CM10001000 Watt AC-DC Switchers

Options available:- Droop (Zero Wire) Current Sharing

- Forced Current Sharing

- Internal ORing Diode

©2017 Abbott Technologies, Inc. AT 2905B 6/2017

MBECertified Minority

Business Enterprise

n SBA Certified Woman-Ownedn Minority Business Enterprise (MBE)n HUBZone Certifiedn ISO9001 and AS9100 Certifiedn QPL Certified products

n NAICS Codes: 334416, 334419, 335311, 335999

n DUNS: 36-065-1954n Cage Code: 58910

8203 Vineland Ave l Sun Valley, CA 91352(818) 504-0644 l Sales (800) 367-8200

Technical Support (818) 504-0644

AbbottTechnologies.com

Rock Solid Reliability for over 50 years. MADE IN

U. S. A.

Features:

- Power Factor Correction

- Compliant with MIL-STD-461, CE101, and CE102

- Meets MIL-S-901 (High Impact Shock)

- Meets applicable MIL-STD-810

- CM1000 fully sealed to meet IP65

(Optional connectors available to meet IP67)

CM1000

AbbottTechnologies.com

For Extreme Environments

3 Power Factor Correction3 Compliant with MIL-STD-461, CE101, and CE102 3 Meets MIL-S-901 (High Impact Shock)3 Meets applicable MIL-STD-810 3 Fully sealed to meet IP65 (Optional connectors available to meet IP67)

Options: Droop (Zero Wire) Current Sharing, Forced Current Sharing (up to 4 modules for a total of 4,000 watts)Internal ORing Diode

Specifications:

Model Number System

Any specifications subject to change without notice.

Model Family (CM1000 = 1000 Watt Output)

S = Standard Connector (Unit meets IP65) or M = Fully Sealed Waterproof Connector (Unit meets IP67)C = Condensing Humidity Environment

Voltage Output (see chart to right for Voltage options and Max Current)

Example as shown above: CM1000 - 1000 Watt Output with Standard Connector, 28 Volt

Maximum Current Output Rating

Output Voltage Max Current12V 75A*

13.6V 73.5A

15V 66.7A

24V 41.7A

28V 35.7A

48V 20.8A

Ordering Information:

AbbottTechnologies.com

CM1000 S 28

Call our Technical Support Department with questions: (818) 504-0644

UNLESS OTHERWISE SPECIFIED

DO NOT SCALE DRAWINGFINISH

-

TOLERANCES ARE:DIMENSIONS ARE IN INCHES.

DECIMALS ANGLES

C

B11165-20CAD FILE NO

APPLICATION

NEXT ASSY

-

USED ON

USED ON

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATAWITHIN THE DEFINITION OF THE INTERNATIONAL TRAFFIC IN ARMSREGULATIONS (ITAR) AND IS SUBJECT TO THE EXPORT CONTROL LAWSOF THE US GOVERNMENT TRANSFER OF THIS DATA BY ANY MEANS TOA FOREIGN PERSON, WHETHER IN THE UNITED STATES OR ABROAD,WITHOUT AN EXPORT LICENSE OR OTHER APPROVAL FROM THE U.S.DEPARTMENT OF STATE, IS STRICTLY PROHIBITED.

J

J1-A AC INPUT (LINE)

J1-B VDC OUTPUT RTN (-)

J3-A +SENSE

J2-A VDC OUTPUT (+)

J1-C CHASSIS GROUNDJ1-B AC INPUT (NEUTRAL)

J3-F RETURNJ3-E NC

28VDC@ 35.7A

J3-C CURRENT SHAREJ3-B -SENSE

TECHNOLOGIES, INC.TECHNOLOGIES, INC.

95-260 VRMS 47-440HzMFR58910-CM1000S28

J1 J3 J2

A BAC

B

9.00

(228

.60)

.75

(19.

05)

1.90

0(4

8.26

)

6.00 (152.40)

F

DC

EB

A

J3-D N INHIBIT

.926

(2.2

2)

9.00

(228

.60)

.900 (22.90)

.93 (2.23)

1.44(36.58)2.95(74.93)

N

DIMENSION IN PARENTHESIS ( ) ARE IN MILLIMETERS.

3.75

0(9

5.25

)

5.500(139.70)

3.75

0(9

5.25

)

*Output power limited by connector current rating. Please contact technical support for alternative connector information.

AC Input:95-260 VAC, 47-440Hz, Single Phase,Power Factor Corrected. Meets MIL-STD-1399, Section 300, Type 1 Requirements (Spike Voltage Test)

Efficiency:80% Minimum (88% Typ; 28 VDC

Model at 100% Load)

Line Regulation:+1% of Nominal over the Full Range of Line Input Voltage

Load Regulation:+1% for Change from No Load to Full Load

Ripple and Noise:Peak-to-peak combined Ripple and Noisedoes not exceed 2% of Nominal on theOutput Measured with a 20MHz bandwidth

Temperature Range:Storage, Transport and Handling:

-50°C to + 85°CAmbient Temperature:

-40°C to 70°C

Baseplate Temperature:-40°C to +70°C with no Power Derating

Overtemperature Protection:Output shut down if maximum case temperature limit is exceeded

Isolation:Input to Output: 1500 VDCInput to Case: 1500 VDCOutput to Case: 500 VDC

Short Circuit Protection:Each unit is completely protected againsta short circuit of any duration. The currentlimit circuit nominally set at 120% of fullload to reduce voltage. Output is latchedunder short circuit condition. Auto-recoveryfrom short circuit option is available.

Remote Error Sensing:Standard

Input Protection:Internal Fuse

Control Features:INHIBIT (TTL LOW = TRUE)

Reliability: MTBF 124,545 calculated per MIL-HDBK-217Fn.2/25C/Full Load Ground Benign Environment

Electromagnetic Compatibility: Meets the following MIL-STD-461 requirements: CE101, CE102

Outline Dimensions: Refer to Mechanical drawings on opposite page

Weight: 5.5lbs Typical

Environmental Conditions:Shock Test: Unit meets MIL-S-901

requirements (lightweight)Vibration Test: Unit meets MIL-STD-167,

Type 1 requirementsHumidity Test: Power supply operates

without any evidence of degraded performance in non-condensing relativehumidity up to 95%

J1

B

C A

J2J3

BA

MS3102R24-9S

J2-A VDC OUTPUT (+)J2-B VDC OUTPUT RTN (-)

MS3110E10-6S

J3-A +SENSEJ3-B -SENSEJ3-C CURRENT SHAREJ3-D N INHIBITJ3-E NCJ3-F RETURN

MS3102R16-10P

J1-A AC INPUT (LINE)J1-B AC INPUT (NEUTRAL)J1-C CHASSIS GROUND

9