Clemson University Bioscience - Stainless Railings

1
This document contains SC Railing Company proprietary information. Disclosure is prohibited without the prior written permission of SC Railing Company. 7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com Glenlake is a low-maintenance choice for outdoor applications All lateral tubing was bent to create a radius on the stair landing Stainless steel tube infill creates a clean, linear design Free-standing sections were placed in wall openings along walkways Optional post-mounted handrails were utilized on the stair application Breaks in infill tubing were accommodated by doubling all mounting hardware on posts Project: Clemson University Bioscience Location: Clemson, SC Architect: Perkins + Will GC: DPR Construction Completion: December 2012 Scope: This project, with a six-month duration, called for more than 200 linear feet of our Glenlake stainless steel tube infill railing, as well as 350 feet of our Tivoli glass-supported railing. Grade 316 stainless steel was utilized for all exterior locations, which hold up to environmental exposure to heat, moisture, and airborne pollutants. Project Information University Scientific Research Building Case Study: Clemson Bioscience

Transcript of Clemson University Bioscience - Stainless Railings

Page 1: Clemson University Bioscience - Stainless Railings

This document contains SC Railing Company proprietary information. Disclosure is prohibited without the prior written permission of SC Railing Company.

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-RAIL(7245) w: sc-railing.com

Glenlake is a low-maintenance choice for outdoor applications

All lateral tubing was bent to create a radius on the stair landing

Stainless steel tube infill creates a clean, linear design

Free-standing sections were placed in wall openings along walkways

Optional post-mounted handrails were utilized on the stair application

Breaks in infill tubing were accommodated by doubling all mounting hardware on posts

Project: Clemson University Bioscience

Location: Clemson, SC

Architect: Perkins + Will

GC: DPR Construction

Completion: December 2012

Scope: This project, with a six-month duration, called for more than 200

linear feet of our Glenlake stainless steel tube infill railing, as well as

350 feet of our Tivoli glass-supported railing. Grade 316 stainless

steel was utilized for all exterior locations, which hold up to

environmental exposure to heat, moisture, and airborne pollutants.

Project Information

University Scientific Research Building

Case Study: Clemson Bioscience