O: (702) 876-7530 F: (702) 876-5106 lawyertranelv.net 3036 S ...
CMYK System for Combination Wood/Metal & All-metal … Door Rail Technical.pdfUSA 800-558-5895 Fax...
2
Transcript of CMYK System for Combination Wood/Metal & All-metal … Door Rail Technical.pdfUSA 800-558-5895 Fax...
USA800-558-5895
Fax 800-257-5926
INTERNATIONAL920-876-3611
Fax 920-876-3527
Elkhart Lake, Wisconsin 53020 Distributed by:
SDR1104
System for CombinationWood/Metal &
All-metal FramedSlide Doors
• Pre-finished white aluminum verticals• Steel box girts• All-metal guide systems
31/2" system 11/2" systemSDR1635BV31/2" BOX VERTICAL
Built-in box extrusiongives best strength toweight ratio.Triple “J” Trimaccepts vertically allmetal heights.“J” for flat-cut metalextended and raisedto allow easy insertionof sheet and concealsirregular cut.Optional weather stripavailable.Back designed not tocatch on jamb trimwhile opening orclosing door.Available 9, 10, 11,12,14, 15, 16, 18 & 20foot lengths.
• • • • • •
• • •
• • •
•
• • • •
• •
• • • •
• • •
• • •
• • • • •
• • • •
• • • •
• • • •
• • • •
SDR1600AVVERTICAL RAIL
High nail/screwgroove protectsjamb.Wide nail/screwgroove allowsnailing withoutdamaging vertical.Optional vinylweather strip wipesagainst jamb to sealopening.Designed to alloweasier insertion ofgirts.Available 8, 9, 10,11,12, 13, 14, 15, 16,and 18 foot heights.
SDR1600HC “H”CLOSURE
Simplifies stock.Closes gap betweenand strengthenscenter of doubledoors.Positive weather sealof door center withoptional weatherstrip.Available 10, 12, 14& 16 foot heights.
SDR1635BG11/2" x 31/2" BOX GIRT
Lock seam tube forbest economy,strength and weight.20 gauge steel, G90galvanized.Available in 10, 11, 12,13'6", 14, 15, 16, 18,20, 24 foot lengths.
SDR1600ABALUMINUMBOTTOM RAIL
Trims bottom ofdoor.Use with door roller.10, 12, 14, 16 & 20 footlengths - can be spliced.
SDR1600WB BOTTOM RAILContinuous nail flange can be cut anylength.Designed with 11/4" up/down play tocompensate for seasonal changes indoor and building.Dual purpose - Use on wood doors(illus. A). Use on metal doors (illus. B).Nail to wood bottom rail or screw toaluminum vertical rail.10', 12', 14', 16', 18' &20' lengthshelp when door opening is full foot wide.
SDR1600HV “H”VERTICAL RAIL
Economy ofincluding “H” onstandard vertical.Mates with standardvertical to holddouble doorstogether.Positive weather sealof door center withoptional weatherstrip.Available 10, 12, 1416 and 18 foot heights.
SDR1635BG31/2" x 11/2" BOX GIRT
Lock seam tubefor best economy,strength, andweight.20 gauge steelG90 galvanized.Available in 10, 11,12, 13'6",14, 15, 16, 18, 20, 24 footlengths.
SDR1635BBWHITE ALUMINUM31/2" BOXBOTTOM RAIL
(10', 12', 13'6", 14'15', 16', 18', 20', 24')Mates w/SDR1635BV tocomplete an all-white31/2" application.
SDR1635BCBOX VERTICALCLOSURE
Designed to close thegap between thecenter of doubledoors.16' lengths only.
SDR1635BR BOTTOM RAILDual purpose - attaches towood or steel girt.18 gauge steel.Bottom rail channel matesw/guide rail system.Available 8', 10', 12' lengths.
SDR1601CG CENTER GUIDESDR1600 WSWEATHER STRIPPING
GUIDE RAIL SYSTEM OPTIONS
Heavy galvanized steel.Attaches on stub post or incement in center of splitdoors & large singles.Removable stop prevents doorfrom rolling past center.Mates w/SDR1635BR bottomrail for 31/2" system &SDR 1600WB bottom rail for11/2" system.
Optional vinylweather strip sealsentire vertical tojamb.
See catalog sheet for track,trolley & hardwareproducts.
SDR0500GZ-5'SDR1000GZ-10'
Heavy galvanized steel.5' & 10' lengths - use lengthor lengths equal to 1/3 - 1/2the door panel width or moreif desired.Bracket mounting holelocated to allow lead in whendoor is closed and to aid ininstallation over metal orother obstruction.Holds door down and in.
Designed to provide easy adjustment by building crew oruser.Provides large amount ofadjustment.
GUIDE RAIL
Note: Guide System is designedto give 41/4" of in/out and 21/4" ofup/down adjustment.
A B
CMYK
USA800-558-5895
Fax 800-257-5926
INTERNATIONAL920-876-3611
Fax 920-876-3527
Elkhart Lake, Wisconsin 53020 Distributed by:
SDR1104
System for CombinationWood/Metal &
All-metal FramedSlide Doors
• Pre-finished white aluminum verticals• Steel box girts• All-metal guide systems
31/2" system 11/2" systemSDR1635BV31/2" BOX VERTICAL
Built-in box extrusiongives best strength toweight ratio.Triple “J” Trimaccepts vertically allmetal heights.“J” for flat-cut metalextended and raisedto allow easy insertionof sheet and concealsirregular cut.Optional weather stripavailable.Back designed not tocatch on jamb trimwhile opening orclosing door.Available 9, 10, 11,12,14, 15, 16, 18 & 20foot lengths.
• • • • • •
• • •
• • •
•
• • • •
• •
• • • •
• • •
• • •
• • • • •
• • • •
• • • •
• • • •
• • • •
SDR1600AVVERTICAL RAIL
High nail/screwgroove protectsjamb.Wide nail/screwgroove allowsnailing withoutdamaging vertical.Optional vinylweather strip wipesagainst jamb to sealopening.Designed to alloweasier insertion ofgirts.Available 8, 9, 10,11,12, 13, 14, 15, 16,and 18 foot heights.
SDR1600HC “H”CLOSURE
Simplifies stock.Closes gap betweenand strengthenscenter of doubledoors.Positive weather sealof door center withoptional weatherstrip.Available 10, 12, 14& 16 foot heights.
SDR1635BG11/2" x 31/2" BOX GIRT
Lock seam tube forbest economy,strength and weight.20 gauge steel, G90galvanized.Available in 10, 11, 12,13'6", 14, 15, 16, 18,20, 24 foot lengths.
SDR1600ABALUMINUMBOTTOM RAIL
Trims bottom ofdoor.Use with door roller.10, 12, 14, 16 & 20 footlengths - can be spliced.
SDR1600WB BOTTOM RAILContinuous nail flange can be cut anylength.Designed with 11/4" up/down play tocompensate for seasonal changes indoor and building.Dual purpose - Use on wood doors(illus. A). Use on metal doors (illus. B).Nail to wood bottom rail or screw toaluminum vertical rail.10', 12', 14', 16', 18' &20' lengthshelp when door opening is full foot wide.
SDR1600HV “H”VERTICAL RAIL
Economy ofincluding “H” onstandard vertical.Mates with standardvertical to holddouble doorstogether.Positive weather sealof door center withoptional weatherstrip.Available 10, 12, 1416 and 18 foot heights.
SDR1635BG31/2" x 11/2" BOX GIRT
Lock seam tubefor best economy,strength, andweight.20 gauge steelG90 galvanized.Available in 10, 11,12, 13'6",14, 15, 16, 18, 20, 24 footlengths.
SDR1635BBWHITE ALUMINUM31/2" BOXBOTTOM RAIL
(10', 12', 13'6", 14'15', 16', 18', 20', 24')Mates w/SDR1635BV tocomplete an all-white31/2" application.
SDR1635BCBOX VERTICALCLOSURE
Designed to close thegap between thecenter of doubledoors.16' lengths only.
SDR1635BR BOTTOM RAILDual purpose - attaches towood or steel girt.18 gauge steel.Bottom rail channel matesw/guide rail system.Available 8', 10', 12' lengths.
SDR1601CG CENTER GUIDESDR1600 WSWEATHER STRIPPING
GUIDE RAIL SYSTEM OPTIONS
Heavy galvanized steel.Attaches on stub post or incement in center of splitdoors & large singles.Removable stop prevents doorfrom rolling past center.Mates w/SDR1635BR bottomrail for 31/2" system &SDR 1600WB bottom rail for11/2" system.
Optional vinylweather strip sealsentire vertical tojamb.
See catalog sheet for track,trolley & hardwareproducts.
SDR0500GZ-5'SDR1000GZ-10'
Heavy galvanized steel.5' & 10' lengths - use lengthor lengths equal to 1/3 - 1/2the door panel width or moreif desired.Bracket mounting holelocated to allow lead in whendoor is closed and to aid ininstallation over metal orother obstruction.Holds door down and in.
Designed to provide easy adjustment by building crew oruser.Provides large amount ofadjustment.
GUIDE RAIL
Note: Guide System is designedto give 41/4" of in/out and 21/4" ofup/down adjustment.
A B
CMYK
