INFORMATION SERVICES

E-ma i l : s t anda rds@h in ton in fo . com

w w w. h i n t o n i n f o . c o mTEL:02-2799-3110 FAX:02-2799-5560

CODES & STANDARDS PUBLISHING

New Standards and Revised for 2015

New Standards

ASSE 1037-2015/ASME A112.1037-2015/CSA B125.37-15, Performance Requirements for Pressurized Flushing Devices for Plumbing Fix- tures, Date of Issuance of March 1, 2015

ISO/ASME 14414, Pump System Energy Assessment–, Date of Issuance of April 2015

POM 102-2014, Operating Walkdowns of Power Plants, Date of Issuance of January 21, 2015

PTC 47.4-2015, Power Block f an Integrated Gasification Combined Cycle Power Plant, Date of Issuance of December 7, 2015

Revised Standards Published

A112.19.12-2014, Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Sys- tems and Drain Waste Systems, Date of Issuance of February 13, 2015

B5.60-2014, Workholding Chucks: Jaw-Type Chucks, Date of Issuance of February 3, 2015

B18.2.2-2015, Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series), Date of Issuance of November 25, 2015

B18.8.1-2014, Clevis Pins and Cotter Pins (Inch Series), Date of Issuance of January 12, 2015

B18.15-2015, Forged Eyebolts, Date of Issuance of August 10, 2015

B18.31.3-2014, Threaded Rods (Inch Series), Date of Issuance of March 6, 2015

B18.24-2015, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products, Date of Issuance of November 20, 2015

B29.28-2015, High-Strength Chains for Power Transmission and Tension Linkages, Date of Issuance of December 10, 2015

B36.10M-2015, Welded and Seamless Wrought Steel Pipe, Date of Issuance of August 26, 2015 B89.7.2-2014, Dimensional Measurement

Planning, Date of Issuance of December 23, 2014 B107.17-2015, Gages and Mandrels for Wrench Openings, Date of Issuance of September 11,

2015

MFC-1-2014, Glossary of Terms Used in the Measurement of Fluid Flow in Pipes, Date of Issuance of August 24, 2015

MFC-21.1-2015, Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers, Date of Issu- ance of October 13, 2015

PTC 1-2015, General Instructions, Date of Issuance of October 1, 2015

PTC 22-2014, Gas Turbines, Date of Issuance of January 21, 2015

Y14.2-2014, Line Conventions and Lettering, Date of Issuance of January 26, 2015

Reaffirmation of Published Standards

A112.1.3-2000 (R2015), A112.4.3-1999 (R2015), A112.6.7-2010 (R2015), A112.6.9-2005 (R2015), A112.14.6-2010 (R2015), A112.18.8-2009 (R2014), B1.13M-2005(R2015), B1.20.5- 1991(R2014), B5.54-2005(R2015), B18.2.3.3M-2007(R2014), B36.19M-2004 (R2015), B89.3.4-

2010(R2015), B94.51M-1999(R2015), B94.52M-1999(R2015), B94.54-1999(R2015), EA-1

2009(R2014), EA-2-2009(R2015), EA-3-2009(R2014), EA-4-2010(R2015), PTC 12.2-

2010(R2015), PTC 12.5-2000(R2015), PTC 19.2-2010 (R2015), PTC 29-2005(R2015)

Withdrawal of Published Standards

B18.2.3.6M-1979 (R2006), B18.5.2.2M-1982 (R2010), B18.8.100M-2000 (R2010), B18.8.200M-2000 (R2010)