CNGL Inc. Brochure.pdf · 1. Project Quality Control and Assurance 2. Supplier Quality Surveillance...
Transcript of CNGL Inc. Brochure.pdf · 1. Project Quality Control and Assurance 2. Supplier Quality Surveillance...
FIELD CONSTRUCTION FIELD CONSTRUCTION COMMISSIONING, COMMISSIONING,
TURNAROUND TURNAROUND TECHNICAL SERVICETECHNICAL SERVICE
FIELD CONSTRUCTION COMMISSIONING,
TURNAROUND TECHNICAL SERVICE
13 TECHNICAL RESOURCE SERVICES
12 MULTIDISCIPLINE CAD DESIGN SERVICESü 2D drawing, conversion of 2D drawings to 3D modelingü Drafting service for projects, management of change (MOC's), preliminary design, regulatory complianceü As-Built field redline mark-ups after major construction or turnaround.ü Re-draft or conversion of vendor drawings , which are never submitted as native filesü Assessment of asset drawings and engineering records ü Field Redlining to capture plant changes
3D LASER SCANNING FOR AS-BUILT, 3D MODELING; HIGH
DEFINITION SURVEY It is a constant concern for plant / asset operators and owners of
large facilities to minimize operational shutdowns mitigate risks.
Our 3D laser scanning services help capture complete as-built field
construction data without causing disruption. CNGL designers are
specialized in providing services and solutions to capture, model
and manage as-built plant information. By combining leading-edge
3D data capture, 3D modeling and 3D data management technology
and solutions with trained professional personnel, we can offer our
clients accurate and updated plant information for their capital
projects and plant life cycle
8. Commissioning Coordination
9. Document Control and
Management
10. Turnaround Support
11. Field Project Controls
12. Multidiscipline CAD Design Services
(Redlining and As-Building,
3D Laser Scanning)
13. Technical Resource Services
1. Project Quality Control and Assurance
2. Supplier Quality Surveillance (SQS )
and Inspection Services
3. Plant Integrity Inspection
4. Materials Management
5. Field Engineering
6. Field MOC Coordination
7. Mechanical Completion and Turnover Management
CNGL Inc.CNGL Inc.Our vision is your success
FIELD CONSTRUCTION FIELD CONSTRUCTION COMMISSIONING, COMMISSIONING,
TURNAROUND TURNAROUND TECHNICAL SERVICETECHNICAL SERVICE
FIELD CONSTRUCTION COMMISSIONING,
TURNAROUND TECHNICAL SERVICE
CNGL is a dynamic and integrated Canadian Engineering
House providing services in Alberta, British Columbia and
Saskatchewan. We provide complete spectrum of
engineering services to Oil and Gas, Utilities, Infrastructure,
Fertilizer, Food and Beverages Industries. We have been
successfully providing engineering solutions in the complex
projects through our Value Improvement Practice and with
the dedication of our trained team.Our quality and
competitive price is maintained due to our business model
of“High efficiency, Fit for purpose Service, Quick
Understanding and Negligible Overhead”.
CNGL SERVICES
v Engineering Design
- Process
- Mechanical (Static, Rotating, Piping, HVAC)
- Piping
- Electrical
- Instrumentation & Controls
- Civil, Structural, Geotechnical
- CAD Services
v Process Safety Management (PHA - HAZOP Facilitation)
v Specialized Electrical, Instrument and Control
System - Technical Services
v Field Construction, Commissioning, Turnaround -
Technical Services
v Reliability and Maintenance Services
v Project QA/QC and Integrity Inspection Services
v Specialized Process Engineering Services
(Feasibility Study, Capacity Optimization
and Energy Audits)
v Environmental Services
v Project Management
In any organization, it is important that the right personnel with necessary qualification and specific experience are assigned to the right jobs so that they can perform their tasks efficiently and effectively. Finding the right fit can sometimes be a challenge, especially when client is busy and on a time sensitive mode. We always bridge this gap. CNGL has various workforce management solutions, provides talented, efficient and right technical resources for the right job to our clients on “As required basis”. Our technical resources for field construction includes but not limited to
ü Field Engineersü Material Management Personnelü Project Control personnelü QA/QC Inspectors (Mechanical, Process Piping, E&I, Civil, Structural) ü Welding Inspectorsü Third Party Inspectors for Vendor Inspectionü Turnover Coordinators ü Document Control Specialists
CALGARY
Sun life Plaza, West Tower,
Suite 1600, 144-4 Ave, SW, Calgary, AB, T2P 3N4
VANCOUVER
Suite 1500, 885 West Georgia St., Vancouver V6C 3E8
[email protected] 403-993-1528 www.cngl.ca
CNGL Inc.CNGL Inc.Our vision is your success
01 PROJECT QUALITY CONTROL AND ASSURANCE
05 FIELD ENGINEERING08 COMMISSIONING COORDINATION
02 SUPPLIER QUALITY SURVEILLANCE (SQS)
Following its corporate QMS (Doc. CNGL-QMS-1.01 Rev.1),
CNGL offers the Quality Control and Assurance service that
covers the full cycle of project management that includes
Engineering, Procurement & Construction Quality Assurance.
CONTROL OF ENGINEERING DESIGN
AND DEVELOPMENT:
Engineering Surveillance, Includes :
ü Project Orientation and Training
ü Squad Check Reviews
ü Specification Deviations
ü Request for Information (RFI) Trends
ü Project Quality Plan
ü Procedural Audits & Technical Audits
v CONSTRUCTION QUALITY ASSURANCE (ALL DISCIPLINES):
ü Early construction surveillance planning
ü Project Quality planning for construction surveillance
ü Organization review of the selected contractor to
determine effectiveness
ü Inspection Test Plan (ITP) review and implement witness
and hold points
ü Construction surveillance for the conformance of:
I. Construction progress with respect to the scope of work, ITP
II. Welding controls and welding procedure application
III. Materials and material controls (inspection and preservation)
IV. Progress of QA/QC records and NDE requirements
V. Calibration of inspection & testing equipment
VI. Construction Turnover deliverables
ü Vendor capability assessment
ü Supplier Quality Surveillance (SQS)
ü Verification of purchased products and services
ü Third Party Inspection Service (Vendor shop Inspection)
ü Factory Acceptance Test (FAT)
ü Pre-shipment inspection
ü Loading supervision
ü Vendor audit and performance review
06 FIELD MOC COORDINATION
07 MECHANICAL COMPLETION & TURNOVER MANAGEMENT
CNGL Field coordinators effectively manages the MOC process
associated with the technical changes in the IFC documents in a
timely manner in order to maintain Construction schedule and
thereby control the cost in any project.
ü Deviation from standards
ü Request For Information (RFI)
ü Field Change Notice (FCN)
ü Engineering Change Notice (ECN)
ü Project Change Notice (PCN)
CNGL provides Mechanical Completion, Turnover and Project
Close out services. Our Turnover representative verifies:
ü The construction testing
ü All prescribed turnover documents are complete and have
been submitted to the respective client
ü All Non-Conformances are identified and a management
agreed mitigation plan is in place
ü Planningü Pre-commissioningü Punch list coordinationü Commissioningü Documentationü Permit-to-work (PTW) coordination ü Post Commissioningü Start up
03 PLANT INTEGRITY INSPECTION
Every process plants are expected to maintain a high standard of quality control and quality assurance throughout their operations in order to ensure optimum plant operations, reliability and maintenance excellence. There is always a need to create a balance between revenue and operating cost maintaining the highest level of safety and quality standards. That’s why it is a prime importance to constantly and periodically conduct integrity inspections. We represent our client on-site, manage the complete integrity inspection activity engaging NDT contractors, and ensure that the work is performed per specifications, in a safe manner.
ü On stream , off stream inspection (API 510, 570 & 653) ü Fitness-for-Service Assessments (API 579) ü Validation of inspection data ü Review of inspection methodology ü Failure Mode and Effect Analysis (FMEA) and prevention ü Identification of plant risk, technical risk and reliability management ü Corrosion surveys, audits and corrosion management implementationü Corrosion monitoring; implementation of corrosion coupons / probes exposure programü Review of chemical Injection, chemical injection availability report priorities and technical procedures ü Pressure equipment, used machinery certificationü Provide inspectors for pressure vessel, tank, piping, pipeline, welding, coating, materials, API653, electrical
04 MATERIALS MANAGEMENT
ü Material receiving inspection
ü Storage, handling and preservation
ü Material release process that documents
the condition of material distributed
ü Identification and traceability management
ü Evaluation of the contractor’s construction
planning and scheduling
ü Verification of all the vendor-supplied or
prefabricated equipment
ü Check for safety issues and construction issues
ü Provide engineering information
(plans, drawings, data sheets)
ü Lead the resolution of FCN and manage the RFI log,
Risk Assessment, MOC
ü Review the discipline-engineering packages for
completeness.
ü Monitor the construction work for conformance with
Engineering Work Package(EWP), Applicable codes,
standards and specifications.
ü Resolve NCR’s, CAR’s, Support start-up planning, field
punch outs, systems turnover etc
09 DOCUMENT CONTROL AND MANAGEMET
ü Project Communication, Interface Coordination, Document
Distribution Matrix
ü Project Services and Non Engineering Record Management
ü Governing Documents, Approved Document
Management Standards
ü Vendor Data Control
ü As-Built Drawings, 3D Model As-Building
ü Project Closeout, Engineering Provider Turnover
ü Historical Report, Lessons Learned
ü Document Management Tools
(Document Transmittal software)
ü Project filing Share drive, Data Management
ü Training
10 TURNAROUND SUPPORT
ü Support to Operation
ü Support to Turn Around Management
ü Inspection and technical assistance
ü Support to Engineering Team
ü Support to Construction
11 FIELD PROJECT CONTROL
CNGL Field Project Controls service supports the client's
project and construction management team in attaining the
schedule and cost targets
ü Planning / Scheduling / Progress
ü Cost
ü Estimating
ü Management of Change
ü Project Control Tools and coding structure
ü Cost Control for Construction Management & Construction
ü Progress and Performance Monitoring; Management
Reporting
ü Risk Management