Civil1) K. A. Patil,” Geological and Geotechnical Investigations for Structure”, International and

Journal of Earth Science and Engineering, Vol. 05 no. 02, pp 214-218,20122) K. A. Patil, “Use of Geosynthetic Material to enchance and sustain subgrade characteristics”,

International Journal of Engineering Research & Technology, Vol. No1, 20123) K. A. Patil, “Investigation of Soil and Bearing Capacity in Different Site Conditions”, IOSR

Journal of Mechanical and Civil Engineering, Vol. No. 3,37-43,20124) D. G. Regulwar,” Multi Objective Sustainable Irrigation Planning with Decision Parameters and

Decision Variables Fuzzy in Nature,”,An (Springer Netherlands) Impact Journal of water Resources Management,June2012

5) D. G. Regulwar,” Sustainable Irrigation Planning with Imprecise Parameters under Fuzzy Environment” Journal of Water Resources Management,” Springer,26(13),3871-3892,0920-4741, Sept. 2012

6) D. G. Regulwar,” Optimal Design of Water Supply Network by using Piping System Fluid flow,”Research India Publications of Environmental Engg. and Management ,3(2),49-252, 2012

7) Prof. G. K. Patil, “Removal of Hardness Using Moringa Oleifera Seed Suspension, Global,” J. of Engg. & Appl. Sciences, 2 (3), 234-236, 2012.

8) Patil, G.K. and Sadgir P.A, “Removal of hardness using MoringaOliefera seed suspension,” Global journal of Engineering & Applied Sciences, 2(3), 234-236, 2012.

9) Prof. S. S. Koranne, “Use of Graphical Technique for Stability Analysis of Embankment”, IOSR Journals, Sep-Oct. 2012.

10) D. G. Regulwar, Minimization of Cost of Cultivation using Interactive Decision Making Under Fuzzy Environment,” Taylor and Francis Group of Hydraulic Engg, Indian Society for Hydraulics, 17(2), 36-42, 0971-5010,2012.

11) D. G. Regulwar,” Modeling Multiobejective Reservoir Operation in Uncertain Parameter Environment,” Indian water works Association, 45(1), 27-35, 0970-275 x,2012.

12) D. G. Regulwar,” A Multi-objective Genetic Algorithm and Fuzzy Compromise Approach for Optimal Operation of Multipurpose Reservoir,” Hydraulics, Water Resources, Coastal and Environmental Engineering, December, 2012.

13) D. G. Regulwar,” Linear programming approach for conjunctive use of surface and ground water,” Hydraulics, Water Resources, Coastal and Environmental Engineering, December, 2012.

14) D. G. Regulwar,” Optimal Design of Water Supply Network by Using Piping System Fluidflow,” Emerging Trends in Engg. Technologies & Sciences for sustainable Development,2012.

15) D. G. Regulwar,” Decision Support System for Integrated Water Resources Management – A Case Study,” Emerging Trends in Engg. Technologies & Sciences for sustainable Development,2012.

16) U. J. Kahalekar, “Evaporation suppression from water surface using chemical films”, International journal, Volume 3, (IJERD) ISSN No 2249-3131,2013

17) K. A. Patil, “Evaluation of Bearing Capacity for Clayey Soil”, International Journal of Civil Engineering Research,. Voi. 04, No.1,29-41,2013

18) K. A. Patil, “Predication of NY values and settlement for square footings”, Electronic Journal of Geotechnical Engineering, Vol. 18,543-558,2013

19) K. A. Patil, “Study of Nonlinear Variable Parameter Muskingum-Cunge Method for Urban

Storm Water Drainage Routing”, International Journal of Civil Engineering and Applications [IJCEA], Research India Publications, Delhi, Volume 3, Number 3,78-81,2013

20) K. A. Patil,” Numerical Modeling of Ground Water Flow Using Finite Different Method”, International Journal of Civil Engineering and Applications [IJCEA], Research India Publications, Delhi, Volume 3, Number 3,27-32,2013

21) K. A. Patil, “”Experimental Estimate of Nɣ Values and Corresponding Settlements for Square Footings on Finite Layer of Sand, Geomechanics and Engineering, International Journal, Technopress, Korea, Volume 5, Number 4, 363-377,2013

22) K. A. Patil, Evaluation of Bearing Capacity for Clayey Soil, International Journal of Civil Engineering Research, Research India Publications, Delhi, Volume 5, Number 1,29-41,2013

23) K. A. Patil, Effect of flyash and RBI Grade 81 on Swelling Characteristics of Clayey Soil, International Journal of Advanced Technology in Civil Engineering, volume 2, Issue 2, 27-31,2013

24) K. A. Patil, “Effect of pond ash and RBI Grade 81 on properties of subgrade soil and base course of flexible pavement” , International Journal of Civil Science and Engineering World Academy of Science, Engineering and Technology, Volume 7, No. 12,1315-1320,2013

25) K. A. Patil, “Effect of Industrial Waste and Chemical additives on CBR Value of Clayey Soil”, International Journal of Structure and Civil Engineering Research, Volume 2, No. 4,1-5,2013

26) K. A. Patil, “Effect of Industrial Waste and RBI Grade 81 on swelling characteristics of Clayey soils”, International Journal of Architecture and Civil Engineering Research, Vol.11no.3,231-236,2013

27) K. A. Patil, “Rheological properties of recycle low density polythyelyene and polypropylene modified bitumen”, Journals of advanced technology in civil engineering, Volume 2, 24-26,2013

28) D. G. Regulwar and Gurav J.B., “Irrigation Planning with Fuzzy Parameters-An Interactive Approach,”Journal of Agricultural Science and Technology (JAST), (University of Tarbiat Modares), Vol. 15,No 5, 1261-1274, ISSN: 1680-7073, (2013).

29) Kamodkar, R.U. and Regulwar, D.G.,”Multipurpo-se Reservoir Operating Policies: A Fully Fuzzy Linear Programming Approach”, Journal of Agricultural Science and Technology (JAST), (University of Tarbiat Modares), Vol. 15,No 6, 1261-1274, ISSN: 1680-7073,2013.

30) Regulwar D.G. and Gurav J.B., “Two-Phase Multi Objective Fuzzy Linear Programming Approach for Sustainable Irrigation Planning,” Journal of Water Resources and Protection, Scientific Research, Vol.5, No.6, 642-651, ISSN Print: 1945-3094, ISSN Online: 1945-3108, (2013).

31) Regulwar D.G. and Pradhan V.S.,” “Irrigation Planning with Conjunctive use of Surface and Groundwater Using Fuzzy Resources,” Journal of Water Resources and Protection, Scientific Research,Vol.5, No.8, 816-822, ISSN Print: 1945-3094, ISSN Online: 1945-3108, (2013).

32) Harshanand K. Ghuge and Regulwar D.G., “Artificial Neural Network Method for Estimation of Missing Data,” Recent Trends in engineering & Technology -(ICRTET'2013),( SNJB's Late Sau. K. B. Jain College Of Engineering, Chandwad,),2013.

33) Sonali R. Nagargoje and Regulwar D.G.,”Delineation of watershed using ARCSWAT-A Case Study,”ICAET,2013.

34) D.G.Regulwar, “ Optimaizaton for Irrigation Planning with Minimization of Cost of Cultivation”

European Water Resourses Association(EWRA)PORTO,57-58,2013. 35) D.G.Regulwar and J.B.Gurav,” Optimal Irrigation Planning with Minimization of Cost of

Cultivation using Fuzzy Logic, Proceedings of International Conference on 35th September” IAHR World Congress, Chengdu, China,2013.

36) Gurav J.B. and Regulwar D.G., “Sustainable Irrigation Planning with Fuzzy Resources using Two-Phase Approach” Hydraulics, Water Resources, Coastal and Environmental Engineering, HYDRO-2013 IIT Madras, Chennai,2013.

37) Dr. R. M. Damgir and Sandip Hake , “Analysis of Critical Factors for BOT Highway Project in IHTS2013,” International Highway Technology Summit by China Highway &Transport Society, Beijing, China, 16-18 April 2013.

38) Dr. R. M. Damgir and Sandip hake, “Analysis of critical factors for BOT highway project in IHTS2013,” International highway technology summit by china highway and transport society, Beijing, China, 16-18 April 2013.

39) Prof. G. K. Patil, “Study on utilization of Moringa Oleifera as coagulant,” International journal of research in engineering and technology, pp. 274-276, 2013.

40) Patil, G.K. and Sadgir P.A, “Study on Utilization of MoringaOleifera as Coagulant ,” International Journal of Research in Engineering and Technology, 274-276, 2013.

41) R V Shetkar,” Implementation of Autonomy – Our Perspectives and,” The Journal of Engineering Education, 26(04), 44-53,2013.

42) K. A. Patil ,” Improvement in Properties of Subgrade Soil by Using Pond Ash and Chemical Additive,” Indian Highways, Volume 41, No.8, 39-45, ISSN: 0376-7256, 2013.

43) Kamodkar, R.U. and Regulwar, D.G., “Modeling Multiobjective Reservoir Operation in Uncertain Parameter Environment,” Journal of Indian Water Works Association, Vol.45, No.1, 27-35, Print ISSN: 0970-275X,2013.

44) R. U. Kamodkar and D. G. Regulwar, “Multipurpose Single Reservoir Operation Using Type-2 Fuzzy Logic,” Sustainable Water Resources Development and Management (SWARDAM-2013),2013

45) J.B.Gurav and D. G. Regulwar,” Rainwater Harvesting-A Case Study,” Sustainable Water Resources Development and Management (SWARDAM-2013), 179-183,2013

46) J.B.Gurav and D. G. Regulwar,” Rainfall Runoff Modeling ,” Sustainable Water Resources Development and Management (SWARDAM-2013), 259-263,2013.

47) Pradhan V. S. and Regulwar D. G.,” Assessment of Groundwater Resources for Irrigation in the Canal Command Area ,” Sustainable Water Resources Development and Management (SWARDAM-2013).

48) Pawar S. V. and Regulwar D. G., “A Parametric Approach To Optimal Reservoir Operation,” Sustainable Water Resources Development and Management (SWARDAM-2013).

49) Kamodkar R. U. and Regulwar D.G., “A Parametric Approach To Optimal Reservoir Operation,” Sustainable Water Resources Development and Management (SWARDAM-2013).

50) Gurav J. B. and Regulwar D. G., “Sustainable Irrigation Planning Using Two Phase Approach under Fuzzy Environment”, Sustainable Water Resources Development and Management (SWARDAM-2013).

51) Varade S. R. and Regulwar D.G., “State Discharge Prediction Model Using Artificial Neural Network”, Sustainable Water Resources Development and Management (SWARDAM-2013).

52) Balve P. N. and Regulwar D.G., “Optimal Operation of Reservoir Using Fuzzy If then Rules,” Sustainable Water Resources Development and Management (SWARDAM-2013).

53) K. A. Patil,” Waste plastic modified bitumen: a review,” Journal of environmental research and development, (ICST-2K14)19 -21 dec.2013.

54) G. K Patil,, “Water Purification using Natural Herbs,” Convergence of Science, Engineering and Management in Education and Research, 26-27 Sept 2013, Dayananda Sagar Institutions, Bengaluru,26-27,Sept 2013.

55) U.J. Kahalekar,” Sustainable water resources development and management,” ISBN 978-93-82880-63-9,2013.

56) G. K Patil, “Evaluation of Moringa Oleifera Seed Suspension for Water Purification” Sustainable Water Resources Development and Management (SWARDAM-2013), 30 September - 01 October 2013.

57) K. A. Patil, “Comparative study of EVA and waste polymer modified bitumen”, International journal of civil, architectural science and engineering, Vol.8 no.1,1-4,2014

58) K. A. Patil, “An experimental study on effect of waste tyre rubber on 60/70 grade bitumen”, International Journal of Structure and Civil Engineering Research,Vol. 3, 76-81, FEB.2014

59) K. A. Patil, “Estimation of Runoff by using SCS Curve Number Method and Arc GIS”, International Journal of Scientific and Engineering Research, Vol. 5, Issue 7, 1283-1287, July-2014

60) K. A. Patil, “State of the Art of Land Use Planning Using Remote Sensing and GIS”, International Journal of Scientific and Engineering Research, Volume 11, 41-47, September – October 2014.

61) K. A. Patil, “Selection of Appropriate Sites for Structures of Water Harvesting in a Watershed Using Remote Sensing and GIS,” International Journal of Emerging Technology and Advanced Engineering, Vol. No 4, 270-275, November 2014

62) K. A. Patil, “An Experimental Study on Effect of Waste Tyre Rubber on 60/70 Grade Bitumen,” International Journal of Structure and Civil Engineering Research.Volume 3, 76-81,2014

63) K. A. Patil,” Marshall Properties of Waste Polymer and Nanoclay Modified Bitumen,” FACTA Universities International Journal of Architecture and Civil Engineering, Vol.12 No. 1,1-9,2014

64) K. A. Patil, “Comparative Study of EVA and Waste Polymer Modified Bitumen”, International Journal of Civil, Architectural Science and Engineering, World Academy of Science, Vol. 8, No. 1,1-4,2014

65) Regulwar D.G.,” Statistical Downscaling of Temperature in Godavari River Sub-basin,” International Journal of Scientific Engineering and Technology, 115-120, (ISSN:2277-1581),December 2014.

66) D G Regulwar,” Water and Sediment Yield Modeling for Micro Watershed,” International Journal of Engineering Research, pp4-7, (ISSN:2319-6890),2014.

67) Dr. R.M.Damgir and P.S. Patil, “Strengthening of soil by using fly ash,” International journal of emerging technology and advanced engineering, Nol. IV, 201-205, 2250-2459, May 2014.

68) Dr. R.M.Damgir, Ahmed Naseem A.K. , S.L.Hake, “Effect of fly ash and RBI grade 81 on black cotton soil as a sub grade for flexible pavements,” International journal of innovations in engineering and technology, Vol. IV, 124-130, 2319-1058, June 2014.

69) Prof. G. K. Patil, “Water purification using bio- coagulant,” International journal of technology,

science and humanity, Volume 1, pp. 57-60, 2014.70) Patil, G.K. and Sadgir P.A., “Water Purification using Biocoagulant,” International Journal of

Technology, Science And Humanity, Volume 1, pp. 57-60, July 2014.71) Sadgir P.P., RatnparkheV.R.andSadgir P.A.,” Determination Of Residual Chlorine In Potable

Water With Applications Of Digital Image Processing Technique,” Journal of Environmental research and Development, Vol.8 No.3A, pp.755-758, Impact factor 1.613, January-March 2014.

72) R.T. Peche,Dr, S.S. Jamkar,Dr.P.S Sadgir, “Grey Water- A Potential Source of Water for Construction,” IOSR Journal of Mechanical and Civil Engineering, Volume 3, pp12-17, ISSN: 2278-1684, p-ISSN: 2320, 2014.

73) K. A. Patil,,” Comparative study of modification of properties 60/70 grade bitumen by using waste tyre and EVA,” Indian highway, VOL-42 NO. 7, 33-36, ISSN:0376-7256,2014.

74) K.A.Patil,” Rheological Properties of Nanoclay Modified Bitumen,” Indian highway, VOL-42 N. 10, 11-16,ISSN: 0376-7256,2014

75) U.J. Kahalekar Ground water quality survey, case study beed district,” International Conference on Science and technology,, July 27, 2014.

76) D.G.Regulwar,” Reservoir Operation using Linear Programming for Jayakwadi Reservoir,” International Conference on Contemporary Issues in Engineering, Technology and Computer Applications, International Association of Academicians & Researchers Pune,2014.

77) D.G.Regulwar,” Optimal Reservoir Operation using Multiobjective Fuzzy Linear Programming Approach,” International Conference on Contemporary Issues in Engineering, Technology and Computer Applications, International Association of Academicians & Researchers Pune,, July 27, 2014.

78) D.G.Regulwar,” Scenario Uncertainty in Statistical Downscaling the Precipitation,” International Conference on Advances in Civil and Mechanical Engineering Systems, (ACMES-2014), , Government College of Engineering, Amravati, 23-24 Dec.2014.

79) D.G.Regulwar, “Analysis of hydrological responses based on LULC and soil classification for watershed,” international conference on sustainable civil infra structure,asce india section, hitex, Hyderabad, 17 – 18 October, 2014.

80) D.G.Regulwar,” Sensitivity Analysis of Hydrological Model for Micro Watershed,” International Conference On Modeling Tools For Sustainable Water Resources Management, Iit Hyderabad, 28-29 DECEMBER 2014.

81) D.G.Regulwar,” Statistical Downscaling of Monthly Precipitation for River Sub-basin,” International Conference On Modeling Tools For Sustainable Water Resources Management, IIT HYDERABAD, 28-29 DECEMBER 2014.

82) D.G.Regulwar,” Water And Sediment Yield Modeling for Micro Watershed ,” 19th International Conference on Hydraulics, Water Resources And Environmental Engineering, Hydro-2014, Mnit Bhopal, 18-20 December 2014.

83) D.G.Regulwar,” Monthly Inflow Predication using WNN,” 19th International Conference on HYDRAULICS, Water Resources And Environmental Engineering, Hydro-2014, Mnit Bhopal, 18-20 December 2014.

84) R.M.Damgir and Ashish Dhomane,” Preparation of thematic maps using RS and GIS for watershade WRC-1 in Amravati, M.S. India, by Global Open university, Panji, Goa,” International conference on Innovations, changes and challenges in management, engineering

and technology,Vol. III,1-4,2249,29 may 2014.85) G. K Patil, “Assessment of Efficiency of salt extracted Moringa Oleifera as Coagulant”, Water

Quality- A Major Challenge, 11th Oct 2014, Indian Water Works Association, Bhopal Centre, 11th

Oct 2014.86) D.G.Regulwar,” Analysis of Hydrological Responses of Watershed by using SWAT model,”

National Conference on Water, Environment and Society (NCWES-2014), JNTU Hyderabad, 30 June-1 July 2014.

87) D. G. Regulwar,” Downscaling the Precipitation using SDSM,” National Conference on Water, Environment and Society (NCWES-2014), JNTU Hyderabad, 30 June-1 July 2014..

88) D. G. Regulwar,” Estimation of Evapotranspiration by Artificial Neural Network Case Study“National Conference on Water, Environment and Society (NCWES-2014), JNTU Hyderabad, 30 June-1 July 2014.

89) U. J. Kahalekar & S.S. Pathan, “Design of Optimal Water Supply Network and Its water Quality Analysis by using Water GEMS”, International Journal(IJSR), 4th April 2015

90) Regulwar D.G,” Soil Erosion Estimation of Watershed using Quantum Geographic Information System (QGIS) and Universal Soil Loss Equation (USLE),” International Journal of Science & Research, 2015 , Volume 3 (8),pp287-295,2319-7064,2015.

91) Regulwar D.G.,” Watershed Modeling using Quantum Geographic Information System (QGIS),” International Journal of Pure and Applied Research in Engineering and Technology, 2015, Volume 3 (8),pp287-295,2319-207x,May2015.

92) Regulwar D.G.,” Soil Erosion Estimation of Watershed using Quantum Geographic Information System (QGIS) and Universal Soil Loss Equation (USLE),” International Journal of Science & Research, 2015, 2319 -7064, 2015.

93) Sarda P.R. and Sadgir P.A., “Statistical Analysis for Predicting Missing Data and Developing Parameter Interrelationshipfor Jayakwadi Reservoir in Maharashtra State, India,” KSCE Journal of Civil Engineering - Springer) [SCI Impact factor 0.48]4, DOI 10.1007/s12205-015-0050-8, SCI Impact factor 0.484, 2015.

94) Sarda P.R. and Sadgir P.A., “Assessment of Multi Parameters of Water Quality in Surface Water Bodies - A Review,” International Journal for Research in Applied Science and Engineering Technology, (IJRASET), Vol.3 (8), pp.331-336, Impact factor 1.214(ISSN-2321-9653), Aug.2015.

95) Sarda P.R. and Sadgir P.A., “Computation of Water Quality Parameters and Artificial Neural Network Architecture for Modeling of Reservoir,” International journal of Innovative Research in Science, Engineering and Technology, (IJIRSET), Vol. 4 (9), Impact factor 3.59(E- ISSN: 2319-8753), Sept 2015.

96) Sarda P.R. and Sadgir P.A., “Reservoir Water Quality Modeling for COD using Artificial Neural Network,” International Journal of Engineering and Management Research(IJEMR) (E- ISSN: 2250-0758), Vol.5 (4), pp.347-353[1.08], Aug. 2015.

97) Rajesh T. Peche, Dr. Sanjay S. Jamkar, Dr. Parag A. Sadgir, “Influence Of Grey Water As Mixing Water On Properties And Strength Of Cement,” International Journal Of Technology Enhancements And Emerging Engineering Researc, Vol 3, ISSU E 05 pp 56-61, ISSN 2347-4289Impact factor 1.556, 2015.

98) Rajesh T. Peche, Dr. Sanjay S. Jamkar, Dr. Parag A. Sadgir, “Feasibility Study Of Grey Water For Mixing Cement And Morta,” International Journal of Civil, Structural, Environmental and

Infrastructure Engineering Research and Development (IJCSEIERD), Vol. 5, Issue 5, 89-98, ISSN(P): 2249-6866; ISSN(E): 2249-7978, Oct 2015.

99) Shubhada S.Koranne & Dr.S.S. Valunjkar, “Utilisation of steel Slag in Road of Marathwada Region,” International Journal of Innovation in Engineering Research and Technology, 2015.

100) U. J. Kahalekar & S. S.Pathan,” Optimal Design Water Distribution Network by using Water GEMS,” IJPRET,2(4), 2653-1644, 10- 11th April 2015.

101) K. A. Patil, ”Improvement in Properties of Subgrade Soil by Using Moorum and RBI Grade 81”, International Journal of Scientific and Engineering Research, volume 4, Issue 5, 289-292

CSE1) V.P.Kshirsagar, “Approaches for improving the performance of snort intrusion detection system”

in International journal of Computer science and informatics, ISSN(PRINT):2231-5292, vol 1 ,issue 4, 2012.

2) V.A.Chakkrawar, “Classification of lung tumour using SVM” in International journal of computational engineering research, vol 2, issue 5, Sept 2012.

3) Meghana Nagori, “Brain tumor classification using Neural network based methods” in International journal of computer science and informatics, ISSN(PRINT):2231-5292, vol 1 ,issue 4, 2012.

4) MeghanaNagori, “Face tracking and recognition in videos:HMMvs KNN” in IOSR Journal of computer engineering (IOSRJCE), vol x, issue x, 2012.

5) MeghanaNagori and A.M. Khan, “Automated characterization of brain tasks using fast ica feature extraction algorithm” in ICRTITCS, TCSC, Dec 2012.

6) MeghanaNagori, “A comparative study: Face recognition from video sequences using HMM” in IFRSA’s International journal of computing, vol 2, issue 4, Oct 2012.

7) MeghanaNagori, “Establishing Effective connectivity in Brain using Dynamic Bayesian Network” in International journal of advance research in computer and communication engineering, vol 1, issue 10, Dec 2012.

8) MeghanaNagori, “Experimental analysis of LDA and HMM” in IFRSA International journal of data warehousing and mining, vol 2, issue 3, Aug 2012.

9) V.P.Kshirsagar, “Intrusion Detection System using Genetic Algorithm and Data Mining: An overview” International journal of computer science and informatics, ISSN (PRINT):2231-5292, vol 1, issue 4, 2012.

10) P.V.Kulkarni, “Improved bandwidth utilization in 802.16 wireless network using rejected bandwidth requests first algorithm” in International journal of engineering research and technology (IJERT), vol 2,issue 1 www.ijert.org, Jan 2013.

11) V.A.Chakkrawar, “Classification of micro calcification in mammographic images using SVM’s and KMean’s” in International Conformance of electrical engg. And computer science Nainital, ISBN 978-93-82208-82-2, 7 April 2013.

12) V.A.Chakkrawar, “Classification of micro calcification in mammographic images using Gabor wavelet and discrete” in International journal of advance research in electronic and communication engg. ISSM-2278-909X May 2013.

13) V.A.Chakkrawar, “White blood cell segmentation and counting using global threshold” in International Journal of Emerging Technology and Advanced Engineering IJETAE, ISSN 2250,

Jun 2013.14) Meghana Nagori, “Detection of brain Tumor by mining f MRI images” in International journal

of Advanced research in computer and communication engineering, vol II Issue 4, April 2013.15) V.P.Kshirsagar, “A modified algorithm to verify integrity and authentication of data in virtual

networks” in International journal of advanced research in computer and communication engineering, vol- 2, issue 4, April 2013.

16) S.M.Bansode, “An efficient face recognition and retrieval using LBP and SIFT” in International journal of advanced research in computer and communication engineering, vol- 2, issue 4, April 2013.

17) MeghanaNagori, “A comparative study: Face recognition from video sequences using HMM” in IFRSA’s International journal of computing, vol 3, issue 1, Jan 2013.

18) V.A.Chakkrawar, “Detection of sharp contour element of the WBC and segmentation of two elements like nucleus and cytoplasm” in International journal of emerging trends and technology in computer science (IJETTCS), Vol 2, issue 1, Feb 2013.

19) V.A.Chakkrawar, “Review of an improved audio steganographic technique over LSB through random based approach” in IOSR journal of computer engineering (IOSR-JCE), e-ISSN:2278-0661,p-2278-8727,vol 9, issue 1, Jan-Feb 2013.

20) MeghanaNagori, “Detection of brain tumor by mining fMRI images” in International journal of advanced research in computer and communication engineering, vol-2, issue 4, April 2013.

21) MeghanaNagori, “Clustres of ayurvedic medicines using improved K-means algorithm” in UACEE International journal of computer science and its application, vol 3, issue 1, 2013.

22) MeghanaNagori, “Planned events across social media sites using association rules mining based on autocorrelation” in International journal of emerging science and engineering, (IJESE) ISSN: 2319-6378, vol 1, issue 8, June 2013.

23) MeghanaNagori, “Association rule mining algorithms for brain tumour detection” in International journal of advanced research in computer and communication engineering, vol- 2,issue 3, Mar 2013.

24) MeghanaNagori, “Finding water region in Aurangabad city using SCLD method in spatial data mining” in International journal of electronics communication and computer engineering, vol 4, issue 3, 2013.

25) Meghana Nagori, “A comparative study of image enhancement techniques” in International journal of computer applications, vol 81, 15Nov 2013.

26) V.P.Khirsagar, “Brain tumor segmentation and stage detection in brain MR images with 3D assessment” in International journal of computer applications, vol 84 no 15 ISSN 0975- 8887, Dec 2013.

27) V.A.Chakkarwar, “Smoke detection in video for early warning using static and dynamic features” in International journal of research in engineering and technology, vol 2, issue 11, Nov 2013.

28) P.V.Kulkarni, “Ubiquitous real time EGC monitoring system using android smart phone” in International journal of computer science and information technology, vol 4 ISSN0975-9646, 2013.

29) P.V Kulkarni, “Intrusion detection system based on Improved on one versus all data stream classification” in International Journal of Engineering and Advanced Technology, Vol 3 Issues 2, Dec 2013.

30) V. P. Kshirsagar and V. J. Pawar, “Examining the document image binarisation Technique for

Degraded Document images” in International Conference on Technology and Business management, Mar 2014.

31) V. A. Chakkarwar, “Improved combination of LBP plus LFDA for facial expression recognition SRC” in International Journal of Computer Applications, vol 96 no 13, Jun 2014.

32) S. M. Bansode, “Centroid initialization for K Means clustering using improved pillar algorithm” in International Journal of Advanced Research in Computer Engineering & Technology, vol 3, issue 4, April 2014.

33) P. V. Kulkarni, “Exemplar based Video in painting for occluded objects” in International Journal of Computer Applications, vol 81 no 13, Nov 2014.

34) Meghna Nagori, “Detecting activation patterns for working memory task: A study” in International Journal of Computer Applications, vol 90 no 15, Mar 2014.

35) V. J. Pawar, “An improved Binarization Technique for Degraded document image using local thresholding method” in International Journal of Pure and Applied research in Engineering and Technology, April 2014.

36) S.G.Shikalpure, “Study of election algorithm in anonymous system and improvement in ring election algorithm” in International journal; of advanced research in computer and communication engineering, 2014.

37) Meghna Nagori, “A comparative study of microarray data analysis for cancer classification” in International journal of computer applications, 2014.

38) V.P.Khirsagar, “A data mining model for money laundering detection in financial domain” in International Journal of Computer Applications, vol 85 no 16, Jan 2014.

39) P.V.Kulkarni, “A novel approach to discover user search goals using click through data” in International journal of computer science and information technology, vol 5 ISSN0975-9646, 2014.

40) V.A.Chakkarwar, “A sparse representation approach to facial expression recognition based on LBP plus LFDA” in International journal of computer science and information technology, vol 4, ISSN 0975-9646, 2014.

41) V.P.Khirsagar, “Brain tumor segmentation and stage detection in brain MR images using K AMS EM algorithm” in International journal of computer applications, vol 96 no 24 ISSN 0975- 8887, Jun 2014.

42) Meghana Nagori, “Wrapper Approach for Document Classification using Data mining: An overview” in IJIRCCE (2320-9801), Vol 2, no 12, Dec 2014.

43) P.V.Kulkarni, “An AIMD Distributed control law for Load balancing in contemt Delivery Networks” in International journal of computer science and technology, (097-8887), vol 108,no18, Dec,2014.

44) P. V. Kulkarni, “A survey on Congestion notification algorithm in Data centers” in International journal of computer science and technology, (097-8887), vol 108, no 20, Dec 2014.

45) V. A. Chakkarvar, “A review on Knowledge based Authentication Mechanism using Secure Persuasive cued click points” in International journal of research in engg. And tech, (875-878), vol 4, no 6, Dec 2014.

46) V. A. Chakkarvar, “Aspect mining model in support of drug Review” in International journal of computer science and technology, vol 4 (12), 875-878, 2014.

47) Meghana Nagori, “Clustering based attribute subset selection using FAST algorithm” in The 6th International Conference on Advances in Communication, Network & Computing, (CNC-2015),

Chennai, India, March-2015.

MCA1) S.D.Sapkal, “Scale Invariant Feature Transform Based Multimodal Biometric System with Face

and Finger: A Review” in International Journal of Computer Science and Information Security, July 2013.

2) S.D.Sapkal, “Color Content based Video Retrieval” in International Journal of Computer Applications, 2013.

3) S.D.Sapkal, “STEP-2 User Authentication for Cloud Computing” in International Journal of Engineering and Innovative, 2013.

4) S.D.Sapkal, “Audit service in data integrity in cloud” in International Conf. on Current trends and challenges in management, engineering, computer applications and technology, 2013.

5) A.K.Gulve, “A Comparative Performance Analysis of an Image Encryption Technique using Extended Hill Cipher” in International Journal of Computer Applications, (0975 – 8887) Volume 95– No.4, June 2014.

6) A.K.Gulve, “Steganography using Cryptography and Pseudo Random Numbers” in International Journal of Computer Applications, (0975 – 8887) Volume 96– No.19, June 2014.

7) A.K.Gulve, “An Image Steganography Method Hiding Secret Data into Coefficients of Integer Wavelet Transform Using Pixel Value Differencing Approach” in Mathematical Problems in Engineering, http://dx.doi.org/10.1155/2015/684824, 2015.

8) A.K.Gulve, “Utilizing Effective Way of Sketches for Content-based Image Retrieval System” in International Journal of Computer Applications, (0975 – 8887) Volume 116 – No. 15, April 2015.

9) A.K.Gulve, “A Review on Uniform Embedding For Efficient Jpeg Steganography” in International Journal of Computer Applications, (0975 – 8887) Volume 114 – No. 12, March 2015.

10) S.D.Sapkal, “Biometric Fingerprint Combination to Improve Anonymity Protection” in IOSR Journal of Computer Engineering (IOSR-JCE), e-ISSN: 2278-0661,p-ISSN: 2278-8727, Volume 17, Issue 2, Ver. V (, PP 75-78, Mar – Apr. 2015.

11) S.D.Sapkal, “A Review of Robust Multimodal Biometric Recognition using Joint Sparse Representation” in International Journal of Innovative Research in Advanced Engineering (IJIRAE), ISSN: 2349-2163 Issue 4, Volume 2, April 2015.

MECHANICAL

1) R. K. Shrivastava “ Overall increase in productivity using genetic algorithm based optimization tech. in milling process, in International journal of advances in management technology & engineering science, vol-1 issue 9, Jun-2012.

2) R. K. Shrivastava “ Two -phase pressure drop calculation in small diameter inclined tubes”, in IJSIT, ISSN 168-181, vol-1 issue 3, Jun-2012.

3) R. K. Shrivastava “ Optimization of process parameters for surface finish in wire EDM”, in International journal of advances in management technology & engineering science, vol-1, issue 8, May-2012.

4) S. A. Sonawane “ Validation of eatonite grade hard facing material in place of satellite grade for 150cc engine exhaust valve”, in IJEIT, ISSN 2277-3754, vol-2, issue 4, Oct-2012.

5) S. B. Chikalthankar “Fatigue Numerical Analysis for Connecting Rod”, in International Journal

Of Engineering Research and Applications, ISSN 2248-9622, Volume 2,Issue 6, Dec-2012.6) S. B. Chikalthankar “Effect of variable load, speed and Acceleration of Crank Shaft on Depth of

wear of Lining Thickness of Bush Bearing”, in International Journal Of Engineering and advanced technology, ISSN 2249-8958, Volume 2,Issue 1, Oct-2012.

7) S. B. Chikalthankar“Effect of Variable Load, Speed and Viscosity of Lubricating Oil on Depth of Wear of Lining Thickness of Crank Shaft Bush Bearing”, in International Journal Of Engineering Research and technology, ISSN 2278-0181, Volume 1,Issue 8, Oct-2012.

8) S. B. Chikalthankar“Improvement in yield strength of deformed steel bar by Quenching using Taguchi Method”, in IOSR Journal of Mechanical and civil Engineering, ISSN 2278-1684, Volume 2,Issue 2, Oct-2012.

9) S. B. Chikalthankar“Structural vibration (Dynamic) Analysis of the Disc Brake of Maruti-800 using F.E.A”, in Global Journal of Engineering Research and technology, ISSN 2249-3107, Volume 2,No 2, Feb-2012.

10) M.S. Harane “stress analysis & optimization of crank shaft under dynamic loading”, in international journal of engineering & technology, ISSN 0976-6359, pp459-437, vol-3, Issue 3, Dec-2012.

11) S. A.Patil “develpoment of wear analysis of carbidic ductile iron”, in Indian foundry journal, vol-58, issue -8, Aug-2012.

12) U V. Hambire “Comparison of mechanical properties of resin based dental composites with different filler types”, in Journal of material science & metallurgy, ISSN 2230-8008, Vol- 2, issue 1, 2012.

13) R. K. Shrivastava “Experimental investigation on heat transfer and friction factor of silver Nano fluid in absorber/receiver of parabolic trough collector with twisted tape inserts”, in Elsevier. 68th conference of the Italian thermal machines engineering association, pp 558-567, energy procedia 45, 2013.

14) S.A. Sonawane “dry sliding wear behaviour of cryogenic treated M2 tool steel”, in International review of applied engineering research, ISSN 2248-9979, pp 87-96, vol-3, issue 1, Jul-2013.

15) S.A. Sonawane “Failure analysis of machined component using statistical control Tools”, in International journal of engineering research & technology”, ISSN 2278-0181, pp 1903-1909, vol-2, issue 12, Dec-2013.

16) S. B.Chikhalthankar “ Influence of Machining Parameters on Electric Discharge Machining of WPS Tool Steels – an Experimental Investigation”, in International Journal Of Mechanical and production Engineering Research and development, ISSN(p) 2249-6890, ISSN(e) 2249-8001, Volume 3,Issue 5, Dec-2013.

17) S. B.Chikhalthankar “ Experimental Analysis and Study of Wear of Crankshaft Bushing Under Variable Condition”, in International Journal Of Mechanical and production Engineering Research and development, ISSN 2249-6890, Volume 3,Issue 5, Oct-2013.

18) S. B.Chikhalthankar “Analysis of Orthotropic Plate by Refined Plate Theory”, in International Journal of Engineering and advanced technology, ISSN 2249-8958, Volume 2,Issue 6, Aug-2013.

19) S. B.Chikhalthankar “Bending and Free Vibration Analysis of Isotropic Plate Using Refined Plate Theory”, in International Journal Of Industrial Engineering and management science, ISSN 2277-5056, Volume 3,Issue 2, Jun-2013.

20) S. B.Chikhalthankar“ Experimental Investigations of EDM Parameters”, in International Journal Of Engineering Research and development, E-ISSN 2278-067X, p-ISSN 2278-800X, Volume 7 ,Issue 5, Jun-2013.

21) S. B.Chikhalthankar“Predicting Effect of Flow of Lubricant, Pressure, Shaft velocity and Surface

Finish on Depth of Wear of Lining Thickness of Engine Bushing by Experimentation”, in International Journal of Engineering Research and technology, ISSN 2278-0181, Volume 7, Issue 5, May-2013.

22) S. B.Chikhalthankar“Finite Element Analysis Approach for Stress Analysis of Crankshaft under Dynamic Loading”, in International journal of scientific & engineering research, ISSN 2229-5518, Volume 7, Issue 2, Feb-2013.

23) M. S.Harane “Fatigue strength & residual stress analysis of deep rolled crank shaft”, in international journal of engineering & technology, Vol 4, issue 6, Jan-2013.

24) M. S.Harane“Effect of honing process parameter on surface quality of engine cylinder liners”, in international journal of engineering research & technology, ISSN 2278-0181, vol-4, issue 6, April-2013.

25) M. S.Harane “effect of reaming process parameters on surface roughness using taguchi method”, in international journal of engineering research & technology, ISSN 2278-0181, vol-2, issue 4, April-2013.

26) S.A.Patil “Review: effect of chemical composition on depth of penetration in TIG/A TIG welding”, in IJAMTES ISSN 2249-7455, Volu-2, issue 6, March-2013.

27) S. D. Ambekar“Optimisation of welding parameters in resistance spot welding”, in International journal of advances in management technology & engineering science, Vol-2, issue 6, March-2013.

28) P. S. Adwani “Preparation and characterization of copper oxide nanoparticles and determination of enhancement in critical heat flux”, injournal of thermal science,TSCI1406190261c, DOI-10.2298, 2014.

29) R. K. Shrivastava “Experimental study on two phase pressure drop of air-water in small diameter tubes at horizontal orientation”, in journal of Thermal Science, pp 521-532, Vol- 18, No 2.

30) R. K. Shrivastava “Review of the influences of nanoparticles on thermal conductivity, nucleate pool boiling and critical heat flux”, in journal of Heat and mass transfer, pp 0947-7411, 10.1007/s00231-014-1412-3, Aug 2014.

31) R. K. Shrivastava “Preparation and characterization of copper oxide nanoparticle and determination of enhancement in critical heat flux”, in journal of thermal science, TSCI1406190261c, DOI-10.2298, 2014.

32) S. A Sonawane “Apaper on plunge grinding cycle time optimization without hampering surface quality of deep groove ball bearing outer ring inner and outer races”, in journal of IJRE and Advance Technology, ISSN 2320-8791, vol - 2, issue 5, Nov 2014.

33) S. A Sonawane “Analysis and optimisation of boring process parameters by Using taguchi method on SAE 1541”, in International Journal of engineering science invention, ISSN 2319-6734, volu 3, issue 8 pp59-63, Aug 2014.

34) S. A Sonawane “Optimization of boring process parameters by using taguchi method”, in International journal of Engineering Research & technology, ISSN 2278-0181, volu-3, issue 08, Aug 2014.

35) S. B. Chika;thankar “Effect of Silicon Carbide Content on Tribological Properties of Aluminium Zinc Alloy Composite”, in International Journal of Engineering Research & Technology, ISSN: 2278-0181, Oct-2014

36) S. B. Chika;thankar “Investigation and Optimization of Tool Tip Temperature in Turning of OHNS”, in International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 3 Issue 10, Oct-2014.

37) S. B. Chika;thankar “Investigation And Optimization Of Various Machining ParametersAffecting The Effectiveness Of Turning: A Review”, in International Journal of Engineering and

Advanced Technology, ISSN: 2249 – 8958,Volume-3, Issue-4, April-2014.38) S. B. Chika;thankar “Comparative Study of Bearing Materials and Failure of Plain Bearings”, in

International Journal Of Mechanical Engineering Research and technology, ISSN 2278-0181, Volume 3,Issue 2, Feb-2014.

39) S. B. Chika;thankar“ A Review & Literature of Frictional & Wear Characteristics of Non-Asbestos Brake Pad Using Link Chase Machine”, in International Journal Of Mechanical Engineering Research and technology, ISSN 0976-6359, Volume 5,Issue 1, Jan-2014.

40) M. S. Harane “Effect of Chemical Composition And Austempering Temperature On Properties Of Cadi”, in International journal of advance technology in engineering and science, ISSN: 2278-0181, Vol- 3, Issue 9, Sept-2014.

41) M. S. Harane “Study of Vortex Shedding Behind TrapezoidalBluff Body by Flow Visualization Method, in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 3 Issue 9, Sept-2014.

42) M. S. Harane “Investigations of surface roughness of SS 304 using damper in CNC Turning”, in International Journal of Engineering Research & Technology, ISSN 2349-4395, Vol-2, Issue 1, July-2014.

43) M. S. Harane “ Ovat Analysis for surface finish in CNC Turning”, in International Journal of innovative technology and exploring engineering, ISSN 2278-3075, Vol-4, issue 3, Aug-2014.

44) S. A. Patil “Effect of Chemical Composition and Austempering Temperature on Properties of Cadi”, in International journal of advance technology in engineering and science, ISSN: 2278-0181, Vol- 3, Issue 9, Sept-2014.

45) S. A. Patil “ development of wear analysis of carbidic ductile iron”, in IJIRSET, vol-3, issue 2, Feb-2014.

46) Kushal Wasankar “Computer-Aided Fixture Design: A Review”, in International Journal of Advanced Engineering Research and Technology (IJAERT), ISSN No.: 2348 – 8190, Volume 2 Issue 1, April-2014.

47) Kushal Wasankar“ Finite Element Analysis of a Developed Fixturefor Shot Blasting and Zinc Coating Operation”, in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 3 Issue 9, Sept-2014.

48) S.D. Ambekar “Effects of cryogenics heat treatment & casr hardening on the wear property of 20 MnCr5”, in international conference on innovative material & structure technologies in metallurgical engineering (METECH 14 ), conference handbook P 219, Nov-2014.

ELECTRICAL1) S. R. Barahalikar and N.R. Bhasme, “New Approach For Measurement Of Load Losses In

Transformer”, ZEST2K12, March. 20122) G. N. Lamture and S.M. Shinde, “ Performance And Analysis Of Single-Phase Inverter Fed

Three-Phase Induction Motor Drives”, 20123) A. S. Bhugul and S.M. Shinde, “Assessment Of Solar Photovoltaic Generation Potential And

Estimation Of Possible Solar Power Plant Capacity In Aurangabad”, 20124) D.G.Himpalnarkar and S.M.Shinde, “Harmonic Filter”, 20125) A. S. Welankiwar and P. S. Swami, “Algorithm Development For Patial Discharge Detection

And Localization By UHF Acoustic Method-Case Study”, 20126) S.S. Dhamse and W. Z. Gandhare, “DG Technologies And Power Quality Issues In Distributed

Generation”, IOSRJEEE, vol.2, Aug. 20127) N. S. Borade and N.R. Bhasme, “Application of Brushless DC Motor as a Portable Power Tool”,

ICEECS, July. 20128) P. G. Lone , A. G. Thosar and P.S. Swami, “Comparative Study Of DGA Method With Result

Analysis Using Matlab”, Sept. 20129) Sanjit Magar and P.S. Swami, “Voltage Compensation In Distribution Network Using D-

STATCOM for Power Quality Improvement”, RTEECE, 201210) D. P. Ashtikar and P.S. Swami, “The Effect of Frame Leakage On Performance Of

Interconnecting Transformer, Monitoring By DGA- Case Study”, 201211) D. P. Ashtikar and P.S. Swami, “Frame Leakage Protection For ICT Based on DGA Analysis-an

Innovative Approach”, 201212) R.P.Suradkar and Dr.A. G. Thosar, “Enhancing The Performance of DC Motor Speed Control

Using Fuzzy Logic”, IJERT, vol. 1, Oct. 201213) N.S.Mahajan and A.A. Bhole, “Black Box Arc Modeling of High Voltage Circuit Breaker Using

MATLAB /Simulk”, IJEET, vol. 3, June. 201214) N.R.Bhasme and W.Z.Gandhare, “Power Converters For Grid Integration Of Wind Power

Systems”, IJERA, vol. 2, Aug. 201215) S. R. Karpe and V.P. Dhote, “Fuzzy Logic Based Direct Torque Control Of Induction Motor”,

IJESAT, vol. 2, Aug. 201216) S. R. Karpe and V.P. Dhote, “Direct Torque Control Of Induction Motor with Fuzzy Logic

Controller”, IJECCE, vol. 3, 201217) Manjusha More and P.S. Swami , “Life Estimation of SF6 Circuit Breaker”, vol. 2, Oct. 201318) P. V. Made and V. A. Kulkarni, “Simulation of Multilevel Inverter Based Drive”, 201319) R.P.Suradkar and Dr.A. G.Thosar, “Enhancing The Performance Of DC Motor Speed Control

Using Fuzzy Logic”, IJERT, vol. 1, Oct. 201220) M.D.Chavan, P.S.Swami, Dr.A.G.Thosar, R.B.Gharase, “Fault Detection of Induction motor

using Fuzzy Logic”, IJERT, vol.2, Dec. 201321) A.A.Patki and A.A. Bhole, “PMSG Wind Power System Connected to Grid using Z Source

Inverter” IJERT, vol. 2, May. 201322) S.S.Dhamse, “Single Tuned Passive Harmonic Filter Design for Adjustable Speed Drives”, Feb.

201323) U. N. Bidwe and S.M.Shinde , “Speed Control of 3-phase Induction Motor Using Fuzzy PID

Controller”, IJERT, vol. 2, Nov. 201324) W. Z. Gandhare and S.M.Shinde, “Harmonic Minimization in Sugar Industry Based Co-

generation plant”, IEEMA, Dec. 201325) Y.K.Kirange and S.M.Shinde “Power Quality Aspects of Eddy Current Drive For Crushing Mill

in Sugar Industry”, IJERA, vol. 3, Feb. 201326) ImranAli and V.A.Kulkarni, “Computer Oriented Load Flow Study Of Electrical S/S”, IJEAT,

vol. 2, Feb. 201327) L.V.Bagale and V.A. Kulkarni, “Modeling and Simulation of Variable Frequency Speed

Regulation Vector Control System of Induction Motor Based On Matlab”, IJEIT, vol. 2, Jan. 2013

28) P. V. Thokal and V. A. Kulkarni, “Driver Circuit For White Led Using PWM Technique”, IJERT, vol. 2, Jan. 2013

29) S.R.Karpe, B.N.Bedre and V.P.Dhote, “Doubly Fed Induction Generator in Wind mill”, IJETTC, vol. 2, Aug. 2013

30) A.S.Bhugul and Dr.A.G.Thosar, S.M.Shinde, “Performance of Standalone Solar PV-Wind Hybrid System for Supplying Power to Data Centre”, ICRTET 2014

31) P. L. Ratnani and Dr. A. G. Thosar, “Mathematical Modelling of an 3 Phase Induction Motor Using MATLAB/Simulunk”, IJMER, vol. 4, June. 2014

32) A.S. Bhugul and Dr. A. G. Thosar, “Simulation of Direct Torque Control of Induction Motor using Space Vector Modulation Methodology”, IJMER, vol. 4, May. 2014

33) P.L.Dushing and Dr. A. G. Thosar, “Study Of Design Of Superconducting Magnetic Energy Storage Coil For Power System Application”, IJERT, vol.3, March. 2014

34) Amruta Deshmukh and A.A. Bhole, “Optimized Design of Submersible Induction Motor Using Maxwell 16.0 RMXPRT”, IJEET, vol. 5, Sept. 2014

35) A.A. Bhole and A. M. Paikrao, “An Overview of Different Methods of Fault Location in Underground Cable System”, IJEET, vol. 5, March. 2014

36) A.A.Bhole and B.S.Bobdey, “Dynamic Contact Resistance Measurements on H.V. Circuit Breaker”, IJERT, vol. 3, Jan. 2014

37) Ashish Dongare and S.S.Dhamse, “MATLAB Simulation and Comparison of Single Phase to Three Phase Converter Fed Induction Motor Drive Using One and Two Rectifier” IJMER, vol. 4, May. 2014

38) S.S. Dhamse, “Simulation of Z-Source Inverter Fed Induction Motor For THD Reduction”, IRCTET, March. 2014

39) N.R.Bhasme and Madhuresh Sontakke,“Topologies of Power Converters for LED Light Applications”, IJAET, vol. 5, March. 2014

40) S. G. Shah and N.R. Bhasme, “Design of Earthing System for HV/EHV AC Substation”, IJAET, Jan. 2014

41) Atul Gajare and N.R. Bhasme, “Performance Analysis of Operating Characteristics of Single Phase Induction Motor with Blower Application”, IJAET, Jan. 2014

42) N.R. Bhasme and S.G.Shah, “Design of Earthing System for 400 kV AC Substation: A Case Study”, IJEE, 2014

43) Veena Walimbe and N.R. Bhasme, “Speed Control of Induction Motor using VHDL Implementation of PWM techniques”, IJEE, vol. 7, Nov. 2014

44) V. P. Gosavi and S.M. Shinde,“ Harmonic Study Of VFDS And Filter Design: A Case Study For Sugar Industry With Cogeneration”, IJAET, July. 2014

IT1) Prof. V.P.Gaikwad, “Harmony Data mining using instance centric classification” in International

Journal of Advance in management Technology, Engineering science, Vol. 02, 2012.2) Prof.Smita Chawan, “Background Knowledge of various Bioinformatics issues” in National

Level Technical paper Presentation Futurizm 12, Feb-12.3) Prof. V.P.Gaikwad, “Sentimental Analysis using different machine learning algorithm” in

International Research on Colloquim on contemporary Issues in commerence management Engineering & social science, Vol. 02, 2013.

4) Prof.A.N.Ghule, “An Advanced Data Transformation Algorithm for Categorical Data Protection (pg. 899 – 902)” in International Journal of Computer Science and Information Technologies, 0975-9646, Vol. 4 (6), 2013.

5) Prof.A.N.Ghule, “Color Content based Image and Video Retrieval” in International Journal of Computer Applications, International Conference on Advances in Science and Technology, 0975-9646, 2013.

6) Prof.Smita Chawan, “Color Content based Video Retrieval” in International Journal of Computer Applications, 0975 – 8887, Vol 84(11), Dec-13.

7) Prof.S.S.Laddha, “Consumer Loan Credit Risk Analyzer using Artificial Neural Network” in IJCA, ISBN: 973-93-80879-18-3, Vol 1, 2013.

8) Prof.Komal Gandle, “Intrusion Detection System Based On Improved One versus All Data Stream Classification” in International Journal of Engineering and Advanced Technology (IJEAT), 0975-3273, Vol. 3, Issue 2, Dec 13.

9) Prof. C.M.Gaikwad, “Stabilizing atmospheric turbulence in a video surveillance using dual tree complex wavelet fusion” in International Journal of Computer Applications, ISBN: 973-93-80880-35-9, Vol. 88, Feb-14.

10) Prof. C.M.Gaikwad, “Rotation Invariable Method for Currency Coin Detection” in International Journal of Computer Science and Information Technologies (IJCSIT), ISSN: 0975-9646, Vol. 5 (2), Mar- Apr 2014.

11) Prof. C.M.Gaikwad, “Intrusion Detection System Using GA” in IOSR Journal of Computer Engineering (IOSR-JCE), e-ISSN: 2278-0661, Volume 16, Issue 2, Apr. 2014.

12) Prof. C.M.Gaikwad, “Implementation of Intrusion Detection System using GA” in International journal of innovative research in electrical, electronics, instrumentation and control engineering, ISSN (Online) 2321 – 2004, Vol. 2, Issue 7, Mar-Apr 2014.

13) Prof.Smita Chawan, “Color Based Video Retrieval Using Block and Global Methods” in International Journal of Information Technology & Management Information System(IJITMIS), 0976 – 6413(Online), Vol 5(2), Jul-14.

14) Prof. C.M.Gaikwad, “Color Content based Image and Video Retrieval” in International Journal of Computer Applications (0975 – 8887) International Conference on Advances in Science and Technology (ICAST-2014), ISBN: 973-93-80885-10-2, Feb-15.

15) Prof. C.M.Gaikwad, “Comparative Study of some Audio Watermarking Techniques based on DCT, SVD, LWT and EMD Principals” in International Journal of Emerging Technology and Advanced Engineering, ISSN 2250 – 2459, Volume 5, Issue 4, Apr-15.

16) Prof.A.N.Ghule, “Efficient Indexing using EDLSH for Similarity Search Over Encrypted Data (Pg. 123-127)” in International Journal of Innovative Research in Advanced Engineering (IJIRAE), 2349-2163, 2015.

17) Prof.A.N.Ghule, “Implementing Pyramid Structure for Generating Efficient Personalized Recommendations” in International Journal of Computer Science and Information Technologies, 0975-9646, Vol. 6 (4), 2015.

18) Prof.Smita Chawan, “Color Content based Image and Video Retrieval” in International Journal of Computer Applications, 0975 – 8887, Vol 2, Feb-15.

19) Prof.Smita Chawan, “Methods of lecture Video retrieval” in International Conference on Innovations in Computer Science and Information Technology, ISBN 978-93-85100-08-6, Aug-15.

20) Prof.S.S.Laddha, “Book Related Information Retrieval using Ontology based semantic search & wordpress” in International Journal of Emerging Technology & Advanced Engineering, ISSN 2250-2459(Online),ISO 9001:2008 Certified Journal), Volume 5(1), 2015.

21) Prof.Komal Gandle, “SAP HANA Real Time Database” in Advances in Computational Research, Volume 7, Jan-15.

22) Sangita B Nemade, “An Efficient Approach to Detecting Phishing Web” in Advancements in Computer & Information Technology (NCACIT-15).

23)  Sangita B Nemade, “An Approach to Heterogeneous Database Migration” in Advancements in Computer & Information Technology (NCACIT-15).

24) Prof.K.R.Sarode, “Handwritten Digits Recognition Special Point” in International Journal of Advanced Research in Computer Science and Software Engineering, Vol 4, Issue 3.

25) Prof.K.R.Sarode, “Devnagri Handwritten Numeral Character Recognition” in International Journal of Scientific research in Computer Science Applications and Management studies , Vol.3,Issue 2.

26) Prof.K.R.Sarode, “Offline Handwritten Character Recognition by using Grid Approach” in International Journal of Application or Innovation in Engineering & Management, Vol.3, Issue4.

27) Sangita B Nemade, “Harmony Data Mining Using Instance Centric Classification” in International Conference on Current Trends and Challenges in Management, Engineering, Computer Applications and Technology.

28) Sangita B Nemade, “Sentiment Analysis using different machine learning algorithm” in International Research Colloquium on Contemporary issues in Commerce, Management, Engineering and Social Sciences.

29) Sangita B Nemade, “One Click Intent Image Search” in International Journal of Engineering and General Science Journal, ISSN 2091-2730, Vol 3, Issue 2, April 2015.

30) Sangita B Nemade, “Data warehouse with grid computing for Banking” in International Journal of futuristic machine Intelligence and its Application, Vol 1, Issue 2.

Electronics and Telecommunication1) R.P. Chaudhari,” Embedded ARM Processor based USB DAS”, Milestone2k12, C.O.E &

Technology, Jalgaon, 30 march 2012.2) R.P. Chaudhari,” ARM processor based USB data acquisition system”, CONSCIENTIA-12, 26-

27 March 2012.3) S.R. Hirekhan, “Implementation of Wireless Smart Sensor Platform for Industrial Application”,

in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 3, May – 2012.

4) S.R. Hirekhan, “Design and Implementation of Digital Trigger Circuit for Converter”, in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 3, May – 2012.

5) VM Kulkarni, AS Bhalchandra, “An overview of various techniques to reduce the Peak-to-average power ratio in multicarrier transmission systems” in Computational Intelligence & Computing Research (ICCIC), 2012 IEEE International Conference, ISBN: 978-1-4673-1342-1,pp. 1-5, 2012.

6) J.J. Javle, A.S. Bhalchandra, “The Human Identification System Using Multiple Geometrical Feature Extraction of Ear –An Innovative Approach” in International Journal of Emerging Technology and Advanced Engineering , ISSN 2250-2459, Volume 2, Issue 3, 662-666,March 2012.

7) S. S. Rautmare, A. S. Bhalchandra, “Fractals Based Clustering for CBIR” in International Journal on Computer Science and Engineering (IJCSE), ISSN : 0975-3397, Vol,. 4 No. 06, pp.

1007-1016, June 2012.8) V R Khapli, A S Bhalchandra, “Fast Encoding Technique of Transformed VQ for Effective

CBIR” in Journal of ICGST-GVIP , Vol. 12, Issue 2, pp 1-8, August 2012.9) Prof R.P. Chaudhari,”Controlling the microcontroller based systems via Ethernet”, National

Conference on Recent Trends in Engineering, 2nd March 2012.10) A.R. Karwankar, Dynanand Shilwant, “Student Monitoring By Face Recognition System”, in

International Journal of Electronics, Communication & Soft Computing Science and Engineering, ISSN: 2277-9477, Volume 2, Issue 2.

11) A.R. Karwankar, Santosh Kulkarni, “IVRS for College Automation”, in International journal and advanced research in computer and communication Engineering, ISSN : 2278 -1021, Volume 1, Issue 6, Aug- 2012.

12) Neelima R Kolhare,”MEMS:An Overview “,2nd International Conference on “Current trends and challenges in mgt, engg, computer applications and technology, DIEMS Aurangabad pp 1-6,23-24 March 2012

13) ChaitaliKasar, N. R. Kolhare,”Design of Barriumstrorium Ti RF Switch”,College of Engg Pune,Dec 2012

14) VipinGawai,N R Kolhare ,”wireless industrial compressor monitoring system using microcontroller”, 2012

15) N.R.Kolhare,”Noval Approach of designing Air Conditioner”, 2012.16) N.R.Kolhare,”Wireless data acquisition using ARM processor”, 2012.17) N.R.Kolhare,”Design and Development of MEMS Pressure Sensors for Blood Pressure

Monitoring”, 201218) N.R.Kolhare,”Navigate and Monitoring mobile robot using ARM Processor LPC 2148”, 2012.19) N.R.Kolhare,”Design and Development of MEMS Pressure Sensors for Tire 12Pressure

Monitoring”,2nd International Conference on “Current trends and challenges in mgt, engg, computer applications and technology, DIEMS Aurangabad,2012.

20) Kalpana Joshi, Nilima Kolhare, V.M.Pandharipande,”IMPLEMENTATION OF SPEECH RECOGNITION SYSTEM USING DSP PROCESSOR ADSP2181”,International Journal of Electronics Signals and Systems (IJESS) Vol-1 Iss-3, 2012.

21) N.R.Kolhare,”Measurement and Analysis of Vibration and Seismic Signal”, MPGI National Multi Conference 2012 (MPGINMC-2012) “Advancement in Electronics & Telecommunication Engineering, 7-8 April, 2012 Proceedings published by International Journal of Computer Applications®

22) N.R.Kolhare,”Measurement and Analysis of Vibration and Seismic Signal”, IJCA Proceedings on National Conference on Advancement in Electronics & Telecommunication Engineering © 2012 by IJCA Journal NCAETE - Number 4, 2012

23) N.R.Kolhare,”Implementation of speech recognition system using dsp processor adsp2181”, International Journal of Electronics Signals and Systems,

24) N.R.Kolhare,”GPS based Intelligent Urban Transportation system with integration of onboard public information system”, International Journal of Electronics, Communication & Soft Computing Science and Engineering, 2012.

25) Nilima R. Kolhare, Nitin Bhopale, ”Porting & Implementation of features of μC/OS II RTOS on Arm7 controller LPC 2148 with different IPC mechanisms”, International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 6, , ,Vol.1 - Issue 6 (August- 2012), ISSN (Print) : 2320 – 3765 ISSN (Online): 2278 – 8875,August – 2012

26) Mohammad Bagwan, S S Agrawal ,”FPGA Implementation of DWT/IDWT for Image Compression”, Conference RITS International Conference on Advancements in Engineering and Management, International.

27) Sangita Bharkad, Manesh kokare,”Fingerprint matching using M Band Wavelet transform”, International Conference on Advances in Engineering, Science and Management (ICAESM), 2012 , pp: 26 - 32, 03, Print ISBN: 978-1-4673-0213-5, IEEE International conference, March 2012.

28) V.R.Ratnaparkhe, R.R.Manthalkar, Y.V.Joshi,”Texture Classification of CT Images: A Comparative Study of Signal Processing Methods”,DIGITECH:An International Journal of Computer Science & Applications 2012,International ISSN: 2229-4597,2012.

29) Prof R.P. Chaudhari, “Microcontroller based remote monitoring and control of deluge valves in fire hydrant fire fighting system”,International Journal of Engineering Research & Technology. VOLUME-2, Issue-2, IJERT February 2013

30) N.R.Kolhare,”An Approach of Flow Measurement In Solar Water Heater Using Turbine Flow Meter”, International Journal of Computers & Technology www.cirworld.com Volume 4 No. 1,Jan - Feb, 2013

31) Prof. Nilima, R. Kolhare,”An approach of flow measurement in solar water heater using turbine flow meter”, International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 1, January- 2013

32) N. R. Kolhare, Dadsaheb Mane,”Flood Monitoring & ControlSystem: Disaster Flood Alert System Using Ultrasonic Sensor “, International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 1, January- 2013

33) Pradip S. Bhosale, N. R. Kolhare ,”A Review Paper on Design of Distributed RF MEMS Phase shifter for Aerospace Communication”, International Journal of Engineering Trends and Technology IJETT-Volume 4 Issue 3, March 2013.

34) N.R.Kolhare, “RF Cantilever Switch in Coventoreware ”,INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY 2013,22.10.2013.

35) N.R.Kolhare,”Real Time ECG Measurement System”,INDIAN JOURNAL OF APPLIED RESEARCH Volume : 3 | Issue : 9 |, Sept 2013.

36) A.R. Karwankar, Maheshku-mar Badmera, Ajinkya Nilawar, “Modified FCM approach for MR brain image segmentation”, in International Conference of Circuits, Power and Computing Technologies (ICCPCT), ISBN:978-1-4673-4921-5, DOI: 10.1109/ICCPCT.2013.6528885, pp.891-896, 20-21 March 2013.

37) P.S. Kurhe, S.S. Agrawal, “Real Time Tracking & Health Monitoring System of Remote Soldier using ARM7”, Journal International Journal of Engineering Trends and Technology ,ISSN: 2231-5381,3, International

38) RahateKunal B., Dr. A.S. Bhalchandra, S.S. Agrawal, ”VLSI Implementation of Digital Image Watermarking” ,Journal International Journal of Engineering Research and Technology, ISSN:2278-0181,International.

39) Sangita Bharkad, Manesh kokare,”Modified FFT features for fingerprint matching”, International Journal of Signal and Imaging Systems Engineering Vol. 06, issue no. 3 Print ISSN: 1748-0698 Online ISSN: 1748-0701,International journal, 2013

40) Mandar Kale , A.S. Bhalchandra, “Sensors For Landmine Detection And Techniques” in A Review,International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 1, January- 2013.

41) Kunal Rahate, A.S. Bhalchandra, Sushma Agrawal, “Hardware Implementation of Digital Image Watermarking Using VLSI Platform” in International Conference on VLSI and Signal Processing (ICVSP), 2013.

42) Sangita Bharkad, Manesh kokare,”Fingerprint matching using discreet wavelet packet transform”, Advance Computing Conference (IACC), 2013 IEEE 3rd International pp. 1183 – 1188, Print ISBN: 978-1-4673-4527-9, 04, IEEE International conference, Feb 2013.

43) Amol shirsath ,Sangita Bharkad,” A Review of Paper Currency Recognition System”, IOSR Journal of Computer Engineering (IOSR-JCE) e-ISSN: 2278-0661,Volume 10, Issue 1 (Mar. - Apr. 2013), PP 71-76 , International Journal, 00,ISSN: 2278-0661, 2013

44) Mandar Kale, V.R.Ratnaparkhe, “Sensors for landmine detection& Techniques: A Review”, International Journal of Engineering Research and Technology Vol 2 issue 1 Jan 2013, ISSN 2278 0181 01, International

45) Vinit Kharkar, V.R.Ratnaparkhe,”Haemoglobin Estimation methods: A Review of Clinical, Sensor and Image Processing Methods”, International Journal of Engineering Research and Technology Vol 2 issue 1 Jan 2013, ISSN 2278 0181,02, International.

46) Komal Khatri, V.R.Ratnaparkhe, S.S.Agrawal, A.S.Bhalchandra,”Image Processing approach for Malarial Parasite identification”, National Conference Growth of Technologies in Electronics, Computers and Telecom : Indian Perception - GTECT-2013 Mumbai, Maharashtra, India , 28 & 29 Sept 2013, National.

47) PrajktaSadgir, P.A.Sadgir, V.R.Ratnaparkhe,”Determination of residual chlorine in potable water with application of digital image processing technique”, International Congress of Environmental Research (ICER13), 19.11.13 to 20.11.13

48) M.R.Joshi, V.R.Ratnaparkhe,”Natural Disaster Alert System using GSM network”, International Journal of Engineering Research and Technology 2013, International, ISSN: 2278-0181, 2013.

49) Kulkarni S. R.,”Modified Kalman Based NLMS Algorithm for Noise Cancellation”, International Journal of Systems and Technologies, Volume 5, ISSUE1 International 2013, ISSN 0974-2107, 2013

50) A.R. Karwankar, Mayur Gore, “Human Computer Interaction using Hand Gesture Recognition”, in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 3 Issue 4, April 2014.

51) A.R. Karwankar, Vaibhav Kambale, “Emotion Recognition for Spoken Words”, in ICTBM-2014, 4122, MC3, 24th March-2014.

52) A.R. Karwankar, Rajendra Chaudhary, “Students monitoring by face recognition system”, in ICTBM-2014, 4123, WB1,26th March-2014.

53) Prof R.P. Chaudhari,”Internet Enabled Data Acquisition and device control”,International Journal of Engineering Research & Technology IJRET, Vol. 3, Issue-3; March 2014

54) Prof R.P. Chaudhari,”Student Monitoring by face recognition system”,International Conference on Technology and business Management, ICTBM-14, Organised at American University in Emirates, Dubai, ICTBM-14, 24-26 March 2014 pp.97-102

55) Neelima Kolhare,”Design and Development of K-BAND RF MEMS Devices for Satellite Communication”,International Conference on Small Science (ICSS 2014) Hong Kong,8 to 11 December 2014

56) Giri, kolhare,”WSN Based System for Irrigation and Fertigation Control in Horticulture for Semi Arid Regions”,International Journal of Engineering Research & Technology (IJERT),Vol. 3

Issue 4,ISSN: 2278-0181, April – 2014.57) Shelkar, Kolhare N R,”Design And Analysis of Hybrid Coupler”,International Journal of

Engineering Research & Technology (IJERT) Vol. 3 Issue 5, ISSN: 2278-0181, May – 2014.

58) K.M. Khatri, V.R.Ratnaparkhe, S.S. Agrawal, A.S. Bhalchandra,”Image Processing Approach for Malarial Parasite Identification”, Journal International Journal of Computer Applications, International.

59) RahateKunal B., Dr. A.S. Bhalchandra, S.S. Agrawal,”Hardware Implementation of Digital Image Watermarking Using VLSI Platform”, Conference International Conference on VLSI and Signal Processing (ICVSP) 2014, International.

60) K.M. Khatri, S.S. Agrawal,”Implementation of Discrete Cosine Transform using VLSI”, Journal International Journal of Engineering Research and Technology, ISSN: 2278-0181, International.

61) Harsha Panchariya, Sangita Bharkad,”Comparative analysis of feature extraction methods for

optic disk detection”, IOSR Journal of Computer Engineering (IOSR-JCE) Volume 16, Issue 3, Ver. III (May-Jun. 2014), PP 49-54 , Vol.16, issue 03, ISSN: 2278-0661, International Journal, 2014

62) M.P.Patil, V.R.Ratnaparkhe,”Object Counting using Image Processing: Hardware Approach” International Organization of Scientific Research Journal (IOSR), Vol. 4, Issue 2, March 2014 , 10.9790/4200-04214953 ,International.

63) SoniReddi, V.R.Ratnaparkhe,A.S.Bhalchandra,”Adaptive Digital Beam Forming using LMS Algorithm”, International Organization of Scientific Research Journal (IOSR) March 2014, International

64) Manesh Pawar, Varsha Ratnaparkhe,”Electronic Protection for Exam Paper Leakage”, International Conference on Modelling and Simulation in Engineering &Technology, on 15-16 Feb-2014 at Godavari College of Engineering, Jalgaon ,International.

65) P.P.Sadgir, V.R.Ratnaparkhe, A.S.Bhalchandra,”GPR Data Processing for Landmine Detection: A Review”, IEEE’s International Conferneces for Convergence of Technology, Pune6-8 April 2014, International

66) S.R. hirekhan, “Real Time Image Processing for Biological Apllications Through Morphological Operations using LabVIEW”, in International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 3 Issue 5, May – 2014.

67) S.B. Reddy, A.S. Bhalchandra, “Adaptive Digital Beam Forming using LMS Algorithm” in IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), Volume 9, Issue 2,Ver. IV, PP 63-68, e-ISSN: 2278-2834,p- ISSN: 2278-8735, Mar - Apr. 2014.

68) P. P. Sadgir, V. R. Ratnaparkhe, A. S. Bhalchandra, “GPR Data Processing for Landmines Detection” in A Review- IEEE International Conference on Convergence of Technology – 2014, 978-1-4799-3759-2/14/$31.00©2014 IEEE, Feb 2014.

69) S. S. Rautmare , A. S. Bhalchandra, “Bench Marking Higuchi Fractal for CBIR” in GVIP Journal, ISSN 1687-398X,volume 14 , Issue 1, PP. 21-28, August 2014.

70) S. S. Rautmare, A. S. Bhalchandra, “Human Vision Perception Simulated CBIR using Fractals and Presence Score” Accepted in GVIP Journal, November-December 2014.

71) V R Khapli, A S Bhalchandra, “Multistage VQ based Feature Vector for Effective CBIR” in GVIP Journal, , ISSN: 1687-398X ,Volume 15, Issue 1, ICGST, Delaware, USA, June 2015

72) Dr. Y.V. Joshi and NeelimaKolhare,”Design of Split SAR ADC using cadence tool”,IEEE International Conference on Smart Sensors and Systems (IC-SSS-2015), will be held in Bangalore, India , 21st to 23rd December 2015.

73) N.R.Kolhare,”MEMS switches for 0.1–40 GHz for Pico-satellite application”, Review Paper Microsystem Technologies April 2015, Volume 21, Issue 4, pp 707-717 ,First online: 06 February 2015

74) Ram D.Sarje, V. R. Ratnaparkhe,”Script Identification: An Image Processing Approach”,International Conference Multicon, 29-30 April 2015 Muthayammal Engineering College Rasipuram, Tamilnadu, International

75) Sachin Chothe, V.R.Ratnaparkhe,”Plant Identification Using Leaf Images”,International Conference Multicon, 29-30 April 2015 MuthayammalEngineering College Rasipuram, Tamilnadu, International.

76) Chandra KeshDubeym, V.R.Ratnaparkhe,”Electrochemical Synthesis of Polyaniline / Tetraphenyl Porphyrin Composite”, International Conference on Functional Materials and Microwaves, 28-30, 2015 DR.B.A.M.U. Aurangabad, International.

77) M.P.Patil, R.Ratnaparkhe, S.N.Kakarwal,”Adaptive Thresholding for Image Enhancement : Hardware Approach”, International Conference on Nascent Technologies in the Engineering fields of Mechanical, Electrical, Electronics & Telecomm, Computer and Information Technology ICNTE – 2015 (January 09-10, 2015), International.

78) Vaibhav V Kamble, Ratnadeep R Deshmukh, Anil R Karwankar, Varsha R Ratnaparkhe, Suresh A Annadate,”Emotion Recognition for Instantaneous Marathi Spoken Words”, 3rd International Conference on Frontiers of Intelligent Computing: Theory and Applications (FICTA) 20142015/1/1Springer International Publishing, International.

79) A.R. Karwankar, Vaibhav Kambale, “Emotion Recognition for Instantaneous Marathi Spoken Words”, in Springer International Publishing Switzerland, DOI: 10.1007/978-3-319-12012-6_37, Vol.2, 2015.

80) A.R. Karwankar, Deepak Chincholkar, “Dynamic Signature Verification System”, in ICNTE, 2015.

81) A.R. Karwankar, Tushar Darote, “Moving object detection and tracking using Multiple Webcam”, in ICNTE, 2015.

82) Dr. A.R. Karwankar, Sunita Ramesh Rajmane, “Voice enabled device control using arm processor”, in International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655, Dec-2015.

Applied Mechanics1) S.A. Bhalchandra and Yashodhara.S.Shiradhonkar, “Determination of properties of transversely

isotropic lamina using micromechanics approach”, 24-Jul-2012.2) Bhalchandra S.A. and Pawase Amit Bajirao, “Performance of Steel Fiber Reinforced Self

Compacting Concrete”, in International Journal of Computational Engineering Research (IJCER), Volume.2, pp1042-1046, Aug-2012.

3) Bhalchandra S.A. and P.K. Adsul, “Cost optimization of doubly reinforced rectangular beam section”, in International journal of modern Engineering research (IJMER), ISSN No-2249-6645, Volume.2, pp62-70, 2012.

4) M.G Shaikh and H.A.M.I Khan, “Governing loads for design of a tall RCC chimney”, in

international journal of IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE), ISSN- 2278-1684, pp12-19, july-2012.

5) P.D.Kumbhar and Pranesh Murnal, “Assessment of Suitability of existing Mix Design Methods of Normal Concrete for Designing High Performance Concrete Mixes”, in International Journal of Civil and Structural Engineering (IJCSE), ISSN-0976-4399, Vol.3, No.1, pp. 158-167, 2012.

6) P.D. Kumbhar and Pranesh Murnal, “Effect of relative humidity and temperature on properties of M80 grade high performance concrete”, in journal of Civil Engineering and Construction Review, Vol.25, No.5, pp.142-146, May-2012.

7) Dhananjay Joshi and Pranesh Murnal, “Performance of flat slab structure using pushover analysis”, in international journal of IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE), ISSN-2320-334x, Vol 7(6), pp 19-25, 2013.

8) Tejashree Gulve and Pranesh Murnal, “Feasibility of implementing water tank as passive tuned mass damper”, in International Journal of Innovative Technology and Exploring Engineering, IISN: 2278-3075, Vol 3 (3), pp 12-19, 2013.

9) S. A. Bhalchandra and S.V. Fegade, “Study of effect of steel fibre inclusion on geopolymer concrete”, in international journal of Sustainable techniques in civil and environmental engineering, 2013

10) R.S. Londhe* and M.F.Baig, “Non Linear Static Analysis Of Knee Bracing In Steel Frame Structures”, in international journal of IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE), e-ISSN: 2278-1684, Volume 5, Issue 4, PP 19-25, Jan. - Feb. 2013.

11) Syyed shoailddine SS and M.G Shaikh, “Finite element modelling of reinforced concrete beam column joint using ANSYS”, in International journal of structural and civil engineering research (IJSCER), ISSN- 2319-6009, Vol-2 & 3, Aug-2013.

12) Hasmi S.Shakeel and M.G Shaikh, “Effect of seismic joint in performance of multistory L-shaped building”, in international journal of IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE), EISSN-2278-1684, Vol-10, pp70-77, Dec-2013.

13) P.S patil and M.G Shaikh, “Study of effect of shear concrete in composite beam in combined bending and shear by ANSYS”, in International journal of innovative technology and exploring engineering (IJITEE), ISSN- 2278-3075, Vol-3 Issue-3, pp67-74, Aug-2013.

14) S.P Jadhav and M.G Shaikh, “Design and development of high strength heavy weight concrete using SBR”, in International journal of scientific and engineering research (IJSER), Vol – 4 Issue- 5, pp233-236, May-2013.

15) Bhalchandra S.A. and S.V. Fegade, “Study of effect of steel fiber inclusion on geopolymer concrete”, in International journal of civil engineering and applications (IJCEA), ISSN No-2249-426X, Volume.3, pp56-60, June-2013.

16) Bhalchandra S.A., “Properties of glass fiber reinforced geopolymer concrete”, in International journal of modern Engineering research (IJMER), Aug-2013.

17) Pranesh Murnal, Girish Malu, “Performance Evaluation of VFPI Subjected to Near-Fault Ground Motion Through Wavelet Excitation”, in International journal of Structural Engineering Convention-2014, Published by Bloomsbury Publishing India Pvt. Ltd, ISBN:978-9384898-72-4, pp 3136-3146, Dec-2014.

18) Sharad Joshi, Ishwar Datt Gupta, Lalitha R. Pattanur, Pranesh Murnal, “Investigating the Effect of Depth and Impedance of Foundation Rock in Seismic Analysis of Gravity Dams”, in International Journal Of Geotechnical Earthquake Engineering, Published by IGI Global, Vol-5(2), pp 1-18, July-Dec 2014.

19) Subhash V. Patankar , Yuwaraj M. Ghugal, Sanjay S. Jamkar , “Mix Design of Fly Ash Based Geopolymer Concrete”, in Book: Advances in Structural Engineering, Published by IIT Delhi, ISBN Print 978-81-322-2186-9 Online 978-81-322-2186-6 Materials Vol. 3, Part XVI, pp1619-1634, 21st Dec-2014.

20) Quazi Kashif Dr. M.B. Varma, “Effect of Blast on G+4 RCC Frame Structure”, in International Journal of Emerging Technology and Advanced Engineering (IJETE), published by Jai hind Education Society Patana, ISSN 2250-2459, Volum-4 Issue 11, pp 145- 149, Nov-2014.

21) R.C.yeole Dr. M.B. Varma, “Comparison of Mix Design of paver block using waste rounded steel aggregates and rubber pad”, in International Journal of Emerging Technology and Advanced Engineering (IJETE), published by Jai hind Education Society Patana, ISSN 2250-2459, Volum-4 Issue 10, pp523- 527,

Oct-2014.22) S.A. Bhalchandra, “Effect of Different staging configuration on seismic performance of circular elevated

water Tank”, in International Journal of Engineering Research And Applications(IJERA), ISSN:2248-9622, 8th Aug. 2014.

23) S.A. Bhalchandra, “Analysis of thermal buckling of ceramic metal functionally graded plates using refined third order shear deformation theory”, in International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, 8-Aug. 2014.

24) Deshmukh S.N and Chandiramani N.K, “LQR control of wind excited benchmark building using variable stiffness tuned mass damper”, in International Journal of Shock And Vibration, published by Hindavi Publishing Corporation, ISSN: 1875-9203, Vol. 2014 article id-156523, 12 pages, 8 april-2014.

25) S.G.Joshi, I.D.Gupta, L.R.Pattanur, P.B.Murnal, “Investigating the effects of depth and impedence of foundation rock in earthquake analysis of gravity dams”, in International Journal of Geotechnical Earthquake Engineering (IJTEA), ISSN 1947-8488, Vol 5(2), pp145-151, 2014.

26) Jangave S.K. and Murnal P.B., “Structural assessment of circular overhead water tank based on frame staging subjected to seismic loading”, in International Journal of Emerging Technology and Advanced Engineering (IJTEA), ,Vol 4(6), pp145-151, 2014.

27) P.D.Kumbhar and P.B.Murnal, “A new mix design method for high performance concrete under tropical conditions”, in international journal of Asian Journal of Civil Engineering, published by BHRC, Vol 15, No. 3, pp-467-483, 2014.

28) Salve U. L R.S. Londhe, “Effect of Curtailed Shear Wall on Storey Drift of High Rise Buildings Subjected to Seismic Loads”, in IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume no. Issue no. 411Ver.IV, pp 45-49, Jul-Aug 2014.

29) Kharat and Londhe R. S, “An Analytical Study On Seismic Performance of the Reinforced Concrete Elevated Water Tank With Alternate Frame Type Staging”, in International journal emerging technology and application in engineering, Dec-2014.

30) P.D. Kumbhar, R.R.Patil and P.B.Murnal, “Effect of relative humidity and temperature on properties of M-80 grade high performance concrete”, in journal of Civil Engineering & Construction Review,, Vol 27(9), 2014.

31) S.A. Bhalchandra and Shirin Daimi, “Analysis of thermal buckling of ceramic-metal functionally graded plates using refined third order shear deformation theory”, in International journal of engineering research and applications (IJERA), ISSN No-2248-9622, Volume-4, Page No-129-133, 8-Aug. 2014.

32) Bhalchandra S.A. and Ankita Patil, “Effect of different staging configurations on seismic performance of circular elevated water tank”, in International journal of engineering research and applications (IJERA), 8-Aug. 2014.

33) Bhalchandra S.A. and Sandip Doijad, “Seismic behaviour of RC buildings constructed on plain and sloping ground with different configurations of shear walls”, in international Journal of civil engineering and environmental technology, published by KrishiSanskrirti Publications, ISSN No-print-2349-8404 Online ISSN-2349-879X, Volume.2, Page No- 59-65, 2014.

34) Londhe R. S. and Naik C. V., “A proposed revision in national standards for limits on deleterious material (clay lumps) in fine and coarse aggregate”, in Indian Concrete Journal, Vol.88 , No. 9, pp 46-50, Sept-2014.