Radar/Laser DetectorModel ESD-9150

O pe rating Instru ctions for your Co b ra® 9 Band® Ext ra Se n s o ry De te ct i o n ®

No t h i n g comes close to a Co b ra™

Introduction

A1

IntroductionCongratulations! You have just purchased themost sophisticated RADAR/LASER DETECTORavailable today. This booklet contains instructionsand information designed so that you will be ableto understand how the Cobra ESD-9150 worksand how radar and (LIDAR) laser are used. Enjoyyour Cobra ESD-9150 Radar/Laser Detector anddrive safely.

Federal Law Governing Use of Radar DetectorsIt is not against Federal Law to receive radar transmissions on your COBRA Radar Detector.The Communications Act of 1934 guarantees your right to receive radio transmissions on any frequency. Local laws that contravene theCommunications Act of 1934,while illegal,maybe enforced by your local law enforcementofficials until and unless they are prohibited fromdoing so by Federal Court action.

WARNING: Before leaving your car, make surethat you conceal your radar detector. This willreduce the possibility of break-in and theft ofyour unit.

Included with your ESD-91501. Windshield Bracket2. Hook and Loop Material3. Power Cord

and Strobe Alert™Use of this product is not intend-ed to, and does not ensure thatthe motorist and any passengerwill not be involved in a trafficaccident. It is only intended t oalert the motorist that an emer -gency or service vehicle equippedwith a CODE 3,Strobe (Opticom*or Tomar Preemption System) or Cobra Safety Alert Transmitteris in the area as defined by therange of the product. Please callyour local Fire/Police departmentto verify if coverage exists in yourarea.Motorists are expected toexercise all due caution whileusing this product, and to ob-serve and follow all applicabletraffic laws. Operators ofemergency or service vehicles arealso expected to exercise all due caution while using this product,and to observe and follow allapplicable traffic laws.

*Opticom is a registered trademark of 3M Corporation

1.

2.

3.

How to Use Your Cobra ESD Radar/Laser Detector

1

Features of This Product

• 8 - point El e ct ronic Co m p a s s

• Safety Alert® Traffic Warning System

• 360º Strobe Alert™

• Separate Visual and Audio Alarms

• Signal Strength Indica to r s

• La s e r Eye® 360 ̊De te ct i o n

• VG-2 Undete ct a b l e

• Au to and Manual Muting

• 3 Level Dim Bu t to n

• Superior Audio Volume

• Adjustable Windshield Mounting Bra c ke t

ContentsIntroduction.......................................................................A1

Safety Alert®/Strobe Alert™Federal Law Governing Radar DetectorsIncluded Accessories

Controls & Indicators.....................................................A2Our Thanks to You...........................................................A3

Customer Support........................................................A3Features ..................................................................................1Installation ............................................................................2Quick Start.............................................................................5

LED Displays.......................................................................6Operation...............................................................................9

Turning On.........................................................................9Dim Button......................................................................10Highway/City Mode......................................................11Muting Mode..................................................................12Memory Set.....................................................................12

Detection .............................................................................13Calibrate the Compass................................................13Band Detection..............................................................14Audible Alarm Indicator..............................................14Radar..................................................................................15VG-2 Undetectable.......................................................16Safety Alert/Strobe Alert ............................................17Laser Detection..............................................................17Radar/VG-2/Laser Alerts..............................................18Facts About Safety Alert®/Strobe Alert™.............19Radar Frequencies.........................................................20Facts About Lidar (Laser)............................................20

Maintenance ......................................................................21Specifications ....................................................................22Limited One Year Warranty ........................................23Optional Accessories .....................................................24Order Form .........................................................................25If You Think You Need Service.................Back Cover

Thank you for purchasing the Cobra ESD-9150 Radar/Laser Detector. Properly used, this Cobraproduct will give you many years of reliable service.

Customer SupportShould you encounter any problems with the product or not understand its many features,please refer to this owner ’s manual. If, after referring to the manual, you still need help,call Cobra Customer Service at 773.889.3087.

Our Thanks to You

A3

Cobra Customer Service

Live operators are available M-F 8:00 am - 6:00 pmCentral Standard Time at:773.889.3087

Au to m a ted Te c h n i ca lAs s i s t a n ce available 24 hoursa day,s even days a we e k.E-mail questions to:p rod u ct i n fo @ co b ra . co m

Co b ra on the Wo rld Wide We b : Frequently AskedQuestions (FAQ) can be found on-line at:www.cobra.com

1 0

Controls and Indicators

A2

2

41

1. On/Off Volume Control

2. Mute Button

3. Dim Button

4. Audio Alerts Speaker

5. Highway/City Button

6. Compass DirectionIndicators

7. LaserEye®

8. Band/ Signal StrengthIndicators

9. Windshield Bra c ket M o u n t

10. 12V DC Power Jack

6

5

9

8

3

7

Installation

3

Installation

2

1 2

3 4

Attach cups tobracket.

Attach detectorto bracket.

Plug power cordinto detector.

Attach bracket towindshield.

Bend bracket forcorrect detectionangle (if needed).Do not use the ESD-9150 to bendbracket.

Plug power cord i ntoc i g a re t te lighte r.

5 6

LocationSelecting the proper location to mount the CobraESD-9150 is very important for optimumperformance. Both radar and laser transmissionspass through glass but not through other objects.For this reason the Cobra ESD-9150 lenses mustnot be blocked. It should have a view of the rearwindow to take advantage of LaserEye® 360˚detection. It is best to locate your detector as lowon the front windshield as possible.

Examples of metal in the windshield area that canblock or weaken incoming radar/laser signals:

1.Windshield wiper blades.

2. Mirrored sun screens.

3. Regular tinted glass does not affect radarreception,although the darker tint at thetop of the tinted windshield prevents laserlight from penetrating.

4. Heated windshields, currently available as an option for some Ford® (Instaclear) andGM® (Electriclear vehicles act as animpenetrable barrier to radar signals). If indoubt, check with your dealer to see if thisapplies to your vehicle.

Windshield MountingLocation WindshieldMounting

Quick Start

5

Turn On and Adjust Volume Turn On andAdjust Volume

Installation

4

Note

It will be easy for you t oremove and reinstall yourCobra ESD-9150 detector atany time using this hookand loop material on thedashboard.

Remember: Without themeans to adjust the angleof the detector (whenmounted as above), besure you that your CobraESD-9150 has a level,clearview of the road before youattach the hook and loopmaterial.

Note

Display Brightness, City/Highway, Muting, VG-2Audio Alert On/Off settingsand compass calibrationdata are retained inmemory even when unit isturned OFF or removedfrom power source.

Note

The compass must becalibrated before initial use.For more detailed instru ct i o n son compass calibration,see page 13.

Dash MountingDashMounting

Plug power cordinto detector.

Plug power cordi nto cigare t te lighte r.

Peel protectivepaper off one sideof hook and loopmaterial.

Place on dash.

Peel top paper off. Place detector onhook and loop pad.

1 2

3 4

5 6

Rotate ON-OFF Volume Control to left (awayfrom you). Three beeps will be heard and allLEDs will light up in sequence.A compass LED will remain lit to indicate theunit power is ON.

1

Quick Start

7

Set Highway/City Mode

City ModeFor urban driving–reduces number of X-Bandaudible alerts.

Set Highway/City Mode

Quick Start

6

Set Display BrightnessSelect from three levels of LED brightness for yourCobra ESD-9150 display: Bright, Dim and Dark.

Set DisplayBrightness

Highway ModeFor all other driving.

Press and release Dim button to selectDim setting. Press and release Dim buttontwice to select Dark setting. Press and release

Dim button a third time to select Bri g ht setting.

Press and release CITY button.

CITY LED will illuminate while in City mode.

1

1

Press and release CITY button again.A double beep confirms highway mode.

1

LED Displays

Note

A three level displaybrightness is provided fordusk or night driving. Formore detailed operationinstructions on set displaybrightness, see page 10.

Note

The factory default mode is Highway setting. For moredetailed ope ration instru ct i o n son set highway/city mode,see page 11.

Note

The factory default mode isBright setting.

Quick Start

8

Set Muting Mode

Auto MutingAutomatically reduces volume of alert in progressafter 4 seconds.

Set MutingMode

Operation

9

Manual MutingPress and release MUTE button to reducevolume of alert in progress.

To Switch Between ModesPress and release MUTE Button when no signal is being received, to switch from Manualto Auto Mute.

1

1

Turning On Yo u rE SD-9 1 5 0

Turning On Your ESD-9150

Plug power cordinto detector.

Plug power cord i ntoc i g a re t te lighte r.

2

ON mode

Rotate ON-OFF Volume Control to the left( away from yo u ) . Th ree power ON co n f i rm at i o nbeeps will be heard and all LEDs will light upfrom left to right in sequence.One of the compass LEDs will remain lit toindicate the unit power is ON.

Note

The factory default mode is Auto Muting. For moredetailed operationinstructions on settingmuting mode, see page 12.

Note

The compass must becalibrated before initial use.For more detailed instru ct i o n son compass calibration,see page 13.

Operation

11

Operation

10

Note

Bright = “Beep-Beep”Dim = “Beep”Dark = “Beep”

Dim ButtonYou may select from three levels of bri g htness fo ryour Co b ra ESD-9150 display: Bri g ht, Di m ,and Da rk .

Dim Button

Press and release DIM button a third time toreturn led display to Bright.A double beepconfirms normal LED brightness.

1

2

3

Press and release DIM button to reduce the LED display brightness to Dim.A single beepconfirms dim LED brightness.

Press and release DIM button again to turnLED display off. A single beep confirms no LED display.The compass LED(s) will stay on dim.

Highway/CityMode

Highway/City ModeThe Highway/City function is controlled by a 2 - s tep butto n . In the City mode, false radar alertswill be reduced.

To engage City Mode:

Note

City =“Beep”Highway =“Beep-Beep”

Note

Use City Mode in or nearcities where there are manysources of false radar signalssuch as microwave relaytowers and automatic dooropeners. This will filter outweak signals.Press and release CITY button and the

LED on the front of the unit will illuminate.A single beep confirms City mode.

1

To reactivate the Highway Mode:Press and release CITY button again.A double beep confirms Highway Mode.

CITY LEDwill illuminatewhile in CITYmode.

1

Press and release MUTE button anytime toturn off the audio alert.

Press and release MUTE button when nosignal is being received to turn Auto Mute onand off. In Auto mode, the alarm will bereduced in volume after four seconds.

Detection

13

Operation

12

Muting Mode Muting ModeThe ESD-9150 offers two Mute Modes; Auto andManual.To switch between these modes:

Note

Mute =“Beep”Auto Mute=“Beep-Beep”

1

1

Auto Mode

Manual Mode

Memory SetAutomatically remembers settings of DisplayBri g ht n e s s, Ci ty / H i g h way, Mu t i n g, VG-2 Audio Al e rtOn/Off settings and Compass calibration data.

CalibrateCompass

Memory SetYour Cobra ESD-9150 features an automaticinternal electronic memorysystem. It will automatically“remember” your settingswhen the unit is turned“OFF” or removed frompower source.

Calibrate CompassThe compass in your ESD-9150 must be calibratedbefore initial use to give accurate directions.Calibration allows the compass electronics tomeasure and store information about themagnetic fields from your vehicle.

Press City button for a minimum of 2 seconds. A single beep confirmation tone isheard and the compass directional LEDs willflash clockwise to indicate the unit is in calibration-ready mode.

NoteIf you decide to re-locateyour ESD-9150 to a differentlocation in your vehicle ormove it to another vehicle,the compass must berecalibrated.

NoteYour compass may not givea correct reading if you areinside any enclosure,building or close to a largemetal tractor trailer, truck ortrain. Your compass willwork again correctly assoon as you get away fromthese locations.There is noneed to calibrate yourcompass again.

1

Drive your car in a circle twice and then press City. Two confirmation beeps are heard

and all compass LEDs will flash twice toindicate calibration is completed. The correctcompass direction will be displayed. Thedisplay provides 8 primary directions;N,NE, E,SE, S,SW, W and NW.

2

Note

In either mode, the nextalarm will begin with normalvolume. The ESD-9150 willretain the chosen modewhile OFF.

Detection

14

Band DetectionThis dete ctor is designed to dete ct X, K ,S u pe rwide Ka Band Ra d a r, Laser (including LT I2 0 - 2 0 * ,U l t ra Ly te* and ProLaser* te c h n o l og i e s ) ,VG - 2 , Sa fe ty Al e rt and St ro be Al e rt* signals.* 3 6 0 ̊De te ct i o n

Begin BandDetection

Detection

15

RadarThe display will show the band (X,K/Ka). Thesignal strength will first be indicated by the bandbeing illuminated, then by signal strengthLEDs which increase in size as you approach theradar gun. At the same time the frequency of thebeeps will increase. Distinct tones will also begenerated for each band.

Radar

Audible Alarm SpeakerA diffe re nt alert tone will sound for X, K , Ka ,L a s e r(plus a distinctly diffe re nt tone for each of the thre elaser signals: LTI 20-20, U l t ra Ly te and Pro L a s e r ) ,VG - 2 , and Sa fe ty / St ro be Al e rt signals.

Audible AlarmSpeaker

Instant-On DetectionThe Cobra ESD-9150 is also designed to detectInstant-on speed monitoring signals. Immediateaction is required when warning is given.

Detection

17

Detection

16

LaserIndicator “W” is illuminated.

Safety Alert®

Tr a ff i cWa rn i n gSystem andStrobe Alert™

LaserDetection with360˚ LaserEye®

Note

The display does not indicate signal strength forVG-2, Safety, Strobe, andLaser alerts.

VG-2 UndetectableThe Co b ra ESD 9150 is undete ctable by po l i ce VG -2 dete ction dev i ce s. It will alert you when one is inuse near your ve h i c l e. Du ring this time, the unit isstill on full alert and able to dete ct other signals.

VG-2 Audio AlertTo turn VG-2 Audio Al e rt “O F F ”, p ress and hold theDim Bu t ton for 2 seco n d s. A single co n f i rm at i o nbeep is heard, i n d i cating the VG-2 Audio Al e rt hasbeen disabled.To turn the VG-2 Audio Al e rt “O N ”, p ress and holdthe Dim Bu t ton for 2 seconds again. A double co n f i rm ation beep is heard, i n d i cating VG-2 Au d i oAl e rt has been act i vate d.

The VG-2 LED on the front of the unit will illuminate.

VG-2 Alert

Note

Operation of the VG-2Audio Alert may be selec tedby the user.The factorydefault setting is in the“ON” position.

Note

VG-2 Audio Alert On=“Beep”VG-2 Audio Alert Off=“Beep-Beep”

Laser will trigger 3 distinct audible alerts;oneeach for LTI 20-20,Ultra Lyte and ProLaser.

Safety Alert® Traffic Warning System and Strobe Alert™Indicator “W” is illuminated whenever a signal from a Safety Alert® or Strobe Alert™ transmittersare received.

Detection

19

Detection

18

Radar/VG-2/Laser Alerts

Radar/VG-2/Laser Alerts

Type of Audible Signal Interpretation and Response

Your COBRA ESD-9150 starts to signalslowly, then increases in rate veryrapidly.

Most likely police radar.FULL ALERT.

Your COBRA ESD-9150 signals just once.

Most likely a false source, or could bepulsed radar. Exercise Caution.

Very fast signal rate instantly.

Slow signal rate as you approach hill or bridge. Sharp increase in signalrate as you reach hill or bridge.

Most likely police radar on other sideof hill or bridge. FULL ALERT.

Radar or VG-2 close by has been suddenly switched on. FULL ALERT.

Short-term, weak signaling;series of such signals.

Laser will trigger 3 distinct audiblesignals;one each for LTI 20-20,UltraLyte and ProLaser.

Use Full Caution. There are no falselaser signals.

Safety Alert and Strobe Alert havetheir own unique “EuropeanEmergency” signal.

An emergency vehicle is approaching,you are in the vicinity of a railroadcrossing, or you are approaching aroad hazard (construction site,accident scene, etc.).

Most likely a false radar sour ce.Exercise Caution.

Facts About the Safety Alert® Traffic Warning SystemFCC-approved Safety Alert Transmitters emitmicrowave radar signals to indic ate the presence of asafety-related concern. Depending on the frequency ofthese signals, as set on the transmitter, the outgoingsignal can indicate whether the transmitter is on aspeeding emergency vehicle or train,or at a stationaryroad hazard location. These microwave signals arelocated in the K-band and as a result, any radardetector which detects K-band radar will detect theseSafety signals as standard K-band radar alerts. However,unlike a standard radar detector, your Cobra ESD-9150is designed to differentiate between a standard K-bandalert and a Safety Alert warning.Safety technology is relatively new so the number oftransmitters in operation is still growing. You may notreceive Safety Alert on a daily basis and should not besurprised to encounter some emergency vehicles, roadhazards or trains not yet equipped with these transmit-ters, therefore failing to provide a signal. As SafetyTransmitters become more prevalent (the number ofoperating transmitters is growing every day),theseSafety Alerts will become more common. The SafetyAlert Transmitter is in use in all 50 states in limitedquantities.

Facts About Strobe Alert™Alerts motorists to over 50,000 emergency vehiclesequipped with strobe transmitters that activate redlights at traffic intersections in emergency high speedsituations.

Note

Strobe Alert™ is availablein over 1,000 cities andworks with Tomar andOpticom systems. Call yourlocal Fire/Policedepartment for your areacoverage or area in whichyou will be traveling.

Facts AboutSafety Alert®

Tr a ff i cWa rn i n gSystem

Detection

21

Detection

20

Radar FrequenciesThere are now three frequencies that have beenapproved by the FCC (Federal CommunicationsCommission) for use in speed monitoring equipment. They are:

X Band (10.525 GHz),K Band (24.150 GHz)Ka Band (33.400-36.000 GHz)

Your Cobra ESD-9150 can detect signals in allthree radar bands including photo radar andSTALKER radar which use the Ka band, andCobra’s Safety Alert signals on the K band.

Facts About LIDAR (Laser)What is LIDAR?LIDAR stands for Light Detection And Ranging.While everyone refers to it as LASER the correctname is LIDAR.

How does LIDAR work?LIDAR operates a lot like RADAR.Like RADAR,itspreads out. Not as quickly, but it does spread, asshown on the diagram below.

RadarFrequencies

Facts AboutLIDAR (Laser)

LIDARs must have a clearline of sight to target avehicle during the entiremeasurement interval.Intervening objects such assignposts, utility poles, treebranches, etc.,will preventa valid speed reading.

Maintenance

Facts AboutLIDAR (Laser)

Does weather have any effect on LIDAR?Yes, rain,snow, smoke, fog, and airborne dust particles will all reduce the effective range, and if sufficiently dense, may prevent its operation.

Can LIDAR operate through glass?No, LIDAR guns cannot obtain readings throughany glass. But the laser pulse can be receivedthrough glass to easily and quickly trigger a laserdetector's alarm.

Can LIDAR operate while moving?No, since LIDAR is line of sight, an officer cannotdrive, aim,and shoot while driving.

Is a LIDAR DETECTOR legal to use?Yes, it is legal in all 50 states.

MaintenanceYour COBRA ESD-9150 RADAR/LASER DETECTORwill give you years of trouble-free service withminimum maintenance.

Replacing Power Cord FuseUnscrew cap of cigarette lighter adapter andremove fuse. Replace with 1-ampere fuse only.

TroubleshootingIf your COBRA LASER DETECTOR ESD-9150 isn’toperating, we suggest you make the followingchecks:1. Is the power cord properly connected?2. Is the fuse OK?3. Is the cigarette lighter socket clean and free

from corrosion?

Limited One Year Warranty

23

Specifications

22

GENERAL SPECIFICATIONS

A.FREQUENCIES

1. X BAND 10.525 GHz ± 50 MHz

2. K BAND 24.150 GHz ± 100 MHz

3. Ka BAND 33.4 - 36.0 GHz

4. VG-2 11.4 GHz - 11.7 GHz

5. Safety Alert 24.07,24.11,24.19 GHz

6. LTI 20-20 Laser 300 THz - 375 THz

7. Strobe Alert 300 THz - 770 THz

8. Ultra Lyte Laser 300 THz - 375 THz

9. ProLaser 300 THz - 375 THz

B. UNIT DIMENSIONS

3.25”W x 1.375”H x 5”D

Specifications COBRA ELECTRONICS CORPORATION warrants that itsCOBRA 9 Band Radar/Laser Detectors, and the componentparts thereof, will be free of defects in workmanship andmaterials for period of one (1) year from the date of firstconsumer purchase. This warranty may be enforced by thefirst consumer purchaser, provided that the product isutilized within the U.S.A.

COBRA will,without charge, repair or replace, at its option,defective 9 Band Radar/Laser Detectors, products or com-ponent parts upon delivery to the COBRA factory ServiceDepartment, accompanied by proof of the date of firstconsumer purchase, such as a duplicated copy of a salesreceipt.

You must pay any initial shipping charges required to shipthe product for warranty service, but the return chargeswill be at Cobra's expense, if the product is repaired orreplaced under warranty.

Exclusions: This limited warranty does not apply; 1) to anyproduct damaged by accident;2) in the event of misuse orabuse of the product or as a result of unauthorizedalterations or repairs;3) if the serial number has beenaltered, defaced or removed;4) if the owner of the productresides outside the U.S.A.

All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty.

COBRA shall not be liable for any incidental, conse-quential or other damages;including, without limita-tion, damages resulting from loss of use or cost of i n s t a l l at i o n .

Some states do not allow limitations on how long animplied warranty lasts and/or do not allow the exclu-sion or limitation of incidental or consequential dam-ages, so the above limitations may not apply to you.

Cobra ElectronicsCorporation

6500 West Cortland StreetChicago, Illinois 60707www.cobra.com

Optional Accessories

24

Accessory Order Form

25

You Can Find These Fine Accessories At Your LocalCobra DealerIf you wish, you can order directly from Cobra.

Order by phoneCall 773.889.3087 (Press 1 from the main menu) 8 a.m.-6 p.m., Monday through Friday, Central Standard Time.

Order by mail or faxCall 773.889.3087 for pricing. Fill out order form on next page,and mail/fax directly to Cobra.

Windshield Mounting Bra c ke t

Includes suction cups5 4 5 - 1 3 9 - N - 0 0 1

S t raight 12V DC Power Co rd

Includes plug and fuse4 2 0 - 0 8 0 - N - 0 0 1

Curled 12V DC Power Co rd

Includes plug and fuse4 2 0 - 0 8 0 - N - 0 0 2

Subtotal(Tax if applicable) Shipping/handling $4.00

Total

Tax TableIllinois residents add 8.75% Indiana residents add 5%Michigan residents add 6 % Ohio residents add 6%Wisconsin residents add 5%

Prices subject to change without notic e.

420-080-N-001 St ra i g ht 12V Power Co rd

4 2 0 - 0 8 0 - N - 0 0 2 Cu rled 12V Power Co rd

5 4 5 - 1 3 9 - N - 0 0 1 Windshield Mo u nting Bra c ke t

Item # Description Cost Ea. Qty. Amount

Please print clearly

Name

Address (No P.O. Box)

City State

Zip

Telephone ( )

Credit Card No. Exp. Date

Customer Signature

Circle One: Visa MasterCard Discover

Al l ow 2 to 3 weeks for delive ry. Of fer valid in Continental U.S. o n ly.

For credit card orders fill out order for mand fax to: 773.622.2269or call 773.889.3087(Press 1 from the main menu)8:00 am - 6:00 pm,M-F, CST.

Ma ke check or money order (no stamps)payable to:Cobra Electronics6500 West Co rtland St re e tCh i ca g o, IL 60707At t n : Ac ce s s o ries De p t .

The Co b ra line of quality prod u cts also includes:

• Ci t i zens Band Ra d i o s

• m i c ro TALK® Ra d i o s

• Ra d a r / Laser De te cto r s

• G P S

• Sa fe ty Al e rt®Traffic Wa rning Sys te m s

• Ac ce s s o ri e s

• H i g h Ge ar™ Ac ce s s o ri e s

No t h i n g comes close to a Co b ra™

EDS-9150 is cove red by one or more of the fo l l owing U.S. p a te n t s.Additional patents may be listed inside the prod u ct or pe n d i n g.5 , 4 9 7 , 1 4 8 ;5 , 5 9 4 , 4 3 2 ;5 , 6 1 2 , 6 8 5 ;6 , 0 7 8 , 2 7 9 ;6 , 0 9 4 , 1 4 8

© 2000 Cobra Electronics CorporationPrinted in Korea

Part No. 480-001-P

For te c h n i cal assistance, please call our Au to m a ted Help Desk which can assist

you by answering the most fre q u e n t ly asked questions about Co b ra prod u ct s.

(773) 889-3087 24 hours a day, 7 days a week.

A Consumer Service Representative can be reached through this same number 8:00 am - 6:00 pm,Monday through Friday, Central Standard Time

Technical assistance is also available on-line in the Frequently Asked Questions (FAQ) section atwww.cobra.com or by e-mail to productinfo@cobra.com

If you think you need service call 773.889.3087

“If your product should require factory service please call Cobra first before sending your unit in.This will ensure the fastest turn-around time on your repair.”You may be asked to send your unit to the Cobra factory. It will be necessary to furnish thefollowing in order to have the product serviced and returned.1. For Warranty Repair include some form of pr oof-of-purchase, such as a mechanical reproduction

or carbon or a sales receipt. If you send the original receipt it cannot be returned.

2. Send the entire product.

3. Enclose a description of what is happening with the unit.Include a typed or clearly print nameand address of where the unit is to be returned.

4. Pack unit securely to prevent damage in transit. If possible, use the original packing material.

5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or FirstClass Mail to: Cobra Factory Service, Cobra Electronics Corporation,6500 West Cortland Street,Chicago, IL 60707.

6. If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchangeddepending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 773.889.3087 forassistance.

If You Think You Need Service

© 2000 Cobra Electronics Corporation6500 West Cortland StreetChicago, IL 60707www.cobra.com