Cold rolled Z-sections - Steel Piling USAsteelpilingusa.com/wp-content/uploads/2019/02/... · 89.5...
Transcript of Cold rolled Z-sections - Steel Piling USAsteelpilingusa.com/wp-content/uploads/2019/02/... · 89.5...
Section Sec.mod. Mom.of In. Width Height Thickness Weight Weight Coating 2-side
Z-type in³/ft in4/ft inch inch inch lbs/ft lb/ft² ft²/ft
cm³/m cm4/m mm mm mm kg/m kg/m² m²/m
SLZ 6-800 USA
11.9 69.4 31.50 11.81 0.236 32.6 12.7 6.30
638 9.505 800 300 6.0 48.5 62.0 1.92
SLZ 6-850 USA
12.2 81.5 33.46 13.39 0.197 28.8 10.3 6.67
656 11.160 850 340 5.0 42.8 50.4 2.03
SLZ 7-850 USA
13.3 87.8 33.36 13.39 0.236 34.5 12.4 6.66
714 12.034 850 340 6.0 51.3 60.6 2.03
SLZ 7-725 USA
13.6 78.3 28.54 11.81 0.236 30.2 12.4 5.84
730 10.727 725 300 6.0 45.0 60.4 1.78
SLZ 8-725 USA
15.7 84.2 28.54 10.67 0.276 34.9 14.7 5.79
846 11.540 725 271 7.0 52.0 71.7 1.76
SLZ 12-770 USA
23.2 156.4 30.31 13.54 0.335 48.8 19.3 6.66
1245 21430 770 344 8.5 72.6 94.0 2.03
SLZ 13-770 USA
24.2 163.2 30.31 13.54 0.354 51.1 20.3 6.59
1300 22360 770 344 9.0 76.1 99.0 2.01
SLZ 14-770 USA
25.2 170.1 30.31 13.58 0.375 53.4 21.1 6.52
1355 23300 770 345 9.5 79.5 103.0 1.99
SLZ 17-700 USA
30.9 253.4 27.56 16.46 0.315 46.4 18.8 6.73
1.661 34.706 700 418 8.0 69.1 91.7 2.05
SLZ 18-700 USA
33.5 275.9 27.56 16.54 0.354 51.4 22.3 6.62
1800 37800 700 420 9.0 76.5 109.0 2.02
SLZ 18-850 USA
33.9 313.1 33.46 18.50 0.375 60.9 21.8 7.43
1.823 42.885 850 470 9.5 90.6 106.6 2.27
SLZ 19-700 USA
34.8 287.5 27.56 16.57 0.375 53.8 23.3 6.56
1870 39380 700 421 9.5 80.0 114.0 2.00
SLZ 20-850 USA
37.2 342.1 33.46 18.50 0.394 64.5 23.1 7.48
2.000 46.862 850 470 10.0 96.0 112.9 2.28
SLZ 26-700 USA
48.4 436.0 27.56 18.11 0.480 69.1 30.1 6.57
2.600 59.720 700 460 12.2 102.9 147.0 2.00
SLZ 26-700* USA
48.6 457.9 27.56 18.90 0.433 66.4 28.9 7.00
2.613 62.732 700 480 11.0 98.8 141.0 2.13
SLZ 28-700 USA
51.3 464.4 27.56 17.32 0.520 73.9 32.2 6.49
2.760 63.620 700 440 13.2 110.0 157.0 1.98
SLZ 33-700 USA
61.0 598.7 27.56 19.74 0.473 91.7 33.4 8.10
3.285 82.929 700 500 12.0 76.7 163.0 2.45
SLZ 36-700 USA
67.0 656.6 27.56 20.47 0.492 79.7 34.7 7.87
3.600 89.668 700 520 12.5 118.6 169.4 2.40
SLZ 37-700 USA
69.0 674.6 27.56 19.65 0.492 83.7 36.4 7.76
3.710 92.415 700 499 12.5 124.5 177.8 2.37
SLZ 39-700 USA
72.6 711.8 27.56 22.05 0.531 89.4 38.9 7.68
3.905 97.500 700 560 13.5 133.0 190.0 2.34
SLZ 42-700 USA
79.8 874.6 27.56 22.05 0.551 94.1 41.0 7.79
4.288 119.802 700 560 14.0 140.0 200.0 2.38
SLZ 46-580 USA
85.6 806.4 22.83 21.26 0.591 89.4 46.9 6.91
4.600 110.465 580 540 15.0 133.0 229.0 2.11
SLZ 48-580 USA
89.5 844.5 22.83 22.44 0.610 93.8 49.3 7.02
4.810 115.690 580 570 15.5 139.6 240.7 2.14
SLZ 50-580 USA
93.4 883.8 22.83 22.83 0.630 98.6 51.8 7.15
5.020 121.070 580 580 16.0 146.8 253.0 2.18
Our cold rolled Sheet Piles
We have a wide range of cold rolled
Z-sections available. From really light
sections up to heavy sections with
section modules over 93 inch3/ft. We offer
thicknesses from 0.157” up to 0.630” and
we can roll sheet piles up to 120’ in length.
Production in accordance with EN10249
or ASTM tolerances.
Available
ASTM STEEL GRADES
A328
A572 Grade 50
A572 Grade 55
A572 Grade 60
A572 Grade 65
A690 (less corrosive steel)
Looking for a specific section?
if the project asks for very specific
dimensions and the section you are
looking for is not in the list, please contact
us and tell us your requirements so that
our engineers can work on a solution that
suits your needs.
Our sheet pile range is constantly growing and the shapes above are just a small selection of
what we can offer. If you let us know the parameters you are working with we will provide you with
the most efficient custom made shapes. Besides sheet pile we produce spiral welded pipe and
fabricated beams.
WWW.STEELPILINGUSA.COM
~ 7.09”
~ 3.545”~ 90 mm
~ 180 mm
20°
~180 mm
~55 mm* ~55 mm*
~110 mm*
~ 7.09”
~ 2.15” ~ 2.15”
~ 4.3”
20°
Cold rolled Z-sections
Our cold rolled Z-sections.