ClicksClocks 20150213

1clicksclocks.de - version: 13.02.2015

clocks&clicks Clicks and ClocksStefan Burbulla Products and Price List Materials and parts for DIY modular synth cases in Eurorack formatvalid from 13.02.2015

Fidicinstrae 29 A10965 Berlin - Germany

Tel: +49308931876 [email protected] VAT: DE 165 532 124

Frames

4U (3U + 1U) Frame, silver anodisedWith threaded inserts/strips or square sliding nuts - fully assembled

Each frame consists of the following parts:

2 x 4U side panel, silver anodized aluminium,4 x rails, silver anodized aluminium,4-8 x threaded inserts, steel (silver), depending on the width or80-120 M3 sliding nuts, steel (silver), depending on the width8 x M5 screws Please note, for the 1U part the inner distance between the two rails is 28 mm. The 1U tile height is 43 mm.

Width Dimensions Order-No Price incl. VAT Price excl. VAT Threaded Inserts/Nuts

84HP 433 x 181 mm 4U-TI-84 65,00 54,62 4 x 84HP104HP 535 x 181 mm 4U-TI-104 80,00 67,23 4 x 104HP110HP 565 x 181 mm 4U-TI-110 85,00 71,43 4 x 84HP and 4 x 26HP126HP 646 x 181 mm 4U-TI-126 91,00 76,47 4 x 126HP168HP 860 x 181 mm 4U-TI-168 99,00 83,19 8 x 84HP84HP 433 x 181 mm 4U-SN-84 55,00 46,22 80 M3 nuts

104HP 535 x 181 mm 4U-SN-104 65,00 54,62 100 M3 nuts110HP 565 x 181 mm 4U-SN-110 68,00 57,14 110 M3 nuts126HP 646 x 181 mm 4U-SN-126 73,00 61,34 120 M3 nuts168HP 860 x 181 mm 4U-SN-168 78,00 65,55 160 M3 nuts

For the 104, 110, 126 and 168HP frames the threaded inserts will be in two parts, as they are only available in 84HP/427 mm.


clocks&clicks Clicks and ClocksStefan Burbulla Frames

6U Frame, black anodisedWith threaded inserts/strips or square sliding nuts - fully assembled


2 x 6U side panel, black anodized aluminium 4 x rails, black anodized aluminium 4 x threaded inserts, steel (silver), or80-120 M3 sliding nuts, depending on the width8 x M5 screws


84HP 433 x 266 mm 6U-TI-84-BK 83,00 69,75 4 x 84HP104HP 535 x 266 mm 6U-TI-104-BK 95,00 79,83 4 x 104HP126HP 646 x 266 mm 6U-TI-126-BK 110,00 92,44 4 x 126HP84HP 433 x 266 mm 6U-SN-84-BK 73,00 61,34 80 M3 nuts

104HP 535 x 266 mm 6U-SN-104-BK 81,00 68,07 100 M3 nuts126HP 646 x 266 mm 6U-SN-126-BK 92,00 77,31 120 M3 nuts

Please note that the threaded inserts or sliding nuts are zinc plated and therefore of sliver colour.



6U Frame, silver anodisedWith threaded inserts/strips or square sliding nuts - fully assembled


2 x 6U side panel, silver anodized aluminium 4 x rails, silver anodized aluminium 4-8 x threaded inserts, steel, depending on the width or80-160 M3 sliding nuts, depending on the width8 x M5 screws




For the 110 and 168HP frames the threaded inserts will in two parts.



3U Frame, black anodisedWith threaded inserts/strips or square sliding nuts - fully assembled


2 x 3U side panel, black anodized aluminium 2 x rails, black anodized aluminium 2 x threaded inserts, steel (silver), depending on the width or40-80 M3 sliding nuts, depending on the width4 x M5 screws


84HP 433 x 133 mm 3U-TI-84-BK 46,00 38,66 2 x 84HP104HP 535 x 133 mm 3U-TI-104-BK 55,00 46,22 2 x 104HP126HP 646 x 133 mm 3U-TI-126-BK 61,00 51,26 2 x 126HP84HP 433 x 133 mm 3U-SN-84-BK 40,00 33,61 40 M3 nuts

104HP 535 x 133 mm 3U-SN-104-BK 45,00 37,82 50 M3 nuts126HP 646 x 133 mm 3U-SN-126-BK 51,00 42,86 60 M3 nuts




3U Frame, silver anodisedWith threaded inserts/strips or square sliding nuts - fully assembled


2 x 3U side panel, silver anodized aluminium 2 x rails, silver aanodized aluminium 2-4 x threaded inserts, steel, depending on the width or40-80 M3 sliding nuts, depending on the width4 x M5 screws




For the 110 and 168HP frames the threaded inserts will in two parts.



3U 19 inch Frame, silverWith threaded inserts/stripsor sliding nuts

2 x 3U rack ears/brackets, silver anodized aluminium 2 x rails, Silver anodized aluminium 2 x threaded inserts, steel or 40 M3 sliding nuts4 x M5 screws

Fully assembled

Width Dimensions Order-No Price incl. VAT Price excl. VAT

84HP 482,6 x 133 mm 3U-19-TI-84 33,00 27,73 2 threaded inserts84HP 482,6 x 133 mm 3U-19-SN-84 28,00 23,53 40 M3 nuts

3U 19 inch Frame, blackWith threaded inserts/stripsor sliding nuts

2 x 3U rack ears/brackets, black anodized aluminium 2 x rails, black anodized aluminium 2 x threaded inserts, steel or 40 M3 sliding nuts4 x M5 screws

Fully assembled

Width Dimensions Order-No Price incl. VAT Price excl. VAT

84HP 482,6 x 133 mm 3U-19-TI-84-BK 43,00 36,13 2 threaded inserts84HP 482,6 x 133 mm 3U-19-SN-84-BK 38,00 31,93 40 M3 nuts



clocks&clicks Clicks and ClocksStefan Burbulla Side Panels

3U A pair of side panels 2 x 3U or 6U side panels, silver or black anodized aluminium

silver black silver black

Order-No 3U-2-SP 3U-2-SP-BK 6U-2-SP 6U-2-SP-BK

Dimensions 30 x 133 x 3 mm 30 x 133 x 3 mm 30 x 266 x 3 mm 30 x 266 x 3 mm

Price incl. VAT 11,00 20,00 19,00 30,00

Price excl. VAT 9,24 16,81 15,97 25,21

6U

4U A pair of side panels, to build a 3U + 1U frame 2 x 4U side panels, silver anodized aluminium

silver

Order-No 4U-2-SP

Dimensions 30 x 181 x 3 mm

Price incl. VAT 18,00

Price excl. VAT 15,13


clocks&clicks Clicks and ClocksStefan Burbulla Rack Ears

3U A pair of 3U rack ears/brackets 2 x 3U rack ears, silver or black anodized aluminium

silver black

Order-No 3U-2-RE 3U-2-RE-BK

Dimensions 28 x 132 x 25 mm 28 x 132 x 25 mm

Price incl. VAT 7,50 13,50

Price excl. VAT 6,30 11,34

M3 84, 104 and 126HP

1 pcs. M3 threaded insert, steel, zinc plated, profile 5 x 2 mm. Dimensions Order-No Price incl. VAT Price excl. VAT

M3 x 426,7 mm TI-M3-84 4,00 3,36 M3 x 528,3 mm TI-M3-104 * 5,00 4,20 M3 x 640,0 mm TI-M3-126 * 6,00 5,04

Threaded Inserts


clocks&clicks Clicks and ClocksStefan Burbulla Rails

Rails in flexible length The rails fit best with the side panels 3U-2-SP and 6U-2-SP or the 3U-2-RE rack ears, silver anodized aluminium, other length only on request. The endings fit for M5 bolts. Price per rail.

Length (HP) (mm) Order-No Price incl. VAT Price excl. VAT

84 427 RL-84-1 7,90 6,64 86 437 RL-86-1 8,10 6,81

104 529 RL-104-1 9,70 8,15 110 559 RL-110-1 10,20 8,57 126 640 RL-126-1 11,90 10,00 168 854 RL-168-1 14,10 11,85

1000 RL-1000-1 15,50 13,03

Black anodised rails The rails fit best with the black anodised side panels 3U-2-SP-BK and 6U-2-SP-BK or the 3U-2-RE-BK rack ears, black anodized aluminium, other length only on request. Delivery might take longer.The endings fit for M5 bolts. Price per rail.

Length (HP) (mm) Order-No Price incl. VAT Price excl. VAT

84 427 RL-84-1-BK 9,40 7,90 86 437 RL-86-1-BK 9,60 8,07

104 529 RL-104-1-BK 11,80 9,92 126 640 RL-126-1-BK 14,40 12,10


clocks&clicks Clicks and ClocksStefan Burbulla Power Supply - PSU

+/-12 V - PSU

The Clicks & Clocks power supply (PSU) delivers constant output of +/-12V, each with maximum1200 mA. The mains input can be set to 230 V or 115 V by a solder strap. The PSU ideally suited as an internal power supply as the toroidal transformer adds very low interference. The connection with the mains inlet is done via terminal flat con-nectors (6,3 mm). The same as with the output to the busboards. The input side is protected with a 400mA slow blow micro fuse. The fuse holder is soldered on the board.

The PSU is available in three different versions, 230 V, 115 V (on request), and as DIY kit.with 230 V with 115 V as DIY kit

Order-No PSU-230 PSU-115 PSU-KIT

Dimensions (width x depth x height) 196 x 80 x 60 mm 196 x 80 x 60 mm 196 x 80 x 60 mm

Price incl. VAT 80,00 80,00 70,00

Price excl. VAT 67,23 67,23 58,82

PLEASE NOTE:The Clicks & Clocks power supply DIY kit is made for experienced solderers. The pads and vias are completely con-nected to the traces, soldering is a bit more tricky, as the heat is drawn into the traces. The PCB is lead free so lead free solder is required. To adjust the PSU you will need a precise digital multimeter.A proper soldering station with temperature regulation is required. Recommended soldering temperature 380C.

TECHNICAL DISCLAIMER: Please be aware that the power supply carries mains voltage (115 or 230 V AC). According to the safety rules the installation has to be done by qualified personnel only. Please keep that in mind: Danger to Life!


clocks&clicks Clicks and ClocksStefan Burbulla Busboards

Power distribution with and without +5V adaptor The Clicks & Clocks busboard. Distribution of +/-12V, +5V (if available), indication by LEDs, including cables with flat connectors for the connection of +/-12V with the power supply (PSU), length ca. 30 cm. Power distribution for max. 14 Eurorack modules. The busboard with +5V option has a build-in adaptor that provides 100mA. The adaptor is switchable with a jumper. The height is measured without additional distance bolts (DB-M3-10-10). Dimensions (width x depth x height) Order-No Price incl. VAT Price excl. VAT

400 x 45 x 12 mm BB 25,00 21,01 400 x 45 x 19 mm BB-5V 28,00 23,53

DIY kits with and without +5V adaptor

PLEASE NOTE:The Clicks & Clocks busboard DIY kit is made for experienced solderers, as the pads and vias are completely con-nected to the traces, soldering is a bit more tricky, as the heat is drawn into the traces. The PCB is lead free so lead free solder is required. A proper soldering station with temperature regulation is required. Recommended soldering temperature 380C. You can order busboards with and without +5V adaptor.

Dimensions (width x depth x height) Order-No Price incl. VAT Price excl. VAT

400 x 45 x 12 mm BB-KIT 20,00 16,81 400 x 45 x 19 mm BB-5V-KIT 23,00 19,33



clocks&clicks Clicks and ClocksStefan Burbulla Kits

Complete sets to get started

Starter kits with rails (silver or black) or without, completely soldered or as DIY kits

The Clicks & Clocks power supply and busboards as a set with and without rails.The basic bundle (BUN-1) consists of 1 PSU and 2 busboards plus cables for the connection between PSU and bus-boards, length ca. 35 cm.Bundle silver 1 Clicks and Clocks PSU, 12V,

1200mA2 Clicks and Clocks busboards, cables for connection busboard-PSU

BUN-1 + 4 rails, silver anodised, 84HP, 427 mm, 100 M3 square sliding nuts

BUN-1 +4 rails 84HP, silver anodised, 427 mm, 4 M3 threaded inserts, 84HP, 427 mm

Order-No BUN-1 BUN-2 BUN-3

Price incl. VAT 120,00 140,00 156,00

Price excl. VAT 100,84 117,65 131,09

Bundle kit silver see above, as DIY kit see above, as DIY kit see above, as DIY kit

Order-No BUN-1-KIT BUN-2-KIT BUN-3-KIT

Price incl. VAT 100,00 120,00 136,00

Price excl. VAT 84,03 100,84 114,29

Online sources:Assembling manual PSU Assembling manual busboardsPSU installation manual online



clocks&clicks Clicks and ClocksStefan Burbulla

Complete sets to get started with black rails

Bundle black BUN-1 + 4 rails, black anodised, 84HP, 427 mm, 100 M3 square sliding nuts

BUN-1 +4 rails 84HP, black anodised, 427 mm, 4 M3 threaded inserts, 84HP, 427 mm

Order-No BUN-2-BK BUN-3-BK



Bundle kit black see above, as DIY kit see above, as DIY kit

Order-No BUN-2-BK-KIT BUN-3-BK-KIT



The power supply, output +/-12V, 1200 mA, input 230 V or 115 V. The busboard, distribution of +/-12V, +5V (if available), indication by LEDs, including cables with flat connectors for the connection of +/-12V with the power supply (PSU), length ca. 30 cm. Power distribution for max. 14 Eurorack modules.

Bundles can also be delivered with build-in +5V option. Please add 3,00 EUR/2,52 EUR (excl. VAT) to the bundle price for each busboard you want to have a +5V option build in.


Kits


clocks&clicks Clicks and ClocksStefan Burbulla Screws and Distance Blots

Distance Bolts M3 x 10 mm, 10 pcs.

Mount your busboards with the M3 hexagonal distance bolts. 10 pcs.

Order-No DB-M3-10-10

Dimensions M3 x 10 mm



Phillips Pan Head Screws M3 x 6 mm, 50 pcs.

Mount your modules with the M3 Phil-lips pan head screws. 50 pcs.

Order-No PHS-M3-6-50




Hexagon Socket Head Cap Screw, zinc plated M3 x 6 mm, 50 pcs.Style matters, mount your modules with these M3 head cap screws. 50 pcs.You will need a 2.5 mm Allen key to tighten the screws.

Order-No HSHC-M3-6-50




Phillips Pan Head Screws black, M3 x 6 mm, 50 pcs.

Mount your modules with style. M3 Phillips pan head screws, Zn-Fe Cr(VI) free, passivated, 50 pcs.

Order-No PHS-M3-6-50-BK




Countersunk Hex Screws M5 x 20 mm, 10 pcs.

Needed to mount the side panels with the rails. 10 pcs.You will need a 3.0 mm Allen key to tighten the screws.

Order-No CHS-M5-20-10




Hexagon Socket Head Cap Screw, black, M3 x 6 mm, 20 pcs.Mount your modules with even more style, Zn-Fe Cr(VI) free, passivated, RoHS conform, 20 pcs., DIN 912/ISO 4762. You will need a 2.5 mm Allen key to tighten the screws.Order-No HSHC-M3-6-20-BK





clocks&clicks Clicks and ClocksStefan Burbulla Sliding Nuts, Washers

M3 Hex Nuts100 pcs.

Use these standard hex nuts as sliding nuts in your rails. 100 pcs.

Order-No SN-M3-100

Dimensions M3



M3 Square Sliding Nuts 100 pcs.

Use these square sliding nuts in your rails. 100 pcs.

Order-No SQ-SN-M3-100

Dimensions M3



Tooth Lock or Serrated Washers, 3.2 mm 50 pcs.

Needed to prevent nuts or screws from rotation when tighten up. 50 pcs.

Order-No TLW-32-50

Dimensions 3.2 mm



Polyamide Washers M3, 50 pcs.

No marks on the front panels. Protect your modules with these washers.

Order-No PW-M3-50

Dimensions M3 - 3.2 mm



Black Washers, Polyamide M3, 50 pcs.

No marks on the front panels. Protect your modules with these polyamid washers.

Order-No PAW-M3-BK-50





clocks&clicks Clicks and ClocksStefan Burbulla Mains Inlet, Flat Connectors, Fuses

Terminal Flat Connector, 6.3 mm, 1.5 mm, 10 pcs.

Needed for the connection between mains inlet (MI-C14) and the PSU, and the connection between PSU and busboards

Order-No TFC-15-63

Dimensions 6.3 mm, 1.5 mm



Micro Fuse, Slow Blow, 20x5 mm, 1 pcs.

To protect your power supply (PSU) and modules from damage. Please make sure you choose the correct value for 1,2 or 4 PSUs.

1 PSU 2 PSU 4 PSU

Order-No MF-SB-400 MF-SB-800 MF-SB-1600

Value 400 mA 800 mA 1600 mA

Price incl. VAT 0,50 0,50 0,50

Price excl. VAT 0,42 0,42 0,42

Terminal Flat Connector, 4.8 mm, 1.5 mm, 10 pcs.

Needed for the connection between mains inlet (MI-C14) and the PSU

Order-No TFC-15-48

Dimensions 4.8 mm, 1.5 mm



Mains Inlet, Type IEC 60320-1/C14

Power inlet for your modular synth. Suiteable for max. 250 V/10 A, incl. microfuse holder (5x20 mm) and switch. Connection with 4.8 mm flat connectors.Order-No MI-C14

Dimensions 28.5 x 54.3 mm



Terminal Spade Connector for M3, 1.5 mm, 10 pcs.

Useful to connect the protective con-ductor (green/yellow wire) with the metal parts of your case.

Order-No TSC-M3-15-10





clocks&clicks Clicks and ClocksStefan Burbulla

Cable Tie Mounts, 10 pcs.

If you want your case to look good even inside, use the cable tie mounts.

Order-No CTM-20-10 CTM-25-10

Dim. in mm 20 x 20 25 x 25



Cable Ties, 10 pcs.

Fix your cables on cable mounts with this cable ties, 10 pcs.

Order-No CT-140-10 CT-280-10

Dim. in mm 140 x 3.5 280 x 4.8



Front Panels

Fill the gaps in your modular setup or build your own modules with these front panels

8 HP 6 HP

Order-No FP-8HP FP-6HP

Dim. in mm 40.6 x 128.5 30.4 x 128.5



Ribbon Cables, Mounts, Cable Ties, Front Panels

Ribbon Cables

Connect your modules with the busboard using this ribbon cables. Available in 10 to 16 and 16 to 16 variants. The length is roughly 28 cm.

10 to 16 pins 16 to 16 pins

Order-No RIB-10-16 RIB-16-16

Length ca. 28 cm ca. 28 cm




clocks&clicks Clicks and ClocksStefan Burbulla PVC Cable

PVC Cable, H07V-K, different colours, 1.5 mm, 1 m

To wire up your case internally, connection between mains inlet, PSU and busboards, and for connecting potential earth, different colours, fits for the terminal flat connectors and the spade connector.

black blue red green-yellowOrder-No CAB-15-1-BK CAB-15-1-BL CAB-15-1-RD CAB-15-1-GYLength 1 m 1 m 1 m 1 mPrice incl. VAT 1,00 1,00 1,00 1,00 Price excl. VAT 0,84 0,84 0,84 0,84


clocks&clicks Clicks and ClocksStefan Burbulla General Information

About Clicks & Clocks?

Clicks & Clocks is a small business. The main idea is to provide customers with parts that are needed to build a case or housing for a Eurorack format modular synthesizer. I had the idea during the process of building my own case. I needed to order and buy parts at several different online and other shops. This is annoying and wastes time and money. The idea grew and I setup a list of parts which I needed and others may need as well. The list still grows and I am happy to get your input.Most of the parts I offer are on stock. Except the rails in other length than 84HP. I am not yet cutting them myself, and therefore I have to order them. This can take some extra time as I depend on my vendor. I try to update my customers during the ording process.If you have any questions feel free to contact me: [email protected] Stefan Burbulla Fidicinstrae 29A 10965 Berlin Germany

How to place an order.

If you decide to order, please send me an email ([email protected]) with order numbers and amounts. Add your shipping and invoice address. I will send you an offer as PDF which is the basis for your order. Orders have to be paid in advance.

Payment

You can pay via bank transfer or PayPal.For Germany only: Commerzbank AG Berlin Kto.-Nr.: 3 248 604 00 BLZ: 100 800 00

International: SWIFT-BIC: DRESDEFF IBAN: DE95 10080000 0324860400

PayPal: [email protected]

Please be aware that PayPal fees are added on top.

Shipping cost

I usually ship with DHL. They have wide range of countries they deliver to at a decent price. Please check the shipping cost from the table below. If your country is not listed please ask for the shipping cost.The table is just for the overview. I will tell you the exact shipping cost when I send you the offer.

Country Weight 2kg Weight 5kg Weight 10kg

Australia 19,00 42,00 59,00 Austria 11,00 16,00 21,00 Belarus 19,00 29,00 34,00 Belgium 11,00 16,00 21,00 Bosnia and Herzegovina 19,00 29,00 34,00 Brazil 19,00 42,00 59,00 Bulgaria 11,00 16,00 21,00


clocks&clicks Clicks and ClocksStefan Burbulla General Information

Country Weight 2kg Weight 5kg Weight 10kg

Canada 19,00 35,00 47,00 Cyprus 19,00 35,00 47,00 Czech Republic 19,00 35,00 47,00 Denmark 11,00 16,00 21,00 Estonia 11,00 16,00 21,00 Faroe Islands 19,00 29,00 34,00 Finland 11,00 16,00 21,00 France 11,00 16,00 21,00 Germany 5,00 6,00 7,50 Greece 11,00 16,00 21,00 Hungary 11,00 16,00 21,00 Iceland 19,00 29,00 34,00 Ireland 11,00 16,00 21,00 Italy 11,00 16,00 21,00 Latvia 11,00 16,00 21,00 Liechtenstein 19,00 29,00 34,00 Lithuania 11,00 16,00 21,00 Luxembourg 11,00 16,00 21,00 Macedonia 19,00 29,00 34,00 Malta 11,00 16,00 21,00 Monaco 11,00 16,00 21,00 Montenegro 19,00 29,00 34,00 Netherlands 11,00 16,00 21,00 Norway 19,00 29,00 34,00 Poland 11,00 16,00 21,00 Portugal 11,00 16,00 21,00 Republic of Northern Cyprus 19,00 29,00 34,00 Romania 11,00 16,00 21,00 Russian Federation 19,00 29,00 34,00 San Marino 19,00 29,00 34,00 Serbia 19,00 29,00 34,00 Slovakia 11,00 16,00 21,00 Slovenia 11,00 16,00 21,00 Spain, Mainland 11,00 16,00 21,00 Sweden 11,00 16,00 21,00 Switzerland 16,00 27,00 34,00 Turkey 19,00 29,00 34,00 Ukraine 19,00 29,00 34,00 United Kingdom, Mainland 11,00 16,00 21,00 United States of America 19,00 35,00 47,00

ClicksClocks 20150213

Documents

Transcript of ClicksClocks 20150213