COLEMAN® C5WP Instruction Manual

Table of Contents

Introduction ................................................................................................................ 1 Key Features ............................................................................................................... 1 What’s Included .......................................................................................................... 1 Computer System Requirements ................................................................................ 1 Use Notice .................................................................................................................. 1 Quick Look at Your Camera ......................................................................................... 2 Main Icons on the LCD ................................................................................................ 2 Prepare Your Camera for Use ...................................................................................... 3 Charging the Battery ................................................................................................... 4 Starting Your Digital Camera ....................................................................................... 5 Camera Mode ............................................................................................................. 5 Video Mode ................................................................................................................ 8 Playback Mode ........................................................................................................... 9 Camera Setup ........................................................................................................... 11 Appendix A: Technical Specifications ........................................................................ 13

1

Introduction

Thank you for purchasing the Coleman® C5WP Xtreme 12MP Waterproof Digital Camera. When sealed correctly, this camera is water resistant up to 33 ft (10 meters).

Key Features

Waterproof up to 33 feet (10 meters) 12.0 Mega Pixels Maximum Resolution 2.7” LCD Screen Display Shock Resistant to 3.2 feet (1 meter) 10 Scene Modes Anti-Shake Image Stabilization Face Detection Video Recording with Sound Freezeproof up to -10 Degrees Celcius Dustproof Micro SD Expandable up to 8GB Self-Timer 16MB Internal Memory Rechargeable Lithium-Ion Battery

What’s Included

C5WP Xtreme Digital Camera USB Output Cabke Image Editing Software Lithium-Ion Battery Camera Pouch Hand Strap Instruction Manual AC Adaptor

Computer System Requirements

Pentium processor or above with Windows 2000, XP Operating System: Windows 7 / Vista / XP / Mac 10.4.9 or above CPU: Pentium III / 1GHz (minimum) / Pentium 4 / 3.0GHz or above processor (recommended) RAM: At least 256MB (minimum) / 1GB (recommended) Interface: USB available port Video Card: nVidia Geforce 7600 or ATI X 1600 or above

Note: This digital camera is plug and play compatible when used on a Mac and a PC, However, the included software can only be used with a Windows operating system only.

Use Notice Please read this manual carefully before using the camera, and pay attention to the following notice.

- Do not open the battery door while submerged in water.- Close the battery door properly for the best water-tight seal. - Ensure that the latch on the battery door is correctly closed. Ensure to press the battery door in firmly until you hear an audible click. That audible click denotes a proper waterpoof seal. - Ensure to cover the microphone hole with the attached microphone plug before submersion underwater.- Rinse with clean water after use.

2

Quick Look at Your Camera

Main Icons on the LCD

3

Prepare Your Camera for Use Install the rechargeable lithium ion battery and micro SD memory card into the appropriate slots.

Your camera supportes a micro SD memory card up to 8GB. Please refer to the diagram for correct installation.

Micro SD card direction Battery direction

4

Battery note: 1. “Low battery” will appear on the LCD when battery power is lowand your needs to be recharged. 2. Please remove the battery when you do not intend to use your camera for an extended period of time to

prevent leakage and corrosion. 3. Your digital camera will power off with the battery has been completely depleted. Micro SD memory card note: This camera supports Micro SD memory cards up to 8GB. The internal memory is for you to take one some test photos. Please insert a compatible memory card to begin using your camera.

Locate the Micro SD memory card slot, and insert the memory card until you feel and hear an audible “click”

sound. When the icon appears on the LCD screen, this indicates that your SD card is installed correctly.

1. Formatting will delete all the data on the SD memory card including protected data. 2. Do not remove the memory card during formatting as this may permanently damage the card and render it

unusable. 3. Once you download your photos/videos to your computer, you can delete the photos/videos from your

memory card in order to free up some space and continue using your camera.

Charging the Battery 1. Insert the battery into your camera.

2. Please use the supplied USB cable to connect your

camera and computer or USB charger for charging. When the battery is charging, the LED will light up.

[1] Via the computer: [2] Via the USB charger: Please follow the above illustration for charging. Notice: The specification of the charger: INPUT:100~240VAC/ OUTPUT: 5VDC. Do not use any other charger to charge your camera. Using a charger other that the one supplied will cause permament damage and will void your warranty.

5

Starting Your Digital Camera There are 3 modes on your camera.

Camera Mode: Take still photos.

Video Mode: Capture video.

Playback Mode: View, print, and edit photos and view videos. Power on Press the Power button once to turn your camera on. The LCD will light up and it will sound a “beep”. This audible alert indicates that your camera is turned on and ready for use. Power off Press the Power button once to turn your camera off. When there is insufficient battery power, your camera will automatically power off.

Camera Mode Taking Photos In the top right corner of the LCD, a counter will display the amount of pictures remaining on the memory card. When the memory (photo capacity) is full, the LCD screen will display “Memory Full”. Digital Zoom

Use the T and W buttons to adjust the zoom. The icon will show on your LCD screen. Press the T button to

zoom in on your subject. Push the W button to zoom back out. Macro Shooting

On the left side of the camera, slide the macro switch to the position until the icon appears on the

LCD screen. This indicates that macro shooting is active. Lanscape Shooting

On the left side of the camera, slide the macro switch to the position until the icon appears on the

LCD screen. This indicates that landscape shooting is active. Flash

Press the Up button until the icon is displayed on the LCD screen. This will activate the automatic flash.

Press the Up button again until the icon is diplayed on the LCD screen. This denotes that the flash function

has been "forced on" (manual flash). If the flash is not ready, an LED will illuminate and the icon will flash

repeatedly . Wait until the flash is ready before taking a photo.

Press the Up button again until the icon is diplayed on the LCD screen. The red eye reduction is active.

Press the Up button again until the icon appears. This will turn off the flash function.

Self-Timer : You can include yourself in a photo by using this feature to delay the time between pressing the shutter button and when the photo is actually taken. It is recommended that you use a tripod when using the self-timer.

1. Press the Down button to select or self timer or 3 pictures continuous shooting.

6

2. Press the shutter button to start a 2, 10 or 3 pictures continuous shooting to count down, and the photo will automatically be taken after the self-timer has run down.

Delete : 1. Press the Mode button to enter playback mode. 2. Please press Right button to enter into the menu, and press the Up/Down button to select. 3. Press OK button to confirm the selection, and press OK button again to confirm the cancellation. Or, you

may select Left button to exit. OK button

Menu: You can set photo/video quality and change other setting. Press the Menu button to enter the settings menu. Use the Up/Down buttons to select a setting. You can chose from Resolution, Scene, Image Stabilization, Quality , Sharpness , Exposure, White Balance , ISO, and Face Detection.

Resolution : 1. Enter into the MENU, and press the Up/Down buttons to

select Resolution.

2. Press the OK button, and then press the Up/Down buttons to select the resolution. 12M , 9M , 5M , 3M , 1.3M , VGA

3. After selection, please press OK button to confirm, and press Left button to exit. Or, press the MENU button to return back.

Scene : 1. Enter into the MENU, and press the Up/Down buttons to

select Scene.

2. Press the OK button, and then press the Up/Down buttons to select a scene mode, Auto, Scenery, Night Scene, Portrait, Night Portrait, Sports, Party, Beach, High Sensitivity, Underwater.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

7

Image Stabilization : 1. Enter into the MENU, and press the Up/Down buttons to

select Image Stabilization.

2. Press the OK button, and then press the Up/Down buttons to select On/Off.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Quality : 1. Enter into the MENU, and press the Up/Down buttons to

select Quality.

2. Press the OK button, and then press the Up/Down buttons to select the quality, Super Fine , Fine , Normal

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Sharpness : 1. Enter into the MENU, and press the Up/Down buttons to

select Sharpness.

2. Press the OK button, and then press the Up/Down buttons to select sharpness, Strong , Normal , Soft

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Exposure : 1. Enter into the MENU, and press the Up/Down buttons to

select Exposure.

2. Press the OK button, and then press the Up/Down buttons to select exposure,-2.0 , -5/3 , -4/3 , -1.0 , -2/3 , -1/3 , +0.0 , +1/3 , +2/3 , +1.0 , +4/3 , +5/3 , +2.0

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

White Balance : 1. Enter into the MENU, and press the Up/Down buttons to

select White Balance.

2. Press the OK button, and then press the Up/Down buttons to select white balance, Auto, Daylight, Cloudy, Tungsten, Fluorescent

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

8

ISO : 1. Enter into the MENU, and press the Up/Down buttons to

select ISO.

2. Press the OK button, and then press the Up/Down buttons to select an ISO, Auto , 50 , 100 , 200 , 400

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Face Detection : 1. Enter into the MENU, and press the Up/Down buttons to

select Face Detection.

2. Press the OK button, and then press the Up/Down buttons to select Face Detection Off / On

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Video Mode: Under Video mode, press the Menu button once to enter into the menu, and press Up/Down buttons to select a setting Resolution, White Balance, and Exposure.

Resolution: 1. Enter into Video Mode, and press the MENU button to

select Resolution.

2. Press the OK button, and then press the Up/Down buttons to select the resolution, VGA , QVGA.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

White Balance : 1. Enter into Video Mode, and press the MENU button to

select White Balance.

2. Press the OK button, and then press the Up/Down buttons to select a white balance, Auto, Daylight, Cloudy, Tungsten, Fluorescent.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

9

Exposure : 1. Enter into Video Mode, and press the MENU button to

select Exposure.

2. Press the OK button , and then press the Up/Down buttons to select the Exposure, -2.0 , -5/3 , -4/3 , -1.0 , -2/3 , -1/3 , +0.0 , +1/3 , +2/3 , +1.0 , +4/3 , +5/3 , +2.0

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Playback Mode While in Camera Mode, press the MODE button twice to enter into Playback Mode. Press the W button to enter into Photo Mode, and press the Up/Down/ Left/ Right buttons to select the photo you would like to view. After selection, press the OK button to view the photo.

When viewing the photo, you can press T Button to zoom in to the photo, and press the Up/Down/ Left/ Right button to adjust the viewing angle.

To enter into Playback settings, press the MENU button while viewing a photo. Choose from Delete , Protect , Rotate, Crop, Slide Show, and Pictbridge.

Delete :

1. Enter into Playback mode, and press MENU button to select Delete.

2. Press the OK button, and then press the Up/Down buttons to select a setting. 3. After selection, press the OK button to confirm. Press the OK button again to execute it.

OK button

10

Protect : 1. Enter into Playback mode, and press the MENU button to

select Protect.

2. Press the OK button, and then press the Up/Down buttons to select a setting.

3. After selection, press the OK button to confirm, and press Left button to exit. Or, press the MENU button to return without any selection.

Rotate : 1. Enter into Playback mode, and press the MENU button to

select Rotate.

2. Press the OK button , and then press the Up/Down buttons to select Rotate,90°, 180°, 270°, Cancel

3. After selection, press the OK button to confirm. Or, press the MENU button to return without any selection.

Crop :

1. Enter into Playback mode, and press the MENU button to select Crop.

2. Press the OK button , and then press the Up/Down buttons to select Crop. 3. Press the T/W buttons to select crop range, and press the Up/Down/Left/Right buttons to select an

area you want to crop. 4. After selection, press the OK button to confirm. Or, press the MENU button to return without any

selection

OK button

Slide Show : 1. Enter into Playback mode, and press the MENU button to

select Slide Show.

2. Press the OK button, and then the press Up/Down buttons to select 2 / 5 / 8 seconds.

3. After selection, press the OK button to confirm. Or, press the MENU button to return without any selection

11

Pictbridge : Your camera allows you to print the photos with a PictBridge enabled printer. The operation is as below: 1. After selecting a photo, press the MENU button to enter

into Playback mode, and press the Up/Down buttons to

select Pictbridge.

2. Connect your camera to a compatible printer with USB cable correctly for printing. Or, select the MENU button to return without any selection.

Camera Setup While in Camera or Video Mode, press the MENU button, and then press the Right button to enter into the settings list. Press the Up/Down buttons to select Date/Time , Auto power off , Beep sound , Language , Date Stamp , Frequency , Format , and Default Setting.

Date/Time :

Select Date/Time and press the OK button to set the date

and time. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Auto power off : 1. While in Camera or Video Mode, press the MENU and Right

buttons to select Auto Power Off.

2. Press the OK button, and then press the Up/Down buttons to select Off , 1 Minute , or 3Minutes.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Beep sound : 1. While in Camera or Video Mode, press the MENU and Right

buttons to select Beep sound.

2. Press the OK button, and then press the Up/Down buttons to select Off/On.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

12

Language : 1. While in Camera or Video Mode, press the MENU and Right

buttons to select Language.

2. Press the OK button, and then press the Up/Down buttons to select a language, English, Deutsch, Français, Español,

Italiano, Português, 日本語, 簡体中文, 繁體中文.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Date Stamp : 1. While in Camera or Video Mode, press the MENU and Right

buttons to select Date Stamp.

2. Press the OK button, and then press the Up/Down buttons to select Date/Time , Date , or off.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Frequency : 1. While in Camera or Video Mode, press the MENU and Right

buttons to select Frequency.

2. Press the OK button, and then press the Up/Down buttons to select 50 Hz or 60 Hz.

3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU button to return.

Format :

1. While in Camera or Video Mode, press the MENU and Right buttons to select Format.

2. Press the OK button, and then press the Up/Down buttons to select Internal Memory or SD Card. 3. After selection, press the OK button to confirm, and press the Left button to exit. Or, press the MENU

button to return.

OK button

Default Setting : 1. While in Camera or Video Mode, press the MENU and

Right buttons to select Default Setting .

2. Press the OK button to confirm the default settings. 3. You can press Up/Down button to select Cancel or OK.

After selection, press the OK button to confirm, and press the Left button to exit. Or, select the MENU button to return.

13

Appendix A: Technical Specifications

Image Sensor 5.0 Mega Pixels CMOS Sensor

Image Resolution 4032X3024Pixels (12M by interpolation), 3456X2580Pixels (9M by interpolation), 2560X1920Pixels (5M), 2048X1536Pixels (3M), 1280X960Pixels (1.3M), 640X480Pixels (VGA)

Video Resolution 640x480 Pixels (VGA), 320x240 Pixels (QVGA)

File Format Image JPEG

Movie AVI

PC CAM Yes

External Memory Micro SD card support upto 8GB

LCD Display 2.7 Inch TFT LCD

Lens f=8.15mm, F3.0

Zoom 8X digital zoom

Exposure -2.0, -5/3, -4/3, -1.0, -2/3, -1/3, +0.0, +1/3, +2/3, +1.0, +4/3, +5/3, +2.0

Scene Auto, Scenery, Night Scene, Portrait, Night Portrait, Sports, Party, Beach, High Sensitivity, Underwater

White Balance Auto, Daylight, Cloudy, Tungsten, Fluorescent

Image Stabilization Yes

ISO Auto , 50 , 100 , 200 , 400

Flash Auto, Force on, Force off, Red-eye reduction

Self-timer 2 or 10 sec or 3 continuous shooting

Face Detection Yes

PictBridge Yes

Interface USB 2.0 High speed

System Requirements Window 2000/XP/ Vista/Win7, Mac OS X (10.2.6 or higher)

Battery Lithium Battery

Working Temperature -10~40 ℃