CL-W263-PL00SW-A Pacific DP100-D5 Plus Manual 190812 · CL-W263-PL00SW-A_Pacific DP100-D5...
2
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. 1. Please carefully read the manual before beginning the installation process ! 2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. 3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either ! Installation Guide Parts List To install the DP100 in your chassis, placing a screw and washer that comes with the DP100 on every screw hole that matches the circles in below picture. 1 2 3 Distro Plate A x 1 LED Y- Cable B x 1 Washer C x 12 Screw D x 12 G1/4 Stop Plug E x 4 Wrench F x 1 Controller G x 1 Power Cable H x 1 Controller Cable I x 1 Bridge Cable J x 1 MB SYNC Cable K x 1 Velcro L x 1 Circle 1 is designed for liquid outlet, you may choose one of the ports to use. Circle 2 is designed for liquid inlet/fill, you may choose one of the ports to use. Circle 3 is the drain port. Assembly example can refer to the following figure. 4 To avoid air bubble during liquid cooling system working, please fill the reservoir with coolant to the line (Normal coolant level) 1 2 2 1 1 3 5 Connect the LED Y-Cable onto the Distro Plate. Patented 16.8 Million Color Pacific Plus DP 1 00-D5 B A
Transcript of CL-W263-PL00SW-A Pacific DP100-D5 Plus Manual 190812 · CL-W263-PL00SW-A_Pacific DP100-D5...
This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !
Installation Guide
Parts List
To install the DP100 in your
chassis, placing a screw and
washer that comes with the DP100
on every screw hole that matches
the circles in below picture.
1 2 3
Distro Plate
A x 1
LED Y-Cable
B x 1
Washer
C x 12
Screw
D x 12
G1/4 Stop Plug
E x 4
Wrench
F x 1
Controller
G x 1
Power Cable
H x 1
Controller Cable
I x 1
Bridge Cable
J x 1
MB SYNC Cable
K x 1
Velcro
L x 1
Circle 1 is designed for liquid outlet, you may
choose one of the ports to use.
Circle 2 is designed for liquid inlet/fill, you may
choose one of the ports to use.
Circle 3 is the drain port.
Assembly example can refer to
the following figure.
4
To avoid air bubble
during liquid cooling
system working, please
fill the reservoir with
coolant to the line
(Normal coolant level)
1
2 2
1
1
3
5
Connect the LED Y-Cable onto
the Distro Plate.
Patented
16.8 Million ColorPacific PlusDP100-D5
B
A
105G是 X X 雙銅單色 無無
其他特殊處理效果表面處理2
厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷
規格樣式單張 CHECK DESIGN
藍色線條為尺寸標示，請勿印刷上去！
210 mm
297 mm
刀模線
產品料號
CL-W263-PL00SW-A Pacific DP100-D5 Plus 說明書 19/08/12 A
產品名稱 印刷項目 發稿日期 版本
Poki(19/08/12)
Aan(19/08/12)
Installation Guide
6 8
7
I
Connect the reservoir cable onto the controller.
Set the DIP switch on the back side of the controller
to assign the number of the controller
NO.1
ON
1 2 3 4
NO.3
ON
1 2 3 4
NO.2
ON
1 2 3 4
NO.4
ON
1 2 3 4
NO.9
ON
1 2 3 4
NO.11
ON
1 2 3 4
NO.10
ON
1 2 3 4
NO.12
ON
1 2 3 4
NO.5
ON
1 2 3 4
NO.7
ON
1 2 3 4
NO.6
ON
1 2 3 4
NO.8
ON
1 2 3 4
9
NO.13
ON
1 2 3 4
NO.15
ON
1 2 3 4
NO.14
ON
1 2 3 4
NO.16
ON
1 2 3 4
Connect the controller cable onto the mainboard
(USB 2.0 9 pin) and controller.
10
If you want to connect two or more connectors,
you can use the bridge cable to connect the
controllers.
Connect the power cable to the 4pin Molex
connecter and controller.
H
J
© 2019 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
123 45
G GON 1
23
4
I
H
J
B
105G是 X X 雙銅單色 無無
其他特殊處理效果表面處理2
厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷
規格樣式單張 CHECK DESIGN
藍色線條為尺寸標示，請勿印刷上去！
210 mm
297 mm
刀模線
產品料號
CL-W263-PL00SW-A Pacific DP100-D5 Plus 說明書 19/08/12 A
產品名稱 印刷項目 發稿日期 版本
Poki(19/08/12)
Aan(19/08/12)
