Clucth Scania
2
© Scania CV AB 1998, Sweden 04:02-01 Issue 2 en Clutch K432 15 K432 16 K432 17 K432 18 Specifications 1 585 736
-
Upload
noertjahya-ahmad -
Category
Documents
-
view
217 -
download
1
description
Clutch Scania
Transcript of Clucth Scania
© Scania CV AB 1998, Sweden
04:02-01Issue 2 en
Clutch K432 15 K432 16 K432 17 K432 18
Specifications
1 585 736
2 © Scania CV AB 1998, Sweden 0410w01b.mkr
Clutch
K432 15, K432 16, K432 17,K432 18
Specifications
Special tools
Checking plate wearPlate wear must be measured directly on theplate.
Use gauge 99 315 and measure through the pris-ing hole in the flywheel housing as illustrated.
The thickness of a new plate is 10 mm, and thewear limit is 7 mm.
Type Pull type
Lining diameter 430 mm
Pressure plate lift min. 1.8 mm
Clutch plate, max. distortion 0.8 mm
Tightening torque 47 Nm
Number Designation Drawing
99 315 Gauge0_
1665
99 315
04_0
478