CMS Classic Mustang Shop Katalog 2005-2011
-
Upload
fordlovers -
Category
Documents
-
view
833 -
download
6
description
Transcript of CMS Classic Mustang Shop Katalog 2005-2011
2
SKU Description5R3Z-13064-AL5R3Z-13064-AC Polished
These trim pieces really make the front end of your Mustang/Shelby pop. Made from stamped aluminum with a brightly polished or brushed satin fi nish.
3M mounting adhesive included.
GT GRILL LIGHT BEZEL
EXTERIOR PARTS EXTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
SKU Description5R3Z-5C299-05 Polished
Give your new Mustang a retro look from old 1965-1966 GT Mustangs with the new Scott Drake GT rear valance Exhaust trim. Made with rust-proof, polished stainless steel.
3M mounting adhesive included.
GT REAR VALANCE EXHAUST TRIM
SKU Description5R3Z-17603-AL Satin5R3Z-17603-AC Polished
Cover up those boring washer nozzles. These covers are made from stamped aluminum with a brightly polished or brushed satin fi nish.
Requires silicone adhesive for mounting.
WINDSHIELD WASHER NOZZLE COVERS
SKU Description5R3Z-18A927-AL Satin5R3Z-18A927-AC Polished
A simple way to add style to your new Mustang or Shelby. Made from stamped aluminum with a brightly polished or brushed satin fi nish.
3M mounting adhesive included.
ANTENNA BASE COVER
SKU Description5R3Z-66405A26-B Satin5R3Z-66405A26BK Black
Get the race inspired look for your car with our bolt in fuel door. Low profi le design looks clean and mean. Made from 6061 billet aluminum and anodized for corrosion protection. Stainless steel countersunk hardware adorn the outer ring. Satin or Black.3M mounting adhesive included.
BILLET FUEL DOOR
SKU Description5R3Z-18813-8BL 8 Inch
8” antenna machined from 6061-T6 billet aluminum and clear anodized for a great look. Complete the look with our satin aluminum antenna base cover (below).
SHORTY BILLET ANTENNA
SKU DescriptionS8MS-16606-S Chrome Stick-OnS8MS-16606-SAS Satin Stick-OnS8MS-16606-A/E Chrome Pin Version
SHELBY LETTER EMBLEM SETPressure zinc die-cast letters.
Stick on version includes 3M mounting adhesive.Pin version includes barrel clips and will require drilling for installation.
SHELBY COBRA EMBLEMSExact detail chrome plastic emblems available for custom applications.
(1 3/4” x 2 3/4”)
3M mounting adhesive included.
SKU DescriptionF6ZZ-16228-A Right FacingF6ZZ-16228-B Left Facing
Satin
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
3
SKU Description5S3Z-29796/7-R Satin5R3Z-29796/7-BK Black
Great vintage “R” model race look. Fea-tures a brushed satin fi nish, simulated riv-ets and the Shelby name engraved in the aluminum. Also available in satin black with bright silver rivets.
3M mounting adhesive included.
QUARTER WINDOW COVERS
SKU Description5R3Z-6329796/7S Satin5R3Z-6329796/7C Polished
This trim is reminiscent of the classic GT350 Shelby Racer. Made from stamped aluminum with a brushed satin fi nish.
3M mounting adhesive included.
QUARTER WINDOW TRIM
SKU Description5R3Z-6342528-AL Satin
Simple yet stylish, this trunk lock bezel looks great. Made with stamped alumi-num with line grained satin fi nish. Fits GT only.
3M mounting adhesive included.
TRUNK LOCK TRIM
SKU Description5R3Z-29796/7-RI Aluminum
Brushed aluminum panels that go on the inside of the quarter glass to cover the tape that is seen when our outside quar-ter window covers are used.
INTERIOR QUARTER WINDOW COVERS
SKU Description5R3Z-13A613-AL Satin5R3Z-13A613-AC Polished
Stop people in their tracks with the new 3rd brake light trim. Made from stamped aluminum with a brightly polished or brushed satin fi nish.
3M mounting adhesive included.
3RD BRAKE LIGHT TRIM
SKU Description5R3Z-13489-B Satin5R3Z-13489-C Polished
Made from stamped aluminum with a brushed satin or polished fi nish.
3M mounting adhesive included.
TAIL LIGHT TRIM
SKU Description5R3Z-15A201-AL Satin5R3Z-15A201-AC Polished
Made from stamped aluminum with a brushed satin fi nish. 3M mounting adhesive included.
QUARTER LIGHT TRIM
EXTERIOR PARTS EXTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
4
SKU Description5R3Z-8C291-AAA Cover
RADIATOR COVER PANELWITH PRE-CUT HOOD PIN HOLES
SKU Description5R3Z-6316892-K Billet
Stainless steel and billet aluminum kit comes complete with special mount-ing brackets for 05-07 Mustangs. Mounting instructions included for 05-07 but can be adapted to fi t early model Mustang as well.
BILLET HOOD PIN KIT
SKU Description5R3Z-8200-6 Billet
This quality, billet grille gives a nice finish to the front of your V6 Mustang. Also available, our matching lower grille.
V6 UPPER BILLET GRILLE
SKU Description5R3Z-8200-GT Billet
This quality, billet grille gives a nice fi nish to the front of your GT Mustang. Designed specifi cally for the GT, this grille features a 3 piece design to mount around the GT grille lights, and has an opening in the middle for the running horse emblem on the front of your GT.
V8 UPPER BILLET GRILLE
SKU Description5R3Z-8200-6LB Billet V65R3Z-8200-GTLB Billet GT
This quality, lower billet grille gives a nice fi nish to the front of your Mustang.
LOWER BILLET GRILLE
This is a genuine Ford panel that we have modifi ed to accept either style of Hood Pin Kit. Makes installation much easier and saves time.
Note: Our hood pins include instructions to help you modify your orig inal panel, so this panel is not required. Does not fi t and is not required for GT500.
SKU DescriptionE53Z-STL Plug In
Turn some heads by upgrading your tail lights so they fl ash sequentially when your turn signal is on. This kit is a simple plug in kit that looks factory. Do not con-fuse this with cheap, splice-in kits!
SEQUENTIAL TAIL LIGHT KIT
SKU DescriptionS1MS-16892-SSK Stainless Steel
This complete kit comes with the pins, plates and cables to give your hood that classic muscle car look that every Mustang owner loves. special mounting brackets are also included. All stainless steel construction.
This hood pin kit does not fi t GT500.
STAINLESS STEEL HOOD PIN KIT
EXTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
5
SKU Description5R3Z-6322050/1A Satin
We stamped our covers from aluminum, added a brushed satin fi nish and blacked out the inside cup. A perfect match to our satin door lock knobs.
DOOR LOCK KNOB GROMMET COVERS
SKU Description5R3Z-6329025-BL Billet
These coat hooks are a great way to dress up your interior and they install with ease. Made from high quality 6061 billet aluminum.
Requires original mounting hardware.
BILLET COAT HOOKS
SKU UnitE7ZZ-6121850-BK Black5R3Z-6321850-S SatinE7ZZ-6121850-C Chrome
DOOR LOCK KNOBSA quick, cost effi cient way to add some style to your interior. Made by Plastic injection. Available in black, chrome or satin chrome.
SKU Description5R3Z-14A701-AL Aluminum
Stamped aluminum with brushed fi nish.
Adhesive backed.
LUMBAR SWITCH COVER
SKU Description5R3Z-14711-AL Aluminum
Stamped aluminum with brushed fi nish.
Adhesive backed.
SEAT ADJUST SWITCH COVER
SKU Description5R3Z-13208-BARS Satin
These accent strips really fi nish off the cur-rent Mustang sill plate. Made of stamped aluminum and feature a brushed satin fi nish to match our billet trim pieces. Set includes 12 accent pieces.
3M mounting adhesive included.
SILL PLATE ACCENT STRIPS
SKU Description5R3Z-6351986/7A Satin
Add some serious ‘pop’ to an often over-looked area of you Mustang interior. These accents are made from stamped aluminum with a brushed satin fi nish. Fits 2005-2007. Will not fi t 2008.
3M mounting adhesive included.
SHOULDER BELT MOUNT ACCENT
SKU Description5R3Z-63519A70-A Standard5R3Z-63519A70-B Anti-Theft5M3Z-63519A70-A Mustang5M3Z-63519A70-B Mustang w/ AT
Our map light trim is made from stamped aluminum and features a brushed satin fi nish. Includes two button accents and long accent strip. Mustang or plain ver-sions. Available with holes for use with active anti-theft, or standard without holes.3M mounting adhesive included.
MAP LIGHT ACCENT WITH BUTTONS
INTERIOR PARTS INTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
SKU Description5R3Z-6362622-AB Aluminum
Compliment the rest of the aluminum trim in your Mustang. Our seat recline le-vers are machined from high quality 6061 billet aluminum and given a clear anod-ized fi nish.This is a complete handle, not a cover, like the competition.
SEAT RECLINE LEVERS
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
6
SKU Description5R3Z-2760-BL Aluminum
Designed to fi t easily over the parking brake handle. Machined from 6061 billet aluminum.
Will not fi t GT500.
EMERGENCY BRAKE HANDLE COVER
SKU Description5M3Z-7213-WS-25 12 x 1.25 Thread
Our new resin shift ball is solid white resin, not painted. Featuring the Mustang logo on the side and 5 speed shift pattern on top.
MUSTANG WHITE RESIN SHIFT BALL (5 SPEED)
SKU Description356036-H 12mm Hurst
Now any of our 12mm x 1.25 threaded shift knobs, billet or resin, can be con-verted to fi t a Hurst shifter. Set includes a fi nely machined brass insert and a stain-less steel retaining nut.
SHIFT BALL ADAPTER
SKU Description5R3Z-7213-BL Billet
Give your shifter a high performance look with this Scott Drake shift knob. Machined from 6061 billet aluminum and has a clear anodized fi nish. Recessed numbered shift pattern painted black with R painted red.
5 SPEED SHIFT KNOB
SKU Description5M3Z-7213-BL 12 x 1.25 w/ boot retainer5M3Z-7213-BLH 3/8 x 16 hurst5M3Z-7213-BLR 12 x 1.25 short shifter
This is the ultimate shift knob. Machined out of 6061 billet aluminum, clear anod-ized and stamped with the Mustang logo.Stock or hurst threads. Stock shifter knob includes special boot retainer.
MUSTANG SHIFT KNOB
SKU Description5M3Z-6306024-MV Mustang5R3Z-6306024-GT GT
Creates eye appeal in the right place. Embroidered in silver, this simulated leather cover with stitched seams adds extra detail. Available with GT Mus-tang logo or Mustang running horse logo. Instructions included for installa-tion over original arm rest pad.
ARM REST COVERSKU Description5R3Z-7C488-BL Billet
Machined from solid billet aluminum. Dresses up stock automatic shifter.
A/T SHIFTER END CAPS
SKU Description5R3Z-6304490-BL Billet
INTERIOR PARTS INTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
Bring out the most in your interior with this billet cup holder trim. Machined out of high quality 6061 billet aluminum and has a clear anodized fi nish.
CUP HOLDER TRIM
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
7
SKU Description5R3Z-2457/9735A Automatic5R3Z-2457/9735M Standard5R3Z-6112020-BL Dead Pedal
Add the look of performance to your factory pedals with our aluminum covers that easily mount with provided hardware. Contoured to fi t per-fectly to the shape of the pedal with an extended lip around the entire perimeter giving that fi nished touch.
PEDAL COVERS
SKU Description5R3Z-CSB-WBL With Brake Light5R3Z-CSB Without Brake Light
A great looking add-on for your Mustang Convertible. Includes installation kit and instructions. Available with or without in-tegrated third brake light.
Note: This bar does not g ive roll-over pro-tection.
CONVERTIBLE STYLING BAR WITH INTEGRATED BRAKE LIGHT
SKU Description5R3Z-7262-BL Billet
Compliment the rest of the aluminum trim in your Mustang. Our billet shift boot trim is machined from high qual-ity 6061 billet aluminum and given a clear anodized fi nish. Aperfect match to our billet cup holder trim.
3M mounting adhesive included.
BILLET SHIFT BOOT TRIM
SKU DescriptionFM-4-BK Shelby Cobra - BlackFM-4-TN Shelby Cobra - TanFM-5-BK Pony & Bars - BlackFM-5-TN Pony & Bars - TanFM-6-BK Mustang Pony - BlackFM-6-TN Mustang Pony - Tan
These fl oor mat sets come complete with 2 front fl oor mats and 2 rear fl oor mats and are available in black or tan. These are thick, heavy duty mats that will not disappoint. Mixing allowed.
COBRA & MUSTANG EMBLEM FLOOR MATS
FM-5-TN
FM-6-TN
FM-4-BK
SKU Description5M3Z-KEYCOVERS Mustang
Bring some life to those boring Ford keys with these molded, soft key covers. Each cover features the Mustang logo.
MUSTANG KEY COVERS
INTERIOR PARTS INTERIOR PARTS ANDAND ACCESSORIES ACCESSORIES
SKU Description5R3Z-7262-AL Satin
Stamped from aluminum and given a clear anodized fi nish.Note: When buying the machined billet cup holder trim we recommend you pur-chase the machined billet shift boot trim because of the close proximity, as this will g ive you a perfect match.
3M mounting adhesive included.
SATIN SHIFT BOOT TRIM
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
8
SKU Description5R3Z-14A068-AL Satin5R3Z-14A068-BL Billet -
Add some fl ash to your engine compartment with the Scott Drake fuse box cover. Made from stamped or billet aluminum. 3M mounting adhesive included.
FUSE BOX TOP COVER
SKU DescriptionE5RZ-16826-S Stainless Steel
Made of high quality 304 stainless steel and fi nished in a brightly polished chrome to really catch the eye. Includes swivel mounting bracket and bolts directly into the factory prop rod location.
HOOD PROP ROD
SKU Description5R3Z-16796/7-B Billet
Eliminate your factory prop rod by replacing it with our beautiful bolt in gas strut hood lift kit. The assembly was engineered to lightly lift the hood for you and hold it open allowing easy access all around your en-gine bay. Truss design brackets are CNC ma-chined from 6061-T6 billet aluminum and
clear anodized. Includes high quality satin fi nish struts with stainless steel pivots and rubber bumpers to prevent chipping your paint. Use our hood mount hardware to fi nish it off . Now with improved strut design.
GAS STRUT HOOD LIFT KIT
SKU Description378178-M6-SSB Underhood359662-M8-SSB Hood Mount
A set of 28 stylish washers & bolts to dress up your engine compartment. With a brushed satin fi nish, these really ‘pop’ along side our engine caps. We also off er a hood mount hardware set with 6 wash-ers & bolts for use with our gas strut hood lift kit.
Requires 5/32” allen wrench
UNDER HOOD FENDER HARDWARE
SKU Description5R3Z-UHSSK Stainless Steel
These kits feature #8 mirrored polished stainless 14 gauge. Main cover pieces are precise-ly cut and sport a very precise fi t. All the fasteners are stain-less and polished to a mirrored fi nish just like the main cover pieces. These kits include a full set of instructions.
ENGINE DRESS UP KIT
SKU Description1F1Z-6766-BL Oil Cap - 4.6
Oil Cap Cover - 4.0/5.45R3Z-8100-BL Radiator Cap Cover5R3Z-17632-BL Washer Fluid Cap
with Retaining Cable5R3Z-2162-BL Brake Fluid Cap
5R3Z-3A006-BLPower SteeringFluid Capwith Retaining Cable
5R3Z-6750-BL Oil Dipstick Handle - 4.6
Machined from 6061 billet aluminum, we off er one more way for you to customize the look of your engine compartment. Each cap is stamped and painted. Caps fi t 4.0, 4.6 and 5.4 engines.
STANDARD BILLET ENGINE CAPS
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
9
SKU Description5R3Z-10718-BL Billet Aluminum
Is your engine bay all dressed up, but you still have that black battery standing out like a sore thumb? Add this billet alumi-num battery hold down to complete that show quality look!
BATTERY MOUNT BRACKET
SKU Description5R3Z-16A052-BL Standard 4.6
Made from 6061extruded aluminum cen-ter with machined forged ends that are precision TIG welded together to be light weight and engineered to be put to the test. A perfect compliment to our other under-hood pieces.*Will not fi t GT500 or GT’s with roots-style superchargers.
BILLET ALUMINUM STRUT TOWER BRACE
SKU Description5R3Z-16A052-ST Standard 4.0/4.6
If you aren’t looking for the frills of our billet aluminum strut tower brace but still want the added strength of a ‘top of the line’ bar, then this option is for you. Fits Mustang GT without plastic engine cover.
STANDARD STRUT TOWER BRACE
SKU Description5R3Z-7W13296-BL 10 caps
This set includes 10 caps to dress up both sides of your engine compartment. These caps are machined from 6061-T6 billet aluminum and clear anodized for a great look. Looks great with our billet strut brace!
BILLET STRUT TOWER CAPS
SKU DescriptionH-3910201 Comp/PlusH-3915201 Billet/Plus
Competition/Plus: This is legendary Hurst shifter that has been part of muscle car history for over 40 years! This shifter off ers state of the art transmission control. Designed specifi cally for 5-speed, 05-07 V8 Mustangs for easy installation without vehicle modifi cations.Billet/Plus: Features a high pivot mechanism for reduced shifter throw and sturdy construction for a more positive, precise feeling when shifting. Self centering alignment improves 2nd to 3rd up-shift gear changes to reduce “missed shifts”. Designed specifi cally for 5-speed, 05-07 V8 Mustangs for easy installation without vehicle modifi cations.
HURST SHIFTERSCompetition/Plus Billet/Plus
NEW
!
Scott Drake is proud to announce it will be off ering a full line of 05 – 09 Complete high quality Mustang exhaust systems at competitive prices. These are manufactured by Magnafl ow a leader in exhaust technology. Look for these to be available December 2008.
Magnafl ow Exhaust Systems
Com
ing
Soon!
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219
Copyright © 2005-2010 CMS Classic Mustang Shop www.classicmustangshop.com
Use of said material is strictly prohibited. Violators will be prosecuted to the fullest extent of the law.
CMS Classic Mustang Shop - www.classicmustangshop.com E-Mail: [email protected] Tel. 0049 (0) 7229 185210 Fax 0049 (0) 7229 185219