CML Panel Mount Indicators Include -...
Transcript of CML Panel Mount Indicators Include -...
Search by Part Number:
Search for a Rep/Distributor
● Voltages from 1.5 - 120 V ● Rugged, vibration- & shock-resistant ● Easy installation and secure mounting ● Easy removal ● Tiny-Mite engineered for subminiature T-1 ¾
wedge-base lamp ● Mini-Slide socket and lamp assemblies utilize T-2 slide-based incandescent
lamps
Non-Relampable
● UL ans CSA approved ● High reliability ● Lamps hard-wired into tamper-resistant housings ● Wire lead or quick connect terminal models ● Compact and economical ● Wide variety of colors, shapes, and finishes ● Special models
❍ Oil-tight to NEMA 12 ❍ Built-in flasher circuitry
LEDs
● Quick, snap-in panel mount ● Super-Brite, Ultra-Brite models ● Wide-angle visibility ● Many feature polycarbonate lenses for static discharge protection ● Many with built-in resistors ● Bi-color & tri-color available
CML Panel Mount Indicators Include:Click for more information
• 5/32" Mounting Hole• 3/16" Mounting Hole• 7/32" Mounting Hole• 1/4" Mounting Hole• 5/16" Mounting Hole• 3/8" Mounting Hole
• 1/2" Mounting Hole• 7/8" Mounting Hole• Miscellaneous• Rear Mounting Hole• Relampable Sockets • Panel Mount Technical Notes
Home | Electronics | Automotive | AviationLED Lighting | Incandescent Products | Halogen Products | Panel Mount Indicators | Neon Lamps
What's New | About CML | About SLi | Contact Us | FAQs | Site Map
©2001 Chicago Miniature Lighting, Inc.147 Central Avenue
Hackensack, NJ 07601Tel: 201.489.8989Fax: 201.489.6911
D E S C R I P T I O N A N D F E A T U R E S
5110F Series Panel Mounted LED Indicator Light
4-5
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Super Brite T-1 LED•Diffused lens allows wide angle viewing.•Low current-only 2 mA.•Built-in chip resistor operates directly
off 5 and 12 volt supply, no externalresistor needed.
Mounting: Will snap-fit into Ø.155/.158 holein panels .031/.062 thick*
Wire Leads: No. 24 AWG, 6" long, stripped .250
Anode(+): Red lead
Housing: Black Nylon
*We recommend using an installation tool to pressagainst flange of housing rather than LED.
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5110F1
5110F3
5110F5
5110F7
5110F1LC
5110F5LC
5110F7LC
5110F1-5V
5110F3-5V
5110F5-5V
5110F1-12V
5110F3-12V
5110F5-12V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
Red
Amber
Green
10
7
16
6.3
2.5
2.1
1.8
8.0
8.0
8.0
8
8
8
10
10
20
20
2
2
2
10
10
10
13
13
13
30
25
30
30
7
7
7
20
15
15
20
20
20
2.0
2.0
2.2
2.1
1.8
1.8
1.9
5
5
5
12
12
12
3.0
3.0
3.0
3.0
2.2
2.2
2.7
7.5
7.5
7.5
15
15
15
1.0
.09
.09
1.0
.007
.007
.007
-
-
-
-
-
-
5
5
4
5
5
5
5
5
5
5
5
5
5
635
603
562
585
635
565
583
655
583
565
655
583
565
Ø.190
.030
.410
.190
D E S C R I P T I O N A N D F E A T U R E S
5111F Series Panel Mounted LED Indicator Light
4-4
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Super Brite T-1 LED•20mcd-diffused lens allows wide angle viewing.•Low current-only 2 mA.•Built-in chip resistor operates directly
off 5 volt supply, no external resistor needed.
Mounting: Will snap-fit into Ø.155/.158 holein panels .031/.062 thick*
Terminals: .020 sq.
Housing: Black Nylon
*We recommend using an installation tool to pressagainst flange of housing rather than LED.
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5111F1
5111F3
5111F5
5111F7
5111F1LC
5111F5LC
5111F7LC
5111F1-5V
5111F3-5V
5111F5-5V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
10
7
16
6.3
2.5
2.1
1.8
8.0
8.0
8.0
10
10
10
10
2
2
2
10
10
10
30
30
30
30
7
7
7
15
15
15
2.0
2.2
2.2
2.1
1.8
1.8
1.9
5
5
5
3.0
3.0
3.0
3.0
2.2
2.2
2.7
7.5
7.5
7.5
1.0
.09
.09
1.0
.007
.007
.007
-
-
-
5
5
4
5
5
5
5
5
5
5
650
603
562
585
635
565
583
635
583
565
.190 MAX..030
1.124
.320
.200 MIN.
.020 S Q.T Y P .
.100
LE ADSWR AP P AB LEWIR E
ANODE (+)
AS S HOWNT O P LUS S IG NF LAT OR IE NT E D
D E S C R I P T I O N A N D F E A T U R E S
5200F Series Panel Mounted LED Indicator Light
4-6
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Quick push-in panel mounting.•Attractive appearance.•Wide angle visibility.•High-intensity light output (GaAsP on GaP for red and yellow,
GaP for green.)
These assemblies offer the superior performance of SUPER BRITELEDs in a package that is economical to buy and install.
Mounting: Will snap-fit into Ø.187/.192 holein panels .020/.097 thick
Lens: Polycarbonate
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
5200F1
5200F5
5200F7
Red
Green
Yellow
6
12
20
10
20
20
30
30
30
2.0
2.2
2.1
3.0
3.0
3.0
1.0
.09
1.0
5
5
5
Ø.210
.270
.190
.410 MIN.
- +
D E S C R I P T I O N A N D F E A T U R E S
5210F Series Panel Mounted LED Indicator Light
4-7
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
This is an insulated lead version of the 5200F Series Sub-miniatureSuper Brite LED assembly that offers superior performance in apackage that is economical to buy and install. This series givesprotection against static discharge.
Mounting: Will snap-fit into Ø.187/.192 hole panels .020/.097 thick.
Wire leads: No. 26 AWG, 4.4/4.8 long, stripped .180/.320
Anode(+): Red lead
Lens: Polycarbonate
Housing: Polycarbonate
All dimensionsin inches.
PartNumber Color
Typ.Intensity(mcd)
RatedCurrent(mA)
Continuous
Forward
Current Max.
(mA)
ForwardVoltage Typ.(V)
ForwardVoltage Max.(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
5210F1
5210F5
5210F7
5210F6-5V
Red
Green
Yellow
Blue
6.0
12.0
20.0
10
20
20
30
30
30
(Uses #680 lamp, incandescent 200,000 hours, 5V, .06A)
2.0
2.2
2.1
3.0
3.0
3.0
1.0
.09
3.0
5
5
5
.270
.310
Ø.210
D E S C R I P T I O N A N D F E A T U R E S
Astrolite LED Indicator Lights
4-8
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Bezel/Shank Material:
Hex Nut:
Wire Leads:
Ø.193 "D" hole
.334
.188
Chrome Plated Brass
Nickel Plated Brass
26 AWG Stranded, 105°C PVC Insulation, black to Anode, white to Cathode
660
640
585
570
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
100.0
25.0
25.0
19.5
60.0
16.0
16.0
11.5
R ed
R ed
Y ellow
G reen
(V )Max.
IMax.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD95-21V G C /T R 7
C MD95-21V Y C /T R 7
C MD95-21V R C /T R 7
C MD95-21S R C /T R 7
C olorLens
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
LensT ype V
640
585
57030 mA
35 mA
35 mA
35 mA
30 mA
30 mA
25 mA5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.8
2.82.8
2.0
2.02.1
25
25
25
25.0
25.0
19.5
16.0
16.0
11.5
R ed
Y ellow
G reenC MD95-21V G C /T R 9
C MD95-21V Y C /T R 9
C MD95-21V R C /T R 9
C lear
C lear
C lear S ingle
S ingle
S ingle
RF
All dimensions in inches.
Ø.265
.550
.120 6.00
10-32 T HD
The Chicago Miniature Lamp Astrolite indicator lights provide versatile solid state indication in an aesthetically pleasing economical,compact, panel mountable package. Luminous intensities as high as 300 mcd are available. As special order, these indicator lightscan be provided with a voltage dropping resistor built into the lead for operation at higher voltages.
D E S C R I P T I O N A N D F E A T U R E S
3990A Series Panel Mounted LED Indicator
4-9
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
Mounting: Will snap-fit in Ø.217/.221 hole in panels .031/.062 thick.
Wire Leads: No.24 AWG, 4.4/4.8 long, stripped .430/.570
Anode(+): Red lead
Housing: White nylon
Lens: Polycarbonate
All dimensionsin inches.
PartNumber Color
Typ.Intensity(mcd)
RatedCurrent(mA)
Continuous
Forward
Current Max.
(mA)
ForwardVoltage Typ.(V)
ForwardVoltage Max.(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
3990A1
3990A3
3990A5
3991A6-5V
Red
Amber
Green
Blue
10
7
16
10
10
10
30
30
30
Use #680 Incandescent Lamp-5V, .06A, 200,000 Hours
2.0
2.2
2.2
3.0
3.0
3.0
1.0
.09
.09
5
5
5
3990A7 Yellow 6.3 10 30 2.1 3.0 1.0 5
.770
.080Ø.250
D E S C R I P T I O N A N D F E A T U R E S
Panel Mounted LED Indicator Light with Wire Leads 1/4" Diameter Mounting Hole
4-12
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Features
•Super-Brite 30mcd•Low current•Built-in resistor chip operates directly off5 volt or 12 volt supply without externalresistor.
Mounting: Will snap-fit in Ø.249/.254hole in panels .031/.062 thick.
Wire leads: No. 24 AWG, 6" insulated,bonded strands, stripped 1/2"
Anode(+): Red Lead
Housing: Black Nylon
Alternate LEDs are also available in thispackage as standard variations.
All dimensionsin inches.
MAX.
.220
.530
.030
Ø.280
5
5
5
5
3.9
3.0
3.03.0
3.4
2.2
2.02.0
-
.09
1.0
1.0
50
30
35
35
B lue
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.
(mA)
P eak F orwardC urrent @1ms-300 P P S(A)
R everseB reakdownV oltage Min.(V )
F orward V oltageE mittedC olor
P art Number
5100H1
5100H3
5100H5
5100H6
T ypicalIntens ity
(mcd)
30
20
30
3.0 45
20
20
20
R atedC urrent(mA)
5
5
5
5
2.7
2.2
2.23.0
1.9
1.8
1.82.1
.007
.007
.007
1.0
7
7
7
35
Y ellow
G reen
R ed
Y ellow5100H7
5100H1LC
5100H5LC
5100H7LC
25
2.0
2.5
2.0 2
2
2
20
470
562
608
635
(nm)Wavelength
P eak
585
565
635
585
5
5
7.5
7.5
5
5
-
-
15
15
Amber
R ed5102H1-5V
5102H3-5V
6.0
7.0 10
10
5
5
5
5
20.0
20.0
20.07.5
12
12
125
-
-
-
-
15
15
15
15
G reen
Amber
R ed
G reen5102H5-5V
5102H1-12V
5102H3-12V
5102H5-12V
10.0
4.0
4.0
4.0 13
13
13
12
583
635
565
583
635
565
Low C urrent
B uilt-In R es istor 12 Volts
B uilt-In R es istor 5 Volts
D E S C R I P T I O N A N D F E A T U R E S
5100H1/5 Series Panel Mounted Bi-Color LED Indicator
4-11
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Will light red or green by reversing polarity.
Mounting: Will snap-fit in Ø.249/.254 hole in panels.031/.062 thick
Wire Leads: No. 24 AWG, 6" insulated, bonded strands,stripped 1/2"
Anode(+): Yellow lead for red light-blue lead anode forgreen light
Housing: Black Nylon
All dimensionsin inches.
PartNumber Color
Typ.Intensity(mcd)
RatedCurrent(mA)
Continuous
Forward
Current Max.
(mA)
ForwardVoltage Typ.(V)
ForwardVoltage Max.(V)
Peak Forward
Current @ 1ms-
300pps (A)
PeakWavelength(nm)
5100H1/5 Red/Green 6 20 10 2.2 2.8 .06 650 Red/565 Green
(MODE L 5100H1/5)
INT E R NAL C IR C UIT R Y
R E D
G R E E N
MAX.
.220
.530
.030
Ø.280
D E S C R I P T I O N A N D F E A T U R E S
5101H Series Panel Mounted LED Indicator Light
4-10
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Super Brite•Low current•Built-in resistor chip operates directly
off 5 supply without external resistor.
Mounting: Will snap-fit into Ø.249/.254 holein panels .031/.062 thick.
Terminals: .020 sq.
Housing: Black Nylon
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5101H1
5101H3
5101H5
5101H7
5101H1LC
5101H5LC
5101H7LC
5101H1-5V
5101H3-5V
5101H5-5V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
6.3
20
10
6.3
2.0
2.5
2.0
6.0
7.0
10.0
10
10
10
10
2
2
2
10
10
12
60
60
60
60
7
7
7
15
15
15
2.2
2.1
2.1
2.1
1.8
1.8
1.9
5
5
5
3.0
3.0
3.0
3.0
2.2
2.2
2.7
7.5
7.5
7.5
1.0
1.0
.09
1.0
.007
.007
.007
-
-
-
5
5
4
5
5
5
5
5
5
5
650
608
563
585
635
565
583
635
583
565
ANODE (+)
LE ADSWR AP P AB LEWIR E
.030.220 MAX.
.330
.450 MIN.
.020 S Q.T Y P .
.100
.280
D E S C R I P T I O N A N D F E A T U R E S
2110A, 2111A, 2112A, 2113A and 2195A Series Non-Relampable
Neon-Incandescent Indicator Lights
4-14
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate-neon transparent, incandescent-translucent
Bezel: White nylon. For black finish add "X" after the series letter(s).
Housing: White Nylon
* Incorporates G2B lamp and resistor.** Incorporates T2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
1.480B lack/R edC 2A+R esistor2113A6**2113A5*2111A42111A32111A22111A1(208-250V AC )Model No.
1.480B lackC 2A+R esistor2112A6**2112A5*2110A42110A32110A22110A1(105-125V AC )Model No.
"A" DIMLead C olorLamp usedB lueG reenWhiteAmberC learR ed
Lens C olor
Neon
.740Y ellow#2162
-2195A5-12V2195A4-12V2195A3-12V
-2195A1-12V(12V )Model No.
.740P urple#2187
-2195A5-28V2195A4-28V2195A3-28V
-2195A1-28V(28V )Model No.
Incandescent
Ø.310 MAX.
DIME NS ION "A"S E E C HAR T F OR
.190
.340
D E S C R I P T I O N A N D F E A T U R E S
2110QA, 2111QA, 2112QA, 2113QA Series Non-Relampable Neon Indicator Lights
4-15
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass, .187 x .020
Lens: Polycarbonate
Bezel: White nylon. For black finish add "X" after the series letter(s).
Housing: White Nylon
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
G reen
White
Amber
C lear
R ed
Lens C olor
2112QA5*
2110QA4
2110QA3
2110QA2
2110QA1
(105-125V AC )
Model No.
Incandescent
2113QA5*
2111QA4
2111QA3
2111QA2
2111QA1
(208-250V AC )
Model No.
Lamp C 2A+R esistor C 2A+R esistor
1.490
.190Ø.340
.690
Ø.310 MAX.
.187 T E R MINALS
D E S C R I P T I O N A N D F E A T U R E S
2120A and 2121A Series Non-Relampable Neon Lights
4-16
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C), 4.40/4.80 long, stripped .430/.570.
Lens: Polycarbonate
Bezel: White nylon. For black finish add "X" after the series letter(s).
Housing: White Nylon
Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
White
Amber
R ed
Lens C olor
C 2A+R esistor
2120A4
2120A3
2120A1
(105-125V AC )
Model No.
Neon
C 2A+R esistor
2121A4
2121A3
2121A1
(208-250V AC )
Model No.
.380
.110
1.560
Ø.310 MAX.
D E S C R I P T I O N A N D F E A T U R E S
2150A,2151A, 2112A, 2152A, 2153A and 2194A Series Non-Relampable
Neon-Incandescent Indicator Lights
4-17
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate-neon transparent, incandescent-translucent
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Incorporates G2B lamp and resistor.** Incorporates T2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
1.310B lack/R edC 2A+R esistor2153A6**2153A5*2151A42151A32151A22151A1(208-250V AC )Model No.
1.310B lackC 2A+R esistor2152A6**2152A5*2150A42150A32150A22150A1(105-125V AC )Model No.
"A" DIMLead C olorLamp usedB lueG reenWhiteAmberC learR ed
Lens C olor
Neon
.830Y ellow#2162
-2194A5-12V2194A4-12V2194A3-12V
-2194A1-12V(12V )Model No.
.830P urple#2187
-2194A5-28V2194A4-28V2194A3-28V
-2194A1-28V(28V )Model No.
Incandescent
.340.090
.380
Ø.310 MAX.
DIME NS ION "A"S E E C HAR T F OR
D E S C R I P T I O N A N D F E A T U R E S
2150QA and 2151QA Series Non-Relampable Neon Indicator Lights
4-18
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass, .187 x .020
Lens: Polycarbonate
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
2152QA5*
2150QA4
2150QA3
2150QA1
(105-125V AC )
Model No.
Incandescent
C 2A+R esistor
2153QA5-28V
2151QA4-28V
2151QA3-28V
2151QA1-28V
(208-250V AC )
Model No.
.340.090
.380
.187 T E R MINALS
Ø.310 MAX.
.690
1.310
D E S C R I P T I O N A N D F E A T U R E S
2191L Series Non-Relampable LED Solid-State Indicator Lights
4-19
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
2191L7-12V2191L5-12V2191L1-12V
(12V )Model No.
150
2191L7-6V2191L5-6V2191L1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
2191L7-24V2191L5-24V2191L1-24V
(24V )Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 246 to 13.53.5 to 6.5
V DC
1.310
Ø.310 MAX.
.380
.090.340
D E S C R I P T I O N A N D F E A T U R E S
2191QL Series Non-Relampable LED Solid-State Indicator Lights
4-20
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass .187 x .020
Lens: Polycarbonate
Anode(+): Marked above terminal
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
1000
2191QL7-24V2191QL5-24V2191QL1-24V
(24V )Model No.
390
2191QL7-12V2191QL5-12V2191QL1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.310
.690
Ø.310 MAX.
.187 T E R MINALS
.380
.090.340
D E S C R I P T I O N A N D F E A T U R E S
2191QU Series Non-Relampable LED Solid-State Indicator Lights
4-22
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass .187 x .020
Lens: Polycarbonate
Anode(+): Marked above terminal
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
1000
2191QU7-24V2191QU5-24V2191QU1-24V
(24V )Model No.
390
2191QU7-12V2191QU5-12V2191QU1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.310
.690
Ø.310 MAX.
.187 T E R MINALS
.380
.090.280
D E S C R I P T I O N A N D F E A T U R E S
2191U Series Non-Relampable LED Solid-State Indicator Lights
4-21
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
2191U7-12V2191U5-12V2191U1-12V
(12V )Model No.
150
2191U7-6V2191U5-6V2191U1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
2191U7-24V2191U5-24V2191U1-24V
(24V )Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 246 to 13.53.5 to 6.5
V DC
1.310
Ø.310 MAX.
.380
.090.280
D E S C R I P T I O N A N D F E A T U R E S
2195QA Series Non-Relampable Incandescent Indicator Lights
4-13
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass
Lens: Polycarbonate
Bezel: White nylon. For black finish add "X" after the series letter(s).
Housing: White Nylon
Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp
G reen
White
Amber
R ed
Lens C olor
#2162
2195QA5-12V
2195QA4-12V
2195QA3-12V
2195QA1-12V
12V
Model No.
Incandescent
#2187
2195QA5-28V
2195QA4-28V
2195QA3-28V
2195QA1-28V
28V
Model No.
.187 T E R MINALS
Ø.310 MAX.
.690
.800
Ø.340.190
D E S C R I P T I O N A N D F E A T U R E S
2900A Series Non-Relampable Neon Light
4-24
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN. hole in panels .020/.062 thick,use speednut #SN1287 for other panel thickness.
Wire Leads: No.22AWG (105°C), 6" long, stripped 1/2"
Lens: Tinted Transparent Polycarbonate
Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
Y ellow
Amber
C lear
R ed
Lens C olor
A9A+R esistor
2900A7
2900A3
2900A2
2900A1
(105-125V AC )
Model No.
Neon
.190
1.320
Ø.300
T Y P .S NAP F IT
Ø.350
6.25/5.94
.500
(105ßC )LE ADS 22 AWGB LAC K WIR E
D E S C R I P T I O N A N D F E A T U R E S
2990D Series Non-Relampable Incandescent Indicator Lights
4-23
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
All dimensionsin inches.
2990D4-12V2990D3-12V2990D1-12V
(12V )Model No.
2990D4-6V2990D3-6V2990D1-6V
(6V )Model No.
B lueG reenWhiteAmberR ed
Lens C olor
Incandescent
2990D4-28V2990D3-28V
2990D6-12V2990D5-12V
2990D6-6V2990D5-6V
2990D6-28V2990D5-28V
#2162#2112
MountingLead colorLamp used #2187
S upplied with push-on speednut S N1287Y ellowWhite P urple
2990D1-28V(28V )
Model No.
.940
.250
Ø.310 MAX.
Ø.410
Ø.320
D E S C R I P T I O N A N D F E A T U R E S
6010M, 6011M, 6012M, 6013M and 6091M Series Oil-Tight Non-Relampable
Neon-LED Indicator Lights
4-38
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) FileNo. E20325 Canadian Standards Association(CSA) File No. LR13346
Note: Also incorporates IN4004 (400 P.I.V.) rectifier diode.Red lead positive.
All dimensionsin inches.
Lamp C olor
Lamp used
White
Amber
R ed
Lens C olor
B lack
C 2A+R esistor
6012M5*
6010M3
6010M1
(105-125V AC )
Model No.
Incandescent
1 B lack/1 R ed
C 2A+R esistor
6013M5*
6011M3
6011M1
(208-250V AC )
Model No.
InternalR es istor(ohms)
White
Amber
R ed
Lens C olor
390
6091M7-12V
6091M5-12V
6091M1-12V
for 12V
Model No.
LE D S olid S tate Indicator
1000
6091M7-24V
6091M5-24V
6091M1-24V
for 24V
Model No.
-
4304H7
4304H5
4304H1
LE D
Incorporates
Ø.390Ø.630
.380.110
1.60
.500
3/8-24 T HR E AD
P OLY C AR B ONAT EB AS E :
(S UP P LIE D)O-R ING
Solid-state indicator lights complete withbuilt-in current-limiting resistor andrectifier diode.
Mounting: Ø.500/.505 hole. Supplied withinternal tooth lock washer and hex nut.Mounting hole pattern on page SP2.
Wire Leads: No.22* AWG (105°C),4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Bezel: Polished stainless steel. For blackfinish add "X" after the series letter(s).
Gaskets: Buna-N
Housing: White Nylon
D E S C R I P T I O N A N D F E A T U R E S
6010QM, 6011QM, 6012QM, 6013QM and 6091QM Series Oil-Tight Non-Relampable
Neon-LED Indicator Lights
4-39
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) FileNo. E20325 Canadian Standards Association(CSA) File No. LR13346
Note: Also incorporates IN4004 (400 P.I.V.) rectifier diode.Red lead positive.
All dimensionsin inches.
Lamp used
G reen
Amber
R ed
Lens C olor
C 2A+R esistor
6012QM5*
6010QM3
6010QM1
(105-125V AC )
Model No.
Incandescent
C 2A+R esistor
6013QM5*
6011QM3
6011QM1
(208-250V AC )
Model No.
InternalR es istor(ohms)
Y ellow
G reen
R ed
Lens C olor
390
6091QM7-12V
6091QM5-12V
6091QM1-12V
for 12V
Model No.
LE D S olid S tate Indicator
1000
6091QM7-24V
6091QM5-24V
6091QM1-24V
for 24V
Model No.
-
4304H7
4304H5
4304H1
LE D
Incorporates
Solid-state indicator lights complete withbuilt-in current-limiting resistor andrectifier diode.
Meets NEMA Class 13
Mounting: Ø.380 min. hole. Supplied withinternal tooth lock washer and hex nut.Mounting hole pattern on page SP2.
Lens: Polycarbonate
Terminals: Quick-connect, tinned brass.187 .020.
Bezel: Polished stainless steel. For blackfinish add "X" after the series letter(s).
Gaskets: Buna-N
Housing: Black Nylon
.690
Ø.390Ø.630
.380.110
1.60
.500
3/8-24 T HR E AD
P OLY C AR B ONAT EB AS E :
(S UP P LIE D)O-R ING
D E S C R I P T I O N A N D F E A T U R E S
Glo-Lite Neon Indicator Lights
4-25
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
Part Number:
6063-001-534R
6063-001-634R
6073-001-534R
6073-001-634R
As special order, these indicator lights are available with white, amber or green lenses
Description
Red, Flat Face, No Bezel
Red, Conical Face, No Bezel
Red, Flat Face, Chrome Bezel
Red, Conical Face, Chrome Bezel
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Housing/Lens Material:
Bezel (6073 Series only):
Wire Leads:
.375 for 6063 Series, .500 for 6073 Series
.500 for 6063 Series, .688 for 6073 Series
1.25 for 6063 Series, .078 for 6073 Series
Nylon
Chrome Plated Brass
22 AWG, black 105°C PVC Insulation, stranded
Electrical:
Approvals:
125 Volts AC, Built-in 30K ohm 1/4 Watt resistor
UL recognized, CSA certified
All dimensions in inches.
The Chicago Miniature Lamp Glo-Lite Indicator Lights are designed for applications requiring a low cost, line voltage,
power-on indicator. These indicator lights utilize a high brightness C2A neon lamp providing good visibility and a long
life. These indicator lights are constructed with a one-piece body and lens and are available in two face configurations,
flat or conical, with or without a chrome bezel.
Ø.680
Ø.420
.300
1.31
10.0
1.47
.120
Ø.680
Ø.420
10.0
.230
Ø.420
1.35
10.0
Ø.420 .050
1.54
10.0
Flat Face Conical Face Flat face Conical Face
6063 Series 6073 Series
D E S C R I P T I O N A N D F E A T U R E S
1030D, 1031D, 1033D and 1090D Series Non-Relampable
Neon-Incandescent Indicator Lights
4-27
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long,stripped .430/.570
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" afterthe series letter(s).
Housing: White Nylon
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
1.130One B lack/One R ed
1033D5*1031D41031D31031D1
(208-250V AC )Model No.
1.130B lack
C 2A+R esistor1032D5*1030D41030D31030D1
(105-125V AC )Model No.
"A"Lead C olorLamp usedG reenWhiteAmberR ed
Lens C olor
Neon
.910Y ellow#2162
1090D5-12V1090D4-12V1090D3-12V1090D1-12V
(12V )Model No.
.910P urple#2187
1090D5-28V1090D4-28V1090D3-28V1090D1-28V
(28V )Model No.
Incandescent
DIME NS ION "A"S E E C HAR T F OR
.630
MAX.Ø.500
.200
D E S C R I P T I O N A N D F E A T U R E S
1030QD, 1031QD, 1032QD and 1033QD Series Non-Relampable Neon Indicator Lights
4-28
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Terminals: Quick-connect, tinned brass
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
1032QD5*
1030QD4
1030QD3
1030QD1
(105-125V AC )
Model No.
Neon
1033QD5*
1031QD4
1031QD3
1031QD1
(208-250V AC )
Model No.
.200
MAX.Ø.500
.630
DIME NS ION "A"S E E C HAR T F OR
T E R MINALS.187
D E S C R I P T I O N A N D F E A T U R E S
1050A, 1051A, 1052A, 1053A and 1090A Series Non-Relampable
Neon-Incandescent Indicator Lights
4-29
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.** Incorporates T2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long,stripped .430/.570
Lens: Nylon on model 1050A1, 1050A3, 1050A4,1051A1, 1051A3, 1051A4, Polycarbonate onall other models.
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
One B lack/One R edC 2A+R esistor1053A6**1053A5*1051A41051A31051A21051A1(208-250V AC )Model No.
B lackC 2A+R esistor1052A6**1052A5*1050A41050A31050A21050A1(105-125V AC )Model No.
Lead C olorLamp usedB lueG reenWhiteAmberC learR ed
Lens C olor
Neon
Y ellow#21621090A6-12V1090A5-12V1090A4-12V1090A3-12V
-1090A1-12V(12V )Model No.
P urple#21871090A6-28V1090A5-28V1090A4-28V1090A3-28V
-1090A1-28V(28V )Model No.
Incandescent
MAX.Ø.500
.630
.530
.910
D E S C R I P T I O N A N D F E A T U R E S
1050C, 1051C, 1052C, 1053C and 1090C Series Non-Relampable
Neon-Incandescent Indicator Lights
4-32
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C) 4.40/4.80 long,stripped .430/.570
Lens: Nylon on model 1050C1, 1050C3, 1050C4,1051C1, 1051C3, 1051C4, Polycarbonate onall other models.
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
One B lack/One R edC 2A+R esistor1053C 5*1051C 41051C 31051C 21051C 1(208-250V )Model No.
B lackC 2A+R esistor1052C 5*1050C 41050C 31050C 21050C 1(105-125V AC )Model No.
Lead C olorLamp usedG reenWhiteAmberC learR ed
Lens C olor
Neon
Y ellow#21621090C 5-12V1090C 4-12V1090C 3-12V
-1090C 1-12V(12V )Model No.
P urple#21871090C 5-28V1090C 4-28V1090C 3-28V
-1090C 1-28V(28V )Model No.
Incandescent
.310
MAX.Ø.500
.630
.910
D E S C R I P T I O N A N D F E A T U R E S
1050N, 1052N and 1090N Series Non-Relampable Neon-Incandescent Indicator Lights
4-34
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
Mounting: Will snap-fit into Ø.500/.505hole in panels .020/.100 thick. Push-onspeednut SN0461 also available.Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C),4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after theseries letter(s).
Housing: White Nylon
All dimensionsin inches.
C 2A+R esistor1052N5*1050N41050N31050N21050N1(105-125V AC )Model No.
Lamp usedG reenWhiteAmberC learR ed
Lens C olor
Neon
#21621090N5-12V1090N4-12V1090N3-12V
-1090N1-12V(12V )Model No.
#2187B lackLead C olor Y ellow P urple
1090N5-28V1090N4-28V1090N3-28V
-1090N1-28V(28V )Model No.
Incandescent
.910
S QUAR E.630
MAX.Ø.500
.310
D E S C R I P T I O N A N D F E A T U R E S
1050QA, 1051QA, 1052QA and 1053QA Series Non-Relampable Neon Indicator Lights
4-30
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.** Incorporates T2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
G reen
White
Amber
C lear
R ed
Lens C olor
1052QA5*
1050QA4
1050QA3
1050QA2
1050QA1
(105-125V AC )Model No.
Incandescent
1053QA5*
1051QA4
1051QA3
-
1051QA1
(208-250V )Model No.
B lue 1052QA6** 1053QA6**
Lamp used C 2A+R esistor
Quick C onnect T erminals
.530
.630
MAX.Ø.500
.910
T E R MINALS.187
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednutSN0461 also available.Mounting hole pattern on page SP2.
Terminals: Quick-connect, tinned brass
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
D E S C R I P T I O N A N D F E A T U R E S
1050QC, 1051QC, 1052QC, 1053QC and 1090QC Series Non-Relampable
Neon-Incandescent Indicator Lights
4-33
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Terminals: Tinned brass
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
C 2A+R esistor1053QC 5*1051QC 41051QC 3
-1051QC 1(208-250V )Model No.
C 2A+R esistor1052QC 5*1050QC 41050QC 31050QC 21050QC 1(105-125V AC )Model No.
Lamp usedG reenWhiteAmberC learR ed
Lens C olor
Neon
#21621090QC 5-12V1090QC 4-12V1090QC 3-12V
-1090QC 1-12V(12V )Model No.
#21871090QC 5-28V1090QC 4-28V1090QC 3-28V
-1090QC 1-28V(28V )Model No.
Incandescent
.310
T E R MINALS.187
.910
.630
MAX.Ø.500
D E S C R I P T I O N A N D F E A T U R E S
1050QN, 1052QN Series Non-Relampable Neon Indicator Light
4-35
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Will snap-fit into Ø.500/.505 holein panels .020/.100 thick. Push-on speednutSN0461 also available.Mounting hole pattern on page SP2.
Terminals: Quick-connect, Tinned brass
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
A2A+R esistor
1052QN5*
1050QN4
1050QN3
1050QN1
(105-125V AC )
Model No.
Neon
* Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
T E R MINALS.187
.910
S QUAR E.640
MAX.Ø.500
.310
D E S C R I P T I O N A N D F E A T U R E S
1090QA Series Non-Relampable Neon Indicator Lights
4-31
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
B lue
G reen
White
Amber
R ed
Lens C olor
1090QA6-12V
1090QA5-12V
1090QA4-12V
1090QA3-12V
1090QA1-12V
(12V )Model No.
Incandescent
1090QA6-28V
1090QA5-28V
1090QA4-28V
1090QA3-28V
1090QA1-28V
(28V )Model No.
Lamp used #2162 #2187
.530
.630
MAX.Ø.500
.910
T E R MINALS.187
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednutSN0461 also available.Mounting hole pattern on page SP2.
Terminals: Quick-connect, tinned brass
Lens: Polycarbonate
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
D E S C R I P T I O N A N D F E A T U R E S
1091M Series Non-Relampable LED Indicator Lights
4-36
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-incurrent-limiting resistor and rectifier diode.
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C), lead color: redand white, 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel. For black finishadd "X" after the series letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V.
Notes: Also incorporatesIN4004 (400 P.I.V.) rectifierdiode.*125 VAC supplied with6" white wire, stripped 1/2"with external 3.9K 1/2 wattresistor attached to one lead,covered with shrink tubinginsulation.
All dimensionsin inches.
390
1091M7-12V1091M5-12V1091M1-12V
(12V )Model No.
150
1091M7-6V1091M5-6V1091M1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
1091M7-24V1091M5-24V1091M1-24V
(24V )Model No.
(2) 3.9K 1/2W*(One Internal)
1091M7-125V AC1091M5-125V AC1091M1-125V AC(105-125 V AC *)
Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 24
105 to 125125 V AC -
6 to 13.53.5 to 6.5
V DC
1.130
.380
Ø.630
MAX.Ø.500
D E S C R I P T I O N A N D F E A T U R E S
1091QM Series Non-Relampable LED Indicator Lights
4-37
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-incurrent-limiting resistor and rectifier diode.
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Terminals: Quick-connect, tinned beass.Lens: Polycarbonate
Anode(+): Marked above terminal
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
1091QM7-12V1091QM5-12V1091QM1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
S olid S tate
1000
1091QM7-24V1091QM5-24V1091QM1-24V
(24V )Model No.
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.070
T E R MINALS.187
.380
Ø.630
MAX.Ø.500
D E S C R I P T I O N A N D F E A T U R E S
2990P Series Non-Relampable Incandescent Indicator Lights
4-26
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.500 MIN.
Wire Leads: No.24 AWG 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Bezel: Mirror finish chrome plated steel
Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
B lue
G reen
White
Amber
R ed
Lens C olor
2990P 6-12V
2990P 5-12V
2990P 4-12V
2990P 3-12V
2990P 1-12V
(12V )Model No.
Incandescent
2990P 6-28V
2990P 5-28V
2990P 4-28V
2990P 3-28V
2990P 1-28V
(28V )Model No.
Lamp used #2162 #2187
Lead color Y ellow P urple
Mounting P lug-button bezel
MAX.Ø.310
.940
.140
.656
D E S C R I P T I O N A N D F E A T U R E S
2620K and 2622K Series Non-Relampable Neon Indicator Light
4-40
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*Incorporates G2B lamp and resistor
Underwriters Laboratories (UL) File No. E20325�
Canadian Standards Association (CSA) File No. LR13346
Mounting: Supplied with speednut SN2089.
Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C),
4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Bezel: White nylon.
For black finish add "X" after the
series letter(s).
Housing: White Nylon
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
2622K 5*
2620K 3
2620K 3
2620K 1
(105-125V AC )Wire Leads
Model No.Neon
Ø.980
.550 MAX..140
Ø.810Ø.870
D E S C R I P T I O N A N D F E A T U R E S
2620QK and 2622QK Series Non-Relampable Neon Indicator Light
4-41
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*Incorporates G2B lamp and resistor
Underwriters Laboratories (UL) File No. E20325�
Canadian Standards Association (CSA) File No. LR13346
Mounting: Supplied with speednut SN2089.
Mounting hole pattern on page SP2.
Terminals: Quick-connect, tinned brass.
Lens: Polycarbonate
Bezel: White nylon.
For black finish add "X" after the
series letter(s).
Housing: White Nylon
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
2622QK 5*
2620QK 3
2620QK 3
2620QK 1
(105-125V AC )Wire Leads
Model No.Neon
T E R MINALS.250
.550 MAX.
Ø.980
.140
Ø.810
Ø.870
D E S C R I P T I O N A N D F E A T U R E S
2620T, 2621T, 2622T and 2623T Series Non-Relampable Neon Indicator Lights
4-42
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
* Incorporates G2B lamp and resistor.
Underwriters Laboratories (UL) File No. E20325�
Canadian Standards Association (CSA) File No. LR13346
Mounting: Supplied with push-on speednut SN2089.
Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C), 4.40/4.80 long,
stripped .430/.570.
Lens: Polycarbonate
Bezel: Polished stainless steel.
For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
Lamp used
G reen
Amber
R ed
Lens C olor
C 2A+R esistor
2622T 5*
2620T 3
2620T 1
(105-125V AC )
Model No.
Neon
2623T 5*
2621T 3
2621T 1
(208-250V AC )
Model No.
Ø.870
Ø.810
1.03 MAX.
.520 MAX.
.590
D E S C R I P T I O N A N D F E A T U R E S
2660T Series Non-Relampable Neon Flasher Indicator Lights
4-43
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Note: Flashing rate 60 to 150 per minute.
These neon flashers incorporate a built-in circuit to
provide unmistakable indication even in high ambient
light environments. Bulb is up into the lens and can be
seen from any angle. New solid state construction for
instant-on operation.
Mounting: Supplied with push-on speednut SN2089.
Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C), 4.40/4.80 long,
stripped .430/.570.
Lens: Polycarbonate
Bezel: Polished stainless steel.
For black finish add "X" after the series letter(s).
Housing: White Nylon
All dimensionsin inches.
Amber
R ed
Lens C olor
2660T 3
2660T 1
(105-125V AC )
Model No.
Neon
.920 MAX.
.590
1.03 MAX.
Ø.810
Ø.870
D E S C R I P T I O N A N D F E A T U R E S
2330D and 2332D Series Non-Relampable Neon Indicator Light
4-44
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*Incorporates G2B lamp and resistor
Underwriters Laboratories (UL) File No. E20325�
Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
2332D5*
2330D4
2330D3
2330D1
(105-125V AC )
Model No.
Neon
Mounting: Will snap-fit into .032/.100
thick panels. Use speednut for other
panel thicknesses. Available with
speednut SN1963.
Mounting hole pattern on page SP3.
Wire Leads: No.22 AWG (105°C),
4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel.
For black finish add "X" after the
series letter(s).
1.270
.130
.190
.130 MAX.
.430
D E S C R I P T I O N A N D F E A T U R E S
2330QD, 2332QD and 2390QD Series Non-Relampable Neon-Incandescent Indicator Lights
4-45
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*Incorporates G2B lamp and resistor
Underwriters Laboratories (UL) File No. E20325�
Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 6A+R esistor
2332QD5*
2330QD4
2330QD3
2330QD1
(105-125V AC )
.250 T erminals .250 T erminals
Model No.
Incandescent
#2187
2390QD5-28V
2390QD4-28V
2390QD3-28V
2390QD1-28V
(28V )
Model No.
T E R MINALS
.250
1.270
.190
.130 MAX.
.430
Mounting: Will snap-fit into .032/.100
thick panel, use speednut for other
panel thicknesses. Available with
speednut SN1963.
Mounting hole pattern on page SP3.
Terminals: Quick-connect, tinned brass.
Lens: Polycarbonate
Bezel: Polished stainless steel.
For black finish add "X" after the
series letter(s).
D E S C R I P T I O N A N D F E A T U R E S
3620D Series Non-Relampable Neon Indicator Light
4-48
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Underwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
Y ellow
Amber
R ed
Lens C olor
A1C +R esistor
3620D7
3620D3
3620D1
(105-125V AC )
Model No.
Neon
T Y P ..250±.063
-.250+.500
WHIT E NY LONB AS E MAT E R IAL:
P OLY C AR B ONAT ET R ANS P AR E NT R E DLE NS MAT E R IAL:
W/R E S IS T ORA1C NE ON LAMPLIG HT S OUR C E :
.720
.125
.370
.906
.130
C OLOR : B LAC KU.L. 101520 AWG WIR E
6.500 T Y P .
Mounting: Will snap-fit into Ø.020/.130 panel.Use speednut SN1287 for other panelthicknesses.
Wire Leads: No.24 AWG (105°C), lead color: redand white, 6" long, stripped 1/2".
Lens: Tinted transparent polycarbonate.
D E S C R I P T I O N A N D F E A T U R E S
4700A and 4702A Series Non-Relampable Neon Indicator Light
4-46
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*Incorporates G2B lamp and resistorUnderwriters Laboratories (UL) File No. E20325�Canadian Standards Association (CSA) File No. LR13346
All dimensionsin inches.
Lamp used
G reen
White
Amber
R ed
Lens C olor
C 2A+R esistor
4700A5*
4700A4
4700A3
4700A1
(105-125V AC )
Model No.
Neon
Lamp color B lack
Mounting: Ø.312/.317 in panels.020/.125 thick.
Wire Leads: No.22 AWG (105°C),4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Housing: White nylon
.530Ø.380LE NS
.770 MAX.
.980
.130.090
D E S C R I P T I O N A N D F E A T U R E S
5900K, 5902K and 5991K Series Non-Relampable Neon LED Indicator Lights
4-47
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Will snap-fit into Ø.315/.312 sq. hole inpanels .020/.130 thick.Mounting hole pattern on page SP3.
Wire Leads: No.22 AWG (105°C), lead color: redand white, 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
All dimensionsin inches.
390*
5991K 5-12V-
5991K 1-12V(12V )
Model No.
-
5902K 5**5900K 35900K 1
(105-125V AC )Model No.
(ohms)Internal R es istor
G reenAmberR ed
Lens C olor
S olid S tateNeon
1000*
5991K 5-24V-
5991K 1-24V(24V )
Model No.
-
4305H5
-C 2A+R esistorLamp used - -
5991K 7-12V-Y ellow 5991K 7-24V 4305H7
-4305H1
IncorporatesLE D
*Also incorporates IN4004 (400 P.I.V.) rectifier diode.**Incorporates G2B lamp and resistor.Underwriters Laboratories (UL) File No. E20325Canadian Standards Association (CSA) File No. LR13346
LAMP -NE ON OR LE D
S NAP LOC K (4)
45ß.260 S Q.
.380 S Q.
.040.070
1.6301.670
2802 Series Relampable Incandescent Indicator Light
4-61
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
L E N S S P E C I F I C A T I O N S
Note: For 120 volt applications, CML recommends the use of a slide base neon lamp, rather than an incandescent lamp.
.630
.810
.530
.090 .840
.380±.020
T HIS MANNE R .
NUT IS US E D IN
P ANE L WHE N HE X
0-.250T HK .
AC R OS S F LAT S
.810
HE X NUT NY LON
T HR E AD
11/16-27
B LAC K P OLY E S T E R
B ODY
B R AS S .
T E R MINALS , NIC K LE P LAT E D
.187 QUIC K C ONNE C T
B E ZE L
DOME LE NS
F LAT LE NS
R E V E R S E D AS S HOWN
WHE N HE X. NUT IS
T HIC K P ANE L
.250-.340
All dimensions in inches .
Lens Part No:
25P-306*
25P-307**
25P-326*
25P-606*
Description
Transparent dome
Translucent dome
Transparent fluted dome
Transparent cylindrical
25P-607** Translucent cylindrical
25P-626* Transparent fluted cylindrical
All dimensions in inches .
(*) R=Red, A=Amber, G=Green, C=Clear
(**) R=Red, Y=Yellow, G=Green, W=White
Ordering Information:
For use with T-2 Slide Base (standard) lamps.
Complete assembly consists of socket (2802),
lamp, and lens (see chart below).
Items supplied unassembled.
Lamp, lens and socket must be ordered
separately.
Mounting: Supplied with polyester hex nut.
Lens: Polycarbonate-threaded
Body: Black polyester
Terminals: Nickel plated brass
Bezel: Black
Dome Fluted Dome Cylindrical Fluted Cylindrical
9/16-27 T HD.
.438 Ø.625 Ø.625.438
9/16-27 T HD.
Ø.625.375
9/16-27 T HD.
Ø.625
9/16-27 T HD.
.375
2803 Series Relampable Incandescent Indicator Light
4-62
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
L E N S S P E C I F I C A T I O N S
Note: For 120 volt applications, CML recommends the use of a slide base neon lamp, rather than an incandescent lamp.
.630
.810
.530
.090 .840
.380±.020
T HIS MANNE R .
NUT IS US E D IN
P ANE L WHE N HE X
0-.250T HK .
AC R OS S F LAT S
.810
HE X NUT NY LON
T HR E AD
11/16-27
B LAC K P OLY E S T E R
B ODY
B R AS S .
T E R MINALS , NIC K LE P LAT E D
.187 QUIC K C ONNE C T
B E ZE L
DOME LE NS
F LAT LE NS
R E V E R S E D AS S HOWN
WHE N HE X. NUT IS
T HIC K P ANE L
.250-.340
All dimensions in inches .
Lens Part No:
25P-306*
25P-307**
25P-326*
25P-606*
Description
Transparent dome
Translucent dome
Transparent fluted dome
Transparent cylindrical
25P-607** Translucent cylindrical
25P-626* Transparent fluted cylindrical
All dimensions in inches .Ordering Information:
For use with T-2 Slide Base (standard) lamps.
Complete assembly consists of socket (2803),
lamp, and lens (see chart below).
Items supplied unassembled.
Lamp, lens and socket must be ordered
separately.
Mounting: Supplied with polyester hex nut.
Lens: Polycarbonate-threaded
Body: Black polyester
Terminals: Nickel plated brass
Bezel: Polished stainless steel
Dome Fluted Dome Cylindrical Fluted Cylindrical
9/16-27 T HD.
.438 Ø.625 Ø.625.438
9/16-27 T HD.
Ø.625.375
9/16-27 T HD.
Ø.625
9/16-27 T HD.
.375
(*) R=Red, A=Amber, G=Green, C=Clear
(**) R=Red, Y=Yellow, G=Green, W=White
D E S C R I P T I O N A N D F E A T U R E S
3001 and 3041 Series Relampable Round Socket
4-58
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
For use with T-2 slide base lamps (short)
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461.Mounting hole pattern on page SP2.
Terminals: Nickel plated brass
Lamp: T-1 3/4 Wedge base
Body: Black nylon
Note: Lamps must be ordered separately.
3041
3001
Model No.
.187 wide
.205 wide
T erminal S ize
Ø.590
UNDE R F LANG E
.465
.140
.860
1.140
Ø.500 MAX.
T HIC K
.016
D E S C R I P T I O N A N D F E A T U R E S
3040 and 3043 Series Relampable Incandescent Indicator Light
4-59
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:For use with T-2 slide base (short) lamps.Complete assembly consists of socket (3040 or 3043),lamp and lens (see chart below).Items supplied unassembled. Lamp lens and socketmust be ordered separately.
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461Mounting hole pattern on page SP2.
Lens: Polycarbonate, snap-on
Body: Black Nylon
Terminals: Nickel plated brass
All dimensionsin inches.
311331123111
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
31233114White 3124
31223121
311731163115
Y ellowB lueG reen
312731263125
S quare Lens No.
MAX.Ø.500
Ø.710
UNDE R F LANG E.465
.280
.770
.470
.710 S Q.
3043
3040
S ocket No.
.187 wide
.205 wide
T erminal S ize
D E S C R I P T I O N A N D F E A T U R E S
3062 Series Relampable Incandescent Indicator Light
4-60
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:For use with T-2 slide base (short) lamps.Complete assembly consists of socket (3062),lamp and lens (see chart below).Items supplied unassembled. Lamp lens and socketmust be ordered separately.
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461Mounting hole pattern on page SP2.
Lens: Polycarbonate, snap-on
Body: Black Nylon
Terminals: Nickel plated brass
All dimensionsin inches.
311331123111
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
31233114White 3124
31223121
311731163115
Y ellowB lueG reen
312731263125
S quare Lens No.
MAX.Ø.500
Ø.710
UNDE R F LANG E.465
.280
.770
.470
.710 S Q.
D E S C R I P T I O N A N D F E A T U R E S
4105 Series Relampable Socket
4-51
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
Features
Mounting: Rear twist insertion in .060 thick plastic
panels or .050/.055 thick metal panels.
Mounting hole pattern on page SP3.
Wire Leads: No.20 AWG, 4.4/4.8 long, stripped .430/.570,
color: black
Lamp: T-1 3/4 Wedge base
Housing: Black nylon
Note: Available with other leads and/or terminals
on special order. Lamps must be ordered separately.
T -1 3/4 B ULB
F ILAME NT
.340±.040
LC.540 MAX.
.410
.940
.180
.450
.340
Ø.300
D E S C R I P T I O N A N D F E A T U R E S
4106 Series Relampable Socket
4-52
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
Features
Mounting: Rear twist insertion in .060 thick plastic
panels or .050/.055 thick metal panels.
Mounting hole pattern on page SP3.
Wire Leads: No.20 AWG, 4.4/4.8 long, stripped .430/.570,
color: black
Lamp: T-1 3/4 Wedge base
Housing: Black nylon
Note: Available with other leads and/or terminals
on special order. Lamps must be ordered separately.
F ILAME NT
.940
.490 MAX.
.250
.330
LC
T -1 3/4 B ULB
Ø.330
.940
.060
.130
Ø.470
Ø.500
D E S C R I P T I O N A N D F E A T U R E S
4107 Series Relampable Socket
4-53
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
LCOF F ILAME NT
T 1-3/4 B ULB
Ø.330
.490
.060
.130
.330/.250
Ø.410
Ø.500
.940
Features
Mounting: Rear twist insertion in .060 thick plastic
panels or .050/.055 thick metal panels.
Mounting hole pattern on page SP3.
Wire Leads: No.20 AWG, 4.4/4.8 long, stripped .430/.570,
color: black
Lamp: T-1 3/4 Wedge base
Housing: Black nylon
Note: Available with other leads and/or terminals
on special order. Lamps must be ordered separately.
D E S C R I P T I O N A N D F E A T U R E S
4610 Series Relampable Indicator Light
4-55
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:
For use with T-1 3/4 wedge-based lamps, complete assembly
consists of socket (4610) lamp and lens (see chart below).
Items supplied unassembled. Lamp lens and socket must be
ordered separately.
Mounting: Model 4610 (without thread) supplied with push-on
speednut SN3486. Mounting hole can be keyed to prevent rotation.
Mounting hole pattern on page SP2.
Lens: Polycarbonate, twist-on, positively held
Bezel: Polished stainless steel.
Socket: Black Nylon
All dimensionsin inches.
462346224621
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
46334624White 4634
46324631
462746264625
Y ellowB lueG reen
463746364635
F lat Lens No.
T E R MINALS.110
R OUND LE NS
F LAT LE NS
.280
.130
.560
.470
.370
.310
Ø.310
Ø.500
.470
Ø.310
D E S C R I P T I O N A N D F E A T U R E S
4611 Series Relampable Indicator Light
4-56
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:
For use with T-1 3/4 wedge-based lamps, complete assembly
consists of socket (4611) lamp and lens (see chart below).
Items supplied unassembled. Lamp lens and socket must be
ordered separately.
Mounting: Model 4611 (threaded) supplied with zinc finished
hex nut and internal tooth lock washer.
Mounting hole pattern on page SP2.
Lens: Polycarbonate, twist-on, positively held
Bezel: Polished stainless steel.
Socket: Black Nylon
All dimensionsin inches.
462346224621
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
46334624White 4634
46324631
462746264625
Y ellowB lueG reen
463746364635
F lat Lens No.
Ø.310
.470
Ø.500
Ø.310
.310
3/8-24 UNE F
.470
.560
.130
.280
F LAT LE NS
R OUND LE NS
T E R MINALS.110
D E S C R I P T I O N A N D F E A T U R E S
Instrument Lite Relampable Indicator Lights
4-64
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Housing/Material:
Terminals:
Hex Nut:
.688
900-200
.969
.406
Black anodized aluminum
Hood Material: Black matte on aluminum
Zinc Plated steel
Solder lug terminals
Lockwasher:
Electrical Rating:
Chrome treated steel
up to 250 Volts, up to 3 Watts
Lamp Used: T-2 or T-3 1/4 Miniature bayonet
1.00
900-006
1.410
.500
Nickel plated brass
Nickel plated brass
Zinc plated steel
Brass screw terminal
Chrome treated steel
up to 250 Volts, up to 3 Watts
S-6 or C-7 Candelabra screw
All dimensionsin inches.
11/16-27 T HD.
.810
.530
.690
1.380
900-200
These Chicago Miniature Lamp Instrument Lites are specifically designed to provide localized light for illuminating panels,
meters, switches and legends. Two sizes are available to suit your specific illumination requirements. Both units feature
highly reflective surfaces on the inside of their hoods to assure peak light output and are easily relamped from the front
of the panel. The lamp is not included with this indicator light; please order the required lamp separately.
D E S C R I P T I O N A N D F E A T U R E S
Midget Flange Relampable Indicator Lights
4-57
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
Standard
131A-303R
131A-303A
131A-303G
131A-303C
Watertight
139A-403R
139A-403A
139A-403G
139A-403C
Description
Transparent Red
Transparent Amber
Transparent Green
Transparent Clear
131A-304R
131A-304Y
131A-304G
131A-304W
139A-404R
139A-404Y
139A-404G
139A-404W
Translucent Red
Translucent Yellow
Translucent Green
Translucent White
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Housing/Material:
Terminals:
Hex Nut:
.484, 5131 Type has a keyed flange anti-rotation feature,
5139 Type features a flat "D" hole mounting
.750
5131 type - .265, 5139 type - .188
Black anodized aluminum
Chrome treated steel
Tin plated brass, center contact terminal marked +
Lockwasher:
Lens:
Chrome treated steel
High temperature lexan
Lens Shank:
Electrical rating:
Nickel plated brass
up to 30 Volts, up to 2 Watt
All dimensionsin inches.
5/16-32 T HD.5/16-32 T HD.
15/32-32 T HD.
O-R ING
15/32-32 T HD.
Ø.650
Ø.578
.438
.781
.085
Ø.438
.421
Ø.550
.770
.032
5131-038 5139-038
131A-30XX 139A-40XX
Standard Watertight
The Chicago Miniature Lamp Midget Flange Indicator Lights are versatile, industry standard, front panel indicator
lights capable of accepting any T-1 3/4 midget flange base lamp. These high quality indicators provide reliable
service in a vast array of commercial and military applications (conforming to ML-L-3661). Lamps are easily
replaced from the front panel. These indicator lights are available in both a standard configuration and a watertight
configuration providing reliable status indication in the most demanding of environments. The lamp is not included
with this indicator light; please order the required lamp separately.
D E S C R I P T I O N A N D F E A T U R E S
Miniature Relampable Indicator Light
4-63
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
Part Number:
5100-822
5100-823
5100-824
5200-222
Description
solder lug terminals, no resistor
screw type terminals, no resistor
.250 Q.C. terminals, no resistor
solder lug terminals, no resistor
5200-232 solder lug terminals, built-in 22K ohm resistor
5200-242 solder lug terminals, built-in 100K ohm resistor
Lens Part No:
25P-306*
25P-307**
25P-326*
25P-606*
Description
Transparent dome
Translucent dome
Transparent fluted dome
Transparent cylindrical
25P-607** Translucent cylindrical
25P-626* Transparent fluted cylindrical
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Housing/Lens Material:
Bezel:
Mounting Bushing/Bezel:
.688
.969
.406
5100 Series-Glass filled polyester, 5200 Series-Phenolic
(5100 Series only): stainless steel
(5200 Series only): chrome plated brass
Hex Nut:
Lockwasher:
Zinc plated steel
Chromate treated steel
Lenses: High temperature lexan
Approvals:
Electrical Rating:
UL listed, CSA certified (except Q.C. terminal versions)
up to 250 Volts, up to 3 Watts (contact factory for specific product rating)
All dimensions in inches.
5100 Series 5200 Series
Dome Fluted Dome Cylindrical Fluted Cylindrical
The Chicago Miniature Lamp Miniature Indicator Lights are versatile, industry standard, front panel indicators capable of
accepting a variety of T-2 and T-3 1/4 miniature bayonet based incandescent and neon lamps. Available in the deluxe
5200 Series and the very cost efficient 5100 Series. These indicator lights accept a variety of different lens styles and colors,
and are excellent for providing a large, bright, easily noticed status indicator. The lamp is not included with this indicator
light; please order the required lamp separately.
Ø.813
.1301.6601.660 .080
Ø.813
11/16-27 T HD. 11/16-27 T HD.
9/16-27 T HD.
.438 Ø.625 Ø.625.438
9/16-27 T HD.
Ø.625.375
9/16-27 T HD.
Ø.625
9/16-27 T HD.
.375
Panel Mount Tech Notes
4-1
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Introduction
Chicago Miniature Lamp manufactures a wide
variety of indicator lights to suit most any application
requirement. Indicator lights are typically panel
mounted devices consisting of a base or lamp-
holder, a lens, and a light source providing
illumination or indication on the front of a panel.
Chicago Miniature Lamp utilizes three different
types of light sources in its indicator lights:
incandescent, neon and LED. Indicator lights are
available in both relampable and non-relampable
styles. Relampable indicator lights are designed
so that the lamp providing illumination is easily
replaced from the front of the panel once it reaches
the end of its life. Non-relampable indicator lights
have permanently installed lamps that are not
replaceable by the user. The lamps utilized in these
indicators are typically long life neons or LEDs.
The size and style of indicator light used in an
application is often dependent on user
preference. Incandescent indicators provide the
brightest indication, but have relatively short
lives and utilize the most energy. Neon indicators
have long lives, typically 10,000 to 25,000 hours,
and draw very little current. However, neons
offer very limited light output and can only be
operated at line voltage. LEDs offer an extremely
long life (typically 100,000 hours), low current draw
and good shock and vibration resistance. LEDs,
however, offer limited light output and are available
(as standards), in the basic colors of red, green
and yellow. The design engineer should always
give full consideration to all major functional
requirements and restrictions such as available
space, power source, brightness, operational life
and replaceability.
Available in a choice of wire lead or quick-connect
terminal models, Chicago Miniature Lamp indicators
feature snap-in or push-on speednut mounting and
use minimal space behind the panel. These compact
and economical lights. often outlive the products in
which they are used. Each series is designed to
enhance the appearance of the product, and is
available in a variety of colors, shapes and finishes.
Some are oil-tight to NEMA 12, others feature
built-in flasher circuitry.
Definitions and Terms
The following are the definitions of commonly used
terms Chicago Miniature uses in describing our
indicator lights.
Lamp Type: This describes the type of lamp that
the indicator light was designed to use. There are
typically a wide variety of voltage, current and light
output ratings available for each indicator light.
Termination: This indicates the type of terminals
incorporated in the indicator lights. Chicago Miniature
Lamp offers solder lugs, quick connect, screw type,
turret pins and wire leads. Solder lugs provide the
surest connection because the wire is actually
soldered directly to the terminal. Quick-connect
terminals provide the fastest means of connection
since the female terminal merely pushes onto the
male terminal of the indicator light. Wire leads
provide the greatest flexibility, as they can be
terminated or soldered directly to the assembly.
Lenses: Chicago Miniature Lamp offers a variety of
lens styles, shapes and colors. All lenses are either
translucent or transparent.
Translucent lenses appear opaque or cloudy, and
offer the greatest amount of diffusion and best up-
close appearance. Transparent lenses are clear, like
glass. They provide little or no diffusion of the light.
Transparent lenses provide the brightest indicators
but sometimes exhibit "hot spots" because of the
limited diffusion. One method used to reduce hot
spots in lenses is to add a feature called "fluting" to
the inside of the lens. Fluting is small ribs or ridges
that are molded into the inside walls of the lens,
providing greater surface area for light to reflect.
Panel Mount Tech Notes
4-2
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E SThis additional reflectance distributes the light more
evenly, reducing the hot spots and increasing the
viewing angle. All Chicago Miniature Lamp lenses are
molded from high temperature polycarbonate.
Standard lens colors are listed in the catalog. If the
color you require is not listed, please contact the
factory for information regarding custom coloring.
Approvals
Underwriter Laboratories: Where applicable,
Chicago Miniature Lamp indicator lights are U.L.
listed or U.L. recognized.
Canadian Standards Association: Where applicable,
Chicago Miniature Lamp indicator lights are C.S.A.
certified.
Military: Many Chicago Miniature Lamp indicator lights
conform to the requirements of MIL-L-3661.
Custom Designs: Chicago Miniature Lamp welcomes
your inquiries for custom or modified indicator lights.
Our experienced staff is always available to assist you
with your application.
R E P LAC E AB LE LAMP
R E MOV AB LE LE NS
F IXE D LAMP
F IXE D LE NS
Typical Relampable Indicator
Typical Non-Relampable Indicator