Clean Room Construction Ltd C O M P a N

7/29/2019 Clean Room Construction Ltd C O M P a N

1/11

9 0 % o f o u r w o r k g o e s un s e e n . . .

C l e a n R o o m C o n s t r u c t i o n L t d

C O M P A N Y P R O F I L E


2/11


C o n t e n t s

Welcome 3

Who are we? 4

What services do we offer? 4

How do we operate? 5

The partnership approach 6

A network of expertise 7

Lifetime support 8

The team 9

10 reasons for choosing CRC 10

Want to find out more? 10


3/11

3

W e l c o m e

Ninety per cent of the work done by Clean Room Construction (CRC) goes unseen but we know that the ten per cent that is

seen would not operate effectively unless it was underpinned by a foundation of solid planning and design as well as sound

technical expertise.

The aim of this company profile is to give you a brief insight into how our capabilities, systems, experience and philosophy have

resulted in us being recognised as one of the leading specialists in the design, construction and maintenance of cleanrooms.

I hope that you enjoy what you read and my colleagues and I look forward to developing a longstanding business partnership with you.

Malcolm Davis

Managing Director

Clean Room Construction Ltd


4/11

As a specialist design and build main contractor, CRC can provide a full turnkey

service, including the integration of all structures, finishes, HVAC, utility plant and

distribution services. This may also include the construction of the host building

in which the facility is to be installed.

We can also provide conceptual, feasibility and front-end design studies to address all

production, technical, commercial and regulatory aspects including full validation plans.

If your project is a Greenfield or Brownfield development we can provide structural

and architectural services.

Working closely with our clients from the very outset of a project enables our experienced project teams to provide the very best

service to you.

This approach also assists us in creating

technical solutions that meet the clients

technical and timescale requirements as

well as budgetary restrictions. We adopt

the same high standards and levels ofservice for every project, whether of small

or multimillion-pound value.


4

W h o a r e w e ?

Clean Room Construction Limited is one of the UKs leading specialists

in the design and installation of clean technology and contamination control

systems.

We operate throughout the UK and Europe and have more than 30 years

experience of designing, installing, commissioning, validating and maintaining

controlled environments and equipment across all science and technology sectors.

We pride ourselves on working in close partnership with our clients to provide a one-stop solution to all our customers needs,

including the provision of a lifetime maintenance programme.

All our staff are committed to designing and producing products that will meet the toughest criteria laid down in the leading

industry standards.

We have a dedicated team of project managers and engineers who are all members of the top industry associations. Together with

administrative support staff, they use their vast project management experience and broad technical expertise to best effect, ensuring

that our customers return to us time and time again.

W h a t s e r v i c e s d o w e o f f e r ?


5/11

5

H o w d o w e o p e r a t e ?

Enquiry:

We are used to responding to all levels of enquiry detail, ranging from clients who know they need

a controlled environment but are unsure how to specify their requirement, through to clients who

have employed a professional team to produce a detailed performance specification.

Whatever the level of the initial detail, we aim to add value by bringing our extensive experience to

bear. We also ensure that, prior to entering into a contract, we have clearly specified the project

requirements, costs and timescale.

We welcome the opportunity to assist or lead the development of the project brief with you.

Contract:

We have worked under varying forms of contract from simple purchase orders to standard forms

of building and engineering contracts. The selection of contract type will normally depend upon the

size and complexity of the project as well as the clients familiarity with contract administration.

Whatever the situation, we will be pleased to advise on the most applicable contract format.

Project team:

As soon as the project is awarded our project team is appointed and fully briefed. Our standard team comprises a project

director, project manager, electrical engineer, CAD engineer, project administrator and site manager.

For the larger projects the team is augmented by additional project and CAD engineers.

The project team stays with the project from the design development stage through to completion, ensuring continuity.

Project systems:

We have well-developed project handling systems and procedures which ensure

that the project is executed to the required time, budget and quality.

Systems include:

Drawing issue and approval

Programming

Procurement scheduling

Budget control

Change control

Quality control

Health and safety

Progress reports

Commissioning and validation

Operation and maintenance manuals.


6/11


6

T h e p a r t n e r s h i p a p p r o a c h

We aim to satisfy our customers needs by providing them with solutions that are safe, effective, reliable, value for money and

meet or exceed the demands of their

regulators.

We pride ourselves on encouraging anddeveloping a close working relationship

with all our clients from the very outset of

projects and by doing this we pave the way

for an unequivocal understanding of client

and contractor roles and responsibilities.

This enables us to work together to find

the best technical solution.

Dedicated project managers are appointed

to individual clients so everyone knows who

is responsible for the management of any

given project. These project managers are

on hand to answer queries, review

developments and offer advice on an ongoing

basis during the lifetime of a programme.

All members of the project team are briefed in detail as soon as possible following receipt of the clients firm instructions.

This enables everyone to familiarise themselves with the intricacies of the project at a very early stage, paying particular

attention to the design intent and specification.

The project manager is responsible for ensuring that all subcontractors and suppliers fully understand the scope of the project,

including all health and safety requirements.

The project team is a byword for quality and ensuring that this is maintained is a particular responsibility of the site manager,

who has day-to-day control on site.


7/11

7

A n e t w o r k o f e x p e r t i s e

CRC has a long-established network of approved subcontractors who work almost exclusively for the company and are

considered an integral part of the project team. They work under the supervision of our own project engineers and site managers

and assist with the following types of work:

All our subcontractors are committed to delivering the same high standards of service associated with CRC and all observe thesame stringent health and safety regulations. Our subcontractors and suppliers undergo a yearly qualification review.

We demand the highest standards from our suppliers and subcontractors and we achieve this by forging strong relationships

with them and maintaining an open dialogue.

Confident in the knowledge that we employ the best specialist subcontractors, we are happy to assume full responsibility for

their conduct, competence and quality of work.


8/11


8

L i f e t i m e s u p p o r t

As a matter of routine, all of CRCs design materials and workmanship

(including labour and materials) are guaranteed for 12 months - subject to

proper maintenance and use - from the certified handover date.

Experience proves that, by implementing a regular maintenance programme,

downtime is minimised, resulting in increased performance and reliability.

Therefore, as far as we are concerned, your project is not finished when we

present you with the final contract handover documentation. In fact this is

usually the start of a very long relationship as we are increasingly being

asked to supply ongoing servicing and validation packages tailored to our

clients needs.

This means that, once we have handed over comprehensive technical design, operation, testing and maintenance manuals,

including commissioning and testing certificates, CRC can still provide vital support to ensure that your facility continues to

perform reliably.

Our service is not limited to projects built by us so, if you have existing facilities which require servicing or routine re-certification,

then try our service and validation department. This department offers a professional, friendly and value for money service and

has a growing portfolio of satisfied customers.

Service agreements are flexible and arranged to suit your particular needs. Any combination of the following can be included:

All certification work is carried out in accordance with and documented to

BS EN ISO 14644 Part 1 1999 and Part 2 2000.

As well as routine servicing and certification, we provide fault diagnosis, system

reviews and plant modifications, all with the full technical backup of our project

engineering department. All our validation engineers are fully trained and CTCB

accredited. Advice is also available on compliance with industry standards and health

and safety matters.

Our service and validation department can recommend a maintenance and validation

programme tailored to your individual requirements. Call our service manager,

Steve Poole, for more information.

Routine servicing of all plant and controls

Emergency call-out

Airflow testing and regulating

Room pressure testing and balancing

Air change rate verification

Particle counts

Filter leak testing

Airflow visualisation

Cleanliness recovery testing

Induction leak testing.

Service and validation team - Pictured left to right are

Marc Burnett, James Rodwell, Steve Poole and John Horne.


9/11

9

T h e t e a m

Our engineers and support staff have a wealth of experience and expertise in this specialist field and they all share the

companys passion for quality.

CRC is a firm believer in continuous professional development to ensure that colleagues remain ahead of the game in terms

of the latest industry innovations and new legislation. We also retain a specialist health and safety consultant to assist withthis process.

Every member of the team has a vital role to play in making our company one of the UKs leading contamination control specialists.

The line-up:


10/11


10

1 0 r e a s o n s f o r c h o o s i n g C R C

Clean Room Construction (London) Ltd offers you:

1. One of the UKs leading specialists with more than 30 years experience

2. Quality, friendly and professional service

3. Highly qualified dedicated project managers

4. A one-stop solution with services and products meeting the toughest industry standards and regulations

5. A partnership approach to finding the best technical solutions

6. An advanced network of internal and external expertise and experience

7. Continuous professional development of staff

8. A recognised service and validation department for lifetime maintenance and support

9. Comprehensive computerised business management systems

10. A proven track record in all science and technology sectors.

W a n t t o f i n d o u t m o r e ?If you require other information about our company please visit our website at:

www.crc-ltd.co.uk

or contact us at:


Units K1/K2, Temple Court, Knight Road, Strood, Rochester, Kent ME2 2LT. UK

Telephone: +44 (0) 1634 295111 Facsimile: +44 (0) 1634 294100 E-mail: [email protected]


11/11

9 0 % o f o u r w o r k g o e s u n s e e n . . .


Units K1/K2, Temple Court, Knight Road, Strood, Rochester, Kent ME2 2LT. UK

Telephone: +44 (0) 1634 295111 Facsimi le: +44 (0) 1634 294100 E-mai l: clean@crc- ltd.c o.uk

www.crc-ltd.co.uk

Directions:

Air:

Nearest airport: London City Airport, Royal Docks,

London E16 2PX Telephone: 020 7646 0088

International flights:

London Heathrow - Telephone: 0870 000 0123

London Gatwick - Telephone: 0870 000 2468

UK/EU flights:

Stansted Airport - Telephone: 0870 000 0303

Rail:

To Chatham Station from London Victoria/Charing Cross

Telephone: 0845 7 48 49 50 (National Rail Enquiries)

Road:

From Junction 2 on the M2 take the A228 Cuxton Road to Rochester.

After 1 / miles turn right at the first mini roundabout and bear rightas you pass under the railway bridge. Continue for approximately

250 yards to the T-junction and go straight across into Knight

Road. After a further 250 yards turn right into Temple Court.

CRC can then be found on the right hand side.

12

Clean Room Construction Ltd C O M P a N

Documents

Transcript of Clean Room Construction Ltd C O M P a N