COLMAR production ranges from industrial wheeled loaders, tracked loaders, pedestal cranes, balers,...

www.colmarspa.com

UK

MISSION

In the last ten years COLMAR has become a world-wide reference point in the recycling field. This has been accomplished by offering a

range of products able to satisfy the requests of varying markets, by expanding internationally with satellite companies in the United States,

Great Britain and Russia, and by constructing a detailed commercial web that avails itself with direct agents and distributors globally.

Our company philosophy is strongly based on the premise of consistently creating a collaborating relationship with our customers. In this type

of association, each observation or suggestion can grow into improvements which benefit both parties.

We are fully aware that COLMAR’s success is due to the trust that customers place in us with their daily choice to rely on our equipment. For

this reason, among others, we are always willing to look to the future with enthusiasm, endeavouring to improve our products and services

with confidence that this policy will continue to reward our company.

PROJECTED INTO THE FUTURE

COLMAR began its activity in 1963, thanks to the idea of two simple guys. These men started producing machines for the earth-moving and agricultural sector, assembling different parts of military machines left by the American army after World War II.

In 1967, the first COLMAR Railroad Loader was produced. The machine was used in the construction of the of the Rome-Venice railroad line in Italy.

In 1968, COLMAR produced the first industrial loader by installing a turn able superstructure designed for lifting of heavy loads on a lorry chassis.

In the early 70’s, COLMAR, owing to the experience gathered in the sector of earth moving machines, increased and widened its product range. Furthermore, significant improvements of the design procedures, aimed to spur the production of industrial loaders and of equipment manufactured for the construction and maintenance of railroads.

In order to expand its product range for the metal recycling business during the 90’s, COLMAR began the manufacturing of Balers and Shear Balers for ferrous and non ferrous scrap.

In 2005, the new CAYMAN series horizontal shears emerged as a new product on the world market. These machines are characterized by their ease of use, their low maintenance requirements, and their high production output.

COLMAR production ranges from industrial wheeled loaders, tracked loaders, pedestal cranes, balers, shear balers, horizontal shears, specific rail road loaders, and special hydraulic machines.

Our main goal is to provide customer satisfaction, and for this reason all of our products and services are thought out and projected starting from an attentive analysis of their necessity and application. From here, these machines are built with the best materials and technologies available.

Our technical office is at the customer’s disposal in order to satisfy special requests on machines, equipment and accessories.

Our engineers are always available for proposing further machine development concerning the products in the catalogue, for those requiring customized solutions.

The assistance service offered by our staff, our technical documentation, together with the spare parts drawings of all machines, gives quick maintenance service for the operating machines, avoiding long and expensive loss of time.

FIRST GOAL: THE CUSTOMER

FIRST GOAL: THE CUSTOMER

C700

INDUSTRIAL LOADERS

Industrial loaders for recyclingCOLMAR’s industrial loaders are widely employed within the wood industry, for loading/unloading operations of wood, in piling logs in a yard, for fixing of materials in the sawmills, and also in order to predispose trunks and boards on stocks.The specific equipment such as pinchers and buckets for trunks, the front blade or the tracked versions for slippery grounds, allow one to obtain a specificallyfast and productive customized machine, which has very low management costs.

C403

Load sensing loadersThe technical characteristics of the new loader C350HE are really innovative:• Rexroth Load Sensing new hydraulic system allows more fluid and precise machine movements;• high machine noiseless guaranteed by the new noise flow system conveying them inside the engine bonnet;• semi-pantograph cab elevation dumps the machine vibrations during the operations. Moreover the semi-pantograph structure has the advantage to allow a complete rear view;• control panel on the steering column to allow the operator’s view when he is using the bucket close to the machine;• new and more comfortable seat;• easier machine maintenance by means of better filters access, the better disposition of the greasing points and the platforms system, ladders and handrail bar to make safe these operations;• Terminal hydraulic pipes usually subject to collision and breaking, in this model are safely put inside the second arm.

Hydraulic system: The load sensing hydraulic system assures the maximum result by distributing the oil flux where andwhen needed. The piston pumps with varying capacity give exactly the oil flux required, without anywaste, they grant low fuel consumption and a higher productivity of the machine, which automaticallyperforms the operator’s commands moving contemporaneously. The load sensing mechanics allowsyou to operate faster and with greater precision. Additionally, the vibration reduction allows for a morecomfortable environment in which to work.

Transmission: Four wheel hydrostatic transmission, axial piston Hydraulic motor, variable displacement auto regulator, 2 gear velocity selectable from the cabin. Axial with epicyclical reductions on the hub. Oscillating front axle with hydraulic block. Wheels: coupled front and rear wheels with plain super elastic rings. Steering gear: device commanded from the cabin by powersteering supplied by a proper oil gear pump.

INDUSTRIAL LOADERS

NEW MODEL C350HE

C401

R301

INDUSTRIAL LOADERS for the movement of WOOD

Industrial loaders for wood handlingCOLMAR’s industrial loaders are widely employed in the wood handling, on the loading/unloading operations of wood, in piling logs in a yard, fixing materials in the sawmills, and also in order to predispose trunks and boards on stocks. The specific equipment such as pinchers and buckets for trunks, the front blade or the tracked versions for slippery grounds, these allow you to obtain a specifically customized machine, fast and productive with very low management costs.

R650

INDUSTRIAL LOADERS TRACKED VERSION

Industrial loaders tracked versionCOLMAR also offers a range of loaders in a fixed or variable track version.COLMAR tracked loaders are ideal to move on cross-country ground, wood and sand. They permithigh stability while manoeuvring materials in tough terrain conditions, as opposed to the normal wheeled loaders function.

SCORPION

HYDRAULIC SHEARS

Scorpion shearsScorpion shears are used in all demolition scrap yards which cut and recover ferrous materials such as structural steel, pipelines, gasoil tanks, rail way coaches, etc…then easily recycled. This shear series has been thought according to a particular advanced project apt to increase its performance. Their structure is made of the most innovative steel types: light, resistant and highly wear proof.Scorpion’s whole series have an hydraulic device which increases the opening/closing speed of the mobile shank; furthermore, it is characterised by the presence of a powerful cylinder which extends an extraordinary force, in order to face all working conditions.The 360° hydraulic rotation - a standard for all models - allows a perfect and effective positioning of the equipment.The structure of the Scorpion is completed by an effective system which permits to maintain the guide of the mobile shank during the shearing operation.All shear cutting points are interchangeable and their substitution is easy and can be performed in a very short time, also avoiding hard facing operations, generally performed by specialised personnel, therefore considerably reducing maintenance costs and wastes of time due to out of order.

F63

F52

F22

PEDESTAL CRANES

Pedestal CranesCOLMAR pedestal cranes are engineered for handling scraps and solid urban waste. They are built of a solid electro welded steel structure and operated by hydraulic systems consisting of components of the highest quality. COLMAR pedestal cranes are equipped with safety and security systems to protect the operator and machine alike. Upon request, COLMAR’s technical office designs and realizes solutionsfor any particular requirement.

RAILROAD LOADERS ON TIRES AND ON TRACKED VERSION

Rail road loadersCOLMAR railroad loaders are used for the construction and maintenance of railway lines.The machines can be equipped with different accessories: rail pincers, hydraulic or mechanical frame beams for moving sleepers, tamping units, pincers for different usage, hydraulic hammers, hydraulic bush-grass cutters.COLMAR railroad loaders are made of a strong electro welded steel and are outfitted with hydraulic systems made with high quality components. The loaders are complete with security systems and can be adapted to work in different countries.

The range of machines includes loaders from 16 to 30 ton, with diesel and turbo diesel engines from 51 kW to 112 kW.

For further information, ask us for our rail road loaders catalogue.

B2000

B3000

B4500

B3000

AUTOMATIC COMPACTING BALERS

Compacting baler sequence (for B2000, B3000 and B4500)

Remote control with automatic functionsAfter loading, the machine’s compacting cycle can be controlled via a remote sequencial procedure. The remote control is essential when the operator is controlling the machine from the loader used to feed the baler.

BalersCOLMAR balers are used as compactors in the scrap metal industry for the recovery of wastefrom industrial processes, or in the recycling of aluminium cans or other compactable materials.The balers can be equipped with an integral mechanical crane for loading materials, or can be fedby an industrial loader.The produced cube of compacted materials drastically reduces transport and storage costs.

Roll-on-roll-off system

B5000

B5000PM


TransportationAll balers (except the model B5000 HD) can be easily loaded onto and unloaded from normal trucks, thanks to the roll-on-roll-off system. On request, they can be fixed on a suitable truck, trailer, or semi-trailer. The B5000 HD model can be fixed onto a suitable trailer or semi-trailer.

The Lifting Cylinders equipment: Balers can be equipped with four lifting cylinders in order to load and unload from a standard semi-trailer.In this case, the baler automatically lifts with no use of a crane, the truck then can easily move under the machine, after which the lifting cylinders retract and the baler is ready to be moved.

B6200SW


PortabilityThis range of balers can be permanently installedon a semi-trailer, in order be transported to other locations. The machine works autonomously through its hydraulic system which is built in the trailer and the loading boom arm for the handling of the scrap material.

Automatic baler model B6200SWThe great utility of this machine, which is equipped with 2 large diameter axial pushing pistons,is evidenced in its considerable compaction power of the scrap material within a small axial space. This makes it possible to install the machine on suitable semi-trailers in order to transport it.Moreover, its per-hour-output, is very high and the baled material can be collected in the middleof the container, which makes loading and unloading the baler much easier.

Automatic compaction sequence• Baling • Doors opening • Reduction to the minimum of the engine RPM

On request all balers and shear balers can be equipped with the following option: electrical engine380/480 V - 50/60 Hz voltage.

SB4500/400

AUTOMATIC SHEAR BALERS

Automatic shear balers COLMAR shear balers are used as compactors in the car crushing industry, for the recovery ofwaste from industrial processes and in the recycling industry. For the same purposes they can also be used in the shear mode. the automatic cycle for compacting and cutting makes these machines particularly efficient for the processing of scrap materials.

Radio remote control with automatic function After the loading, the machine can work in the automatic cycle made for compacting or cutting sequences and canbe controlled with the radio remote control.This device is essential when the operator sits on a separate loader to feed the baler/shear baler.

SB6200/800


The machine, in baler mode, pushes out the bale, through the hydraulic bulkhead, at the end of the compaction cycle The shearing function makes it possible to cut materials that are difficult tocompact, such as metal rods, rails, pipes and metal girders into small pieces. The compaction, baling and cutting-to-size of waste materials allowsthe drastic reduction of transport and storage costs.

Automatic sequence of shearing:• Bailing• Movable wall opening• Material stopped by blocking sheet head• Shearing at pre-set length• Pusher retraction• Doors opening• Rpm reduction to minimum

Baler mode Shear mode

Diesel engine: 4-stroke diesel, direct injection, turbocharger and intercooler, liquid cooling, assembled on anti-vibration supports, sound insulated engine compartment.

Hydraulic system:Distribution blocks with electrically operated logical valves and re-generating function on the shear operation.

Structure materials:• Structure in Weldox® 700-T1 A• Box in abrasion resistant steel Hardox® 450• Shear structure Fe 510 C• Shear blades 45NiCrMoV16

EAGLE 1000

EAGLE 1000

AUTOMATIC SHEAR BALER EAGLE range

This last project arises from the ambition of COLMAR to produce machines of extremely high quality and performance which are superior to any other product on the market;thus confirming its world leadership in the field of balers and shear balers. These shear balers have 6 and 7 meters long boxes, their cutting power can reach 1.250 tons, and the high speed of these machines allow a productivity, which can reach 50 tons per hour of cut material.

CAYMAN 1000CAYMAN 777

CAYMAN 1000

CuttingThe scrap is cut with the guillotine horizontal shear. The cut material is contained by a plate located under the portable blade holder that pre-determines the length of the cut.

Blocking sheetThe blocking sheet is located inside the structure of the machine, at the entranceof the shear itself, close to the material gathering plane. Its function is to compact the material to increase its density, and convoy the material to be cut.

OUTPUT High output because

it works on a continuous motion system

VERSATILITY High versatility in the

processing of ferrous andnon-ferrous materials.

OPERATION Easy to operate

RELIABILITY Provided with

autodiagnostical device andautomatic greasing system

Useto cut the scrap into su table “mill ready” pieces that also have the correct dimensions to best maximize use of available storage space, and by doing so, reducing transport expenses.

CAYMAN HORIZONTAL SHEARS

Transportation: Intended for use in multiple locations, these horizontal shears can be easily loaded and unloaded from a normal truck by means of four cylinders installed on the machine body.

Both weight (30 ton) and dimensionscomply with road traffic regulations.

1) Loading

2) Compaction of material (high density)

3) Cutting of material

4) Opening for loading

C403

971012000 2500

2450

3170

2700

C350HE

3200

78008000 2250

2500

C401

86008300 2500

2450

3170

2470

875010000 2500

2450

3170

2470

C402

C350HE C401 C402

AC = Air conditioner, R = Radio, EG = Electro hydraulic generator, FB = Front hydraulic blade, MP = Magnetic plate, FS = Front hydraulic stabilizers, LSE = Load Sensing, RS = hydraulic rear stabilizers, 4WD = 4 wheel drive, MCG = Manual centralized greasing system, ACG = Automatic centralized greasing system.

Operating characteristics Machine weight

Max lifting arm capacity/boom extension Loading boom

Technical characteristics Diesel engine Engine power

N° of cylinders / cubic capacity Cooling system

Engine compartment Engine supports

Hydraulic system Pumps

Operating pressure High pressure system

Pipe fittings Oil cooling

Front and rear tyres Service and emergency brakes

Parking brake Power steering

Transmission Hydraulic motor

Axles Swing axle locking

Speed first gear Speed second gear

Sound insulated cabin Seat

Fuel tank capacity Hydraulic oil tank capacity

Accessories Standard Optional

16 ton2750 daN / 7,6 m

fixed L: 8 m or telescopic L: 7,6 m

Turbo-charged D. I.68 kW - 2200 Rpm

4 / 4400 c.c.cooling liquid

sound insulated damper monted

Load Sensing275 bar

flexible hoses / tubesORFS

air/oil cooler N°8 solid beads tires, size:9.00/20

pedal operated hydraulics mechanical gear pump

4 wheel drive variable disp. axial pistons

epicyclic reduction gear (hubs) hydraulic 0-4 km/h

0-15 km/h semipantograph hydraulic elevation

anatomically adjustable210 L230 L

FB - RS - 4WD - LSE - MCG

AC - REG (7 kW) - MP (Ø1130 mm)

ACG

24,5 ton4200 daN / 8,3 m

telescopic L: max.8,3 m




N° 2 axial piston, n° 2 gear350 bar


air/oil cooler N°8 solid beads tires, size: 10.00/20



epicyclic reduction gear (hubs) hydraulic 0-5 km/h0-17 km/h

elevated hydraulically anatomically adjustable

220 L270 L

FB - RS - 4WD

LSE - RS - FS - AC - RMCG - ACG

EG (8,5 kW) - MP (Ø1130 mm)

26 ton3380 daN / 10 m

fixed L: 10 m










pantograph hydraulic elevation anatomically adjustable

220 L270 L

FB - RS - 4WD

LSE - RS - FS - AC - RMCG - ACG

EG (8,5 kW) - MP (Ø1130 mm)

INDUSTRIAL LOADERS

C605

2750

3000

3300

1240015000 3000

C602

2750

3000

3300

1070012000 3000

2750

300033

0010900

11000 3000

C601

C605C602C601C403

AC = Air conditioner, R = Radio, EG = Electro hydraulic generator, FB = Front hydraulic blade, MP = Magnetic plate, FS = Front hydraulic stabilizers, LSE = Load Sensing, RS = hydraulic rear stabilizers, 4WD = 4 wheel drive, MCG = Manual centralized greasing system, ACG = Automatic centralized greasing system.

27 ton3250 daN / 12 m

fixed L: 12 m











220 L270 L

FB - FS - RS - 4WD - MCG

LSE - AC - R - ACG

EG (8,5 kW) MP (Ø1130 mm)

36 ton6590 daN / 11 m

telescopic L: max. 11 m











310 L400 L

FB - FS - RS - R - 4WD - MCG

AC - R - ACG

EG (11 - 15 kW)MP (Ø1250 - 1450 mm)

36,5 ton 5260 daN / 12 m

fixed L: 12 m




N° 3 axial piston, n° 2 gear 300 bar





epicyclic reduction gear (hubs) hydraulic

0-5 km/h 0-12 km/h


310 L 400 L


AC - R - ACG

EG (11 - 15 kW)MP (Ø1250 - 1450 mm)

39 ton3660 daN / 15 m

fixed L: 15 m











310 L400 L


AC - R - ACG

EG (11 - 15 kW)MP (Ø1250 - 1450 mm)

INDUSTRIAL LOADERS

C750C700C650

700

2950

4700

3300

1350016800 3000

C700

650

2950

4700

3300

1240015000 3000

C650

750

2950

5100

3500

1550019800 ( 18300 ) 3300

C750

AC = Air conditioner, R = Radio, EG = Electro hydraulic generator, MP = Magnetic plate, FS = Front hydraulic stabilizers,RS = hydraulic rear stabilizers, 4WD = 4 wheel drive, MCG = Manual centralized greasing system , ACG = Automatic centralized greasing system.



Technical characteristics Diesel engine Engine power

N° of cylinders / cubic capacity Cooling system


Hydraulic system Pumps

Operating pressure High pressure system


Front and rear tyres Service and emergency brakes

Parking brake Driver power steering

Transmission Hydraulic motor

Axles Swing axle locking

Speed first gear Speed second gear

Sound insulated cabin Seat

Fuel tank capacity Hydraulic oil tank capacity


50 ton4100 daN / 19,8 m

fixed L: 19,8 m ( 18,3 m )

Turbo I.D. Common Rail224 kW - 2200 Rpm









Double pantograph hyd. elevation anatomically adjustable

700 L600 L

FS - RS - 4WD - R - ACG - LSE

AC

EG (21 kW)MP (Ø1450 mm)

40 ton4200 daN / 16,8 m

fixed L: 16,8 m

Turbo I.D. Common Rail186 kW - 2200 Rpm










450 L500 L


AC

EG (21 kW)MP (Ø1450 mm)

40 ton5000 daN / 15 m

fixed L: 15 m

Turbo D.I. Common Rail186 kW - 2200 Rpm










450 L500 L


AC

EG (21 kW)MP (Ø1450 mm)

FIXED INDUSTRIAL LOADERS

F63F52F22

16000

3000

2580F63

12000

2900

(500

0)20

00

F52

F22

7100

1960


Max lifting arm capacity/boom ext. Loading boom

Hydraulic unit position Technical specifications

Electrical motor / power Electrical motor / tension

Frequency Protection

Engine compartment Servo controls

Hydraulic system valves

Working pressure High pressure circuit


Turret rotation

Brake Slewing ring

Rotation speed Driver’s cab

Seat

Control

Hydraulic oil tank capacity

2,5 ton (with column h=1,5m)950 daN / 7,0 m

telescopic / 7,00 - 7,10 m / 2 elementsremote installation

37 Kw380/440 V50/60 Hz

IP 55sound insulated

24 V1 fixed capacity pump

220 barflexible hoses / tubes

JICair/oil cooler - engine 1,5 kW-220/380V

N°1 radial piston hydraulic motor epicyclic reductor

integrated braking valves for the Hydraulic motordouble row crown diam. Ø 640 mm

0 - 8 Rpmsound insulated boarderless visibility

anatomically adjustablecontrols integrated in armrests.

hydraulic joysticks, analogic panel.

150 L

30 ton (with column h=5m)3300 daN/12,00 m

fixed / 12,00m / 2 elementsincluded

55 Kw380/440 V50/60 Hz


24 VLFSS (Logic Flow Summation System)

300 bar

flexible hoses / tubes ORFS

air/oil cooler - engine 1,5 kW-220/380V N°2 axial piston hydraulic motorsepicyclic reductor - negative brake


0 - 3 Rpmsound insulated - 360 degrees visibility

front glass cushioned into the roofanatomically adjustable

controls integrated in armrests.hydraulic joysticks, analogic panel.

400 L

31,5 ton (with column h=1m)5000 daN/16,00 m

fixed / 16,00 m / 3 elementsremote installation

90 Kw380/440 V50/60 Hz


24 VLSR

280 barflexible hoses / tubes

ORFSair/oil cooler - engine 1,5 kW-220/380V

N°2 axial piston hydraulic motorsepicyclic reductor - negative brake


0 - 5 Rpmcontrol station with panoramic visibility

anatomically adjustable controls integrated in armrests.

electro-joystick for the allowance of proportional movements. PLC (Programmable Logic Controller)

control system/ touch-screen/ net link.1000 L

FIXED INDUSTRIAL LOADERS

Accessories on request: Remote control / joystick(*), Angled sensors for restricted working zone (*) ( * Standard on model 638FE ) Centralised greasing system with manual pump; Automatic central greasing system; Air conditioner; Automatic air conditioner; Radio; Magnetic system; Magnetic plate Ø 1130mm - 1250mm - 1450mm; Grab capacity 1500 L.

R301 R401 R402

R403

R301 R401

R402

45009710

12000 2500

2500

25003200

600

3100

2900

2450

70007600 2150

36402500

500 37108600

8300 2500

2500

2500500

3100

45008750

10000 2500

2500

3100

3000500

TRACKED INDUSTRIAL LOADERS

24,5 ton3600 daN / 10 m

fixed L: 10 m

turbo-charged direct injection106 kW - 2200 Rpm


sound insulateddamper monted

N°2 axial piston, N°2 gear350 bar


air/oil cooler fixed track model

variable disp. axial pistons 0-1,9 km/h 0-3,7 km/h

hydraulically elevated anatomically adjustable

220 L240 L

MCG

AC - REG (8,5 kW)

MP (Ø1130 mm)

19,5 ton3150 daN / 8,3 m

telescopic L: max. 8,3 m









220 L240 L

AC - R - FB

EG (5 - 7 kW)MP (Ø1130 mm)

14 ton2500 daN / 7,6 m

telescopic L: max. 7,6 m









180 L200 L

AC - R - FB

EG (5 kW)MP (Ø950 mm)



Technical specifications Diesel engine Engine power

N° of cylinders /cubic capacity Cooling system


Hydraulic system Pump

Operating pressure High pressure circuit


Under carriage Hydraulic motor Speed first gear

Speed second gear Sound insulated cab

Seat Fuel tank capacity

Hydraulic oil tank capacity Accessories

Standard Optional

AC = Air conditioner, R = Radio, EG = Electro hydraulic generator, FB = Front hydraulic blade, MP = Magnetic plate, MCG = Manual centralized greasing system, ACG = Automatic centralized greasing system.

R601

503010900

11000 3000

2750

29803780

600

3300

R605

503012394

15000 3000

2750

29803780

60033

00

R650

650 C

503012394

15000 3000

2950

29803780

600

3300

R650R605R601R403

TRACKED INDUSTRIAL LOADERS

27 ton3000 daN / 12 m

fixed L: 12 m






air/oil cooler variable track model



220 L240 L

MCG

AC - REG (8,5 kW)

MP (Ø1130 mm)

36 ton6590 daN / 11 m

telescopic L: max. 11 m







variable disp. axial pistons0-2,5 km/h 0-3,7 km/h


310 L400 L

MCG

AC - REG (11 - 15 kW)

MP (Ø1250 - 1450 mm)

39 ton 3200 daN / 15 m

fixed L: 15 m




N°3 axial piston, N°2 gear 300 bar





310 L 400 L

MCG

AC - R - ACG

EG (11 - 15 kW)MP (Ø1250 - 1450 mm)

39 ton3300 daN / 15 m

fixed L: 15 m









450 L500 L

ACG - LSE - R

AC

EG (11 - 15 kW)MP (Ø1250 - 1450 mm)

AC = Air conditioner, R = Radio, EG = Electro hydraulic generator, FB = Front hydraulic blade, MP = Magnetic plate, MCG = Manual centralized greasing system, ACG = Automatic centralized greasing system.

Colmar reserves the right to amend the data contained within this brochure at any time.

5600 (L)5400 (T)

3350 (L)2450 (T)

2950

(L)

2560

(T)

B2000

7600 (L)6400 (T)

3350 (L)2450 (T)

2950

(L)

2560

(T)

B3000

10780 (L)7750 (T)

2950

(L)

3350 (L)2450 (T)

B4500

8000 (T)11700 (L) 3450 (L)

2550 (T)

3300

(L)

2800

(T)

B5000

B2000 B3000 B4500150 ton/each

105 ton460 x 460 mm4,0 - 8,0 ton/h

10,0 lt/h

21.500 kg 4.500 mmS355J2G3

Hardox® 400turbo-charged direct injection

106 kW 2200 Rpm4 / 4400 cmccooling liquid

6 way control valve240 bar

air/oil cooler580 L700 L190 L

IB - R4 - LC - AV - WH - ES - ACC RC - R - AG - AC - LBA - EE (90 kW)

100 ton/each105 ton

460 x 460 mm3,0 - 7,0 ton/h

10,0 lt/h

16.000 kg 3.000 mmS355J2G3


106 kW - 2200 Rpm4 / 4400 cmccooling liquid



HB

WH - ES - IB - R2 - LC - AV - ACC

RC - R - AG - AC - LBA - EE (90 kW)

100 ton/each90 ton

300 x 300 mm1,5 - 3,0 ton/h

10,0 lt/h

14.000 kg 2.000 mmS355J2G3





HB

WH - ES - IB - R2 - LC - AV

ACC - RC - AG - EE (90 kW)

Operating characteristics Max force 1. and 2. door

Max force pushing piston Dimension of baled material

Output (*) Average fuel consumption

Technical specification Weight

Length of container Structure Container

Diesel engine Engine power

Number of cylinders/cubic capacity Engine cooling system

Hydraulic system valves Operating pressure hydraulic system

Cooling of hydraulic oil system Hydraulic oil tank capacity

Hydraulic oil circuit total capacity Fuel tank capacity


(*) The output values may vary depending on the properties of the material treated and working conditions.

AUTOMATIC BALERS

(T) = transportation configuration(L) = working configuration

LBA = Loading boom arm (weight 2500Kg), RC = Remote control, HB = hydraulic bulk, EE = Electrical engine, ACC = Automatic compacting cycle, AG = Automatic greasing system, WH = Hydraulic oil heating system, AC = Air conditioner, R = Radio, LC = 4 lifting cylinders, AV = Application on vehicle, R4 = Roll on roll off with 2 rear stabilizers and 2 front stabilizers, ER2 = Europe roll on roll off with 2 rear stabilizers, ES = Electric hydraulic oil heating system, IB = I beam for fixation on basement, R2 = Roll on roll off with 2 rear stabilizers.

9200 (T)12700 (L) 3450 (L)

2550 (T)

2400

B5000PM

3300

(L)

2850

(T)

9700 (T)12200 (L) 3450 (L)

2550 (T)

B5500

14400 2450

3135

2825

B6200SW

B6200SWB5500B5000PMB5000

175 ton/each110 ton

860 x 640 mm10,0 - 14,0 ton/h

10,0 lt/h

22.500 kg 5.000 mmS355J2G3






175 ton/each110 ton

860 x 640 mm10,0 - 14,0 ton/h

10,0 lt/h

20.000 kg 5.000 mmS355J2G3





HB


175 ton/each110 ton

860 x 640 mm9,0 - 15,0 ton/h

11.0 lt/h

25.000 kg 5.500 mmS355J2G3

Hardox® 450turbo-charged electronic injection


DENISON manifold250 bar

air/oil cooler700 L1100 L 190 L

IB - R4 - LC - AV - WH - ES - ACC - RC

LBA - R - AG - AC - HB - EE (90 kW)

630 ton2 x 137 ton

860 x 640 mm9,0 - 16,0 ton/h

19.5 lt/h

40.800 kg 6.200 mmS355J2G3

Hardox® 450turbo-charged electronic injection CDI


DENISON manifold280 bar

air/oil cooler1000 L1600 L 240 L

IB - ACC

LC - AV - WH - ES - RC - LBA

R - ACC - AC - EE (2X55 kW) (+1)

AUTOMATIC BALERS

LBA = Loading boom arm (weight 2500Kg), RC = Remote control, HB = hydraulic bulk, EE = Electrical engine, ACC = Automatic compacting cycle, AG = Automatic greasing system, WH = Hydraulic oil heating system, AC = Air conditioner, R = Radio, LC = 4 lifting cylinders, AV = Application on vehicle, R4 = Roll on roll off with 2 rear stabilizers and 2 front stabilizers, ER2 = Europe roll on roll off with 2 rear stabilizers, ES = Electric hydraulic oil heating system, IB = I beam for fixation on basement, R2 = Roll on roll off with 2 rear stabilizers.

SB3000/400

8700 (L)7000 (T)

3300

(T)

3350 (L)2450 (T)

SB4500/400

11470 (L)8420 (T)

3300

(T)

3350 (L)2450 (T)

9650 (T)13015 (L)

3745

(L)

3160

(L)

2850

(T)

2550 (T)3450 (L)

SB5000/700

SB3000/400 SB4500/400

(T) = transportation configuration(L) = working configuration


100 ton/each105 ton

460 x 460 mm3,0 - 7,0 ton/h

400 ton3,0 - 6,0 ton/h

10,0 lt/h

16.000 kg 7.000 kg

included on the baler23.000 kg

3.000 mmS355J2G3

Hardox® 400S355J2G3

45NiCrMoV16turbo-charged direct injection

106 kW - 2200 Rpm4 / 4400 c.c.cooling liquid

6 way control valve240 bar / 280 bar

air/oil cooler550 mm

automatic500 L700 L190 L

IB - ACC - BS - AG

LC - AV - RC - R - LBA

WH - ES - EE (90 kW)

150 ton/each105 ton

460 x 460 mm4,0 - 8,0 ton/h

400 ton3,0 - 6,0 ton/h

10,0 lt/h

21.500 kg 7.000 kg

included on the baler28.500 kg 4.500 mmS355J2G3


45NiCrMoV16turbo-charged direct injection


6 way control valve240 bar / 280 bar


automatic580 L750 L190 L

IB - ACC - BS - AG

LC - AV - RC - R - LBA

WH - ES - EE (90 kW)


Max force pushing piston Dimension of baled material

Output (*) Max shear force

Shear output (*) Average fuel consumption

Technical specification Baler weight

Shear weight Hydraulic unit weight

Total weight of the machine Length of container

Structure Container

Shear structure Cutting blades Diesel engineEngine power


Hydraulic system valves Operating pressure of the hydraulic system

Hydraulic oil cooling system Cutting blade length

Shear greasing system Hydraulic oil tank capacity

Hydraulic oil circuit total capacity Fuel tank capacity


(*) The output values may vary depending on the properties of the material treated and working conditions.

LBA = Loading boom arm (weight 2500Kg), RC = Remote control, ACC = Automatic compacting cycle, P = Pre-loading, R = Radio, AG = Automatic greasing system, EE = Electric engine, WH = Hydraulic oil heating system, AC = Air conditioner, LC = 4 lifting cylinders, AV = Application on vehicle, BS = Blocking sheet, PWR = Covered Power unit, ES = Electric hydraulic oil heating system, IB = I beam for fixation on basement.

SB6200/800

4500

600

15300

4980

2350

2800 2800

2490

SB6200/800R

3850

15300 2570

SB6200/800SB6200/800RSB5000/700

260 ton/each170 ton

860 x 640 mm9,0 - 16,0 ton/h

800 ton8,0 - 10,0 ton/h

12,0 lt/h

33.000 kg19.000 kg5.000 kg

57.000 kg 6.200 mmS355J2G3


45NiCrMoV16turbo-charged electronic injection

129 kW - 2200 Rpm6 / 6.000 c.c.cooling liquid

DENISON manifold240 bar / 270 bar


automatic1000 L1600 L 190 L

PWR - ACC - BS - AG

P - RC - R - LBA - AC

WH - ES - EE (132 kW)

260 ton/each170 ton

860 x 640 mm9,0 - 16,0 ton/h

800 ton8,0 - 10,0 ton/h

12,0 lt/h

40.000 kg19.000 kg


6.200 mmS355J2G3



129 kW - 2200 Rpm6 / 6.000 c.c.cooling liquid

DENISON manifold240 bar / 270 bar


automatic1000 L1600 L 190 L

ACC - BS - AG

P - RC - R - LBA - AC

WH - ES - EE (132 kW)

175 ton/each170 ton

860 x 640 mm10,0 - 14,0 ton/h

700 ton7,0 - 9,0 ton/h

12,0 lt/h

26.500 kg19.000 kg


5.000 mmS355J2G3




BOSCH/RR manifold240 bar / 270 bar


automatic 800 L1400 L 190 L

IB - ACC - BS - AG P - RC - R - LBA - AC

WH - ES - EE (132 kW)


LBA = Loading boom arm (weight 2500Kg), RC = Remote control, ACC = Automatic compacting cycle, P = Pre-loading, R = Radio, AG = Automatic greasing system, EE = Electric engine, WH = Hydraulic oil heating system, AC = Air conditioner, LC = 4 lifting cylinders, AV = Application on vehicle, BS = Blocking sheet, PWR = Covered Power unit, ES = Electric hydraulic oil heating system, IB = I beam for fixation on basement.

EAGLE 1000

4175

69152500 7000 (6000)1675

18030 (16030)

EAGLE 1000

480 ton/each180 ton170 ton

900 x 600 mm900 - 1500 kg/mc

1000 ton24,0 - 50,0 ton/h

155.000 kg7.000 mmS355J2G3


45NiCrMoV16no.3 electric motors VEM/SEIPEE 396 kW (3 x 132 kW) - 1500 Rpm

Voltage: 380/480 V - 50/60 Hzforced air cooling circuit in the motors

DENISON distribuiting block250 bar / 350 bar

air/oil cooler1100 mmautomatic

7500 L8500 L

RC - HB - ACC - AG - EE - PLBA - WH - AC - R - CTR


Max force pushing pistonBlocking sheet force

Dimension of baled material Density of baled material (*)

Max shear force Shear output (*)

Technical specification Total weight of the machine

Length of container Baler structure

Container structureShear structure Cutting blades

Motors typeMotors powerPower supply

Engine cooling system Hydraulic system valves

Operating pressure of the hydraulic systemHydraulic oil cooling system

Cutting blade length Shear greasing system

Hydraulic oil tank capacity Hydraulic oil circuit total capacity


LBA = Loading boom arm (weight 2500Kg), RC = Remote control, HB = hydraulic bulk, ACC = Aautomatic compacting cycle baler + shear, P = Pre-loading, R = Radio, AG = Automatic greasing system, EE = Electric engine, WH = Hydraulic oil Webasto heating system, AC = Air conditioner, CTR = Telematic remote control.

(*) The output and bale density values may vary depending on the properties of the material treated and working conditions.




( CAYMAN 700 = 6500) CAYMAN 777 - 1000 = 6700 2460

2850

Operating characteristics Shear force

Blocking sheet force Number of cuts (empty)

Output Cars bales (*)

Profiled sheets iron (guard rail) (*)Railway track (*)

Medium - heavy materials bales (*)White goods (*)

Length of sheared material (*)Technical specification

Diesel engine Engine power


Machine structure Length of blades

Blades Conveyor blades

Hydraulic components Working pressure

Hydraulic oil filter obstruction detector Hydraulic oil minimum level detector

Cooling system Fuel tank capacity

Hydraulic oil tank capacity Electrical system

PLC Autodiagnostic

Weight Weight

Accessories no. 4 machine lifting cylinders

Automatic cycle Radio remote control

Automatic greasing system Hydraulic power plant hood

Optional: electrical motor

910 ton 110 ton

4 cycles/min

7/8 ton/h10/11 ton/h11/12 ton/h8/9 ton/h 6/7 ton/h450 mm

turbo-charged IVECO - CUMMINS230 HP / 169 Kw / 2200 Rpm

6 / 5,9 l cooling liquidWeldox® 700

900 mmreversable blades with 4 cutting edges

standardREXROTH

350 barno. 2 sensors automatic stop

radiator / hydraulic ventilation system250 l

2000 l

standard synoptic display

32 ton

optionalstandardstandardstandardstandard

170 Kw ( 400V 50Hz )

700 ton 110 ton

4 cycles/min

6/7 ton/h9/10 ton/h10/11 ton/h 7/8 ton/h 5/6 ton/h450 mm

turbo-charged IVECO - CUMMINS230 HP / 169 Kw / 2200 Rpm

6 / 5,9 l cooling liquidWeldox® 700

900 mmreversable blades with 4 cutting edges

standardREXROTH

350 barno. 2 sensors automatic stop

radiator / hydraulic ventilation system250 l

2000 l

standard synoptic display

32 ton

optionalstandardstandardstandardstandard

170 Kw ( 400V 50Hz )

(*) The output and bale density values may vary depending on the properties of the material treated and working conditions.

HORIZONTAL SHEARS

ww

w.te

cnom

edia

.biz

COLMAR S.P.A. Headquarters Via Nazionale Adriatica n.539/59345031 Arquà Polesine (RO) ITALYTel. +39 0425 93 21 33 ( Int.4 )Fax +39 0425 46 50 [email protected]

Export Sales Department:[email protected]

COLMAR USA, Inc. U.S.A.3790 Commerce Ct., Suite 100Wheatfield, New York 141201-800-537-5204Ph. 716 - 693 - 9877Fax 716 - 693 - [email protected]@[email protected]

COLMAR VOSTOK LTD RUSSIA 115088 Moscow, Yuzhnoportovaya ul.7Ph. +7 495 5189449www.colmarspa.com [email protected]

COLMAR UK Ltd. U.K.Unit 10, Wheel Forge Way Ashburton Park Ashburton Road West, Trafford Park Manchester M17 1EH Ph. 0161 848 8902Fax 0161 848 8903 [email protected]

AU

STR

AL I

AA

US

TR

IAB

ELG

IUM

BU

LGA

RIA

CA

NA

DA

CH

INA

SO

UTH

KO

RE

A

DE

NM

AR

KFIN

LAN

DFR

AN

CE

GE

RM

AN

YJA

PA

NG

RE

EC

EIN

DO

NE

SIA

I TA

LY

IRE

LAN

D

LATVIA

MA

LAYS

IAM

OR

OC

CO

HO

LLA

ND

NE

W Z

EA

LAN

D

NO

RW

AY

RO

MA

NIA

RU

SS

IAS

ING

AP

OR

ES

PA

INU

NIT

ED

KIN

GD

OM

U.S

.A.

SO

UTH

AM

ER

ICA

SW

ED

EN

TAIW

AN

TH

AI L

AN

D

Prin

ted:

04

- 20

12

GC UK 004/12 -1000Colmar reserves the right to amend the data contained within this brochure at any time.

COLMAR production ranges from industrial wheeled loaders, tracked loaders, pedestal cranes, balers,...

Documents

Transcript of COLMAR production ranges from industrial wheeled loaders, tracked loaders, pedestal cranes, balers,...