CodeBlocks-SDCC Tutorial 10-13-2013

8/10/2019 CodeBlocks-SDCC Tutorial 10-13-2013

1/19

Code Blocks/SDCC Tutorial

1 Linden McClure, Ph.D.10/13/2013


2/19

Process Flow

Download and install SDCC 2.6.0

Download and install Code Blocks 12.11

Run Code Blocks and configure project



3/19

Create a project Go to File->New->Project, select MCS51 Project, and click Go.



4/19

Create a project (cont.)

Enter the project name

Enter location of the project

Click Next

Fill in the project name and location and click Next



5/19

Create a project (cont.) Ensure Create Debug configuration is deselected to avoid warnings

Deselect Debug



6/19

Create a project (cont.) Select Large memory model

Select Large Memory Model



7/19

Project properties Right-click your project name in the Management pane and click

Properties.



8/19

Project properties (cont.) Select Build targets and then select Build options.

Select Build targets

Select Build options



9/19

Project properties (cont.) In the build options, on the Compiler settings tab, select the Policy: Use target options only.

Ensure Verbose, Intel MCS51, MCS51 large model and Output Intel Hex are selected.



10/19

Project properties (cont.)



11/19

Project properties (cont.)


Add any other desired compiler flags to the Other options tab.


12/19

Project properties (cont.) Go to the Linker settings tab.

Select Policy as Use Target options only, include the linker options, then select OK.



13/19

Build a project

To build the project right click on the Project name and select Build, or usethe icon at the top of the Code::Blocks screen.



14/19

Build a Project

Check Build messages and Build log tabs for errors.


When compiling a real source file, this output file will be multiple KB in size.


15/19

Custom Settings For changing syntax color go to Settings->Editor->Syntax highlighting



16/19

Custom Settings(cont.) Spell checker can produce an unnecessary effect for words not in the

dictionary

To remove the effect go to Settings->Editor->SpellChecker and disable

spell checker



17/19

Compiler Path Settings

Note:- The workstations in the ECEE 2B37 lab have

the correct path settings for the SDCC compiler

Note:- When using your own personal computersystem, you may need to set the correct path

variable for the SDCC compiler as shown in the

following slides



18/19

Compiler Settings

To set compiler settings go to Settings->Compiler



19/19

Compiler Settings Go to Toolchain executables and enter the path.

You can also use Auto-detect to let Code::Blocksfind the SDCC compiler in the system.


CodeBlocks-SDCC Tutorial 10-13-2013

Documents

Transcript of CodeBlocks-SDCC Tutorial 10-13-2013