Cobra™ EXM Monitor - Elkhart Brass€¦ · Cobra™ EXM Monitor Cobra™ EXM OEM Interface Module...
2
Elkhart Brass Mfg. Co., Inc. • 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250 © 2014 Elkhart Brass Mfg. Co., Inc. • www.elkhartbrass.com Cobra™ EXM Monitor Efficient, high-flow, electric remote controlled water monitor (water cannon) for fire apparatus, industrial pumper, and aerial vehicles. The COBRA™ EXM monitor is specially designed to be compact providing a greatly reduced swing radius. Unique waterway swivel joints utilize stainless steel thrust rods, and needle roller thrust bearings, for unprecedented durability in a range of applications. The COBRA™ EXM utilizes a cast vaned waterway to minimize large-scale turbulence. The monitor may be powered with 12 or 24 volts. Several base options are available for use with the COBRA™ EXM including a 3” flange, DN80-PN16 flange, 4” flange, 3” female NPT, and 3” female BSPT. The discharge may be ordered with either a 3.5” NHT or BSPP thread. The COBRA™ EXM comes standard with permanent magnet DC gear motors but may be upgraded to high power motors. Both motor options are sealed to NEMA 4. Mechanical Features: • Sealed to NEMA 4 • 1500 GPM (5678 LPM) Flow • Axially aligned thrust bearings • Absolute position sensors • Manual travel override • Teflon impregnated, hard anodized aluminum alloy waterway • High efficiency sealed planetary gearboxes Control Features: • Universal input voltage 11-27VDC • Wired or wireless communication • CAN bus J1939 compatible • Single speed, two speed, or fully proportional speed control • Programmable 3D Travel Limits, Keep-Out Zones, Travel Speeds, Stow Position, and Oscillation • Integration water valve control • Position display Cobra™ EXM Monitor Cobra™ EXM O EM Interface Module (Optional) Panel Mount Controller (Optional) Panel Mount Proportional Joystick t O Ele or OEM Sourced ectromechanica Switches Choos co e wired or mmunicati wireless on al W Monitor Dis Un Va Wireless Hand- Remote and Pa Mount Charg r Position splay CAN Enabled (Op ibody alve -held anel er N J1939 d Controller/PLC ptional)
Transcript of Cobra™ EXM Monitor - Elkhart Brass€¦ · Cobra™ EXM Monitor Cobra™ EXM OEM Interface Module...
Elkhart Brass Mfg. Co., Inc. • 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250© 2014 Elkhart Brass Mfg. Co., Inc. • www.elkhartbrass.com
Cobra™ EXM MonitorEfficient, high-flow, electric remote controlled water monitor (water cannon) for fire apparatus, industrial pumper, and aerial vehicles.
The COBRA™ EXM monitor is specially designed to be compact providing a greatly reduced swing radius. Unique waterway swivel joints utilize stainless steel thrust rods, and needle roller thrust bearings, for unprecedented durability in a range of applications. The COBRA™ EXM utilizes a cast vaned waterway to minimize large-scale turbulence. The monitor may be powered with 12 or 24 volts.
Several base options are available for use with the COBRA™ EXM including a 3” flange, DN80-PN16 flange, 4” flange, 3” female NPT, and 3” female BSPT. The discharge may be ordered with either a 3.5” NHT or BSPP thread. The COBRA™ EXM comes standard with permanent magnet DC gear motors but may be upgraded to high power motors. Both motor options are sealed to NEMA 4.
Mechanical Features: • Sealed to NEMA 4 • 1500 GPM (5678 LPM) Flow • Axially aligned thrust bearings • Absolute position sensors • Manual travel override • Teflon impregnated, hard anodized aluminum alloy waterway • High efficiency sealed planetary gearboxes
Control Features: • Universal input voltage 11-27VDC • Wired or wireless communication • CAN bus J1939 compatible • Single speed, two speed, or fully proportional speed control • Programmable 3D Travel Limits, Keep-Out Zones, Travel Speeds, Stow Position, and Oscillation • Integration water valve control • Position display
Cobra™ EXM Monitor
Cobra™ EXM
OEM Interface Module (Optional)
Panel Mount Controller (Optional)
Panel MountProportional
Joystick
t
OEleor
OEM Sourced ectromechanica
Switches
Chooscoe wired or mmunicati
wirelesson
al
W
MonitorDis
UnVa
Wireless Hand-Remote and Pa
Mount Charg
r Position splay
CANEnabled
(Op
ibody alve
-held anel er
N J1939 d Controller/PLC ptional)
Elkhart Brass Mfg. Co., Inc. • 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250© 2014 Elkhart Brass Mfg. Co., Inc. • www.elkhartbrass.com
Cobra™ EXM Monitor
The SM1500E is an electrically actuated master stream nozzles for use with the Cobra™ EXM monitor. The X-Stream series nozzles automatically adjust to maintain an effective stream and maximum reach at variable or reduced flows. Electric actuators are completely sealed and allow precise pattern control from straight stream to wide fog.
X-Stream™ Series Master Stream Nozzles
SM1500E
Model Inlet
3.5”
SPECIPressure
70 (4.83) 500-1500 (1893-5678)
IFICATIONNS PSI(BAR) FFlow Range - GPM (LPM)
SM-1500E
SPECIFICATIONSModelMax FlowMax PressureInlet
OutletTravel
Control Communication
Swing RadiusStow HeightWeight
72501500 GPM500 PSI (Limited Duty)3”-150# F, 4”-150# F, DN80-PN16 F, 3” NPT, 3” BSPT3.5” Male NHT & BSPPV: -45° to +120°H: L175° to R175°CAN bus J19392.4 Ghz digital radio frequency (unlicensed)6” (180°), 8“ (360°)16”32 Lbs.
7250 Cobra™ EXM Static Pressure Drop(3.0" Inlet and 3.5" Outlet)
Flow Rate (GPM)
50
40
30
20
10
00 200 400 600 800 1000 1200 1400 1600 1800
Pres
sure
(PS
I)
Total Static Pressure Drop
20.5
20”
28.4
61”
13.2
40”
10.468”11.980”
6.00”
