CMS L1 Muon Trigger Upgrade
description
Transcript of CMS L1 Muon Trigger Upgrade
CMS L1 Muon Trigger Upgrade
Victor Golovtsov
PNPI
468 CSC Chambers
160 Optical Cables
~ 50 GB/s
60 Peripheral Crates
1Track Finder Crate
4 SCSI-II Cables
~ 600 MB/s
CMS L1 Muon Trigger Project. PNPI activity
6064 Copper Cables
~ 1 TB/s
CMS L1 Trigger Block Diagram
4 MuonTracksto
L1 GT
Track SegmentsLocal Tracks
CMU/ PNPI : Anode front-end electronics (AD16 boards) 160 000 channels
UCLA/ PNPI : Anode local charge track electronics
(ALCT 288, ALCT384, ALCT672 boards)
Muon pattern-finder logic for local track One board per chamber
UF/ PNPI : CSC Track Finder (12 Sector Processor (SP) boards)
One board per 60 degree sector
Each SP indentifies 3 best muon tracks in 60-degree azimuthal sector and measures the
transfer momentum Pt
Reasons:
• LHC luminosity increase to 2·1034 cm-2s-1
with the value of pile-up increase up to ~ 50
• Expected increase in intensity on L1 trigger input to ~ 6 times
Consequences to use:
• Standardization and flexibility of the technological support
• Modern FPGA allows applying complex reconfigurable algorithms
and high-speed serial input-output links
• Modern high-speed optical communication channels
CMS L1 Trigger Upgrade
A basic platform for CMS upgrade is
Micro TCA ( Micro Telecommunications Computing Architecture)
developed by
PICMG (PCI Industrial Computer Manufactures Group),
cоnsisting of 227 companies (87 executive and 140 associated)
The initial goal of PICMG was to expand the PCI standard
Currently – development and implementation of guidelines
for computer architectures.
Including - Advanced TCA, Advanced MC, Micro TCA, COM Express,
Compact PCI specifications
MicroTCA describes the modular design of the systems and requirements for
Advanced Мezzanine Сards (AMC), the overall mechanical properties, form
factors of motherboards, power supply, input-output modules, cooling facilities,
as well as control features of Micro TCA-Systems
Basic platform of L1 Upgrade
MicroTCA Crate Infrastructure
Vadatech VT892 Crate АМС Мodule 2W АМС Mezzanine Board
Various types of back planes convenient for users can be applied.
The version of a back plane of VT892-123-000-000 is accepted for CMS.
Custom-made version of VT894 board can be used for additional connections
Crate is equipped with Carrier Hubs (MCHs) ports, Power Modules (PM), and Cooling Units (CUs).
MCH ports are applicable for users of commercial standards (GbE, PCIe, SRIO and SAS/SATA)
One of slots with its MCH-ports is specified to be used for distribution of frequency,
trigger signals, data acquisition, connections providing by the custom-made mezzanine board
Вased on Vadatech VT892 7U crate, providing 6 2W slots
Commercial MCHManagement Ethernet
AMC13: Clocks,
Fast Control, DAQ
Fiber Links from Detector
Ethernet
Fiber Links from Detector
Power
Power
Fiber Links to Trigger
AMC13 – custom-made module providing ТТС- signals
and TTS & DAQ connection
AMC13 should be set in the second slot and equipped by the back panel board to
provide communication "point-to-point" to each of 12 AMC slots
AMC13 doesn’t use TTCrx ASIC, it is based on ADN2814 chip, providing the restoration
of frequency of 160 МHz and TTC data flow of 80 МB/s
AMC13 provides a delay of the trigger signal (Level 1)
and readout pipeline (Level 2) with rate of 5 Gb/s
CMS – Micro TCA Crate
12 AMC Slots
Fiber Links to Trigger
Optical Module
Back Plane Connector
Custom Panel 30 mm long
Mezzanine Board
Оptical Connectors
Logic Module
Logic Module contains Virtex-7 XC7VX690T FPGA:
80 GTH-Transceivers up to 13 Gb/s, 1М Logic Cells, 3600 DSP Slices etc
LUT on the mezzanine board with address space of 30 bits
Optical module:
• 7 12-channel optical receivers Avago AFBR-820BEZ
• 3 12- channel optical transmitters Avago AFBR-810BEZ
In total 86 optical inputs and 28 optical outputs with the rate of up to 10 Gb/s
CMS CR -2013/383 (12 Nov 2013)
The CMS Modular Track Finder Board MTF7
University of Florida, Rice University
Sestor Processor Preproduction MTF7
The main task is reduction of intensity of L1 trigger without essential loss of efficiency.
The philosophy of the original trigger has some redundancy :
three independent muon systems are associated at the level of the global trigger
The upgrade trigger has the association at the level of track finding to provide a quality selection
of tracks for the information of all three systems .
Upgrade Muon Trigger , 1 Sector Original Muon Trigger Upgrade Muon Trigger
Separate Track Finder for a zone of overlapping between endcup and barrel (Overlap) is entered.
This is PNPI responsibility
CMS L1 Trigger Upgrade Strategy
CERN Cost Book
2014 – 2015: Test station creation and preproduction stage :
1. Crate VT892 + Infrastructure - 53 KCHF
2. Test Stand - 20 KCHF
3. Construction of 3 MTF7 prototypes - 63 KCHF
In total : 136 KCHF
L1 Trigger Upgrade : Muon Overlap Track Finder
Cost Book PNPI – 312 KCHF (Equipment Only)
Overlap region: 0.8 < /η/ < 1.25
The data of the three systems are
implemented for the trigger decision:
CSC, DT, RPC.
Muon Overlap Track Finder
2015 – 2016: Production stage :
1. Production of 10 MTF7 modules - 176 KCHF
In Total: 312 KCHF
Financial Project
2014 - 14 MRb
2015 - 16 MRb
In Total : 30 MRb
In Total: 32 MRb
2016 - 2 MRb