More than 30 years as the cleanest, most efficient wood fire in New Zealand.

www.pyroclassic.co.nz

Colour has never been so hot.

Min. cylinder wall temperature 600ºc required

Ceramic lining to maintain high

combustion temperatures

and heat storage

Secondaryair inlets

and load limiter

3.7kWoptionalwetback

Gas and tar droplets

Mixed hot air and gases

Secondary air preheat to over 600ºC

Turboslidestart-up air supply

Primary airinlets

Secondary combustion

Cooking surface

Hot flue gases: mainly carbon dioxide, water vapour and nitrogen High velocity heated

room air

Firewood Ash

Cool room airdrawn in

What makes a Pyroclassic Fire so unique?

More than 30 years as the cleanest, most efficient wood fire in New Zealand.

The only clean air approved wood fire to provide a genuine 12hr+ overnight burn, even with a wetback*.

All Pyroclassic Fires carry our 15 year ceramic firebox warranty.

Forget fire bricks, the unique cylindrical ceramic fire chamber of the Pyroclassic IV retains heat like a kiln.

Opt for our 3.7kW high output wetback for all your domestic hot water needs.

The 10mm steel top plate is perfect for cooking.

Suitable for homes 100 - 200+m² depending on house type.

HOW A PYROCLASSIC IV WORKS

Radiant and convection heating.

*Please note: 12hr+ overnight burn claims are based on the Pyroclassic IV installed with our Eco Flue Kit with sufficient flue draw and fuelled with dry, hardwood logs.

GET COLOURFULThe Pyroclassic IV is for lovers of colour! Choose from more than 100 colours, from bold and bright to classic neutrals. All panels are easily interchangeable so you can update your fire to match your home whenever you like.

Visit our website to download the latest colour charts.

RECOMMENDED FLUE SYSTEMSTo get the best performance from your Pyroclassic IV, we recommend that a tested and approved 100mm Eco Flue Kit with full flow vertical discharge cowl is used.

Orange x15 Sky Blue Mamba Green

PYROCLASSIC IV ACCESSORIES

WETBACKOur 3.7kW high output wetback uses an open grid format which increases the surface area of the wetback ensuring consistent hot water.

LOG RACKEnjoy the convenience of this stylish log rack. Finished in a durable ripple black powder coat.

Dimensions: W 800mm x H 1000mm x D 300mm

COOKTOP OVENMake the most of your Pyroclassic cooktop with this handy oven, mitt and trivet set.

WALL SCREENSAll wall screens are powder coated in our full colour range. Their use significantly reduces the minimum required safety distances. See the back of this brochure for more info.

Sizes:Standard: W 550mm x H 800mm x D 25mm

Corner: W 900mm x H 800mm x D 25mm (pair)

Custom: We can accommodate most sizes. Screens larger than 1m2 will incur additional charges from the standard custom price.

WOODBINSLift your Pyroclassic IV to the perfect height for loading wood with one of our woodbins. Both options are reversible, one side for stacking wood and one as a storage draw for your tools and kindling, giving you ultimate flexibility. These are finished in a durable ripple black powder coat.

Large Raised Hearth & Reversible Woodbin: A direct replacement for a traditional insulated tiled hearth, this woodbin meets all clearances required for a Pyroclassic IV.

Dimensions: W 680mm x D 950mm x H 250mm

Mini Raised Table & Reversible Woodbin: Ideal for installations when a hearth is not required because the floor itself meets the standards for a non combustible floor.

Dimensions: W 480mm x D 680mm x H 250mm

Please visit our website for more information www.pyroclassic.co.nz

BONUS ESSENTIALS KITTo say thank you for choosing Pyroclassic Fires, we include a FREE Pyroclassic Essentials Kit, valued at $115, with every fire! This set contains a rake and shovel, re-usable fire starters and moisture meter.

Full

Stai

nles

s St

eel

(sta

ndar

d)

Pain

ted

outle

t con

e w

ithst

ainl

ess

stee

l flue

Pain

ted

outle

t con

e w

ithpa

inte

d flu

e le

ngth

s

Optional Pyro Combo Raised Hearth & Woodbin (H 250mm)

AE

900mm

F

G

BH

I

900mm

PARALLEL INSTALLATION WITH PROTECTED WALLS

900mm

D

K

C

C

E

F

J

J

900mm

CORNER INSTALLATION WITH PROTECTED WALLS

Optional Pyro Combo Raised Hearth & Woodbin(H 250mm)

FIRE DIMENSIONS SHOWING WETBACK FIXING LOCATIONS

PYROCLASSIC INSULATING HEARTHThe Pyroclassic IV must sit on some form of insulating hearth. If the hearth is installed flush with a surrounding floor then it must have a minimum distance of 369mm from the front of the fire to the front edge of the hearth. The minimum width of the insulating hearth must be not less than 680mm with the Pyroclassic IV centred from each side of the hearth.If the hearth is raised, the floor protector area at the front can be reduced. For example, the Pyroclassic Raised Hearth & Woodbin is 250mm in height, which means the floor protector area at the front of the fire can be reduced.The Pyroclassic raised hearth is a powder coated steel construction and can be installed directly on to any combustible floor material.

ALTERNATIVE INSULATING HEARTH20+mm suitable insulated board with non combustible top, or masonry slab with a minimum thickness of 50mm.

PYROCLASSIC IV TECHNICAL SPECIFICATIONS

A B C D E F G H I J K

145mm 105mm 115mm 390mm 300mm 680mm 650mm 245mm 373mm 370mm 530mm

Pyroclassic IV with combustible walls or unprotected walls

480mm 350mm 370mm 740mm

WALL SCREENSOur wall screens will significantly reduce the minimum required safety distances. The side edges of the sheet metal are folded in (forming a right angle), creating a 25mm air gap. Combustible walls are protected from the hottest parts of the fire, which are the top plate and first sections of the flue. The open bottom edge of the screen sits 50mm below the top of the Pyroclassic IV and extends upwards. Cool air enters from below, runs up between the screen and the wall and exits out the top.

THE PYROCLASSIC IV HAS BEEN TESTED TO THE FOLLOWING STANDARDS AS/NZS4012:1999 • AS/NZS4013:1999 • AS/NZS4012:2014 • AS/NZS4013:2014AS/NZS2918:2001 • EN13240:2001 • A2:2004 • ECan authorisation: 121121 (Dry), 121122 (Wet)

PYROCLASSIC FIRES ARE A MEMBER OF THE NZHHA & AHHA

SPECIFICATIONS Dimensions: L 650mm x W 455mm x H 625mmWeight: Approximately 140kgFire chamber volume: 20.8 litresTemperature: 800˚C - 1100˚C (1500˚F - 2000˚F)Maximum heat output: >15kWUseful heat output: 2kW - 8kWFuel consumption: 1.1kg/hrEmission rate: 0.3g/kg (Dry and Wet)Efficiency rate: 74% space heating (Dry) 65.3% space heating with 18% water heating (Wet)Air control: Primary & secondary, fully automaticStart up control: Manually adjustable TurboslideCooktop area: 0.26m² - 10mm thick plateFlue diameter: 100mm standard (4”)

Freestanding model only. No insert available.

INSULATING HEARTH SURFACE HEIGHT FROM COMBUSTIBLE FLOOR

Height 0mm 15mm 25mm 40mm

MINIMUM DISTANCE IN FRONT OF PYROCLASSIC TO HEARTH FRONT EDGE

Depth 370mm 345mm 320mm 300mmE

PYROCLASSIC IV WITH WALL SCREENS OR WITH NON COMBUSTIBLE WALLS

WARRANTY: The ceramic firebox in the Pyroclassic IV is warranted for 15 years against defective material or workmanship, provided the fire is used and installed according to the manufacturer’s operating and installation instructions. All other items are warranted for 12 months. This warranty does not cover damage or failure caused by tampering, carelessness, abuse or misuse. NOTE: The warranty only applies to the original owner and cannot be transferred.

510

570

Disclaimer: +/- 2mm measurement variation.

Pyroclassic IV side profile with wetback fixing heights

BACK TO WALL & NO SIDE WALLS

With Pyroclassic standard wall screen 550mm wide

B

550mm

800m

m

50mm

105mm Wall to back of Pyroclassic IV

480+mm

Unp

rote

cted

Wal

l

370mm if flush with floor