CMS Quick Flex Dali Brochure

11
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com 14.1.14

description

CMS Electracom brochure showcasing the Quick Flex Dali Solutions available to Australia and New Zealand.

Transcript of CMS Quick Flex Dali Brochure

Page 1: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

14.1.14

Page 2: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

CMS Quick Flex 5 Pole Cabling Solution

The CMS 5 Pole product is a tried and tested system being used into major projects across Australia

and New Zealand for the past ten years. The CMS Quick flex cabling solution is a modular five pole

softwiring system for Dali, DSI, CBUS, KNX & other systems requiring 5 wire lighting systems. CMS

Quick Flex Cabling has its own unique CMS connector system which insures excellent conductivity

without the concern of separation at joints. Connectors can only be separated by a tool.

CMS Quick Flex Cabling Solution is ideal for the following applications: Education, Retail, Health,

Commercial Offices, Airports & Public Sectors.

CMS Electracom are able to supply large quantities of our Quick flex products, in most cases, at short

notice due to large stockholdings across all major capital cities in Australia and New Zealand. The

existing relationships with prominent education institutions, consulting engineers and leading electrical

engineers contractors around Australia & New Zealand ensure priority service and proactive response by

professionally trained CMS personnel.

The use of the CMS Quick flex modular wiring system will drastically reduce installation time for the

contractor, delivering you cost savings on site.

The 5 Pole modular wiring system is increasing amongst new projects in Australia and New Zealand, and

is being specified more frequently by designers and engineers. The energy efficiencies achieved by this

form of modular wiring delivers exceptional cost savings, and most importantly sustainable design

solution management to the end-user.

CMS is committed to contributing to sustainable design

At CMS, we have long been of the opinion that environmental issues must be factored into the building

design of the future. CMS Electracom is a company committed to Corporate Social Responsibility. How

we implement this is through product stewardship, best practise purchasing to meet Australian

standards, bringing alternative and reduced environmental impact products to our clients.

The Quick Flex system is environmentally friendly, having ROHS and Best Environmental Practice

Certification. To ensure your project adheres to Green Star rating, CMS have direct access to supply

certified PVC-Free cabling system that have been stringently tested by independent laboratories to meet

Green Star compliance.

1 14.1.14

Page 3: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Features & Benefits of CMS 5 Pole Solution

♦ Installation time for the contractor is drastically reduced, delivering up to 30% reduction in

labour costs

♦ Reduction in Waste - Zero onsite material waste

♦ Uncomplicated wiring layout, requiring only 4 components for a total solution!

♦ Cost & Energy Efficient

♦ Safe & Easy Maintenance - isolation during maintenance by removing a single light lead from

the bank of ‘T’ pieces.

♦ Simple integration

Why deal with CMS Electracom?

♦ Supplying wiring & power solutions since 1979

♦ Access to industry trained professionals

♦ Ability to supply small to large orders to meet your project schedules

♦ Dedicated CMS designers and engineers to support custom solutions

♦ Local support by CMS Offices in Sydney, Melbourne, Brisbane, Perth, Auckland, London &

Singapore

14.1.14 2

Page 4: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

CMS Quick Flex 5 Pole Installation Examples

How we work?

1) Design

2) Develop

3) Deliver

CMS will take you through the process from concept to completion of

wiring and power requirements.

CMS experienced team of professionals are trained to provide consultation,

estimating & engineering support to all your project needs.

14.1.14 3

Page 5: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Introducing the CMS 5 Pole Solution

Image Part Number Description

QF1

Starter Socket - Transition between hard

and softwiring Tunnel terminals to A5.2

Socket

QF2

Interconnecting Lead, 5 core, 3x2.5mm²

(A,N,E) & 2x1.5mm² Dali, A5 Socket to

Plug

QF3

Supply Cable, A5.1 Plug to free end, 5

core, 3x2.5mm² (A,N,E) & 2x1.5mm²

Dali.

QFS3 A5.2 Socket to free end, 5 core,

3x2.5mm² (A,N,E) & 2x1.5mm² Dali

QF3a Supply Cable, A5.1 Plug to free end,

5x1.0mm², maximum 2.5metres

For Special Project Pricing, Email Your Plans To

[email protected]

14.1.14 4

Page 6: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Image Part Number Description

QF3b

Supply Cable, A5.1 Plug to B5.2 Socket.

Mates with QF6 Light Plug. 3x2.5mm²

(A,N,E) & 2x1.5mm² Dali.

QF3c

Supply Cable, A5.1 Plug to B5.2 Socket.

Mates with QF6 Light Plug. 5x1.0mm²,

maximum 2.5metres

QF4 A5 Plug/Socket with tails for direct

connection.

QF5 Interceptor allows splitting of Dali & Power

circuits, i.e. when adding new power circuit.

QF6 Lighting Adaptor B5.1 Plug - Push fit

termination.

Design & Estimating Support for all your Project Needs

14.1.14 5

Page 7: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Image Part Number Description

B5T ‘T’ Adaptor IN/OUT A5 connector and B5.2

Lighting Socket.

B5.212 B Type Socket - Rewireable.

A5.T ‘T’ Adaptor 1 IN/2OUT A5 connector.

14.1.14 6

Page 8: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Notes:

- Standard colour for light lead is Black (BK) or White (WT)

- Standard colour for 5 Pin socket is White (WT)

5 POLE PLUG & SOCKET

ORDERING INFORMATION

PART NO. DESCRIPTION

QF75WT Single 10Amp 250v 5 pin Socket - White

QF7A-25BK 2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black

QF7A-100BK 10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black

QF7A-25WT 2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White

QF7A-100WT 10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White

PLEASE CALL US FOR THE MOST UP TO DATE SPECIFICATIONS AND PRICING

QF75 Shown

5 Pin plug shown

The CMS 5 pole plug base is the latest socket

designed by CMS Electracom suitable for Dali, DSI

and BMS lighting control networks. The system is

used as an alternative to our Quick Flex 5 pole ‘plug

and play’ system.

The CMS 5 Pole plug base will also accept a

standard Australian 3 pin plug so you can future

proof your next installation if a lighting control

system is desired at a later stage.

Nearly every new office today incorporates some

level of intelligent light level sensors, movement

sensors, zoned lighting scene setting and time

clocks.

In areas where you have exposed ceilings or long

distance between light fittings/devices the CMS 5

pole plug base system will provide a convenient

and cost effective solution for your next installation.

14.1.14 7

Page 9: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

5 Pole Dali 5pin Plug Base Application

Part No: QF75

Step 1:

Strip cable to recommended length.

Step 2:

Terminate cable wiring into terminal blocks,

ensure correct polarity, use break-out areas in

socket body to allow cable entry and exit.

Step 3:

Mount unit using screw mounting holes onto

industry standard conduit mounting block or

use mounting plate provided.

Rating - 10A 250V a.c

Conductor range - 1.0mm2 to 2.5mm2 solid/

stranded to AS/NZS5000

This product must be installed by a qualified

electrician.

Disconnect power supply before connecting or

disconnecting this product.

Active contacts rated low voltage max. 10Amps

Step 1:

Step 2:

Step 3:

14.1.14 8

Page 10: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

27.11.14 9

CMS QUICK FLEX QF75-02

Notes:

- **Denotes colour is White (WT) or Black (BK) (for light lead only)

- For associated parts refer CMS catalogue Dali products section pages 1- 8

ORDERING INFORMATION

PART NO. DESCRIPTION

QF75-02BK Dual socket 10amp 250v 5pin socket - Black only

QF7A-25** Light lead free end to CMS 5pin plug - 2500mm

QF7A-100** Light lead free end to CMS 5pin plug - 10,000mm

The Quick Flex QF75-02 provides a simplified solution for creating a modular DALI, DSI, CBus or BMS

backbone allowing for direct retrofit of a 3-pin install, whilst providing the foundation for future intelligent

lighting fit outs.

Utilising QF7A Light lead/5-pin plugs together with QF2 interconnecting leads, the Quick Flex QF72-02

socket makes quick and easy work of daisy-chaining multiple luminaires into a service outlet. Inclusion

of both hardwired and continuous-line mounting provide flexible installation options catering to any

application.

The 5-pin outlet also directly accepts the retrofit of AS/NZS 3112 standard 3-pin plugs for existing

installations with the option to upgrade to an intelligent lighting control system in the future.

QF75-02 5-pin Socket QF7A-25 5-pin plug shown in black

With labour and project costs in mind, the Quick

Flex QF75-02, used together with CMS adaptors

and installation couplers, delivers a time-saving,

cost-effective and flexible solution for new or

planned intelligent lighting applications.

Page 11: CMS Quick Flex Dali Brochure

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

17.11.14 10

QF75-02 Installation Manual

2. Plug the appropriate QF interconnecting leads or T-piece connectors into the QF7502 as in the

example shown. (see CMS catalogue for more information) The QF7502 utilises the 5 pin QF7A

CMS plug and will also accept Australian standard 3 pin plugs.

3. The two extra pins (DA L2 and DA L3) can be used as alternative 250V 10A connections or for

low voltage Dali signals. It must be noted that the total output load rating of the product is 10A

single phase and this must not be exceeded in any way or by any configuration of inputs.

This product must be installed by a qualified electrician.

Disconnect power supply before connecting or disconnecting this product.

Active contacts rated low voltage max. 10Amps Product tested rating 20A 250V/50Hz A.C

1. Mount the QF7502 unit using the mounting holes provided using screws suitable to your

application. Alternatively, hang the QF7502 to wire by using the clip feature of the product.