COATINGS fOr MeTAl ClAddING -

Click here to load reader

  • date post

    03-Feb-2022
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of COATINGS fOr MeTAl ClAddING -

10A05 Goosewing Grey
12B21 Moorland Green
08B29 Vandyke Brown
Metal cladding (r)evolution Enhance, beaut i fy, protect and refurbish your cladding
Why paint? Improve the lifetime of the cladding by at least another 10 years
Much more cost effective than replacement
Minimal disturbance of the business processes
Protect against atmospheric, chemical and mechanical deterioration
Fully utilize the communication role of the building





advantages: it is a versatile and economic building method.
The light weight building materials enable a space-effective
construction with minimal maintenance.
Over the last forty years cladding has become the material
of choice for many commercial buildings. And while the
durability of the latest generation cladding has improved,
sooner or later you will face the choice to reclad or refinish
your building.
Thin precoated coils are profiled into the right shape for cladding.
A cladding sheet is typical a millimeter thick and
contains a coating of
the building in perfect
Verftechnisch advies 2 BouwdeelDeuren.
Bestaande afwerkingFabrieksmatig gespoten.
Conditie De ondergrond verkeert in een zeer slechte conditie, de coating is totaal versleten en
op diverse plaatsen is de coating verdwenen en is de zinklaag zichtbaar.
De hechting van deze coating is slecht.
Belasting C3
VoorbehandelingReinig en ontvet zorgvuldig met een 5% oplossing van ND 14 in water.
- Laat 15 tot 30 minuten inwerken, maar niet laten opdrogen.
- Naspoelen met overvloedig vers warm water of stoomreiniging om alle restanten te
verwijderen.Verwijder alle restanten water en laat het oppervlak volledig drogen.
- Slecht hechtende delen verwijderen d.m.v. roterend schuren.
- Zinkzouten verwijderen in combinatie van ND-14 en scotch-Brite
let the building do the talking A picture says more than thousand words. Any choice of colour can be
pre-visualized by our colour advise software. So you know exactly what the
end result would be. To make the best choice of colour and support your
communication about the refurbishment project.
Quality guaranteed 10 years warranty is available on our systems. And if required even fully insured.
environmental concerns? Not with our range of unique, waterbased, environmentally friendly
anti-corrosion coatings, virtually without solvents.
Metal cladding coating solutions
free advice and complete solutions Based on a free site visit without any further obligation we specify
the best coating solution for your needs. And can advis0e you
on coatings for all aspects of building maintenance: supporting
structures, roofs, roof lights, flashings, interior paneling, fixtures, and
piping.
No disruption Disruption of your activities can cause significant, but often hidden, costs. Our
refurbishment systems cause minimal disturbance, whether applied inside or
outside. We offer virtually odour free systems, without dusty and noisy surface
preparation. And without the notorious spray dust damage.
free specification
Planning




Best solutions Metal claddings and building structures offer many challenges. We have decades of experience with their refurbishment. Whether
you require a decorative house-style change or refurbishment of your failing cladding coating, we can offer the solution that is best for
you. But it’s more than products. It is our expertise and service that makes Rust-Oleum Mathys stand out.
Colour study in Moorland Geen. Colour shown with permission of Corus.
The best coating solution for your cladding
Unique rust preventive coatings, single component and really easy to apply. Noxyde is based on unique water-based elastomeric technology. The anticorrosion and waterproofing properties guarantee the best protection as proven over many years.
The permanent elasticity prevents cracks caused by thermal movement of the metal sheets. The 1K waterborne technology enables easy, effective and environmentally friendly
application with a great result. Noxyde has a phenomenal track record of more than 30 years and its unique performance is confirmed by many test institutions.
NOxYDe
NOxYDe
Feature Benefit
Extreme elasticity No cracking or peeling
Superb adhesion For all kinds of surfaces (incl. Plastisol, PVF2, etc.)
Minimal surface preparation Saves time and money
Excellent edge coverage Seals cut edges, joints and screws, eradicates edge corrosion
lowest overall costs Very long lifetime (15 to 20 years)
Primer and topcoat in one
Very limited surface preparation
The best coating solution for your cladding
Unique rust preventive coatings, single component and really easy to apply. Noxyde is based on unique water-based elastomeric technology. The anticorrosion and waterproofing properties guarantee the best protection as proven over many years.
The permanent elasticity prevents cracks caused by thermal movement of the metal sheets. The 1K waterborne technology enables easy, effective and environmentally friendly
application with a great result. Noxyde has a phenomenal track record of more than 30 years and its unique performance is confirmed by many test institutions.
Top in heavy duty protection
Exceptionally heavy-duty






Excellent flow and appearance
Water based, single pack,
Waterbased





Solvent based, single pack,
Can also be applied on slightly moist
surfaces
Product X
14
12
10
8
6
4
2
0
Coating solutions for all types of cladding
Noxydizing makes cladding renovation easy. For all kinds of surfaces (inc. Plastisol, PVF2, etc.)
For internal and external use
Typical cladding colours promptly available from stock
Virtually any colour available on request
Excellent for edge lap treatment, eradicates future corrosion





Project costs and product life time costs The cost of the actual coating system is often less than 20% of the total project costs, while the coating system
determines to a great extent the durability of your system. Choosing for Noxydation to recoat your cladding results in a
longer life span of your coating system and therefore lower annual costs.
Fig.2 Noxydizing results in lower annual costs.
Annual costs
Life span
Rust-Oleum Mathys offers complete solutions for building
maintenance. To be able to support you with any coating problem,
we offer a wide range of paints and coatings.
Waterproofing products for roofs For renovation of both metal and bituminous roofs we offer a range of liquid applied waterproofing coatings,
both waterborne and solvent based, for flat or pitched roofs.
Special primers for difficult areas Rust-Oleum Mathys offers a range of problem solving primers. For all
types of substrates or conditions, also for notoriously difficult ones like
bitumen or powder coated.
Bring beauty with topcoats Topcoats can be used, enhance your building, let your building be
an advert to your business.
Tintable in virtually any colour
directly on cladding
Systems for any situation
Choosing the right coating system depends on numerous factors like the state of the building, type of cladding, exposure
conditions, specific requirements, etc. Our people have the experience and skills to make tailored system specifications.
Based on a free site visit without any further obligation we can offer a technical advice that will suit your needs.
Please contact your Rust-Oleum Mathys representative for more information.
These guidelines are provided for information purposes only. Since the manufacturer is unable to exercise any control over the correct application and processing of the products, he cannot accept any responsibility for this.
Standard colours (other colours on request)
Other colours available on request (RAL, BS, etc.)
Pegarust only in colours 10, 20 and 30.
These colours are printed: slight colour differnces are possible.
Used with kind permission of Corus. Moorland Green is a recognised colour name associated with




10A05 Goosewing Grey
12B21 Moorland Green
08B29 Vandyke Brown
Rust-Oleum Netherlands B.V. P.O. Box 138 4700 AC Roosendaal The Netherlands T: +31 (0) 165 593 636 F: +31 (0) 165 593 600
[email protected] www.ro-m.com
Rust-Oleum UK Ltd. Unit 6, Spitfire Close Coventry Business Park Coventry, CV5 6UR United Kingdom T +44 (0)2476 717 329 F +44 (0)2476 718 930
[email protected] www.ro-m.com
Rust-Oleum France S.A.S. 11, rue Jules Verne - B.P. 60039 95322 St-Leu-La-Forêt Cedex France T: +33 (0) 130 40 00 44 F: +33 (0) 130 40 99 80
[email protected] www.ro-m.com
Rust-Oleum Mathys Italia s.r.l. Largo Donegani 2 20121 Milan Italy T: +39 335 10 93 482
[email protected] www.ro-m.com
N.V. Martin Mathys S.A. Kolenbergstraat 23 3545 Zelem Belgium T: +32 (0) 13 460 200 F: +32 (0) 13 460 201
[email protected] www.ro-m.com