Clustered Data ONTAP 8.3 Update 1, System Manager Self ... · Clustered Data ONTAP 8.3 OnCommand...
Transcript of Clustered Data ONTAP 8.3 Update 1, System Manager Self ... · Clustered Data ONTAP 8.3 OnCommand...
NETAPP UNIVERSITY
Clustered Data ONTAP 8.3 Update 1, System Manager Self-paced Lab Course ID: STRSW-SPL-CDOT83UPD1 Content Version: 1.0
NetApp University - Do Not Distribute
E-2 Clustered Data ONTAP 8.3 Update 1, System Manager: Welcome
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
ATTENTION
The information contained in this course is intended only for training. This course contains information and activities that, while beneficial for the purposes of training in a closed, non-production environment, can result in downtime or other severe consequences in a production environment. This course material is not a technical reference and should not, under any circumstances, be used in production environments. To obtain reference materials, refer to the NetApp product documentation that is located at http://now.netapp.com/.
COPYRIGHT
© 2014 NetApp, Inc. All rights reserved. Printed in the U.S.A. Specifications subject to change without notice.
No part of this document covered by copyright may be reproduced in any form or by any means—graphic, electronic, or mechanical, including photocopying, recording, taping, or storage in an electronic retrieval system—without prior written permission of NetApp, Inc.
U.S. GOVERNMENT RIGHTS
Commercial Computer Software. Government users are subject to the NetApp, Inc. standard license agreement and applicable provisions of the FAR and its supplements.
TRADEMARK INFORMATION
NetApp, the NetApp logo, Go Further, Faster, ASUP, AutoSupport, Campaign Express, Customer Fitness, CyberSnap, Data ONTAP, DataFort, FilerView, Fitness, Flash Accel, Flash Cache, Flash Pool, FlashRay, FlexCache, FlexClone, FlexPod, FlexScale, FlexShare, FlexVol, GetSuccessful, LockVault, Manage ONTAP, Mars, MetroCluster, MultiStore, OnCommand, ONTAP, ONTAPI, RAID DP, SANtricity, SecureShare, Simplicity, Simulate ONTAP, Snap Creator, SnapCopy, SnapDrive, SnapIntegrator, SnapLock, SnapManager, SnapMirror, SnapMover, SnapProtect, SnapRestore, Snapshot, SnapValidator, SnapVault, StorageGRID, Tech OnTap, and WAFL are trademarks or registered trademarks of NetApp, Inc. in the United States and/or other countries.
Other product and service names might be trademarks of NetApp or other companies. A current list of NetApp trademarks is available on the Web at http://www.netapp.com/us/legal/netapptmlist.aspx.
NetApp University - Do Not Distribute
E1-1 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
CLUSTERED DATA ONTAP 8.3 UPDATE 1: SYSTEM MANAGER
EXERCISE
In this exercise, you explore the built-in version of System Manager that ships with Data ONTAP 8.3. In
particular, you create a data aggregate, a subnet, and a storage virtual machine (SVM) within a preconfigured
cluster named cluster1. You then log in to System Manager for cluster2.
NOTE: This is a simulated environment. The clustered Data ONTAP 8.3 Simulators are not high-availability
(HA) pairs. This is not a supported configuration. The only non-HA configuration that is supported is a
single-node cluster.
FEATURED NETAPP PRODUCTS
Clustered Data ONTAP 8.3
OnCommand System Manager
KEY FEATURES TO DEMONSTRATE
Built-in OnCommand System Manager
HIGH-LEVEL VALUE PROPOSITION
Clustered Data ONTAP 8.3 provides a feature-rich environment that is often the best fit for customers.
Clustered Data ONTAP 8.3 lets you administer your cluster without installing tools.
OBJECTIVES
By the end of this exercise, you should be able to:
Log in to OnCommand System Manager for cluster1
Explore the new interface of OnCommand System Manager
Use OnCommand System Manager to create a data aggregate
Use OnCommand System Manager to create a subnet
Use OnCommand System Manager to create an SVM
Log in to OnCommand System Manager for cluster2
NetApp University - Do Not Distribute
E1-2 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
EXERCISE ENVIRONMENT
This environment consists of:
Windows Server 2012 R2 Active Directory
Two-node cluster: cluster1
HOST NAME IP ADDRESS USER NAME PASSWORD
w2k12 192.168.0.11 administrator Netapp123
cluster1 192.168.0.50 admin Netapp123
cluster1-01 192.168.0.51 admin Netapp123
cluster1-02 192.168.0.52 admin Netapp123
cluster2 192.168.0.60 admin Netapp123
cluster2-01 192.168.0.61 admin Netapp123
svm1 192.168.0.110 (assigned by subnet) vsadmin Netapp123
NOTE: This table lists only the lab components. Refer to the tasks that follow for the detailed steps.
NetApp University - Do Not Distribute
E1-3 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 1: LOG IN TO ONCOMMAND SYSTEM MANAGER FOR CLUSTER1
In this task, you log in to cluster1’s onboard System Manager from your Windows Server.
STEP ACTION
1. Verify that you see the Modern view of your assigned Windows server.
2. Click the Desktop tile.
NetApp University - Do Not Distribute
E1-4 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
3. Verify that you see the administrator desktop.
4. The new version of System Manager runs directly on the storage controller.
On your Windows desktop, double-click the “link to PuTTY” icon.
5. Verify that the PuTTY dialog appears.
6. Select the cluster1-mgmt saved session.
NetApp University - Do Not Distribute
E1-5 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
7. Click Load.
8. Click Open to start the session.
The PuTTY Security Alert should appear.
9. Click Yes to confirm the SSH fingerprint key.
10. Verify that the login prompt appears.
login as:
11. Use these credentials to authenticate with your cluster:
User Name: admin
Password: Netapp123
12. Verify that the command prompt appears.
cluster1::>
NetApp University - Do Not Distribute
E1-6 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
13. Enter this command to view the web services that are available within cluster1:
cluster1::> vserver services web show
Sample output:
Vserver Type Service Name Description Enabled
-------------- -------- ---------------- ----------------------------- -------
cluster1 admin cem OBSOLETE true
cluster1 admin compat Data ONTAP Classic Services true
cluster1 admin disco Data ONTAP Discovery true
cluster1 admin ontapi Remote Administrative API true
Support
cluster1 admin portal Data ONTAP Web Services true
Portal
cluster1 admin spi Service Processor true
Infrastructure
cluster1 admin supdiag Support Diagnostics false
cluster1 admin sysmgr OnCommand System Manager true
cluster1 admin wsman WS-MAN server true
9 entries were displayed.
14. Enter this command to verify the attributes of the configuration of System Manager web service
within cluster1:
cluster1::> vserver services web show -name sysmgr -instance
Sample output:
Vserver: cluster1
Service Name: sysmgr
Type of Vserver: admin
Version of Web Service: 1.0.0
Description of Web Service: OnCommand System Manager
Long Description of Web Service: The OnCommand System Manager web service
Service Requirements: -
Default Authorized Roles: admin, readonly
Enabled: true
SSL Only: true
Cluster user accounts with the admin and readonly roles and the http and ontapi application
login types can use a web browser to access System Manager. System Manager also runs within
an SVM that has the same name as the cluster. You can control a web browser's access to
System Manager by using this command:
vserver services web modify -name sysmgr -vserver svm_name
-enabled [true|false]
NOTE: Do not disable System Manager in the lab environment.
15. Close the PuTTY session.
NetApp University - Do Not Distribute
E1-7 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
16. Administrators access System Manager by navigating a supported browser to the cluster
management LIF. Node management LIFs do not work.
These browsers are supported:
Google Chrome 34.0 and 35.0
Microsoft Internet Explorer 10.0 and 11.0
Mozilla Firefox 29.0 and 30.0
17. On the administrator desktop, open Internet Explorer:
18. In the URL text box of Internet Explorer, enter this URL: http://192.168.0.50/
NetApp University - Do Not Distribute
E1-8 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
19. When the Certificate Error page appears, click Continue to this website (not recommended).
20. Verify that OnCommand System Manager for your assigned cluster appears in the browser.
21. Notice that, even though you entered “http” in Step 18, the web site was redirected automatically
to the security connection “https.”
NetApp University - Do Not Distribute
E1-9 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
22. Use these credentials to authenticate with your cluster:
User Name: admin
Password: Netapp123
23. Click Sign In.
24. Verify that the System Manager interface appears.
NetApp University - Do Not Distribute
E1-10 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
25. Verify that System Manager identifies two nodes for cluster1.
NetApp University - Do Not Distribute
E1-11 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 2: EXPLORE THE NEW INTERFACE OF ONCOMMAND SYSTEM MANAGER
In this task, you explore some of the changes in the latest version of OnCommand System Manager.
STEP ACTION
1. Notice that System Manager is similar to previous versions of the tool, with a navigation pane
and a content pane.
Navigation
Pane
Content
Pane
NetApp University - Do Not Distribute
E1-12 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
2. Notice that the navigation pane groups objects into three categories: Cluster, Storage Virtual
Machines (formerly Vservers), and Nodes.
3. Select the Nodes category.
4. Explore the functionality that is available for each of the cluster1 nodes.
NetApp University - Do Not Distribute
E1-13 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
5. Select the Cluster category.
6. Explore the functionality that is available for each of the subcategories: Storage, Configuration,
and Diagnostics.
NetApp University - Do Not Distribute
E1-14 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 3: USE ONCOMMAND SYSTEM MANAGER TO CREATE A DATA AGGREGATE
In this task, you create a data aggregate for an SVM.
NOTE: For more details about configuring a storage system with System Manager, see the Clustered Data
ONTAP Administration course.
STEP ACTION
1. In System Manager, select Cluster > cluster1 > Storage.
2. Click Create Aggregate.
NetApp University - Do Not Distribute
E1-15 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
3. In the Create Aggregate window, enter these settings:
Name: n1_aggr1
Disk type: cluster1-01 FCAL (Click the Browse button.)
Number of Disks: 14
4. Click Create.
NetApp University - Do Not Distribute
E1-16 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
5. In the left pane, expand Storage, select Aggregates, and verify that n1_aggr1 was created.
6. Select Cluster > cluster1 > Storage > Disks.
7. Verify that only 11 spare disks are available on cluster1-01.
NetApp University - Do Not Distribute
E1-17 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 4: USE ONCOMMAND SYSTEM MANAGER TO CREATE A SUBNET
In this task, you investigate IPspaces and broadcast domains. Then you create a subnet for an SVM.
STEP ACTION
1. Select Cluster > cluster1 > Configuration > Network.
2. If you are familiar with clustered Data ONTAP 8.2 and previous versions of System Manager,
you will notice numerous changes regarding networking in clustered Data ONTAP 8.3. In the
Clustered Data ONTAP Update 2: IPspaces course, you explore these changes in more detail.
When you create an SVM in System Manager, you must create a subnet before you can create
an SVM. In the CLI, however, you can configure an SVM without a subnet.
You can manage all network configuration through this interface within System Manager:
3. Click Create.
NetApp University - Do Not Distribute
E1-18 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
4. In the Create Subnet window, enter these settings:
Name: sn-SVM1
Subnet IP/Subnet Mask: 192.168.0.0/255.255.255.0
IP Addresses: 192.168.0.110-192.168.0.119
Gateway: 192.168.0.1
Broadcast Domain: Default (Click the Browse button.)
5. Click Create.
NetApp University - Do Not Distribute
E1-19 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
6. Verify that the new subnet was created.
NetApp University - Do Not Distribute
E1-20 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 5: USE ONCOMMAND SYSTEM MANAGER TO CREATE AN SVM
STEP ACTION
1. In System Manager, navigate to Storage Virtual Machines.
2. Verify that the cluster1 SVM list appears.
It is currently empty.
3. Click Create.
NetApp University - Do Not Distribute
E1-21 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
4. On the Storage Virtual Machine (SVM) Setup page, in the Step 1 SVM basic details dialog,
enter these settings:
SVM Name: svm1
IPspace: Default
Volume Type: FlexVol volumes
Data Protocols: CIFS
Default Language: C.UTF-8
Security Style: NTFS
Root Aggregate: n1_aggr1
Search Domains: learn.netapp.local
Name Servers: 192.168.0.11
5. Click Submit & Continue.
NetApp University - Do Not Distribute
E1-22 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
6. Click Skip to bypass the CIFS protocol setup.
In the Clustered Data ONTAP Update 3: SMB (CIFS) Enhancements course, you configure
CIFS.
NetApp University - Do Not Distribute
E1-23 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
7. In the Storage Virtual Machine (SVM) Setup, Step 3 SVM administrator details dialog, enter
these settings:
User name: vsadmin
Password: Netapp123
Confirm Password: Netapp123
Create a new LIF for SVM management: Select checkbox
Subnet: sn-SVM1
Port: cluster1-01:e0c (Click the Browse button.)
8. Click Submit & Continue.
NetApp University - Do Not Distribute
E1-24 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
9. Verify that the configuration settings are correct.
10. Click OK.
11. Select Storage Virtual Machines > cluster1.
NetApp University - Do Not Distribute
E1-25 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
12. Expand the svm1 subcategory and all subcategories under it.
13. Notice that there is no Interfaces subcategory under svm1.
14. To verify that the SVM management LIF was created by the SVM wizard, select Cluster >
cluster1 > Configuration > Network.
NetApp University - Do Not Distribute
E1-26 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
15. Notice that a single IP address was used from the subnet when the SVM’s management LIF was
created.
16. Select Network Interfaces.
NetApp University - Do Not Distribute
E1-27 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
TASK 6: LOG IN TO ONCOMMAND SYSTEM MANAGER FOR CLUSTER2
In this task, you log in to cluster2’s onboard System Manager from your Windows Server. You cannot access
cluster2 from the System Manager assigned to cluster1. Likewise, you cannot access cluster1 from the System
Manager assigned to cluster2. System Manager instances are segregated by cluster configuration.
STEP ACTION
1. On the administrator desktop, open Internet Explorer.
2. In the URL textbox of Internet Explorer, enter this URL: https://192.168.0.60/
3. When the Certificate Error page appears, click Continue to this website (not recommended).
NetApp University - Do Not Distribute
E1-28 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
4. Verify that OnCommand System Manager for your assigned cluster appears in the browser.
5. Use these credentials to authenticate with your cluster:
User Name: admin
Password: Netapp123
6. Click Sign In.
7. Verify that the System Manager interface appears.
NetApp University - Do Not Distribute
E1-29 Clustered Data ONTAP 8.3 Update 1: System Manager
© 2014 NetApp, Inc. This material is intended only for training. Reproduction is not authorized.
STEP ACTION
8. Verify that this is a single-node cluster.
END OF EXERCISE
NetApp University - Do Not Distribute