11.6) Radome Material and Color Fiberglass, Light Grey, RAL7035 Mounting Kit Pole Mount included Radiating Element Material Copper Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 198 (123.1) Shipping Dimensions, HxWxD mm (in) 1770x255x140 (69.7x10.0x5.5)



11.0 (24.3)

Antenna Pattern

Outdoor Omni-directional Antenna OOA-360V11Fx VPol, 1920-2170MHz, 360°, 11.1dBi


46

Vertical pattern

Horizontal pattern

1920MHz @ 0o 2045MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1920-2170 Polarization Vertical Gain dBi 11.1 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 6.5 Electrical Downtilt – Fixed (Options) deg 0,3 Pattern Circularity dB ≤ 1 VSWR ≤ 1.4:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, LxDia mm (in) 1640x52 (64.6x2.0) Weight, without Mounting Kit kg (lb) 5.0 (11.0) Weight, with Mounting Kit kg (lb) 5.3 (11.6) Radome Material and Color Fiberglass, Light Grey, RAL7035 Mounting Kit Pole Mount included Radiating Element Material Copper Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1850x236x200 (72.8x9.3x7.9)



12.0 (26.4)

Antenna Pattern

3-in-1 Cluster Antenna MJS-065R15KV XPol, 1710-2170MHz, 65°, 15.3dBi


47

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 14.7 15.0 15.3 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 14 Electrical Downtilt Range deg 0-16 First Upper Sidelobe Suppression dB > 15 Front-To-Back Ratio dB > 26 VSWR ≤ 1.5:1 Isolation Between Ports dB > 28 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43dBm dBc < -150 Maximum Power per Port W 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Antenna 1080x358 (42.5 x14.1) Dimensions,

HxDia Pedestal mm (in)

320x370 (12.6 x14.6) Antenna 36 (79.4)

Weight Pedestal

kg (lb) 26 (57.3)

Radome Material and Color Fiberglass, White Azimuth Adjustment per Antenna deg ± 20 Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 6 x 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1180x265x465 (46.5 x10.4 x18.3) Shipping Weight kg (lb) 48 (105.8)

Antenna Pattern



48

Pedestal and Mounting Details

M16x80

310

RET Mounting with Remote Control Units

Bottom Flange

-20 0 +20

With RCU

Top Flange

RCU (optional)

8- 18

485485

Optional Accessories

The following components may be ordered separately: • Remote Control Unit : RCU-003 • Center Control Unit : CCU-001AG, CCU-003AG • Smart Bias Tee : BT-M1S, BT-M2S • RET Manager : COMETS • AISG Jumper and cable For more information, please refer to “Comba RET document”.



49

Vertical pattern

Horizontal pattern

1710MHz @ 0o 1920MHz @ 0o 2170MHz @ 0o


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization ± 45 Gain dBi 17.5 17.7 18.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 7 Electrical Downtilt Range deg 0-8 First Upper Sidelobe Suppression dB > 16 Front-To-Back Ratio dB > 26 VSWR ≤ 1.5:1 Isolation Between Ports dB > 28 Cross-polar Discrimination @ 0o dB > 17 3rd Order Intermodulation @ 2x43dBm dBc < -150 Maximum Power Per Port W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Antenna 1690x358 (66.5x14.1) Dimensions,


320x370 (12.6x14.6) Antenna 38 (83.8)

Weight Pedestal

kg (lb) 26 (57.3)

Radome Material and Color Fiberglass, White Azimuth Adjustment per Antenna deg ± 20 Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 6 x 7/16 DIN-Female, inside of chassis Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2120x405x405 (83.5x15.9x15.9) Shipping Weight kg (lb) 45 (99.2)

Antenna Pattern



50


M16x80

310


Bottom Flange

-20 0 +20

With RCU

Top Flange

RCU (optional)

8- 18

485485



3-in-1 Dual-band Cluster Antenna MJS-065R15BV17KV XXPol, 806-960/1710-2170MHz, 65°, 15.0/17.0dBi


51

Vertical pattern

Horizontal pattern

945MHz @ 0o 1710MHz @ 0o 2170MHz @ 0o


Electrical


870- 960

1710- 1880

1850- 1990

1920- 2170

Polarization ± 45 Gain dBi 14.5 15.0 17.0 Horizontal Beamwidth deg 65 Vertical Beamwidth deg 12 7 Electrical Downtilt Range deg 0-14 0-7 First Upper Sidelobe Suppression dB > 15 > 18 Front-To-Back Ratio dB > 25 > 30 VSWR ≤ 1.5:1 Isolation Between Ports / Bands dB > 28 / > 40 Cross-polar Discrimination @ 0o dB > 20 > 17 3rd Order Intermodulation @ 2x43dBm dBc < -150 Maximum Power Per Port W 250 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Antenna 1991x474 (78.4x18.7) Dimensions,


320x485 (12.6x19.1) Antenna 45 (99.2)

Weight Pedestal

kg (lb) 30 (66.1)

Radome Material and Color Fiberglass, White Azimuth Adjustment per Antenna deg ± 10 Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 6 x 7/16 DIN-Female, inside of chassis Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 2015x490x490 (79.3x19.3x19.3) Shipping Weight kg (lb) 50 (110.2)

Antenna Pattern

3-in-1 Dual-band Cluster Antenna MJS-065R15BV17KV XXPol, 806-960/1710-2170MHz, 65°, 15.0/17.0dBi


52


RCU (optional)

With RCU

+10-10 0

Top Flange Bottom Flange


M16x80

485485

8- 18

310



Outdoor Directional Antenna for Microcell ODM-030V18B0 VPol, 824-960MHz, 30°, 18dBi


54

Vertical pattern

Horizontal pattern

824MHz 870MHz 960MHz


Electrical Frequency Range MHz 824-960 Polarization Vertical Gain dBi 18 Horizontal Beamwidth deg 30 Vertical Beamwidth deg 14 Front-To-Back Ratio dB > 33 VSWR ≤ 1.4:1 Maximum Power W 200 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD (with reflector) mm (in) 1251x796x474 (49.3x31.3x18.7) Weight, without Mounting Kit kg (lb) 20 (44.1) Weight, with Mounting Kit kg (lb) 25 (55.1) Radome Material and Color PVC, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Radiating Element Material PCB Connector Type and Location N-Female, Bottom Operational Temperature oC -30 to +55 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3)

Antenna 1465x320x275 (57.7x12.6x10.8) Shipping Dimensions Reflector

mm (in) 1215x570x115 (47.8x22.4x4.5)

Antenna 27 (59.5) Shipping Weight

Reflector kg (lb)

8 (17.6)

Antenna Pattern

Outdoor Directional Antenna for Microcell ODM-075V11N0 VPol, 806-960/1710-2500MHz, 75°, 11.0dBi


55

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2300 2400-2500 Polarization Vertical Gain dBi 9.7 11.0 11.0 Horizontal Beamwidth deg 75 60 55 Vertical Beamwidth deg 58 48 48 Front-To-Back Ratio dB > 22 VSWR ≤ 1.4:1 Maximum Power W 100 Impedance Ω 50 Lightning Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 480x282x54 (18.9x11.1x2.1) Weight, without Mounting Kit kg (lb) 1.5 (3.3) Weight, with Mounting Kit kg (lb) 1.7 (3.7) Radome Material and Color PVC, Light Grey, RAL7035 Mounting Kit Wall or pole mount included Radiating Element Material Brass Connector Type and Location N-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 560x393x133 (22.0x15.5x5.2) Shipping Weight kg (lb) 2.0 (4.4)

Antenna Pattern

Outdoor Directional Antenna for Microcell ODM-030V16K0 VPol, 1710-2170MHz, 30°, 15.5dBi


56

Vertical pattern

Horizontal pattern

1710MHz 1990MHz 2170MHz


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization Vertical Gain dBi 14.6 15.5 15.1 Horizontal Beamwidth deg 32 Vertical Beamwidth deg 30 Front-To-Back Ratio dB > 26 (typ. 30) VSWR ≤ 1.4:1 ≤ 1.5:1 Maximum Power W 100 Impedance Ω 50

Mechanical Dimensions, HxWxD mm (in) 280x280x60 (11.0x11.0x2.4) Weight, without Mounting Kit kg (lb) 1.5 (3.3) Weight, with Mounting Kit kg (lb) 1.7 (3.7) Radome Material and Color ABS, White Mounting Kit Pipe mount included Radiating Element Material Brass Connector Type and Location TNC, Rear Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 290x280x120 (11.4x11.0x4.7) Shipping Weight kg (lb) 2.1 (4.6)

Antenna Pattern

Outdoor Directional Antenna for Panel ODP-030V20K0 VPol, 1710-2170MHz, 30°, 20.0dBi


57

Vertical pattern

Horizontal pattern

1710MHz 1990MHz 2170MHz


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization Vertical Gain dBi 19.5 20.0 Horizontal Beamwidth deg 33 32 Vertical Beamwidth deg 7.5 7.0 First Upper Sidelobe Suppression dB > 18 Null Fill dB < 18 Front-To-Back Ratio dB > 35 (typ. 40) VSWR ≤ 1.4:1 ≤ 1.5:1 3rd Order Intermodulation @ 2x43 dBm dBc < -150 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1200x320x110 (47.2x12.6x4.3) Weight, without Mounting Kit kg (lb) 8 (17.6) Weight, with Mounting Kit kg (lb) 13 (28.7) Radome Material and Color Fiberglass, Light Grey, RAL7035 Mounting Kit SJA-B-12R(16) Reflector Material Aluminum Radiating Element Material Zinc Composite Connector Type and Location 7/16 DIN-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1460x365x160 (57.5x14.3x6.3) Shipping Weight kg (lb) 15 (33.1)

Antenna Pattern

Outdoor Yagi Antenna OYI-040V11B0 VPol, 824-960MHz, 40°, 11dBi


58

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 824-960 Polarization Vertical Gain dBi 11 Horizontal Beamwidth deg 40 Vertical Beamwidth deg 37 Front-To-Back Ratio dB > 15 VSWR ≤ 1.5:1 Maximum Power W 200 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 1100x198x105 (43.3x7.8x4.1) Weight, without Mounting Kit kg (lb) 2.5 (5.5) Weight, with Mounting Kit kg (lb) 2.7 (6.0) Mounting Kit Pole Mount included Radiating Element Material Aluminum Boom Material Aluminum Connector Type N-Female Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Survival Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 1110x200x110 (43.3x15.7x4.3) Shipping Weight kg (lb) 2.8 (6.2)

Antenna Pattern

Outdoor Yagi Antenna OYI-040V12K0 VPol, 1710-2170MHz, 40°, 12.5dBi


59

Vertical pattern

Horizontal pattern

1710MHz 1920MHz 2170MHz


Electrical Frequency Range MHz 1710-1880 1850-1990 1920-2170 Polarization Vertical Gain dBi 11.5 12.0 12.5 Horizontal Beamwidth deg 40 36 Vertical Beamwidth deg 38 32 Front-To-Back Ratio dB > 15 > 20 VSWR ≤ 1.5:1 ≤ 1.5:1 (typ.) Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 720x102x38 (28.3x4.0x1.5) Weight, without Mounting Kit kg (lb) 1.0 (2.2) Weight, with Mounting Kit kg (lb) 1.3 (2.8) Mounting Kit Pole Mount included Radiating Element Material Brass Boom Material Aluminum Connector Type and Location N-Female, Bottom Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Survival Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 790x110x100 (31.1x4.3x3.9) Shipping Weight kg (lb) 1.4 (3.1)

Antenna Pattern

Outdoor Yagi Antenna OYI-040V12F0 VPol, 1920-2170MHz, 40°, 11.5dBi


60

Vertical pattern

Horizontal pattern

1920MHz 2045MHz 2170MHz


Electrical Frequency Range MHz 1920-2170 Polarization Vertical Gain dBi 11.5 Horizontal Beamwidth deg 40 Vertical Beamwidth deg 35 Front-To-Back Ratio dB > 15 VSWR ≤ 1.4:1 Maximum Power Input W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimensions, HxWxD mm (in) 450x65x110 (17.7x2.6x4.3) Weight, without Mounting Kit kg (lb) 1.0 (2.2) Weight, with Mounting Kit kg (lb) 1.3 (2.8) Mounting Kit Pole Mount included Radiating Element Material Aluminum Boom Material Aluminum Connector Type N-Female Operational Temperature oC -55 to +70 Operational Humidity % ≤ 95 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimensions, HxWxD mm (in) 490x170x105 (19.3x6.7x4.1) Shipping Weight kg (lb) 1.4 (3.1)

Antenna Pattern

Outdoor Parabolic Antenna ORA-018V18NA VPol, 824-896, 18°, 18dBi


61

Vertical pattern

Horizontal pattern

870MHz


Electrical Frequency Range MHz 824-896 Polarization Vertical / Horizontal Gain dBi > 18 Half-Power Beamwidth deg > 18 Sidelobe Suppression dB > 18 Front-To-Back Ratio dB ≥ 25 VSWR ≤ 1.5:1 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimension, Dia mm (in) 1200 (47.2) Weight, without Mounting Kit kg (lb) 12 (26.7) Weight, with Mounting Kit kg (lb) 16 (35.6) Reflector Material Aluminum Alloy Azimuth Adjustable Range deg ± 90 Elevation Adjustable Range deg ± 12 Connector Type N-Female Operational Temperature oC -40 to +55 Operational Wind Speed km/h (mph) 210 (130.5) Shipping Dimensions, HxWxD mm (in) 1290x380x1290 (50.7x15.7x50.7) Shipping Weight kg (lb) 20 (44.4)

Antenna Pattern

Outdoor Parabolic Antenna ORA-018V18NG VPol, 880-960, 18°, 18dBi


62

Vertical pattern

Horizontal pattern

900MHz


Electrical Frequency Range MHz 880-960 Polarization Vertical / Horizontal Gain dBi > 18 Half-Power Beamwidth deg > 18 Sidelobe Suppression dB > 18 Front-To-Back Ratio dB ≤ 25 VSWR ≤ 1.4:1 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimension, Dia mm (in) 1200 (47.2) Weight, without Mounting Kit kg (lb) 12 (26.7) Weight, with Mounting Kit kg (lb) 16 (35.6) Mounting Kit Pole Mount included Reflector Material Aluminum Alloy Azimuth Adjustable Range deg ± 90 Elevation Adjustable Range deg ± 15 Connector Type N-Female Operational Temperature oC -40 to +70 Operational Wind Speed km/h (mph) 210 (130.5) Shipping Dimensions, HxWxD mm (in) 1290x380x1290 (50.7x15.7x50.7) Shipping Weight kg (lb) 20 (44.4)

Antenna Pattern

Outdoor Parabolic Antenna ORA-011V23NC VPol, 1710-1880, 11°, 22.5dBi


63

Vertical pattern

Horizontal pattern

1820MHz


Electrical Frequency Range MHz 1710-1880 Polarization Vertical / Horizontal Gain dBi > 22.5 Half-Power Beamwidth deg 10.5 Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 35 VSWR ≤ 1.4:1 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground


Antenna Pattern

Outdoor Parabolic Antenna ORA-008V25NP VPol, 1850-1990, 8°, 24.5dBi


64

Vertical pattern

Horizontal pattern

1920MHz


Electrical Frequency Range MHz 1850-1990 Polarization Vertical / Horizontal Gain dBi > 24.5 Half-Power Beamwidth deg 8 Upper Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 35 VSWR ≤ 1.4:1 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground

Mechanical Dimension, Dia mm (in) 1200 (47.2) Weight, without Mounting Kit kg (lb) 10 (22.0) Weight, with Mounting Kit kg (lb) 14 (30.8) Mounting Kit Pole Mount included Reflector Material Aluminum Alloy Azimuth Adjustable Range deg ± 90 Elevation Adjustable Range deg ± 15 Connector Type N-Female Operational Temperature oC -40 to +70 Operational Wind Speed km/h (mph) 200 (124.3) Shipping Dimension, HxWxD mm (in) 1290x380x1290 (50.7x15.7x50.7) Shipping Weight kg (lb) 16 (35.2)

Antenna Pattern

Outdoor Parabolic Antenna ORA-012V23NF VPol, 1920-2170, 12°, 23dBi


65

Vertical pattern

Horizontal pattern

2045MHz


Electrical Frequency Range MHz 1920-2170 Polarization Vertical / Horizontal Gain dBi > 23 Half-Power Beamwidth deg 12 Sidelobe Suppression dB > 18 Front-To-Back Ratio dB > 25 VSWR ≤ 1.4:1 Maximum Power W 100 Impedance Ω 50 Lighting Protection Direct Ground


Antenna Pattern

Indoor Omni-directional Antenna ICC-360V02K0 VPol, 1710-2170MHz, 360°, 3dBi


67

Vertical pattern

Horizontal pattern

1710MHz 1950MHz 2170MHz


Electrical Frequency Range MHz 1710-2170 Polarization Linear Gain dBi 3 Horizontal Beamwidth deg 360 VSWR ≤ 1.4:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, LxWxH mm (in) 85x48x12 (3.3x1.9x0.5) Weight kg (lb) 0.1 (0.2) Color Light Grey, RAL7035 Mount Ceiling Radiating Element Material Printed Circuit Connector Type SMA-F Environmental Class Indoor Shipping Dimensions, LxWxD mm (in) 230x130x40 (9.1x5.1x1.6) Shipping Weight kg (lb) 0.2 (0.4)

Antenna Pattern

Indoor Omni-directional Antenna ICC-360V02L0 VPol, 2400-2500MHz, 360°, 2.1dBi


68

Vertical pattern

Horizontal pattern

2400MHz 2450MHz 2500MHz


Electrical Frequency Range MHz 2400-2500 Polarization Linear Gain dBi 2.1 Horizontal Beamwidth deg 360 VSWR ≤ 1.5:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, LxWxH mm (in) 48x25x12 (1.9x1.0x0.5) Weight kg (lb) 0.1 (0.2) Color Light Grey, RAL7035 Mount Ceiling Radiating Element Material Printed Circuit Connector Type SMA-F Environmental Class Indoor Shipping Dimensions, LxWxD mm (in) 230x130x40 (9.1x5.1x1.6) Shipping Weight kg (lb) 0.2 (0.4)

Antenna Pattern

Indoor Omni-directional Antenna ICC-360V03W0 VPol, 806-960/1710-2170MHz, 360°, 3dBi


69

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2170 Polarization Linear Gain dBi 2.1 3.0 Horizontal Beamwidth deg 360 VSWR ≤ 1.5:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, LxWxH mm (in) 100x100x1.65 (3.9x3.9x0.1) Weight kg (lb) 0.1 (0.2) Color Light Grey, RAL7035 Mount Ceiling Radiating Element Material Printed Circuit Connector Type SMA-F Environmental Class Indoor Shipping Dimensions, LxWxD mm (in) 230x130x40 (9.1x5.1x1.6) Shipping Weight kg (lb) 0.2 (0.4)

Antenna Pattern

Indoor Directional Antenna Ceiling Mount IXD-120V06K0 VPol, 1710-2500MHz, 120°, 6dBi


70

Vertical pattern

Horizontal pattern

1770MHz 2170MHz 2400MHz


Electrical Frequency Range MHz 1710-2500 Polarization Vertical Gain dBi 6 Horizontal Beamwidth deg 120 Vertical Beamwidth deg 100 VSWR ≤ 1.4:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 130x65 (5.1x2.6) Weight without Mounting Kit kg(lb) 0.5 (1.1) Radome Material and Color ABS, Light Grey, RAL7035 Mount Ceiling Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 140x140x140 (5.5x5.5x5.5) Shipping Weight kg (lb) 0.5 (1.1)

Antenna Pattern

Indoor Directional Antenna Ceiling Mount IXD-120V06N0-3 VPol, 806-960/1710-2500MHz, 120°, 6dBi


71

Vertical pattern

Horizontal pattern

1880MHz 2170MHz 2500MHz


Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 6 Horizontal Beamwidth deg 120 Vertical Beamwidth deg 100-120 VSWR ≤ 1.5:1 Power Handling W 100 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 170x70 (6.7x2.8) Weight kg(lb) 0.5 (1.1) Radome Material and Color PS, Light Grey, RAL7035 Mount Ceiling Reflector Material Aluminum Radiating Element Material Aluminum Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 176x176x152 (6.9x6.9x6.0) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern

Indoor Omni-directional Antenna Ceiling Mount IXD-360V03K0 VPol, 1710-2500MHz, 360°, 2.1dBi


72

Vertical pattern

Horizontal pattern

1710MHz 1920MHz 2170MHz


Electrical Frequency Range MHz 1710-2500 Polarization Vertical Gain dBi 2.1 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 30-60 VSWR ≤ 1.4:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 130x65 (5.1x2.6) Weight kg (lb) 0.5 (1.1) Radome Material and Color ABS, Light Grey, RAL7035 Mount Ceiling Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 140x140x140 (5.5x5.5x5.5) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern

Indoor Omni-directional Antenna Ceiling Mount IXD-360V03N0-2 VPol, 806-960/1710-2500MHz, 360°, 4dBi


73

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 2.0 4.0 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 180 VSWR ≤ 1.5:1 ≤ 1.45:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 204x84 (8.0x3.3) Weight kg (lb) 0.5 (1.1) Radome Material and Color ABS, Light Grey, RAL7035 Mount Ceiling Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 210x210x130 (8.3x8.3x5.1) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern

Indoor Omni-directional Antenna Ceiling Mount IXD-360V03N0-3 IXD-360V03N0-31 VPol, 806-960/1710-2500MHz, 360°, 4.7dBi


74

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 2.0 4.7 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 100-120 30-65 VSWR ≤ 1.4:1 Power Handling W 100 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 170x70 (6.7x2.8) Weight kg (lb) 0.5 (1.1) Radome Material PS Radome Color IXD-360V03N0-3 Semi-transparent, Light Grey, RAL7035 Radome Color IXD-360V03N0-31 White Mount Ceiling Reflector Material Aluminum Radiating Element Material Aluminum Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 155x155x155 (6.1x6.1x6.1) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern



75


Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 2.1 4.7 Horizontal Beamwidth deg 360 Vertical Beamwidth deg 180 VSWR ≤ 1.50:1 ≤ 1.45:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxDia mm (in) 180x70 (7.1x2.8) Weight kg (lb) 0.5 (1.1) Radome Material and Color PS, Semi-transparent Mount IXD-360V03N0-4 Plastic nut fix, back feed Mount IXD-360V03N0-41 Separate mounting plate, side feed Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 185x185x185 (7.3x7.3x7.3) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern

Vertical Pattern

Horizontal Pattern


Indoor Omni-directional Antenna Ceiling Mount IXD-360V03N0-5 IXD-360V03N0-51 VPol, 806-960/1710-2500MHz, 360°, 4dBi


76

Vertical pattern

Horizontal pattern




Mechanical Dimensions, HxDia mm (in) 100x170 (3.9x6.7) Weight kg(lb) 0.4 (0.9) Radome Material and Color PS, White Mount Ceiling, via hole (standard) Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 145x145x140 (5.7x5.7x5.5) Shipping Weight kg (lb) 0.4 (0.9)

Antenna Pattern



77

Vertical pattern

Horizontal pattern




Mechanical Dimensions, HxDia mm (in) 95x205 (3.7x8.1) Weight kg (lb) 0.5 (1.1) Radome Material and Color PS, White Mount IXD-360V03N0-6 Ceiling, via 3 hole and plug, side feed Mount IXD-360V03N0-61 Ceiling, via 3 hole and plug, back feed Reflector Material Aluminum Radiating Element Material Brass Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 210x210x130 (8.3x8.3x5.1) Shipping Weight kg (lb) 0.6 (1.3)

Antenna Pattern

Indoor Directional Antenna Wall Mount IWH-075V09N0 VPol, 806-960/1710-2500MHz, 75°, 8dBi


78

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 4.5 8.0 Horizontal Beamwidth deg 75 60 Vertical Beamwidth deg 75 50 VSWR ≤ 1.5:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxWxD mm (in) 200x210x85 (7.9x8.3x3.3) Weight kg (lb) 0.5 (1.1) Radome Material and Color PVC, Light Grey, RAL7035 Mount Wall Reflector Material Aluminum Radiating Element Material Printed Circuit Board Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 330x360x100 (13.0x14.2x3.9) Shipping Weight kg (lb) 0.8 (1.8)

Antenna Pattern



79

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 7 8 Horizontal Beamwidth deg 90 75 Vertical Beamwidth deg 65 VSWR ≤ 1.45:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxWxD mm (in) 210x180x44 (8.3x7.1x1.7) Weight kg (lb) 0.5 (1.1) Radome Material and Color ABS, Light Grey, RAL7035 Mount Wall Reflector Material Aluminum Radiating Element Material Aluminum Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD 290x190x55 (11.4x7.5x2.2) Shipping Weight 0.6 (1.3)

Antenna Pattern



80

Vertical pattern

Horizontal pattern



Electrical Frequency Range MHz 806-960 1710-2500 Polarization Vertical Gain dBi 4.0 6.0 Horizontal Beamwidth deg 95 50 Vertical Beamwidth deg 110 65 VSWR ≤ 1.5:1 Power Handling W ≤ 50 Impedance Ω 50

Mechanical Dimensions, HxWxD mm (in) 225x155x45 (8.9x6.1x1.8) Weight kg (lb) 1 (2.2) Radome Material and Color PVC, Light Grey, RAL7035 Mount Wall Reflector Material Aluminum Radiating Element Material Printed Circuit Board Connector Type N-Female Environmental Class Indoor Shipping Dimensions, HxWxD mm (in) 300x360x100 (11.8x14.2x3.9) Shipping Weight kg (lb) 1 (2.2)

Antenna Pattern

RCU-003[II-2] Remote Control Unit


87


Electrical Connectors to CCU 8 pin connector, Male, conform to AISG Layer 1

Connectors to RCU 8 pin connector, Female, conform to AISG Layer 1

Power Supply V +10~+30 DC

Power Consumption W < 1 (stand by); < 10 (operating)

Protocol to CCU/TMA HDLC hex-code command set, conform to AISG Layer 2

Adjustment Time sec 30 Adjustment Cycles > 50,000

Mechanical Dimensions, HxWxD mm (in) 141x52x47 (5.5x2.0x1.8)

Weight kg (lb) 0.46 (1.0)

Housing Material and Color Aluminum, Light Gray

Operating Temperature oC -40 to +60

Environment Class IP67

SSiiddee VViieewwss

Features • Fully compliant with AISG 2.0 • Connection to AISG Compatible CCU, TMAs and Smart Bias Tee • Industry standard Bus – RS485 • Compact and light weight • IP67 protection class

Top View of RCU Bottom View of RCU

CCU-001AG, CCU-003AG Central Control Unit


88


Electrical Connectors to RCU 1 x 8 pin connector, Female, conform to AISG Layer 1

Power Supply to RCU V 1 x +26 DC/ max 1.5A (in total), or 1 x +12 DC/ max 3.0A (in total)

Power Supply from BTS V --48 DC/max 1.35A (in total)

Total Output Power W 65

Interface to RCU/TMA RS-485 / Power Supply

Protocol to RCU/TMA HDLC hex-code command set, conform to AISG Layer 2 Pin Selection Support RS485 B/A Pin Location selection Power 24V/12V Software Selectable

Ethernet 10/100M adaptable Interface for Remote Control

RS-232, USB 2.0

Protocols to BTS TCP/IP, SNMP, FTP, Telnet Protection Built - in LPD Max. Length of Control Cable* m 300

Mechanical Dimensions, HxWxD mm (in) 44.4x220x185 (1.7x8.6x7.3)


Housing Material and Color Aluminum, Light Gray


Operating Humidity % < 95

Packing Size mm 100x300x270 (3.9x11.8x10.6)

Shipping Weight (Approx) kg 2.0 (4.4)

*Note: Line devices must operate at +24VDC

SSyysstteemm SSttrruuccttuurree

Note: Comba COMETS is a software tool that provides comprehensive features for OMC. For more information, please kindly refer to the COMETS datasheet.

Features • Fully compliant with AISG issue 1.1 & 2.0 • Designed specifically to interface with AISG compliant actuators • Controls up to 24 AISG line devices* • Reports alarms to multiple SNMP Managers • Web-based application • Built-in watch dog timer and USB 2.0 supported • Built-in LPD (Lightning Protection Device) and Wall/Rack-mountable • Self-diagnosable • Available in single or three AISG port version

COMETS

Portable PC

CCU-001AG, CCU-003AG Central Control Unit


89

MMoouunnttiinngg GGuuiiddee

Wall/Side Wall/Front Rack/Add Ear

AISG Control Cable 00-KX02(yy) (yy=cable length in meter)


90


Electrical Operating Voltage V 250

Operating Current @40°C A 5 (Conform to IEC60512-3)

Pulsating Voltage V 1200 (Conform to IEC60664-1)

Insulation Resistance Ω >3x109 (Conform to IEC60512-2 Test 3a)

Contact Resistance mΩ <5 (Conform to IEC60512-2 Test 2a)

Mechanical Cable Specification 2C x 0.32 + 3C x 0.75

Connector Type 2 x 8 pin circular connector, 1 Male + 1 Female

(Conform to IEC60130-9) Operating Temperature oC -40 to +85

Operating Humidity % ≤ 95

Environmental Class IP67 Note: Measurements taken at room temperature, unless otherwise stated.

Part Numbers 00-KX02(0.5) m (in) 0.5 (19.7)

00-KX02(01) m (in) 1 (39.4)

00-KX02(03) m (in) 3 (118.1)

00-KX02(05) m (in) 5 (196.9)

00-KX02(10) m (in) 10 (393.7)

00-KX02(20) m (in) 20 (787.4)

00-KX02(30) m (in) 30 (1,181.1)

00-KX02(40) m (in) 40 (1,574.8)

00-KX02(50) m (in) 50 (1,968.5)

00-KX02(60) m (in) 60 (2,362.2)

00-KX02(70) m (in) 70 (2,755.9)

00-KX02(80) m (in) 80 (3,149.6)

Connector Outline Drawing

Signal 1 +12VDC nominal 2 Not connected 3 RS485 B 4 Not connected 5 RS485 A 6 10V-30V DC 7 DC Return 8 Not connected

Female Male

Features and Product Description • A 5-core cable use for connection between AISG antenna line devices • 8-pin Circular connector type • Weather resistance • Supply in various length

From antenna to base station, Comba offers a complete suite of filters, combiners, power splitters and

couplers for Common Antenna System (CAS) and RF network optimization. Comba range of passive

components is designed using high performance filter to provide reliable and cost effective solutions for

both indoor and outdoor applications.

Key Features:

••Wideband design to enable feeder sharing between multi systems.

•Designed for co-siting purposes and can be fast and easily installed.

•High isolation minimizes interference.

•Good PIM performance.

•High power handling and low loss maximizes system performance.

•Outdoor combiner comes with optional DC bypass for used with Tower Mounted Amplifier or AISG line

devices and is available as a single unit or double unit.

In addition, Comba also produces interference rejection filters. These filters can be used at the transmission

or the receiver end for:

•Increasing isolation of transmitters.

•Reducing 3rd Order Interference (IM3) and side-band noise to prevent receiver blocking.

•Spurious emissions reduction.

91

RF Products

Wideband Diplexer CM-BK2-ODxx, CM-BK2D-ODxx (x= 1, 2, 3 or 4, Preconfigured DC-pass)


92


Electrical Pass Band Frequency Range MHz 806-960 1710-2170 Insertion Loss dB ≤ 0.2 ≤ 0.3

≥ 60 @806-960MHz Isolation between Bands dB

≥ 80 @1710-2170MHz Return Loss dB ≥ 21 Power Handling Continuous W ≤ 250 ≤ 250 Power Handling Continuous at Common Port W ≤ 500 Intermodulation Products dBc ≤ -155 @2x43dBm Impedance Ω 50

Mechanical Single unit 309x105x89 (12.2x4.1x3.5) Dimensions, LxWxH

(including mounting brackets) Double unit mm (in)

303x133x124 (11.9x5.2x4.9) Single unit 2.5 (5.5) Weight

(including mounting brackets) Double unit kg (lb)

4.0 (8.8) Colors Light Grey Housing Aluminum RF Connectors 7/16 DIN-Female Mounting Kit Pole (clamps included for Ф 35-125mm) or wall mounted

Environmental Characteristics

Operating Temperature Range oC -40 to +65 Operational Humidity % <95 Environment Class IP66 (Indoor or Outdoor) EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs MTBF hr > 1,000,000

Ordering Information and Block Diagram Single unit Model Number Double unit Model Number DC Bypass Optional

CM-BK2-OD1C CM-BK2D-OD1C No DC Path CM-BK2-OD2C CM-BK2D-OD2C DC Path in Low Frequency Band CM-BK2-OD3C CM-BK2D-OD3C DC Path in High Frequency Band CM-BK2-OD4C CM-BK2D-OD4C Full DC Path

Features and Product Description • Wide-band design to enable feeder sharing between systems in the

806-960MHz range and the 1710-2170MHz range • Fast and easy installation • High power handling and low loss – maximizes system performance • High isolation – minimizes interference • Build with optional DC bypass, to be used with Tower Mounted Amplifiers and

AISG devices • Available as a single unit or double unit

CM-BK2D-ODxC shown

Port 1806-960

Port 21710-2170

Port 3

DC

/AIS

G B

ypas

s

DC

/AIS

G B

ypas

s

Example: View of single unit CM-BK2-OD4C

Diplexer CM-DW2-ODxx, CM-DW2D-ODxx (x= 1, 2, 3 or 4, Preconfigured DC-pass)


93

Features and Product Description • Enables feeder sharing between DCS1800 and UMTS system • Compact design suitable for indoor and outdoor application • Fast and easy installation • High power handling and low loss – maximizes system performance • High isolation – minimizes interference • Build with optional DC bypass, to be used in applications with or without Tower

Mounted Amplifiers installed • Available as a single unit or double unit


Electrical Pass Band Frequency Range MHz 1710-1880 1920-2170 Insertion Loss dB ≤ 0.3 ≤ 0.3 Isolation between Bands dB ≥ 50 Return Loss dB ≥ 20 Power Handling Continuous W ≤ 250 ≤ 250 Power Handling Continuous at Common Port W ≤ 500 Intermodulation Products dBc ≤ -155 @2x43dBm Impedance Ω 50

Mechanical Single Unit mm (in) 332x146x86 (13.1x5.7x3.4) Dimensions, LxWxH

(including mounting brackets) Double Unit mm (in) 303x173x106 (11.9x6.8x4.2) Single Unit kg (lb) 3.5 (7.7) Weight

(including mounting brackets) Double Unit kg (lb) 6.0 (13.2) Colors Light Grey Housing Aluminum Connector Type 7/16 DIN-Female Mount Kit Pole (clamps included for Ф35-125mm Pole) or Wall mount

Environmental Characteristics Operating Temperature Range oC -40 to +65 Operational Humidity % <95 Environmental Class IP66 (Indoor or Outdoor) EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs MTBF hr > 1,000,000


CM-DW2-OD1C CM-DW2D-OD1C No DC Path CM-DW2-OD2C CM-DW2D-OD2C DC Path in Low Frequency Band CM-DW2-OD3C CM-DW2D-OD3C DC Path in High Frequency Band CM-DW2-OD4C CM-DW2D-OD4C Full DC Path

CM-DW2D-ODxC shown

Port 11710-1880

Port 21920-2170

Port 3

DC

/AIS

G B

ypas

s

DC

/AIS

G B

ypas

s

Example: View of single unit CM-DW2-OD4C

Triple-band Combiner CM-BDW3-ODxx, CM-BDW3D-ODxx (x= 1, 2… or 6, Preconfigured DC-pass)


94


Electrical Pass Band Frequency Range MHz 806-960 1710-1880 1920-2170 Insertion Loss dB ≤ 0.2 ≤ 0.3 ≤ 0.3

≥ 50 (806-960/1710-1880MHz) ≥ 50 (806-960/1920-2170MHz) Isolation between Bands dB ≥ 50 (1710-1880/1920-2170MHz)

Return Loss dB ≥ 20 Power Handling Continuous W ≤ 250 ≤ 250 ≤ 250 Power Handling Continuous at Common Port W ≤ 500 Intermodulation Products dBc ≤ -155 @2x43dBm Impedance Ω 50

Mechanical Single Unit mm (in) 326x185x87 (12.8x7.3x3.4) Dimensions, LxWxH

(including mounting brackets) Double Unit mm (in) 316x202x112 (12.4x8.0x4.4) Single Unit kg (lb) 4 (8.8) Weight

(including mounting brackets) Double Unit kg (lb) 7 (15.4) Colors Light grey Housing Aluminum RF Connectors 7/16 DIN-Female Mount Kit Pole (clamps included for Ф35-125mm Pole) or Wall mount

Environmental Characteristics Operating Temperature Range oC -40 to +65 Operational Humidity % <95 Environment Class IP66 (Indoor or Outdoor) EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs MTBF hr > 1,000,000


CM-BDW3-OD1C CM-BDW3D-OD1C No DC Path CM-BDW3-OD2C CM-BDW3D-OD2C DC Path in Low Frequency Band CM-BDW3-OD3C CM-BDW3D-OD3C DC Path in Mid Frequency Band CM-BDW3-OD4C CM-BDW3D-OD4C DC Path in High Frequency Band CM-BDW3-OD5C CM-BDW3D-OD5C DC Path in Mid and High Frequency Band CM-BDW3-OD6C CM-BDW3D-OD6C Full DC Path

Features and Product Description • Designed for feeder sharing and co-location purpose • High power handling and low loss – maximizes system performance • High isolation – minimizes interference • Build with optional DC (AISG signals) bypass • Available as a single unit or double unit

CM-BDW3D-ODxC shown

Example: View of Single unit CM-BDW3-OD6C

DC

Byp

ass

DC

Byp

ass

DC

Byp

ass

Port 31920-2170

Port 1806-960

Port 21710-1880

Port 4

Directional Coupler DC-Rxx-ON200M, DC-Rxx-OD200M


95


Electrical 5dB 6dB 7dB 8dB 10dB 13dB 15dB 20dB

Frequency Range MHz 698-2700 Input Power W ≤ 200 Coupling Value dB 5±0.8 6±0.8 7±0.8 8±0.8 10±1 13±1 15±1 20±1 Main Line Loss dB ≤ 2.3 ≤ 1.7 ≤ 1.5 ≤ 1.2 ≤ 0.8 ≤ 0.5 ≤ 0.4 ≤ 0.3 Directivity dB > 20 Input port VSWR < 1.25 PIM dBc ≤ -140 @2x43dBm Impedance Ω 50

Mechanical Type N-F 141x55x23 (5.6x2.2x0.9) Dimension,

LxWxH 7/16 DIN-F mm (in)

156x66x36 (6.1x2.6x1.4) Type N-F 0.30 (0.7)

Weight 7/16 DIN-F

kg (lb) 0.75 (1.7)

Material Aluminum Temperature Range oC -25 to +75 Humidity % < 95 Environmental Class Indoor/Outdoor IP65

Outline Drawing

5.5

36

112

44

15636

66

37

23

55

141105

115

4.5

15

Features and Product Description • Designed for operating in wide frequency band from 698-2700MHz. • 200W power handling capability. • Low loss and good PIM performance. • Available in 7/16 DIN or N-type connector. • Suitable for both indoor and outdoor applications.

Directional Coupler DC-Rxx-ON200M, DC-Rxx-OD200M


96


Electrical 30dB 40dB

Frequency Range MHz 698-2700 Input Power W ≤ 200 Coupling Value dB 30±1.2 40±1.5 Main Line Loss dB ≤ 0.2 Isolation dB > 33 > 43 Input port VSWR < 1.25 PIM dBc ≤-140 @2x43dBm Impedance Ω 50

Mechanical 7/16 DIN-F 156x70x36 (6.1x2.8x1.4)

Dimension, LxWxH Type N-F

mm (in) 141x59x23 (5.6x2.3x0.9)

7/16 DIN-F 0.85 (1.9) Weight

Type N-F kg (lb)

0.40 (0.9) Material Aluminum Operational Temperature oC -25 to +65 Operational Humidity % < 95 Environmental Class Indoor/Outdoor IP65

Ordering Information

15

40

112

48

15636

70

41

23

59

141

105

115

4.5

5.5

Features and Product Description

• Designed for operating in wide frequency band from 698-2700MHz. • 200W power handling capability. • Low loss and good PIM performance. • Available in 7/16 DIN or N-type connector. • Suitable for both indoor and outdoor applications.

Coupler CO-Rxx-ON200C


97


Electrical 6dB 10dB 15dB 20dB 30dB 40dB

Frequency Range MHz 698-2700 Input Power W ≤ 200 Coupling Value dB 6±1.2 10±1.2 15±1.2 20±1.5 30±1.5 40±1.5 Main Line Loss dB ≤ 1.7 ≤ 0.8 ≤ 0.4 ≤ 0.2 ≤ 0.2 ≤ 0.2 Input Port VSWR < 1.4 < 1.2 Insertion Loss dB ≤ 0.1 PIM dBc ≤ -140 @2×43dBm Impedance Ω 50

Mechanical Dimension, LxWxH mm (in) 209x63x25 (8.2x2.5x1.0) 93x63x25 (3.7x2.5x1.0) Weight kg (lb) 0.4 (0.9) 0.2 (0.4) Material Aluminum Operational Temperature oC -35 to +65 Operational Humidity % < 95 Environmental Class Indoor and Outdoor (IP65)

Outline Drawing

20925

6325

6,10,15dB

20,30,40dB

93 25

25

63

3.2

Features and Product Description • Designed to operate in wide frequency band from 698-2700MHz. • 200W power handling capability. • Low insertion loss and good PIM performance. • Suitable for both indoor and outdoor applications.

Hybrid Coupler HC-R-ON150L, HC-R-OD150L


98

Technical Specification

Electrical Frequency Range MHz 698-2700 Input Avg. Power, max at each port W 150 Insertion Loss dB ≤ 0.2 Coupling Value dB 3.1 Coupling Tolerance dB ±0.5 Isolation between Bands dB ≥ 23* VSWR ≤ 1.2* Impedance Ω 50

Mechanical 7/16 DIN-F 133x90x38 (5.2x3.5x1.5)

Dimension, LxWxH Type N-F

mm (in) 133x76x25 (5.2x3.0x1.0)

7/16 DIN-F 1.0 (2.2) Weight

Type N-F kg (lb)

0.5 (1.1) Material Aluminum Operational Temperature oC -25 to +65 Operational Humidity % < 95 Environmental Class Indoor/Outdoor (IP65)

* Valid if all ports are terminated with 50Ω load

Outline Drawing

47 90

3883

5

133

125

4.5

25

40 76125

13383

Features and Product Description • Designed for operating in wide frequency band 698-2700MHz. • Compact and cost effective solution for combining two bands. • Low insertion loss and good PIM performance. • Integrating two operators’ services into an existing in-building antenna distribution

system.

Power Divider, 50W PS-R2-ON50M, PS-R3-ON50M, PS-R4-ON50M


99


Electrical 2-way 3-way 4-way

Frequency Range MHz 698-2700 Input Power W ≤ 50 Reflected Power, max W ≤ 1.5 ≤ 2 ≤ 3 Splitting Loss dB 3.0 4.8 6.0 Insertion Loss dB ≤ 0.4 ≤ 0.7 ≤ 0.6 VSWR < 1.25 < 1.30 Isolation between Ports dB > 20 > 18 Impedance Ω 50

Mechanical

Dimension, LxWxH mm (in) 107x59x22

(4.2x2.3x0.9) 135x91x22

(5.3x3.6x0.9) 129x121x22

(5.1x4.8x0.9) Weight kg (lb) 0.2 (0.4) 0.5 (1.1) 0.6 (1.3) Material Aluminum Connector Type N-Female Operational Temperature oC -25 to +65 Operational Humidity % < 95 Environmental Class Indoor and Outdoor (IP65)

Outline Drawing

93129

2828

28

4.5

83

131

99135

3030

89

101

71

107

30

61

69 7959

22

111

91

22

141

121

22

Features and Product Description • Designed for operating in wide frequency band from 698-2700MHz. • 50W power handling capability. • Low loss, flat response and even output. • Suitable for both indoor and outdoor applications.

Power Divider PS-R2-ON300C,PS-R3-ON300C,PS-R4-ON300C, PS-R2-OD700C,PS-R3-OD700C,PS-R4-OD700C


100


Electrical 2-way 3-way 4-way

Frequency Range MHz 698-2700 7/16 DIN-F ≤ 700

Input Power Type N-F

W ≤ 300

Splitting Loss dB 3.0 4.8 6.0 Insertion loss dB ≤ 0.3 Input Port VSWR < 1.20 < 1.25 < 1.30 PIM dBc ≤ -140 @2x43dBm Impedance Ω 50

Mechanical

7/16 DIN-F 230x82x38

(9.1x3.2x1.5) 252x82x38

(9.9x3.2x1.5) 255x82x60

(10.0x3.2x2.4) Dimension, LxWxH

Type N-F mm (in)

211x61x25 (8.3x2.4x1.0)

227x61x25 (8.9x2.4x1.0)

227x61x43 (8.9x2.4x1.7)

7/16 DIN-F 1.05 (2.3) 1.2 (2.7) 1.32 (2.9) Weight

Type N-F kg (lb)

0.38 (0.8) 0.42 (0.9) 0.46 (1.0) Material Aluminum Operational Temperature oC -35 to +65 Operational Humidity % < 95 Environmental Class Indoor/Outdoor IP65

Outline Drawing

197

22743

6125

197227

25

6125

25196

6125

211

209

25560

38

8238

207

25238

8238

38204

8238

230

25

Features and Product Description • Designed for operating in wide frequency band from 698-2700MHz. • High power handling capability. • Good PIM performance. • Low loss, flat response and even output. • Suitable for both indoor and outdoor applications.

Comba’s Tower Mounted Amplifier (TMA) is a cost-effective solution for enhancing wireless networks covv

erage. Comba’s comprehensive TMA solutions for 800/900/1800/2100MHz wireless networks provide

uplink amplification, supporting both uplink and downlink channels.

With high performance, low-noise amplifiers built-in, TMA solutions can create a balanced

Downlink (DL) and Uplink (UL) by improving base station receiver sensitivity.

In 3G networks, Comba’s TMA can be used to reduce Uplink (UL) noise rise and hence increase Uplink

(UL) capacity. The improved receiver sensitivity means a reduction in handset (Ue) transmit power and

longer handset battery life.

Applications

•TMAs increase successful call rates, reduce dropped calls, maximize data transmission rate, improve call

quality and therefore extend handset battery life. Quality improvements will lead to increased traffic

volume and user satisfaction, hence increasing network revenue. volume and user satisfaction, hence increasing network revenue.

•TMAs are especially suitable for use in new network roll-outs to minimize new base station sites by

optimizing existing base stations to improve uplink (UL) signal quality, Call setup success rates, and

Erlang minutes per drop and reduce call dropped calls.

Key features

•Easy installation enabling rapid launch of network

••Cost-effective solution to decrease network infrastructure expense

•High performance with RF bypass function for high reliability

•Built-in lightning protection

•Compact design and lightweight.

101

Tower Mounted Amplifier System

Full band CDMA850 Tower Mounted Amplifier TA-C12FS03


102

The TA-C12FS03 is a single CDMA850 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-C12FS03 will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The TA-C12FS03 comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-C12FS03 and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to six units of TA-C12FS03.

Features • Balanced LNA design and power failure bypass for high reliability • Alarm management: DC current load simulation • Light weight and compact design • Salt spray resistance, IP66 • Built-in lightning protection and vented enclosure design • EMP protection with excellent MTBF

Product Description

Typical Application Block Diagram

Full band CDMA850 Tower Mounted Amplifier TA-C12FS03


103


Electrical - Uplink Frequency Range MHz 824-849

Bandwidth MHz 25

System Gain dB 12 ± 1

Noise Figure dB ≤ 1.8 (typ. 1.4) Pass Band Ripple dB ≤ 1

Insertion Loss in By-pass Mode dB ≤ 1.8

Output 3rd Order Intercept Point (OIP3) dBm ≥ 22

Normal Operation ≥ 18 Return Loss

Bypass Mode dB

≥ 14

Group Delay ns ≤ 200

Operation ≥ 230 (Minor Alarm) Alarm Management

By-pass Mode mA

≥ 330 (Major Alarm)

Electrical - Downlink Frequency Range MHz 869-894

Bandwidth MHz 25

Insertion Loss dB ≤ 0.6

Return loss dB ≥ 18

Absolute Maximum RF Input Power dBm 52 (CW); 59 (Peak)

Inter-modulation Products in RX Band dBm ≤ -110 (2 TX carriers at +43dBm)


Power, Mechanical & Environmental Operating Voltage V +10 to +15

Operating Current per Port mA 130 @+12V

Power Consume W ≤ 1.6 Dimensions, LxWxH (excluding connectors & mounting brackets)

mm(in) 223x194x60 (8.8x7.6x2.4)

Weight kg(lb) 4 (8.8) Wall mounting: with 4 screws

Mounting Mast mounting: with clamp set

Connector Type 7/16 DIN-Female Enclosure Color Light Grey

Enclosure Material Aluminum

Operating Temperature °C -40 to +65


EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs Environmental Class IP66

MTBF hr > 1,000,000

Note: Measurements taken at room temperature, unless otherwise stated.

Twin DCS1800 Tower Mounted Amplifier TA-D12FD


104

The TA-D12FD is a full band DCS1800 twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-D12FD will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-D12FD and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to three units of TA-D12FD.

Features • Two TMA units in one enclosure • Balanced LNA design and power failure bypass for high reliability • Alarm management: DC current load simulation • Light weight and compact design • Salt spray resistance • IP66 with Gore Tex ventilation membrane • Built-in lightning protection and vented enclosure design • EMP protection with excellent MTBF

Product Description


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port

To Antenna To Antenna

ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNALNALNA LNALNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS

ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


Twin DCS1800 Tower Mounted Amplifier TA-D12FD


105



Bandwidth MHz 75


Noise Figure dB ≤ 1.9 (typ. 1.5)

Pass Band Ripple dB ≤ 1.2




By-pass Mode dB

≥ 14



By-pass Mode mA



Bandwidth MHz 75


Return Loss dB ≥ 18

Absolute Maximum RF Input Power dBm 52 (CW);59 (Peak) Inter-modulation Products in RX Band dBm ≤ -110 (2 TX carriers at +43dBm)

Group Delay ns ≤50



Power Consume per Port W ≤ 1.5 Dimensions, LxWxH (excluding connectors & mounting brackets)

mm(in) 250x224x59 (9.8x8.8x2.3)

Weight kg(lb) ≤ 6 (13.2)

Wall mounting: with 4 screws Mounting

Mast mounting: with clamp set

Connector Type 7/16 DIN-Female

Enclosure Color Light Grey




EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs

Environmental Class IP66

MTBF (per Unit) hr > 500,000


Full Band Twin GSM1800 Tower Mounted Amplifier TA-D12FDA


106

From CCU or Node B

RCU RCU

BT-M1S

7/8 RF Cable

7/8 RF Cable

7/8 RF Cable

Multi-cable

The top of the tower

The root of the tower

TA-D12FDA

Node B

RET

The TA-D12FDA is a full band GSM1800 twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-D12FDA will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external smart bias tee that connects between TA-D12FDA and Node B. AISG signals pass through smart bias tee and are transmitted to other antenna line devices via TA-D12FDA.

Features • Two TMA units in one enclosure • Balanced LNA design and power failure bypass for high reliability • Alarm management: DC current load simulation • Light weight and compact design • Salt spray resistance • IP66 with Gore Tex ventilation membrane • Built-in lightning protection and vented enclosure design • EMP protection with excellent MTBF • AISG 1.1 Compatible

Product Description


ANT0ANT0 ANT1ANT1

Node BNode B Node B1Node B1To RCUTo RCU

Tx Fil

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Teeand Lightning

Protection

Tx Fil

Rx1 Fil

Rx2 Fil

Rx-Bypass

RS4

85A

LNALNA LNALNA LNALNALNALNA

LNASupervisionand AlarmGeneration

Unit


Unit

ModemModem

DC GND

RS4

85B

LightningProtection

DC Power


DC GND

Full Band Twin GSM1800 Tower Mounted Amplifier TA-D12FDA


107

Technical Specifications Electrical - Uplink Frequency Range MHz 1710-1785

Bandwidth MHz 75







Bypass Mode dB

≥ 14


Operation > 230 ± 20@+12V (Minor Alarm) Alarm Management in Normal Mode By-pass Mode

mA > 330 ± 20@+12V (Major Alarm)

Alarm Management in AISG Mode Compatible with AISG 1.1


Bandwidth MHz 75






Power, Mechanical & Environmental Modem Characteristics According to AISG standard 1.1 (Data rate:9.6kB)

RF 7/16 DIN-Female

Connectors Type AISG

8-pin Female IEC60130-9 (Pin1:+12V ,Pin3:RS485B, Pin5:RS485A, Pin7:DC

return; other pins: not connected) Operating Voltage V +10 to +15

Operating Current with Dual Ports Power Supply mA 130 ± 10 @+12V Operating Current with Single Port Power Supply (AISG Mode)

mA 240 ± 10 @+12V

Power Consume W ≤ 3 DC/OOK Node B0

Operation Mode DC Node B1

Dimensions, LxWxH (excluding connectors & mounting brackets) mm(in) 250x224x60 (9.8x8.8x2.4)

Weight kg(lb) 5 (11) Wall mounting: with 4 screws

Mounting Mast mounting: with clamp set



Operating Temperature -40 to +65


EMC oC ETS 300 342-3

RF Ports Comply with IEC 61000-4-5; 8kA, 8/20µs Lightning Protection

AISG Port RS485A，RS485 B Different mould 3kA，Common

mould 5KA ,DC and GND Different mould 3kA Environmental Class IP66

MTBF hr > 500,000


Full band Single DCS1800 Tower Mounted Amplifier TA-D12FS


108


The TA-D12FS is a DCS1800 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-D12FS will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The TA-D12FS comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-D12FS and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to six units of TA-D12FS.

Product Description


Bias Tee

Tx Fil

ANT Port

BTS Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

Ala

rmG

ener

atio

n U

nit

LNA

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

To Antenna

Full band Single DCS1800 Tower Mounted Amplifier TA-D12FS


109


Bandwidth MHz 75




Insertion Loss in By-pass Mode dB 2.2

Output 3rd Order Intercept Point dBm ≥ 25


Bypass Mode dB

≥ 14


Operation ≥ 230 (Minor alarm) Alarm Management

By-pass Mode mA

≥ 330 (Major alarm)


Bandwidth MHz 75







Operating Current mA 120 @12V

Power Consume W ≤ 1.5 Dimensions, LxWxH (excluding connectors & mounting brackets) mm(in) 250x121x60 (9.8x4.8x2.4)


Wall mounting: With 4 screws Mounting

Mast mounting: With clamp set






EMC ETS 300 342-3 Lightning protection Comply with IEC 61000-4-5; 8kA, 8/20µs Environmental Class IP66

MTBF hr > 1,000,000


Full band EGSM900 Tower Mounted Amplifier TA-E12FS


110

The TA-E12FS is an EGSM900 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-E12FS will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The TA-E12FS comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-E12FS and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to six units of TA-E12FS.


Product Description


Bias Tee

Tx Fil

ANT Port

BTS Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

Ala

rmG

ener

atio

n U

nit

LNA

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

To Antenna

Full band EGSM900 Tower Mounted Amplifier TA-E12FS


111



Bandwidth MHz 35






Active Mode dB ≥ 18 Return loss

Bypass Mode dB ≥ 14


Operation mA ≥ 230 (Minor Alarm) Alarm Management

By-pass Mode mA ≥ 330 (Major Alarm)


Bandwidth MHz 35







Operating Current mA 120 @+12V


mm(in) 252x180x61 (9.9x7.1x2.4)

Weight kg(lb) ≤ 3.5 (7.7)








EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs Environmental Class IP66

MTBF hr > 1,000,000


Twin GSM900 Tower Mounted Amplifier TA-G12FD


112

The TA-G12FD is GSM900 twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve the receive sensitivity of the base station. The usage of TA-G12FD will result in increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifier (LNA), bias tee, and lightning protection and bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external Bias Tees that connect between the TA-G12FD and PDM. Each PDM is constructed into a 19”1U form factor, and could provide power for up to three units of TA-G12FD.


Product Description


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS

ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


Twin GSM900 Tower Mounted Amplifier TA-G12FD


113


Bandwidth MHz 25







Bypass Mode dB

≥ 14



By-pass Mode mA



Bandwidth MHz 25








Power Consume per Port W ≤ 1.5 Dimensions, LxWxH (excluding connectors & mounting brackets) mm(in) 318x218x59 (12.5x8.6x2.3)

Weight kg(lb) 6.5 (14.3)






Operating Temperature °C -40 to +65 Operating Humidity % ≤ 95 EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs Environmental Class IP66 MTBF hr > 500,000


Single GSM900 Tower Mounted Amplifier TA-G12FS02


114

The TA-G12FS02 is a GSM900 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-G12FS02 will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The TA-G12FS02 comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-G12FS02 and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to six units of TA-G12FS02.


Product Description


Bias Tee

Tx Fil

ANT Port

BTS Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

Ala

rmG

ener

atio

n U

nit

LNA

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

To Antenna

Single GSM900 Tower Mounted Amplifier TA-G12FS02


115


Bandwidth MHz 25






Normal Operation dB ≥ 18 Return Loss

By-pass Mode dB ≥ 14


Operation mA > 230 ± 20 (Minor Alarm) Alarm Management

By-pass Mode mA > 330 ± 20 (Major Alarm)


Bandwidth MHz 25







Operating Current mA 120 @+12V


mm(in) 246x182x58 (9.7x7.2x2.3)

Weight kg(lb) ≤ 3.5 (7.7)










MTBF hr > 1000,000


Twin PCS1900 Tower Mounted Amplifier TA-P12FD


116

The TA-P12FD is PCS1900 twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve the receive sensitivity of the base station. The usage of TA-P12FD will result in increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifier (LNA), bias tee, lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external Bias Tees that connect between the TA-P12FD and PDM. Each PDM is constructed into a 19”1U form factor, and could provide power for up to three units of TA-P12FD.

Features • Two duplex TMA units in one enclosure • Balanced LNA design and power failure bypass for high reliability • Alarm management: DC current load simulation • Light weight and compact design • Salt spray resistance • IP66 with Gore Tex ventilation membrane • Building-in lightning protection and vented enclosure design • EMP protection with excellent MTBF

Product Description


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS

ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


Twin PCS1900 Tower Mounted Amplifier TA-P12FD


117



Bandwidth MHz 60





Output 3rd Order Intercept Point(OIP3) dBm ≥ 25


By-pass Mode dB

≥ 14



By-pass Mode mA



Bandwidth MHz 60



Absolute Maximum RF Input Power dBm 52 (CW);59 (Peak)






mm(in) 250x224x59 (9.8x8.8x2.3)











MTBF hr > 500,000


Full Band Twin WCDMA Tower Mounted Amplifier TA-W12FD


118

The TA-W12FD is a WCDMA twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-W12FD will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-W12FD and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to three units of TA-W12FD.


Product Description


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS

ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil

LNA LNA

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t

ANT0 Port

Bias Tee

BTS0 Port


ANT1 Port

BTS1 Port

Bias Tee

BTS PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

PDM

+12VAlarm

To BTS

Bias Tee

Tx Fil


Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Tee

Tx Fil

LNALNA LNALNALNALNA

Rx1 Fil

Rx2 Fil

LNA

0 A

larm

Gen

erat

ion

Uni

t LN

A0

Ala

rmG

ener

atio

n U

nit

Rx-Bypass

LNA

1 A

larm

Gen

erat

ion

Uni

t LN

A1

Ala

rmG

ener

atio

n U

nit

ANT0 Port

Bias Tee

BTS0 Port


Full Band Twin WCDMA Tower Mounted Amplifier TA-W12FD


119


Bandwidth MHz 60





Output 3rd order Intercept Point dBm ≥ 25


Bypass Mode dB

≥ 14


Group Delay per 5MHz Band ns ≤ 20


By-pass Mode mA



Bandwidth MHz 60










mm(in) 192x196x54 (7.5x7.7x2.1)

Weight kg(lb) 4 (8.8)






Operating Temperature °C -40 to +65 Operating Humidity % ≤ 95 EMC ETS 300 342-3 Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20µs Environmental Class IP66

MTBF hr > 500,000


Twin WCDMA Tower Mounted Amplifier TA-W12FDA


120

The TA-W12FDA is a WCDMA twin tower mounted amplifier for both main and diversity branch and fits with cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-W12FDA will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call performance. The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system. Power is supplied via external bias tees that connect between the TA-W12FDA and the PDM. Each PDM is constructed into a 19” 1U form factor, and can provide power for up to three units of TA-W12FDA.

Features • Two TMA units in one enclosure • Balanced LNA design and power failure bypass for high reliability • Alarm management: DC current load simulation will be generated when AISG

signal is not available • Light weight and compact design • Salt spray resistance, IP66 • Built-in lightning protection and vented enclosure design • EMP protection with excellent MTBF • AISG 1.1 Compatible

Product Description


ANT0ANT0 ANT1ANT1

Node BNode B Node B1Node B1To RCUTo RCU

Tx Fil

Rx1 Fil

Rx2 Fil

Rx-Bypass

Bias Teeand Lightning

Protection

Tx Fil

Rx1 Fil

Rx2 Fil

Rx-Bypass

RS4

85A



Unit


Unit

ModemModem

DC GND

RS4

85B

LightningProtection

DC Power


DC GND

Twin WCDMA Tower Mounted Amplifier TA-W12FDA


121



Bandwidth MHz 60







By-pass Mode dB

≥ 14



Operation > 230 ± 20@+12V (Minor Alarm) Alarm Management in Normal Mode By-pass Mode

mA > 330 ± 20@+12V (Major Alarm)

Alarm Management in AISG Mode Compatible with AISG 1.1

Electrical – Downlink Frequency Range MHz 2110-2170

Bandwidth MHz 60



Absolute Maximum RF Input Power dBm 52 (CW); 58.6 (Peak)

Inter-modulation Products in Rx Band dBm ≤ -117 (2 TX carriers at +43dBm)



Power, Mechanical & Environmental Modem Characteristics According to AISG Standard 1.1 (Data rate:9.6kB)

RF 7/16 DIN-Female

Connectors Type AISG

8-pin Female IEC60130-9 (Pin1:+12V ,Pin3:RS485B, Pin5:RS485A, Pin7:DC

return; other pins: not connected) Operating Voltage V +10 to +15 Operating Current with Dual Ports Power Supply Normal Mode---per Port

mA 130 ± 10@+12V

Operating Current with Single Port Power Supply AISG Mode

mA 240 ± 10@+12V

Power Consume W ≤ 3

DC/OOK Node B0 Operation Mode

DC Node B1 Dimensions, LxWxH (excluding connector and mountingbrackets)

mm(in) 192x196x54 (7.5x7.7x2.1)

Weight kg(lb) 4 (8.8)







EMC ETS 300 342-3 RF 8kA, 8/20µs

Lightning Protection AISG

RS485A. RS485 B Different mould 3kA. Common mould 5kA, DC and GND Different mould 3kA


MTBF hr > 500,000


Wide-band OOK Bias Tee BT-M1, BT-M2


122

Features and Product Description • Wide-band design covers 800-2170MHz range

• Injects DC voltage and OOK signal (2.176 MHz) to ALDs

• Complies with AISG 2.0/3GPP

• Extremely low insertion loss and VSWR

• Provides lightning protection for BTS

• Suitable for operating in high or low temperature, humidity and other bad environment

Technical Specifications Electrical BT-M1 BT-M2

Frequency Range MHz 800-2170 Insertion Loss (800 - 2170MHz) dB ≤ 0.15 VSWR (800 - 2170MHz) ≤ 1.2 Inter-modulation Products dBc ≤ -160 @2x43dBm Power Handling W ≥ 120 Current Capacitance A 2.3 Operational Voltage V 9-30 Impedance Ω 50

Mechanical Dimensions, LxWxH (including connectors) mm(in) 119x56x45 (4.7x2.2x1.8)

Weight kg(lb) 0.5 (1.1) BTS/Node B Port 7/16 Male 7/16 Female

Connectors ANT Port 7/16 Female 7/16 Male

Operational Humidity % <95 Temperature Range °C -40 to +60 Environmental Class IP66 (Indoor or Outdoor) Lightning Protection 8kA, 8/20µs EMC ETS 300 342-3

M6 Grounding Bolt

57

39

70119

45

Outline Drawing

BT-M1 shown

BT-M1 shown

BT-M1 shown

Wide-band Smart Bias Tee (AISG 1.1) BT-M1S, BT-M2S


123

Features and Product Description • Designed to cover 800-2170MHz

• Provides DC voltage as well as remote control signals via RF feeder cable to TMA or Antenna Line Devices (ALD)

• Complies with AISG 1.1 standard

• Extremely low insertion loss and VSWR

• Provides lightning protection for BTS/Node B

• BT-M1S is commonly installed close to BTS/Node B and BT-M2S is installed on the tower close to VET antenna when no TMA is in use

Technical Specifications Electrical BT-M1S BT-M2S

Frequency Range MHz 800-2170 Insertion Loss (800 - 2170MHz) dB ≤ 0.15 VSWR (800 - 2170MHz) ≤ 1.2 Modem Carrier Frequency MHz 2.176 Inter-modulation Products dBc ≤ -153 @2x43dBm Power Handling W ≥ 120 Current Capacity A 2.3 Power Consume W 0.8 Operational Voltage V 8-15 Impedance Ω 50

Mechanical Dimensions, LxWxH (including connectors) mm (in) 119x73x46 (4.7x2.9x1.8)

Weight kg (lb) 1.0 (2.2) BTS/Node B Port 7/16 Male 7/16 Female ANT Port 7/16 Female 7/16 Male Connectors DC/AISG Port

8-pin Male Connector 8-pin Female Connector

Operational Humidity % < 95 Temperature Range oC -40 to +65 Environmental Class IP66 (Indoor or Outdoor) Lightning Protection 8kA, 8/20µs EMC ETS 300 342-3

M8 Grounding Bolt

119

73

70

46

A

Outline Drawing

BT-M2S shown

BT-M2S shown

Power Distribution Management Unit PDM-001B/003B


124

Features and Product Description • Provide constant +12VDC power via Bias Tee and alarm handling for up

to 6 TMAs

• Can be powered by +24VDC or -48VDC alternatively

• Two variants available: PDM-001B and PDM-003B

• TMA operation status can be monitored by the PDM LED indicator

• Light weight and compact design

• Standard 1U 19’’ form factor


Input power Supply Voltage VDC -48 or +24

Input Voltage Fluctuation % 20

Output Power Output Voltage VDC +12

Maximum Output Current per Output mA 350

Number of Outputs 2 or 6

Power, Mechanical & Environmental Dimensions, HxWxD mm (in) 45x482x152 (1.8x18.9x6.0)





Operating Humidity % <95

EMC ETS 300 342-3

Environmental Class Indoor Application

Note: Measurements taken at room temperature

PDM Connectors All connectors are polarized to ensure correct cable is used and fitted properly. The description of each pin is shown in Table 1. Pin number is labelled from left to right whilst looking into the front panel.

ATT trimmer

+12V Power output

Normally OpenNormally Closed

Unit C

-48V GND +24V VIN

-- POWER

ALARM1 ALARM2VoutBVoutA

+12V Output Power LED

Power in LED

PDM-003B front-panel

PDM-003B

Power Distribution Management Unit PDM-001B/003B


125

PIN Connectors

1 2 3 4

VIN (input to PDM) +24VDC Ground Ground -48VDC

+12VDC Power Outputs Ground +12V Power Output Ground

ALARM1 Normally Open(when used will not used ALARM2)

ALARM2 Normally Closed(when used will not used ALARM1)

Table 1: Definitions of connectors on the PDM front-panel

Connector Descriptions

VIN Four-pin power input connector. The PDM is fed with -48VDC or +24VDC via this port.

+12VDC Power Output This three-pin connector provides DC power supply to the TMA. It is connected to the +12VDC power input connector (SMA-J) of the Bias Tee

ALARM1

This Two-pin connector connects to the BTS alarm terminal for alarm reporting purposes. When connect to BTS Normally open, connect this PIN, Alarm is sent to the BTS using relay*. This occurs when LNA is faulty or when PDM output voltage is outside the range of 11.75V to 12.25V. Under this condition, the auto bypass switch will be activated to ensure that the UL signals are still received by the BTS.

ALARM2

This Two-pin connector connects to the BTS alarm terminal for alarm reporting purposes. When connect to BTS Normally Closed, connect this PIN, Alarm is sent to the BTS using relay*. This occurs when LNA is faulty or when PDM output voltage is outside the range of 11.75V to 12.25V. Under this condition, the auto bypass switch will be activated to ensure that the UL signals are still received by the BTS.

Table 2: Descriptions of connectors on the PDM front-panel

Outline Drawing

ALARM 1 ALARM 2Vout BVout APOWERPOWER

Vout A Vout B ALARM 2ALARM 1

Unit CUnit B

VIN

+ 24V GND

Unit A

ALARM 1 ALARM 2Vout BVout APOWER

-48V

Note: The figure above shows front panel of the PDM-003B. The connections within each unit are the same. Each unit has oneLED indicator with one LED indicator for every output. PDM-001B just has one unit (Unit A).

luyanni

附注

“luyanni”设置的“Marked”

luyanni

文本框

126

luyanni

文本框

127

luyanni

文本框

128

luyanni

文本框

129

luyanni

文本框

130

luyanni

文本框

131

luyanni

文本框

132

133

Product Selection Guide

134


135


Copyright © 2009 Comba Telecom System Holdings Ltd. All rights reserved.

Singapore OfficeComba Telecom Systems Singapore Pte Ltd

No. 1 Kaki Bukit View

#02-10 Techview

Singapore 415941

Tel: +65 6345 4908Tel: +65 6345 4908

Fax: +65 6345 1186

India OfficeComba Telecom Ltd

Suite No. 2, TSH Business Centre,

E-172, Greater Kailash - I, New Delhi 110048.E-172, Greater Kailash - I, New Delhi 110048.

India

Tel: +91 11 4173 9997/8

Fax:+91 11 4173 9996

Thailand OfficeComba Telecom Co. Ltd

3rd Floor, T.Shinawatra Building,

94 Sukhumvit Soi 23, Sukhumvit Road,

Klongtoeynua,Wattana, Bangkok 10110,

Thailand

Tel: +66 2664 3440

Fax: +66 2664 3442

US OfficeComba Telecom Inc.

2390 Bering Drive

San Jose, CA 95131,

USA

Tel: +1 408 526 0180Tel: +1 408 526 0180

Fax: +1 408 526 0181

Corporate Headquarters and Asia Pacific SalesComba Telecom Systems Holdings Ltd

611 East Wing, No.8 Science Park West Avenue

Hong Kong Science Park,

Hong Kong

Tel: +852 2636 6861Tel: +852 2636 6861

Fax: +852 2116 6055

China Headquarters Comba Telecom Systems China Ltd

No.10 Shenzhou Road,

Guangzhou Science City Guangzhou Science City

China

Tel: +8620 2839 0000

Fax: +8620 2839 0136

EMEA Sales & SupportComba Telecom Systems AB

Gustavslundsvagen 147

SE-167 51 Bromma

Stockholm

Sweden

Tel: +46 8 253 870

Fax: +46 8 253 871

Brazil OfficeComba Telecom Ltda.

Avenida Engenheiro Luiz Carlos Berrini 1297,

cj 122, 04571-090 Brooklin Novo, São Paulo

Brazil

Tel: +55 11 5505 0549Tel: +55 11 5505 0549

Fax: +55 11 5505 0549 ext 7

Dubai OfficeComba Telecom Limited

P.O. Box 450583, DUBAI,

U.A.E.U.A.E.

Tel: +971 0 4 433 5320

Fax: +971 0 4 422 6774

Comba Antenna and Subsystem Product Catalogue v1.0_2009

Documents

Transcript of Comba Antenna and Subsystem Product Catalogue v1.0_2009