Coalescer unit

2
Fluids Services COALESCER UNIT FACT SHEET Coalescer Unit The Pall filter coalescer separator is an ideal produced water treating technology for application on platforms where power is not available to operate induced gas flotation machines or other devices that require electrical power. Pall high-efficiency coalescers merge small droplets of liquid into larger droplets by passing the fluid through several layers of filter media, each with progressively larger pores. As droplets compete for the open pores they coalesce, forming larger droplets, which are then more easily separated. The skid design consists of Two (2) pre-filters, Two (2) Pall PhaseSep coalescers and all on skid piping and controls necessary for the equipment to automatically operate safely and efficiently with only periodic personnel aention. tervita.com

Transcript of Coalescer unit

Fluids Services

COALESCER UNITFACT SHEET

Coalescer UnitThe Pall fi lter coalescer separator is an ideal produced water treating technology for application on platforms where power is not available to operate induced gas fl otation machines or other devices that require electrical power. Pall high-effi ciency coalescers merge small droplets of liquid into larger droplets by passing the fl uid through several layers of fi lter media, each with progressively larger pores. As droplets compete for the open pores they coalesce, forming larger droplets, which are then more easily separated. The skid design consists of Two (2) pre-fi lters, Two (2) Pall PhaseSep coalescers and all on skid piping and controls necessary for the equipment to automatically operate safely and effi ciently with only periodic personnel att ention.

tervita.com

Advantages• No Power Requirements

• 5,000 Barrel per Day Nominal Flow Capability

Fluids Services COALESCER UNIT

SPECIFICATIONS COALESCER

A x B x C (ft) 12’ x 8’ 6” x 10’

Weight (dry) 10,000 lbs

Weight (flooded) 12,000 lbs

Capacity (Bpd) 5,000

Pressure Rating (PSI) 150 PSIG @ 120˚ F

Instrumentation PSV, LG, LC, LSH, LSL, SDV, LCV, PI, PCV

Features Pre-Filter

Power Requirements None

Asme Code Sec VIII Div. 1 and Asme “U” Stamp

Canada Operations500, 140–10 Ave. S.E.Calgary, AB T2G 0R1T: (403) 233-7565F: (403) 261-5612

US Operations363 N. Sam Houston Parkway, Suite 330Houston, TX 77060T: (832) 399-4500F: (832) 627-7764